MC33174DG - 3-44V Quad Low-Power Op Amp | onsemi
N.º da peça: MC33174DG ✓ AtivoMC33174DG Visão geral
An operational amplifier is an analog signal-conditioning semiconductor that amplifies the difference between two input voltages while providing high input impedance, low output impedance, and predictable closed-loop behavior. The MC33174 belongs to the operational-amplifier hierarchy within amplifier ICs and signal-conditioning electronics. It is particularly suited to single-supply operation, allowing a common-mode input range to approach the lower supply rail for many practical signal-chain applications.
Key features include four amplifier channels, 1.8 MHz gain-bandwidth product, 2.1 V/µs slew rate, and operation from 3 V to 44 V. The bipolar process avoids the need for JFET input transistors, while the four-channel integration reduces the number of packages required for instrumentation and industrial control circuits. The 14-SOIC format also supports conventional surface-mount assembly and PCB layout practices.
The MC33174 family is designed for instrumentation, buffer-amplifier, and general-purpose signal-conditioning applications. Its 1.8 MHz bandwidth supports moderate-frequency amplification, while the 2.1 V/µs slew rate allows relatively fast transitions through larger voltage swings. Because the device is primarily intended for single-supply systems, input and output biasing should be selected carefully when signals approach the ground rail.
Typical uses include current-loop and voltage-loop signal conditioning, sensor amplification, active filtering, transducer interfaces, sample-and-hold stages, and industrial control modules. In a four-channel instrumentation design, the MC33174 can amplify four related sensor or feedback signals while sharing one supply and ground arrangement. Its industrial supply range also supports systems operating from 24 V rails, provided signal amplitudes remain within the amplifier's common-mode limits.
A practical design consideration is to verify common-mode range, output swing, stability, and noise performance at the intended supply voltage. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer's recommended stable-input circuit rather than left floating.
This page combines the MC33174's confirmed operating characteristics, pin-compatible family alternatives, parameter comparisons, and practical implementation guidance to support component selection, PCB reuse, and robust analog-circuit design.
Alternativas drop-in para MC33174DG — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC33174DG (mesmo formato e footprint) — diferindo em Amplifier Type, Gain-Bandwidth Product, Input Transistor Technology, Number of Amplifiers, Package.
MC33174DT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC33174VDG
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC33172DG
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MC33171DG
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MC33172DT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MC33174DG Classificações máximas e características elétricas
| Number of Amplifiers | 4 circuits |
| Amplifier Type | General-purpose operational amplifier |
| Single-Supply Operating Voltage | 3 V to 44 V |
| Split-Supply Operating Voltage | +/-1.5 V to +/-22 V |
| Gain-Bandwidth Product | 1.8 MHz |
| Slew Rate | 2.1 V/µs |
| Input Bias Current | 20 nA |
| Fabrication Technology | Bipolar |
| Input Transistor Technology | Bipolar, without JFET technology |
| Encapsulamento | 14-SOIC |
| Contagem de pinos | 14 pins |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do MC33174DG 14-soic
Configuração de pinos para MC33174DG (pacote 14-soic). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para MC33174DG.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC33174DG é adequado para 6 aplicaçãos: Industrial Sensor Signal Conditioning, Process Control Voltage Loops, Active Filtering and Equalization, Precision Measurement Buffering, Audio and Communication Interface Conditioning, Portable and Low-Power Embedded Systems.
Industrial Sensor Signal Conditioning
The MC33174DG is suitable for conditioning four low-frequency sensor signals in industrial control equipment because it integrates four general-purpose amplifiers in a single 14-SOIC package. Its 3 V to 44 V operating range supports 24 V industrial systems, while 1.8 MHz gain-bandwidth product and 2.1 V/µs slew rate accommodate moderate-bandwidth measurement signals. Each channel can amplify a transducer output, buffer a source impedance, or form part of an active filter. Biasing and common-mode limits must be checked for sensors whose outputs approach the lower supply rail.
Recomendado
Process Control Voltage Loops
The MC33174DG can support several voltage-error amplifiers, actuator drivers, or feedback stages within an industrial process-control board. Four channels allow engineers to consolidate repeated conditioning paths while retaining a modest 1.8 MHz bandwidth suitable for many control and instrumentation signals. The 2.1 V/µs slew rate helps preserve edge shape when driving moderate capacitance through the output stage. Because the device is optimized for single-supply operation, the feedback network should establish a suitable output bias and avoid commands that exceed the output-swing limits.
