Texas Instruments

MAX232IDWRE4 - Dual RS-232 Transceiver | Texas Instruments

N.º da peça: MAX232IDWRE4 ✓ Ativo
5 V Vdss 8 mA Id 16-pin SOIC Package
MOQ: 1 |

MAX232IDWRE4 Visão geral

Texas Instruments MAX232IDWRE4 is a dual EIA-232 driver and receiver for converting TTL/CMOS logic levels to RS-232 signals. It operates from a single 5 V supply, supports data rates up to 120 kbit/s, accepts input voltages of ±30 V, and is packaged in a 16-pin SOIC. The device includes two transmit channels, two receive channels, and an on-chip charge-pump circuit for ±5 V RS-232 signal generation.

An RS-232 transceiver is an interface IC that bridges the logic-voltage domain of a digital system and the voltage-domain requirements of an RS-232 port. Within the interface hierarchy, it belongs to the RS-232 transceiver class, which includes drivers, receivers, and combined transceivers. This combined architecture allows one package to support bidirectional serial communication while minimizing the number of components required at each port.

The MAX232IDWRE4 operates from one 5 V supply and uses 1.0 µF charge-pump capacitors to generate the bipolar voltages required for RS-232 transmission. Its dual-driver and dual-receiver organization supports two RS-232 channels in one package. The interface can operate at rates up to 120 kbit/s, while ±30 V input tolerance improves robustness when a connected port encounters high-voltage signals. Typical supply current is approximately 8 mA.

The internal charge-pump design eliminates the need for a separate negative supply. Nevertheless, charge-pump operation can couple switching energy into adjacent circuitry, making careful capacitor placement and grounding essential. The MAX232 family is designed for legacy RS-232 equipment, industrial control interfaces, service equipment, and other systems that exchange serial commands over long or electrically noisy connections.

Typical uses include RS-232 adapters for embedded controllers, configuration and programming ports, industrial diagnostic equipment, and communication links between a host computer and peripheral controller. The 16-pin SOIC package supports conventional surface-mount assembly. Two MAX232IDWRE4 devices can provide four RS-232 channels when one transmitter and one receiver section are used for each full-duplex channel.

Place the charge-pump capacitors directly across their designated package pins and connect the device ground to the interface ground using a short return path. Keep sensitive analog or high-speed digital traces away from the charge-pump nodes. Confirm that the selected series capacitors and cables meet the voltage and bandwidth requirements of the connected RS-232 system before production release.

This product guide combines interface specifications, pin-level implementation guidance, application selection criteria, and verified drop-in alternatives. It is designed to help engineers confirm electrical compatibility, simplify PCB reuse, and identify the correct replacement before approving a design.

Alternativas drop-in para MAX232IDWRE4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX232IDWRE4 (mesmo formato e footprint) — diferindo em Maximum Data Rate, Package, Supply Voltage.

Analog Devices
Maximum Data Rate: 120 kbps
Package: 16-pin wide SOIC (WSOIC)
Supply Voltage: +5 V
Comparar com MAX232IDWRE4 →

MAX232IDWR

✅ Drop-In
📦 16-pin SOIC
5 V supply, 120 kbit/s data rate, and dual 2/2 channel configuration are unchanged at 0%; orderable suffix details differ.

📋 Alternativa de referência (fora do catálogo)

MAX232IDW

✅ Drop-In
Texas Instruments
📦 16-pin SOIC
2/2 dual driver and receiver · 2 · 2 · 120 kbps · 5 V · 4.5 V to 5.5 V · ±9 V · ±30 V

Consulte o preço

Ver ficha técnica →

MAX232CWE+T

✅ Drop-In
Analog Devices
📦 16-pin SOIC
RS-232 line-driver and receiver transceiver · 2 · 2 · Full duplex · 120 kbps · +5 V · EIA/TIA-232E, V.28, and V.24 · 16-pin wide SOIC (WSOIC)

Consulte o preço

Ver ficha técnica →

MAX232EESE+T

✅ Drop-In
Analog Devices
📦 16-pin SOIC
RS-232 transceiver · 2 · 2 · Full duplex · Up to 120 kbps · +5 V · ±15 kV human body model · EIA/TIA-232E and CCITT V.28

Consulte o preço

Ver ficha técnica →

MAX232EIDWR

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 16-pin SOIC
Dual RS-232 driver/receiver · 2 channels · 2 channels · 250 kbps · 5 V · ±9 V · ±30 V · 1.3 V

Consulte o preço

Ver ficha técnica →

MAX232IDWRE4 Especificações

Device Type Dual EIA-232 driver and receiver
Number of Drivers 2
Number of Receivers 2
Tensão de alimentação 5 V
Maximum Data Rate 120 kbit/s
RS-232 Input Voltage Tolerance ±30 V
Charge-Pump Capacitor Value 1.0 µF
Typical Supply Current 8 mA
ESD Protection 2000 V human-body model
Faixa de temperatura de operação -40 °C to +85 °C
Encapsulamento 16-pin SOIC
Contagem de pinos 16 pins
Tipo de montagem Surface mount
Transceiver Configuration 2 transmit and 2 receive channels

