Texas Instruments

MAX3232EIPWRG4 - Dual 250kbps RS-232 IC | Texas Instruments

MPN: MAX3232EIPWRG4 ✓ 啟用中
3 V to 5.5 V Vdss TIA/EIA-232-F and ITU V.28 Rds(on) 16-pin TSSOP (PW) Package
MOQ: 1 |

MAX3232EIPWRG4 概覽

The Texas Instruments MAX3232EIPWRG4 is a dual-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply at data rates up to 250 kbps. The device includes two drivers, two receivers, a dual charge-pump circuit, and pin-to-pin ±15 kV IEC ESD protection in a 16-pin TSSOP package. It is designed to bridge a 3.3 V or 5 V asynchronous communication controller and a conventional RS-232 serial port.

An RS-232 transceiver is an interface integrated circuit that converts logic-level UART signals into RS-232 line levels and converts received RS-232 levels back into CMOS-compatible logic. The MAX3232E belongs to the interface IC hierarchy, where an RS-232 transceiver combines line drivers, line receivers, voltage generation, and electrostatic-discharge protection. Its dual charge-pump design provides the positive and negative voltage levels required for single-ended RS-232 signaling without a separate negative power supply.

Key characteristics include a 3 V to 5.5 V operating supply, two driver and two receiver channels, operation to 250 kbps, and ±15 kV IEC ESD protection on the serial-port pins. The MAX3232E meets the requirements of TIA/EIA-232-F and ITU V.28. These features support compatibility with conventional PC serial ports, industrial equipment, data-acquisition systems, and embedded UART links that require protection at the connector-facing interface.

The internal charge pumps require external flying capacitors, while the driver and receiver sections use small bypass capacitors for stable operation. The MAX3232E is particularly useful when the host-side UART operates from a low-voltage rail but the external cable uses RS-232 voltage levels. Its dual-channel arrangement allows one device to carry two independently directed RS-232 signals when one line is assigned to transmit and the other to receive.

Typical applications include industrial controller-to-console connections, test and measurement equipment, POS terminals, instrumentation links, and data-logger interfaces. The MAX3232EIPWRG4 is also appropriate for designs that need a compact 16-pin TSSOP implementation rather than a larger multi-channel RS-232 family.

When laying out the PCB, keep charge-pump capacitors close to their designated pins and place the interface-side protection network near the RS-232 connector. Confirm connector-level voltage levels, ground continuity, cable routing, and device operating temperature before releasing the design. The manufacturer product page identifies the PW package as a 16-pin option rated from -40°C to 85°C.

This page combines manufacturer specifications, package and application guidance, drop-in replacement analysis, and engineering-focused design notes to support faster component selection and PCB implementation.

直接替換替代品,適用於 MAX3232EIPWRG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MAX3232EIPWRG4 (相同外形與佔位) — 差異在於 Package, Supply Voltage Range, ESD Protection, Maximum Data Rate, Product Type.

Texas Instruments
Package: 16-pin TSSOP
Supply Voltage Range: 4.5V to 5.5V
ESD Protection: IEC 61000-4-2
比較對象 MAX3232EIPWRG4 →
Analog Devices
Package: 16-pin TSSOP
Supply Voltage Range: 3.0 V to 5.5 V
Maximum Data Rate: 1 Mbps
比較對象 MAX3232EIPWRG4 →
Texas Instruments
Package: 16-TSSOP (0.173 in, 4.40 mm width)
比較對象 MAX3232EIPWRG4 →
Texas Instruments
Package: 16-pin VQFN (RGT), 3x3 mm
ESD Protection: ±15 kV IEC ESD (bus pins, pin to pin including GND)
比較對象 MAX3232EIPWRG4 →

MAX3232EIPWG4

✅ 直接替換
Texas Instruments
📦 16-pin TSSOP (PW)
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

