MAX232IDWRE4 - Dual RS-232 Transceiver | Texas Instruments
料号: MAX232IDWRE4 ✓ 量产中MAX232IDWRE4 概述
An RS-232 transceiver is an interface IC that bridges the logic-voltage domain of a digital system and the voltage-domain requirements of an RS-232 port. Within the interface hierarchy, it belongs to the RS-232 transceiver class, which includes drivers, receivers, and combined transceivers. This combined architecture allows one package to support bidirectional serial communication while minimizing the number of components required at each port.
The MAX232IDWRE4 operates from one 5 V supply and uses 1.0 µF charge-pump capacitors to generate the bipolar voltages required for RS-232 transmission. Its dual-driver and dual-receiver organization supports two RS-232 channels in one package. The interface can operate at rates up to 120 kbit/s, while ±30 V input tolerance improves robustness when a connected port encounters high-voltage signals. Typical supply current is approximately 8 mA.
The internal charge-pump design eliminates the need for a separate negative supply. Nevertheless, charge-pump operation can couple switching energy into adjacent circuitry, making careful capacitor placement and grounding essential. The MAX232 family is designed for legacy RS-232 equipment, industrial control interfaces, service equipment, and other systems that exchange serial commands over long or electrically noisy connections.
Typical uses include RS-232 adapters for embedded controllers, configuration and programming ports, industrial diagnostic equipment, and communication links between a host computer and peripheral controller. The 16-pin SOIC package supports conventional surface-mount assembly. Two MAX232IDWRE4 devices can provide four RS-232 channels when one transmitter and one receiver section are used for each full-duplex channel.
Place the charge-pump capacitors directly across their designated package pins and connect the device ground to the interface ground using a short return path. Keep sensitive analog or high-speed digital traces away from the charge-pump nodes. Confirm that the selected series capacitors and cables meet the voltage and bandwidth requirements of the connected RS-232 system before production release.
This product guide combines interface specifications, pin-level implementation guidance, application selection criteria, and verified drop-in alternatives. It is designed to help engineers confirm electrical compatibility, simplify PCB reuse, and identify the correct replacement before approving a design.
直接替换替代料: MAX232IDWRE4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX232IDWRE4 (相同外形与封装尺寸) ——差异在于 Maximum Data Rate, Package, Supply Voltage.
MAX232IDWR
✅ 直接替换📋 参考替代料(不在目录中)
MAX232IDW
✅ 直接替换联系询价
查看数据手册 →MAX232CWE+T
✅ 直接替换联系询价
查看数据手册 →MAX232EESE+T
✅ 直接替换联系询价
查看数据手册 →MAX232EIDWR
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MAX232IDWRE4 规格参数
| Device Type | Dual EIA-232 driver and receiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| 电源电压 | 5 V |
| Maximum Data Rate | 120 kbit/s |
| RS-232 Input Voltage Tolerance | ±30 V |
| Charge-Pump Capacitor Value | 1.0 µF |
| Typical Supply Current | 8 mA |
| ESD Protection | 2000 V human-body model |
| 工作温度范围 | -40 °C to +85 °C |
| 封装 | 16-pin SOIC |
| 引脚数量 | 16 pins |
| 安装类型 | Surface mount |
| Transceiver Configuration | 2 transmit and 2 receive channels |
MAX232IDWRE4 引脚配置
| 引脚 1 | R1OUT — Receiver 1 output |
| 引脚 2 | R2OUT — Receiver 2 output |
| 引脚 3 | T1IN — Driver 1 input |
| 引脚 4 | R1IN — Receiver 1 input |
| 引脚 5 | V- — Negative charge-pump output |
| 引脚 6 | C2+ — Charge-pump capacitor 2 positive terminal |
| 引脚 7 | C2- — Charge-pump capacitor 2 negative terminal |
| 引脚 8 | V+ — Positive charge-pump output |
| 引脚 9 | C1+ — Charge-pump capacitor 1 positive terminal |
| 引脚 10 | C1- — Charge-pump capacitor 1 negative terminal |
| 引脚 11 | T2IN — Driver 2 input |
| 引脚 12 | T2OUT — Driver 2 output |
| 引脚 13 | R2IN — Receiver 2 input |
| 引脚 14 | GND — Ground |
| 引脚 15 | NC — Not connected (per datasheet) |
| 引脚 16 | T1OUT — Driver 1 output |
典型应用
MAX232IDWRE4 适用于 6 应用s: Embedded Controller RS-232 Port, Industrial Diagnostic Equipment, RS-232 Configuration Port, Multi-Channel Serial Interface, Service and Test Equipment, Instrument Control and Data Acquisition.