Configuração de pinos do MAX232IDWRE4

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pino 1 R1OUT — Receiver 1 output
Pino 2 R2OUT — Receiver 2 output
Pino 3 T1IN — Driver 1 input
Pino 4 R1IN — Receiver 1 input
Pino 5 V- — Negative charge-pump output
Pino 6 C2+ — Charge-pump capacitor 2 positive terminal
Pino 7 C2- — Charge-pump capacitor 2 negative terminal
Pino 8 V+ — Positive charge-pump output
Pino 9 C1+ — Charge-pump capacitor 1 positive terminal
Pino 10 C1- — Charge-pump capacitor 1 negative terminal
Pino 11 T2IN — Driver 2 input
Pino 12 T2OUT — Driver 2 output
Pino 13 R2IN — Receiver 2 input
Pino 14 GND — Ground
Pino 15 NC — Not connected (per datasheet)
Pino 16 T1OUT — Driver 1 output

Aplicações típicas

MAX232IDWRE4 é adequado para 6 aplicaçãos: Embedded Controller RS-232 Port, Industrial Diagnostic Equipment, RS-232 Configuration Port, Multi-Channel Serial Interface, Service and Test Equipment, Instrument Control and Data Acquisition.

🖥️

Embedded Controller RS-232 Port

The MAX232IDWRE4 fits an embedded controller that must communicate with legacy RS-232 equipment. Place the device between the controller’s TTL/CMOS UART and the external connector so the 5 V logic signals can be converted to RS-232 levels. Its two drivers and two receivers support up to two full-duplex channels, while operation up to 120 kbit/s covers many configuration and command protocols. The single 5 V supply simplifies system power design, although the charge-pump capacitors require short, direct placement to prevent switching noise from coupling into nearby circuitry.

🏭

Industrial Diagnostic Equipment

Use the MAX232IDWRE4 in industrial diagnostic equipment that exchanges commands with external service ports or test fixtures. Its -40 °C to +85 °C operating range supports many industrial environments, while ±30 V input tolerance provides additional tolerance for RS-232 connections. Two transmitters and two receivers allow multiple serial functions to share one interface IC. Route the connector-side nets through the transceiver, provide a continuous interface ground, and keep charge-pump nodes away from sensitive measurement circuitry to preserve signal integrity.

🔧

RS-232 Configuration Port

The MAX232IDWRE4 is suitable for a configuration or programming port that connects a host computer to a controller board. The 120 kbit/s maximum data rate accommodates conventional serial configuration protocols, and the integrated charge pump removes the need for a separate negative supply. Both receiver channels remain available for handshake or status signaling when both transmitter sections are unused. Use controlled impedance routing where necessary, place the 1.0 µF capacitors at the associated pins, and verify cable length and connector grounding for the deployment environment.

🌐

Multi-Channel Serial Interface

Two MAX232IDWRE4 devices can implement four full-duplex RS-232 channels when each device uses one transmit section and one receive section per port. This arrangement is useful in control cabinets and legacy communication equipment that must support several serial devices without changing the established 16-pin SOIC footprint. Keep each interface’s return ground adjacent to its signal path, separate charge-pump areas from other channels, and validate the combined bus loading and cable characteristics. The device’s 120 kbit/s capability is sufficient for many command and status links.

📡

Service and Test Equipment

The MAX232IDWRE4 can provide legacy RS-232 connectivity in service consoles, test fixtures, and laboratory adapters. Its dual-driver and dual-receiver arrangement supports separate transmit, receive, and handshake paths without requiring two single-direction interface packages. Operation from one 5 V rail simplifies adapter construction, while the 16-pin SOIC permits automated assembly. Follow the datasheet capacitor values and maintain a low-impedance ground return. For bench equipment with long cables, verify transient immunity and ground-loop behavior in addition to normal data transfer.

📊

Instrument Control and Data Acquisition

The MAX232IDWRE4 is appropriate for simple RS-232 control links between an instrument and a data-acquisition controller. At rates up to 120 kbit/s, it can carry commands, status flags, and sampled results over a conventional serial interface. The dual-channel organization allows one path for command traffic and another for return data, while the single 5 V supply reduces external power complexity. Preserve signal integrity by placing bypass and charge-pump capacitors close to the device, isolating connector transients, and using a common reference ground between connected equipment.