聯絡詢價

查看資料表 →

TRS3232EIRGT

✅ 直接替換
Texas Instruments
📦 16-pin TSSOP (PW)
RS-232 Line Driver and Receiver (Transceiver) · 2 · 2 · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD (bus pins, pin to pin including GND) · TIA/EIA-232-F · 16-pin VQFN (RGT), 3x3 mm

聯絡詢價

查看資料表 →

MAX3232CUE+T

✅ 直接替換
Analog Devices
📦 16-pin TSSOP
2/2 transceiver, full RS-232 · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · 4 × 0.1 µF · 16-pin TSSOP · Surface mount

聯絡詢價

查看資料表 →

MAX3232EIPWRG4 規格

Product Type Dual RS-232 line driver and receiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Interface Standard RS-232
Standards Compliance TIA/EIA-232-F and ITU V.28
ESD Protection ±15 kV IEC ESD protection
ESD Protected Pins Serial-port connection pins, including GND
Charge Pump Dual charge-pump circuit
工作溫度 -40°C to 85°C
封裝 16-pin TSSOP (PW)
Package Width 4.40 mm
安裝類型 Surface mount
Automotive Qualification Qualified for automotive applications
External Capacitor Count 5

MAX3232EIPWRG4 4.40 mm 腳位配置指南

MAX3232EIPWRG4(4.40 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX3232EIPWRG4 的 4.40 mm 封裝腳位圖

無詳細腳位定義資料: MAX3232EIPWRG4.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX3232EIPWRG4 適用於 6 應用s: Industrial Controller Serial Console, Test and Measurement Equipment, Point-of-Sale and Data Terminals, Data Acquisition and Logger Systems, Embedded UART-to-RS-232 Conversion, Security and Access-Control Equipment.

🏭

Industrial Controller Serial Console

The MAX3232EIPWRG4 fits industrial controller-to-console designs that require a compact bidirectional RS-232 interface. Its 3 V to 5.5 V supply range supports low-voltage embedded processors, while the dual charge-pump circuit creates the positive and negative RS-232 levels without an external negative rail. With two drivers and two receivers, the device can carry transmit and receive paths on one 16-pin TSSOP device. The ±15 kV IEC ESD protection is particularly useful when the connector is accessible to service personnel or connected to longer field cables, although chassis grounding and connector-level protection should still follow the system requirements.

🔧

Test and Measurement Equipment

The MAX3232EIPWRG4 can serve older RS-232 control and measurement ports while the host controller operates from 3.3 V or 5 V. Its 250 kbps maximum data rate is appropriate for configuration commands, status reporting, and moderate-volume instrument data transfers. The two-channel arrangement reduces the number of interface packages required when both directions of a serial connection are needed. Because laboratory and production instruments may be connected to user-accessible cables, the ±15 kV IEC ESD protection offers a useful protection margin. Place the device near the connector and maintain a short ground return to limit susceptibility to externally induced transients.

🖥️

Point-of-Sale and Data Terminals

The MAX3232EIPWRG4 is suitable for point-of-sale terminals, receipt printers, and data terminals that retain an RS-232 host interface. Its 16-pin TSSOP package supports compact board layouts, and the 3 V minimum operating supply permits use with modern embedded logic. The internal charge pumps avoid a separate negative power rail, reducing component count compared with discrete RS-232 interface circuits. A 250 kbps rate supports command traffic and transactional exchanges that do not require continuous high-bandwidth transfers. The connector-facing ±15 kV IEC ESD protection is valuable in retail equipment where cables can be handled frequently, but the final design still needs appropriate chassis grounding and enclosure controls.

📊

Data Acquisition and Logger Systems

The MAX3232EIPWRG4 can connect an embedded data-acquisition controller or logger to an RS-232 instrument bus. The dual driver and receiver channels support bidirectional command and response traffic, while the 250 kbps limit accommodates many legacy sensors, programmable instruments, and laboratory modules. Operating from 3 V to 5.5 V allows the same interface family to serve both 3.3 V and 5 V control sections. For long cable runs or noisy industrial environments, route the cable through a defined connector and grounding scheme and keep the protected transceiver close to the entry point. The ±15 kV IEC rating reduces reliance on external components for pin-level ESD resilience.

