MAX3232EIPWRG4 - Dual 250kbps RS-232 IC | Texas Instruments
N.º da peça: MAX3232EIPWRG4 ✓ AtivoMAX3232EIPWRG4 Visão geral
An RS-232 transceiver is an interface integrated circuit that converts logic-level UART signals into RS-232 line levels and converts received RS-232 levels back into CMOS-compatible logic. The MAX3232E belongs to the interface IC hierarchy, where an RS-232 transceiver combines line drivers, line receivers, voltage generation, and electrostatic-discharge protection. Its dual charge-pump design provides the positive and negative voltage levels required for single-ended RS-232 signaling without a separate negative power supply.
Key characteristics include a 3 V to 5.5 V operating supply, two driver and two receiver channels, operation to 250 kbps, and ±15 kV IEC ESD protection on the serial-port pins. The MAX3232E meets the requirements of TIA/EIA-232-F and ITU V.28. These features support compatibility with conventional PC serial ports, industrial equipment, data-acquisition systems, and embedded UART links that require protection at the connector-facing interface.
The internal charge pumps require external flying capacitors, while the driver and receiver sections use small bypass capacitors for stable operation. The MAX3232E is particularly useful when the host-side UART operates from a low-voltage rail but the external cable uses RS-232 voltage levels. Its dual-channel arrangement allows one device to carry two independently directed RS-232 signals when one line is assigned to transmit and the other to receive.
Typical applications include industrial controller-to-console connections, test and measurement equipment, POS terminals, instrumentation links, and data-logger interfaces. The MAX3232EIPWRG4 is also appropriate for designs that need a compact 16-pin TSSOP implementation rather than a larger multi-channel RS-232 family.
When laying out the PCB, keep charge-pump capacitors close to their designated pins and place the interface-side protection network near the RS-232 connector. Confirm connector-level voltage levels, ground continuity, cable routing, and device operating temperature before releasing the design. The manufacturer product page identifies the PW package as a 16-pin option rated from -40°C to 85°C.
This page combines manufacturer specifications, package and application guidance, drop-in replacement analysis, and engineering-focused design notes to support faster component selection and PCB implementation.
Alternativas drop-in para MAX3232EIPWRG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MAX3232EIPWRG4 (mesmo formato e footprint) — diferindo em Package, Supply Voltage Range, ESD Protection, Maximum Data Rate, Product Type.
MAX3232EIPWG4
✅ Drop-InConsulte o preço
Ver ficha técnica →TRS3232EIRGT
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3232CUE+T
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX3232EIPWRG4 Especificações
| Product Type | Dual RS-232 line driver and receiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Interface Standard | RS-232 |
| Standards Compliance | TIA/EIA-232-F and ITU V.28 |
| ESD Protection | ±15 kV IEC ESD protection |
| ESD Protected Pins | Serial-port connection pins, including GND |
| Charge Pump | Dual charge-pump circuit |
| Temperatura de operação | -40°C to 85°C |
| Encapsulamento | 16-pin TSSOP (PW) |
| Package Width | 4.40 mm |
| Tipo de montagem | Surface mount |
| Automotive Qualification | Qualified for automotive applications |
| External Capacitor Count | 5 |
Guia de Configuração de Pinos do MAX3232EIPWRG4 4.40 mm
Configuração de pinos para MAX3232EIPWRG4 (pacote 4.40 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MAX3232EIPWRG4.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MAX3232EIPWRG4 é adequado para 6 aplicaçãos: Industrial Controller Serial Console, Test and Measurement Equipment, Point-of-Sale and Data Terminals, Data Acquisition and Logger Systems, Embedded UART-to-RS-232 Conversion, Security and Access-Control Equipment.
Industrial Controller Serial Console
The MAX3232EIPWRG4 fits industrial controller-to-console designs that require a compact bidirectional RS-232 interface. Its 3 V to 5.5 V supply range supports low-voltage embedded processors, while the dual charge-pump circuit creates the positive and negative RS-232 levels without an external negative rail. With two drivers and two receivers, the device can carry transmit and receive paths on one 16-pin TSSOP device. The ±15 kV IEC ESD protection is particularly useful when the connector is accessible to service personnel or connected to longer field cables, although chassis grounding and connector-level protection should still follow the system requirements.
Recomendado
Test and Measurement Equipment
The MAX3232EIPWRG4 can serve older RS-232 control and measurement ports while the host controller operates from 3.3 V or 5 V. Its 250 kbps maximum data rate is appropriate for configuration commands, status reporting, and moderate-volume instrument data transfers. The two-channel arrangement reduces the number of interface packages required when both directions of a serial connection are needed. Because laboratory and production instruments may be connected to user-accessible cables, the ±15 kV IEC ESD protection offers a useful protection margin. Place the device near the connector and maintain a short ground return to limit susceptibility to externally induced transients.