What is the operating voltage of MAX232IDWRE4?
The MAX232IDWRE4 operates from a single 5 V supply. According to the Texas Instruments MAX232 datasheet, its internal charge-pump circuit uses external 1.0 µF capacitors to generate the positive and negative voltages required by an RS-232 transmitter. This allows the interface to operate without a separate negative power rail. The device is intended for TTL/CMOS logic systems and includes two driver and two receiver channels.
How fast can MAX232IDWRE4 transmit RS-232 data?
The MAX232IDWRE4 supports RS-232 data rates up to 120 kbit/s. This makes it appropriate for conventional serial-control and diagnostic ports rather than high-speed differential links. According to the Texas Instruments MAX232 datasheet, the device combines two EIA-232 drivers with two receivers in one 16-pin SOIC package. Layout still matters because charge-pump switching energy can appear on nearby nodes if capacitor connections and grounding are not optimized.
Where can I download the MAX232IDWRE4 datasheet PDF?
The MAX232IDWRE4 datasheet PDF is available from the Texas Instruments product documentation linked on this page. The document identifies the device as a dual EIA-232 driver and receiver rated for operation from 5 V at up to 120 kbit/s. Use the manufacturer pin-description table when assigning PCB nets, especially for the charge-pump capacitor pins, which must not be treated as ordinary logic signals.
Where can I find the MAX232IDWRE4 pinout?
The MAX232IDWRE4 pinout is identified in the Texas Instruments MAX232 datasheet and corresponds to its 16-pin SOIC configuration. The device combines two transmit channels, two receive channels, one 5 V supply, ground, and charge-pump capacitor connections. Use the package drawing and pin-description table together so that the physical pin-1 orientation, exposed charge-pump nodes, and capacitor placement remain correct on the PCB.
What can replace the MAX232IDWRE4?
The closest same-family replacements are the MAX232IDWR, MAX232IDW, MAX232CWE+T, and MAX232EESE+T, provided their exact temperature, ESD, and suffix requirements match the original design. These devices use the same 16-pin SOIC class and implement the dual RS-232 transceiver function. A mechanical footprint match alone is not sufficient; verify supply voltage, data rate, channel count, ESD level, and operating-temperature limits before substitution.
Is the MAX232IDWRE4 the same as the MAX232IDWR?
The MAX232IDWRE4 and MAX232IDWR implement the same dual RS-232 transceiver function in a 16-pin SOIC and are closely related ordering variants. Their basic interface ratings align at 5 V operation and up to 120 kbit/s. However, suffix and orderable-temperature details can differ between the exact MPNs. Review the manufacturer ordering table for each variant before treating one as an unqualified production substitute.
When should I choose MAX232IDWRE4 over MAX232CWE+T?
Choose MAX232IDWRE4 when the design specifically requires the E4 orderable code and its established temperature and qualification profile. Consider MAX232CWE+T only after checking its exact operating-temperature range, ESD rating, and orderable code against the system requirements. Both provide a dual RS-232 interface in a 16-pin SOIC, so the decision should be based on verified suffix-specific characteristics rather than package appearance alone.
Is MAX232IDWRE4 suitable for industrial RS-232 equipment?
The MAX232IDWRE4 is suitable for many industrial RS-232 interfaces because its specified operating-temperature range extends from -40 °C to +85 °C and it accepts ±30 V inputs. It supports two transmitter and two receiver channels at up to 120 kbit/s from a single 5 V supply. Industrial suitability should still be assessed against the complete enclosure temperature, grounding, surge, and ESD requirements of the finished system.
What is the best Analog Devices equivalent for MAX232IDWRE4?
An Analog Devices equivalent cannot be selected from the available cross-reference information without an exact candidate MPN and verified 16-pin pinout. The MAX232IDWRE4 is a dual 5 V RS-232 transceiver with two drivers, two receivers, 1.0 µF charge-pump capacitors, and operation up to 120 kbit/s. Any cross-brand replacement must be checked for identical pin assignment, supply requirements, capacitance values, data rate, and protection ratings.
Where to buy MAX232IDWRE4 online?
Use the Request a Quote form on this page to request MAX232IDWRE4 availability, current lead time, and ordering information. The component is a Texas Instruments dual RS-232 transceiver in a 16-pin SOIC, with a 5 V supply and operation up to 120 kbit/s. The quote workflow keeps stock, quantity, and delivery details aligned with the exact MPN rather than another package or temperature suffix.
What is the price of MAX232IDWRE4?
Current pricing for MAX232IDWRE4 is handled through the Request a Quote form on this page. Submit the required quantity, packaging preference, and delivery location to obtain the applicable quotation. The verified product identity is the Texas Instruments 16-pin SOIC dual RS-232 transceiver rated for 5 V operation, up to 120 kbit/s, and a -40 °C to +85 °C operating-temperature range.
What is the lead time for MAX232IDWRE4?
Request the current lead time for MAX232IDWRE4 through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and packaging requirements, so it should be confirmed for the exact 16-pin SOIC orderable MPN. Engineers evaluating schedule risk should also identify acceptable manufacturer-qualified alternatives before the component is released for volume procurement.
Is MAX232IDWRE4 in stock?
Current stock for MAX232IDWRE4 is available through the Request a Quote form on this page. Include the required quantity and target delivery date so the response can reflect the exact Texas Instruments orderable MPN. Stock status should not be inferred from general marketplace listings, because different package codes, temperature grades, and order quantities represent separate inventory positions.
What are the key specifications of MAX232IDWRE4 that engineers should know?
The key specifications are a 5 V supply, dual transmit and receive channels, operation up to 120 kbit/s, ±30 V input tolerance, 1.0 µF charge-pump capacitors, approximately 8 mA typical supply current, 2000 V human-body-model ESD protection, and a 16-pin SOIC package. According to the Texas Instruments MAX232 datasheet, these features define the part as a conventional multi-drop RS-232 interface solution.
How should MAX232IDWRE4 charge-pump capacitors be placed?
Place each 1.0 µF charge-pump capacitor directly across the pins identified in the Texas Instruments pin-description table and keep those connections short. Connect the ground and supply return paths cleanly, and route high-speed or sensitive signals away from the charge-pump nodes because switching energy can create local noise. Correct capacitor placement also reduces loop area, helping the interface operate reliably at rates up to 120 kbit/s.