📱

Embedded UART-to-RS-232 Conversion

The MAX3232EIPWRG4 converts the UART logic levels of a microcontroller, DSP, or programmable controller into RS-232 line levels and restores received signals to logic levels. This makes it well suited to legacy equipment that predates USB but remains connected to a modern embedded platform. Its dual-channel organization allows one port to provide both data and control paths, while its 16-pin TSSOP package limits board area. The 250 kbps operating ceiling supports many command protocols and firmware-update links. Use the manufacturer's recommended charge-pump and bypass capacitors, and verify signal polarity, flow control, and connector pin assignment before enabling production communications.

🔒

Security and Access-Control Equipment

The MAX3232EIPWRG4 can bridge an access-control controller or security peripheral that uses an RS-232 service or communication port. The compact 16-pin TSSOP package is useful in panel-mounted equipment where space is constrained, and the 3 V to 5.5 V operating range supports embedded processors operating at common logic voltages. The ±15 kV IEC ESD protection is useful for connector-accessible equipment because it protects the interface pins against electrostatic discharge. The implementation should include a defined chassis or signal-ground strategy, controlled cable routing, and appropriate enclosure grounding. Where security standards impose environmental qualification requirements, those requirements must be assessed separately from the interface device's stated ESD capability.

What is the MAX3232EIPWRG4 used for?
The MAX3232EIPWRG4 is a dual-channel RS-232 transceiver that connects a low-voltage UART controller to a conventional RS-232 port. It combines two line drivers, two line receivers, and a dual charge-pump circuit in a 16-pin TSSOP package. According to the Texas Instruments MAX3232E product page, it operates from 3 V to 5.5 V and supports data rates up to 250 kbps, making it suitable for industrial, instrumentation, console, and embedded serial interfaces.
What are the key specifications of MAX3232EIPWRG4?
The MAX3232EIPWRG4 provides two RS-232 drivers, two receivers, a 3 V to 5.5 V supply range, and operation up to 250 kbps. Its interface pins feature ±15 kV IEC ESD protection, including the ground connection associated with serial-port pins. The Texas Instruments MAX3232E product page also identifies TIA/EIA-232-F and ITU V.28 compliance, while the package is a 16-pin TSSOP designed for surface-mount assembly.
Where can I download the MAX3232EIPWRG4 datasheet PDF?
The MAX3232EIPWRG4 datasheet is accessible through the official Texas Instruments MAX3232E product page and part-details listing. The product documentation includes the MAX3232E data sheet, identified as Rev. E, in PDF and HTML formats. Open the manufacturer datasheet to review the complete pin description, recommended charge-pump capacitor values, electrical characteristics, ESD test conditions, and typical application circuit before finalizing a PCB layout.
Where can I find the MAX3232EIPWRG4 pinout?
The MAX3232EIPWRG4 pinout is documented in the pin-description table and package drawings contained in the Texas Instruments MAX3232E data sheet. The device is offered in the 16-pin PW TSSOP package, and the product page identifies 16 package pins. Use the manufacturer pin-description table when assigning PCB nets because the charge-pump capacitors, supply pins, driver outputs, receiver inputs, and enable functions must follow the exact device documentation.
Is MAX3232EIPWRG4 a 3.3 V RS-232 interface?
The MAX3232EIPWRG4 operates from a 3 V to 5.5 V supply, so it supports both 3.3 V and 5 V host-side UART systems. The 3 V minimum supply does not imply a 3.3 V-level RS-232 signal at the connector; the internal charge pumps generate the positive and negative voltages required by the RS-232 standard. Texas Instruments specifies operation up to 250 kbps and TIA/EIA-232-F and ITU V.28 compliance for this interface function.
What is the difference between MAX3232E and MAX3232?
The MAX3232E is the improved, drop-in replacement recommended by Texas Instruments for the MAX3232, with the principal distinction being enhanced ±15 kV IEC ESD protection. Both devices provide dual RS-232 driver and receiver channels suitable for a comparable 16-pin interface implementation. The exact ordering suffix and exposed-pad details should still be checked against the package drawings before substituting one orderable part number for another.
MAX3232EIPWRG4 vs MAX3232CUE+T - which is better?