Recomendado
Point-of-Sale and Data Terminals
The MAX3232EIPWRG4 is suitable for point-of-sale terminals, receipt printers, and data terminals that retain an RS-232 host interface. Its 16-pin TSSOP package supports compact board layouts, and the 3 V minimum operating supply permits use with modern embedded logic. The internal charge pumps avoid a separate negative power rail, reducing component count compared with discrete RS-232 interface circuits. A 250 kbps rate supports command traffic and transactional exchanges that do not require continuous high-bandwidth transfers. The connector-facing ±15 kV IEC ESD protection is valuable in retail equipment where cables can be handled frequently, but the final design still needs appropriate chassis grounding and enclosure controls.
Recomendado
Data Acquisition and Logger Systems
The MAX3232EIPWRG4 can connect an embedded data-acquisition controller or logger to an RS-232 instrument bus. The dual driver and receiver channels support bidirectional command and response traffic, while the 250 kbps limit accommodates many legacy sensors, programmable instruments, and laboratory modules. Operating from 3 V to 5.5 V allows the same interface family to serve both 3.3 V and 5 V control sections. For long cable runs or noisy industrial environments, route the cable through a defined connector and grounding scheme and keep the protected transceiver close to the entry point. The ±15 kV IEC rating reduces reliance on external components for pin-level ESD resilience.
Recomendado
Embedded UART-to-RS-232 Conversion
The MAX3232EIPWRG4 converts the UART logic levels of a microcontroller, DSP, or programmable controller into RS-232 line levels and restores received signals to logic levels. This makes it well suited to legacy equipment that predates USB but remains connected to a modern embedded platform. Its dual-channel organization allows one port to provide both data and control paths, while its 16-pin TSSOP package limits board area. The 250 kbps operating ceiling supports many command protocols and firmware-update links. Use the manufacturer's recommended charge-pump and bypass capacitors, and verify signal polarity, flow control, and connector pin assignment before enabling production communications.
Recomendado
Security and Access-Control Equipment
The MAX3232EIPWRG4 can bridge an access-control controller or security peripheral that uses an RS-232 service or communication port. The compact 16-pin TSSOP package is useful in panel-mounted equipment where space is constrained, and the 3 V to 5.5 V operating range supports embedded processors operating at common logic voltages. The ±15 kV IEC ESD protection is useful for connector-accessible equipment because it protects the interface pins against electrostatic discharge. The implementation should include a defined chassis or signal-ground strategy, controlled cable routing, and appropriate enclosure grounding. Where security standards impose environmental qualification requirements, those requirements must be assessed separately from the interface device's stated ESD capability.
Recomendado
Dados de referência de engenharia para MAX3232EIPWRG4 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MAX3232 | TRS3232E | MAX3232CUE+T |
|---|---|---|---|---|
| Package | 16-pin TSSOP (PW) | 16-pin TSSOP (PW) | 16-pin TSSOP (PW) | 16-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Type | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
Principais diferenciais
- Higher connector-side ESD protection (vs MAX3232)
- Directly recommended upgrade path (vs MAX3232)
- Lower-voltage host-side operation (vs MAX3232CUE+T)
Notas de projeto
Place the charge-pump capacitors and small bypass capacitors directly beside their associated MAX3232EIPWRG4 pins, with short and symmetrical connections. Keep the charge-pump current loops compact and route them away from receiver inputs and connector-side nets. Follow the capacitor values and grounding arrangement in the Texas Instruments MAX3232E data sheet because incorrect values or long return paths can impair startup and output levels.
Position the transceiver near the RS-232 connector so exposed driver and receiver pins are not routed across the PCB. Maintain a direct signal-ground return between the connector and device ground, while separating that path from switching-current and noisy motor-return routes. The manufacturer specifies ±15 kV IEC ESD protection on serial-port pins, but good layout, controlled cable entry, and an appropriate chassis-ground design remain necessary for reliable operation.
Do not assume that the 3 V minimum supply means the connector receives 3.3 V RS-232. The internal charge pumps generate the bipolar voltage levels required by RS-232. Also verify that the PCB uses the correct PW footprint, that the selected capacitors meet the data-sheet requirements, and that the UART polarity and connector assignment match the attached equipment before installing a replacement.
Informações de conformidade
The MAX3232E documentation identifies the family as qualified for automotive applications and provides ±15 kV IEC ESD protection. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for this exact ordering code is not stated in the cited manufacturer pages.