Dados de referência de engenharia para MAX232IDWRE4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MAX232IDWRE4 for new and existing designs that require a Texas Instruments dual RS-232 transceiver, a 5 V supply, two transmitter and two receiver channels, and operation up to 120 kbit/s in a 16-pin SOIC package. Select MAX232IDWR or MAX232IDW when the manufacturer ordering table confirms that their exact suffix, temperature grade, and protection requirements satisfy the production design. Consider MAX232CWE+T only after checking its full parameter set and qualification profile. MAX232EESE+T is attractive where its higher stated ESD rating is useful, but that protection difference must be reconciled with the system design rather than treated as an automatic improvement. No cross-brand replacement is recommended until an exact candidate MPN has verified pin-for-pin compatibility, capacitor requirements, data rate, temperature range, and protection ratings.

Comparação com alternativas

Parâmetro Este produto MAX232IDWR MAX232IDW MAX232CWE+T MAX232EESE+T MAX232EIDWR
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Driver and Receiver Count 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers

Principais diferenciais

  • Combines two complete RS-232 channels in one package (vs MC1489NG4)
  • Operates from a single 5 V rail (vs MAX232CWE+T)
  • Supports 120 kbit/s serial data transfer (vs MAX232EESE+T)

Notas de projeto

Place the 1.0 µF charge-pump capacitors directly across their designated pins using the shortest possible traces. Keep the associated V+, V-, C1+, C1-, C2+, and C2- copper areas away from receiver inputs and other sensitive signals. Short capacitor connections reduce loop area and limit the switching energy that can couple into adjacent circuitry.

Route each RS-232 driver output toward its connector and keep the receiver input path separate from noisy charge-pump nodes. Provide a continuous interface-ground connection to the connector shield or chassis ground according to the system grounding strategy. Avoid sharing narrow ground segments between the transceiver and unrelated analog or digital circuits.

Do not treat the suffix as interchangeable without checking the exact orderable MPN. MAX232IDWR, MAX232IDW, MAX232CWE+T, MAX232EESE+T, and MAX232EIDWR can differ in temperature grade, ESD protection, lead style, or ordering configuration even when their footprints and core interface functions are similar. Confirm the pin assignment, capacitor value, and electrical limits before approving a substitute.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance must be confirmed for the exact MAX232IDWRE4 orderable code using the manufacturer product documentation and declarations.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MAX232IDWRE4 datasheet MAX232IDWRE4 pinout MAX232IDWRE4 datasheet pdf Texas Instruments MAX232IDWRE4 MAX232IDWRE4 equivalent MAX232IDWRE4 replacement MAX232IDWRE4 vs MAX232IDWR MAX232IDWRE4 vs MAX232EESE+T MAX232IDWRE4 16 pin SOIC MAX232IDWRE4 120 kbit/s MAX232IDWRE4 RS-232 transceiver MAX232IDWRE4 industrial interface MAX232IDWRE4 price MAX232IDWRE4 stock MAX232IDWRE4 lead time

Componentes & termos relacionados

Texas Instruments MAX232IDWRE4 MAX232IDWR MAX232IDW MAX232CWE+T MAX232EESE+T MAX232EIDWR RS-232 transceiver EIA-232 driver EIA-232 receiver interface IC serial interface TTL logic CMOS logic charge-pump capacitor single 5 V supply 120 kbit/s ±30 V input tolerance ESD protection 16-pin SOIC SOIC package family surface mount industrial control RS-232 configuration port data acquisition
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