The MAX3232EIPWRG4 is the stronger choice when connector-facing ESD robustness is important because the MAX3232E provides ±15 kV IEC ESD protection. The MAX3232CUE+T is a lower-protection member of the related MAX3232 family and should be selected only when its documented electrical limits fit the design. Both provide the familiar dual RS-232 transceiver function, but package, temperature, protection, and ordering requirements must be compared before treating either device as interchangeable.
When should I choose MAX3232EIPWRG4 over MAX3232?
Choose the MAX3232EIPWRG4 when an RS-232 connector may be exposed to electrostatic discharge and pin-to-pin protection of ±15 kV is a stated requirement. Choose the original MAX3232 when the application does not need the enhanced MAX3232E protection and its protection limits satisfy the system risk assessment. Both remain viable for dual-channel RS-232 designs, but protection capability, operating grade, package details, and qualification requirements should drive the decision.
Is MAX3232EIPWRG4 suitable for industrial equipment?
The MAX3232EIPWRG4 is suitable for many industrial serial-interface applications because its manufacturer part information identifies a -40°C to 85°C operating range and automotive qualification for the MAX3232E family. The device supports the TIA/EIA-232-F and ITU V.28 interface requirements at rates up to 250 kbps. Final suitability should also account for the enclosure, cable exposure, surge environment, grounding strategy, and production-test requirements of the finished equipment.
What can replace the MAX3232EIPWRG4?
The MAX3232 and TRS3232E are closely related drop-in choices for a design based on the MAX3232EIPWRG4, while the MAX3232CUE+T offers a related alternative with lower ESD-protection capability. Texas Instruments identifies the MAX3232E as its improved direct drop-in replacement for the MAX3232. Before replacement, verify the exact package drawing, pin functions, charge-pump capacitor values, temperature range, and required ESD rating against the original design.
Can MAX3232CUE+T replace MAX3232EIPWRG4?
The MAX3232CUE+T may fit the same general RS-232 circuit class, but it should not replace the MAX3232EIPWRG4 without checking its lower ESD-protection rating and complete package specification. The MAX3232EIPWRG4 provides ±15 kV IEC ESD protection, while the MAX3232C family is associated with reduced protection. If the system requires the MAX3232E protection level, retain the MAX3232E or use another candidate explicitly documented for the same footprint and protection.
How should the MAX3232EIPWRG4 charge-pump capacitors be placed?
Place the charge-pump capacitors close to their designated pins and keep the associated traces short, as specified in the Texas Instruments MAX3232E application information. Keep the high-current switching-capacitor loops compact and route them away from sensitive receiver inputs and connector-side traces. The exact capacitor values and tolerances should follow the manufacturer data sheet, while the PCB should preserve a clean ground return between the transceiver and the RS-232 connector.
Does MAX3232EIPWRG4 require a negative supply?
No external negative supply is required for the MAX3232EIPWRG4. Its internal dual charge-pump circuit uses the 3 V to 5.5 V supply to generate the positive and negative voltages required for RS-232 signaling. The manufacturer application circuit requires external charge-pump capacitors and small bypass capacitors. Follow the recommended capacitor values and layout from the datasheet because incorrect values can affect startup behavior, output levels, or signal integrity.
Is MAX3232EIPWRG4 RoHS compliant?
The RoHS status for the exact MAX3232EIPWRG4 ordering code is not explicitly stated on the manufacturer pages cited for this product. Compliance for the MAX3232E family should not automatically be treated as confirmation for every package, temperature, and packaging suffix without checking the exact orderable part. Review the current manufacturer compliance declaration or product documentation for MAX3232EIPWRG4 before using the component in a formally controlled bill of materials.
How do I buy MAX3232EIPWRG4 and check its lead time?
Use the Request a Quote form on this page to request current price, stock, minimum order quantity, lead time, and delivery options for the MAX3232EIPWRG4. The part is listed as an active Texas Instruments device in a 16-pin TSSOP package, but commercial conditions can change by date, quantity, and packaging configuration. Providing the required quantity and target delivery schedule allows the quote request to be matched to the correct orderable configuration.