Recomendado
Active Filtering and Equalization
The MC33174DG can implement four related first- or low-order active filters when the signal bandwidth remains below the amplifier's 1.8 MHz gain-bandwidth product. Its 2.1 V/µs slew rate provides useful transient headroom for moderate-amplitude filter waveforms, and the four-channel package reduces the footprint required for multichannel equalizers. Component tolerances and amplifier noise should be considered when setting gain and cutoff frequency. Decoupling capacitors should be located close to the supply pins to prevent channel interaction.
Recomendado
Precision Measurement Buffering
The MC33174DG can buffer four high-impedance measurement sources before they feed a downstream converter or controller. The amplifier's bipolar input stage and 20 nA input-bias-current figure make the device relevant to source-level considerations in instrumentation. Its 1.8 MHz bandwidth is suitable for many temperature, pressure, and position signals that do not require high-frequency performance. Designers should still verify offset voltage, noise, common-mode range, and output settling at the actual gain and signal frequency.
Recomendado
Audio and Communication Interface Conditioning
The MC33174DG can provide gain and buffering for four low-level audio or communication-interface signals where the operating bandwidth is well below 1.8 MHz. Its 2.1 V/µs slew rate reduces distortion risk for moderate-amplitude waveforms, while the four-channel integration simplifies channel-parallel routing. A single-supply implementation requires an appropriate mid-supply bias for signals centered near ground. The amplifier is general purpose rather than an audio-specific device, so noise, distortion, output swing, and stability should be verified for the selected feedback network.
Recomendado
Portable and Low-Power Embedded Systems
The MC33174DG can consolidate four analog functions in compact embedded equipment when the board operates from a supply within the device's 3 V to 44 V capability. Four channels reduce package count compared with separate single or dual amplifiers, making the part relevant to low-power control and monitoring systems. The principal trade-off is that the 44 V maximum supply does not inherently imply low quiescent consumption; current and thermal requirements depend on the configuration. Check operating current, output duty cycle, and PCB thermal performance before using it in battery-limited equipment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC33174DG — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC33174DT | MC33174VDG | MC33172DG | MC33171DG |
|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi |
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Number of Amplifiers | 4 circuits | 4 circuits | 4 circuits | 2 circuits | 1 circuit |
| Input Technology | Bipolar, without JFET technology | Bipolar, without JFET technology | Bipolar, without JFET technology | Bipolar | Bipolar |
| Primary Application | General-purpose instrumentation and signal conditioning | General-purpose instrumentation and signal conditioning | General-purpose instrumentation and signal conditioning | General-purpose dual signal conditioning | General-purpose single signal conditioning |
Principais diferenciais
- Four independent amplifiers in one package (vs MC33172DG)
- Broad single-supply operating range (vs MC33174DT)
- Moderate-frequency signal-conditioning capability (vs MC33171DG)
Notas de projeto
Place the supply bypass capacitor close to the device's positive supply pins and provide a short return path to the ground pins. Although the MC33174 family supports a 3 V to 44 V single-supply range, the usable signal range still depends on the selected supply voltage. Confirm common-mode input range, output swing, and stable operating conditions in the MC33174 family datasheet before finalizing the feedback network.
Keep analog input and output routing compact and away from switching nodes and high-current return paths. The four amplifier channels share a package, so symmetrical decoupling and grounded copper around the device can reduce channel-to-channel interaction. If an unused channel is present, configure it according to the manufacturer's recommended stable-input arrangement rather than allowing its input to float.
Single-supply operation commonly requires a bias voltage at the noninverting input so that bipolar input and output signals remain within their useful range. Do not assume that a zero-volt input is centered correctly at mid-supply. Check the amplifier's common-mode behavior, output swing, offset, and stability for the actual gain, load, and supply configuration.
The maximum supply rating is not the recommended operating point. Select the rail for the circuit rather than using 44 V by default, because higher supply voltage can increase internal dissipation under sustained output loading. For thermal analysis, calculate worst-case amplifier dissipation from the actual supply voltage, output voltage, load current, and duty cycle, then verify the resulting temperature rise using the package thermal data and available PCB copper.
Informações de conformidade
The MC33174DG is an industrial-temperature general-purpose operational amplifier. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product page or current material-compliance records.