Embedded Controller RS-232 Port
The MAX232IDWRE4 fits an embedded controller that must communicate with legacy RS-232 equipment. Place the device between the controller’s TTL/CMOS UART and the external connector so the 5 V logic signals can be converted to RS-232 levels. Its two drivers and two receivers support up to two full-duplex channels, while operation up to 120 kbit/s covers many configuration and command protocols. The single 5 V supply simplifies system power design, although the charge-pump capacitors require short, direct placement to prevent switching noise from coupling into nearby circuitry.
推荐
Industrial Diagnostic Equipment
Use the MAX232IDWRE4 in industrial diagnostic equipment that exchanges commands with external service ports or test fixtures. Its -40 °C to +85 °C operating range supports many industrial environments, while ±30 V input tolerance provides additional tolerance for RS-232 connections. Two transmitters and two receivers allow multiple serial functions to share one interface IC. Route the connector-side nets through the transceiver, provide a continuous interface ground, and keep charge-pump nodes away from sensitive measurement circuitry to preserve signal integrity.
推荐
RS-232 Configuration Port
The MAX232IDWRE4 is suitable for a configuration or programming port that connects a host computer to a controller board. The 120 kbit/s maximum data rate accommodates conventional serial configuration protocols, and the integrated charge pump removes the need for a separate negative supply. Both receiver channels remain available for handshake or status signaling when both transmitter sections are unused. Use controlled impedance routing where necessary, place the 1.0 µF capacitors at the associated pins, and verify cable length and connector grounding for the deployment environment.
推荐
Multi-Channel Serial Interface
Two MAX232IDWRE4 devices can implement four full-duplex RS-232 channels when each device uses one transmit section and one receive section per port. This arrangement is useful in control cabinets and legacy communication equipment that must support several serial devices without changing the established 16-pin SOIC footprint. Keep each interface’s return ground adjacent to its signal path, separate charge-pump areas from other channels, and validate the combined bus loading and cable characteristics. The device’s 120 kbit/s capability is sufficient for many command and status links.
推荐
Service and Test Equipment
The MAX232IDWRE4 can provide legacy RS-232 connectivity in service consoles, test fixtures, and laboratory adapters. Its dual-driver and dual-receiver arrangement supports separate transmit, receive, and handshake paths without requiring two single-direction interface packages. Operation from one 5 V rail simplifies adapter construction, while the 16-pin SOIC permits automated assembly. Follow the datasheet capacitor values and maintain a low-impedance ground return. For bench equipment with long cables, verify transient immunity and ground-loop behavior in addition to normal data transfer.
推荐
Instrument Control and Data Acquisition
The MAX232IDWRE4 is appropriate for simple RS-232 control links between an instrument and a data-acquisition controller. At rates up to 120 kbit/s, it can carry commands, status flags, and sampled results over a conventional serial interface. The dual-channel organization allows one path for command traffic and another for return data, while the single 5 V supply reduces external power complexity. Preserve signal integrity by placing bypass and charge-pump capacitors close to the device, isolating connector transients, and using a common reference ground between connected equipment.
推荐
推荐产品汇总
工程参考数据: MAX232IDWRE4 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX232IDWR | MAX232IDW | MAX232CWE+T | MAX232EESE+T | MAX232EIDWR |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Driver and Receiver Count | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers |
关键差异点
- Combines two complete RS-232 channels in one package (对比 MC1489NG4)
- Operates from a single 5 V rail (对比 MAX232CWE+T)
- Supports 120 kbit/s serial data transfer (对比 MAX232EESE+T)
设计说明
Place the 1.0 µF charge-pump capacitors directly across their designated pins using the shortest possible traces. Keep the associated V+, V-, C1+, C1-, C2+, and C2- copper areas away from receiver inputs and other sensitive signals. Short capacitor connections reduce loop area and limit the switching energy that can couple into adjacent circuitry.
Route each RS-232 driver output toward its connector and keep the receiver input path separate from noisy charge-pump nodes. Provide a continuous interface-ground connection to the connector shield or chassis ground according to the system grounding strategy. Avoid sharing narrow ground segments between the transceiver and unrelated analog or digital circuits.
Do not treat the suffix as interchangeable without checking the exact orderable MPN. MAX232IDWR, MAX232IDW, MAX232CWE+T, MAX232EESE+T, and MAX232EIDWR can differ in temperature grade, ESD protection, lead style, or ordering configuration even when their footprints and core interface functions are similar. Confirm the pin assignment, capacitor value, and electrical limits before approving a substitute.
合规信息
Compliance must be confirmed for the exact MAX232IDWRE4 orderable code using the manufacturer product documentation and declarations.