工程參考資料,適用於 MAX3232EIPWRG4 — 比較、設計指引及合規資訊。

選型指南

Choose the MAX3232EIPWRG4 when a new design needs a compact dual-channel RS-232 interface, a 3 V to 5.5 V host supply, operation up to 250 kbps, and ±15 kV IEC ESD protection on connector-facing pins. Select the MAX3232 when the lower original-family protection level is acceptable and the design specifically calls for the earlier device. Consider the TRS3232E when its documented channel and auxiliary functions satisfy the interface requirements and its protection specification matches the application. The MAX3232CUE+T is a related option but should be selected only when reduced ESD protection is acceptable. For every replacement, verify the exact package footprint, pin functions, capacitor requirements, temperature range, and connector mapping before approving the substitution.

與替代品比較

參數 本產品 MAX3232 TRS3232E MAX3232CUE+T
Package 16-pin TSSOP (PW) 16-pin TSSOP (PW) 16-pin TSSOP (PW) 16-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Device Type Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver Dual RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V

主要差異化特點

  • Higher connector-side ESD protection (對比MAX3232)
  • Directly recommended upgrade path (對比MAX3232)
  • Lower-voltage host-side operation (對比MAX3232CUE+T)

設計說明

Place the charge-pump capacitors and small bypass capacitors directly beside their associated MAX3232EIPWRG4 pins, with short and symmetrical connections. Keep the charge-pump current loops compact and route them away from receiver inputs and connector-side nets. Follow the capacitor values and grounding arrangement in the Texas Instruments MAX3232E data sheet because incorrect values or long return paths can impair startup and output levels.

Position the transceiver near the RS-232 connector so exposed driver and receiver pins are not routed across the PCB. Maintain a direct signal-ground return between the connector and device ground, while separating that path from switching-current and noisy motor-return routes. The manufacturer specifies ±15 kV IEC ESD protection on serial-port pins, but good layout, controlled cable entry, and an appropriate chassis-ground design remain necessary for reliable operation.

Do not assume that the 3 V minimum supply means the connector receives 3.3 V RS-232. The internal charge pumps generate the bipolar voltage levels required by RS-232. Also verify that the PCB uses the correct PW footprint, that the selected capacitors meet the data-sheet requirements, and that the UART polarity and connector assignment match the attached equipment before installing a replacement.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The MAX3232E documentation identifies the family as qualified for automotive applications and provides ±15 kV IEC ESD protection. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for this exact ordering code is not stated in the cited manufacturer pages.

相關搜尋

MAX3232EIPWRG4 datasheet MAX3232EIPWRG4 pinout MAX3232EIPWRG4 datasheet pdf MAX3232EIPWRG4 equivalent MAX3232EIPWRG4 replacement MAX3232EIPWRG4 cross reference MAX3232EIPWRG4 vs MAX3232 MAX3232EIPWRG4 TSSOP-16 footprint MAX3232EIPWRG4 application circuit Texas Instruments MAX3232EIPWRG4 MAX3232EIPWRG4 price MAX3232EIPWRG4 stock

相關元件與詞彙

Texas Instruments MAX3232EIPWRG4 MAX3232E MAX3232 TRS3232E MAX3232CUE+T RS-232 RS-232 transceiver line driver line receiver dual charge-pump UART TIA/EIA-232-F ITU V.28 IEC ESD protection TSSOP-16 PW package surface-mount technology interface IC semiconductor 250 kbps 3 V to 5.5 V industrial controller data acquisition
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情