onsemi

MC33174DG - 3-44V Quad Low-Power Op Amp | onsemi

MPN: MC33174DG ✓ Aktif
3 V to 44 V Vdss 20 nA Id 14-SOIC Package
MOQ: 1 |

MC33174DG Ringkasan

The onsemi MC33174DG is a four-channel, low-power operational amplifier built with bipolar fabrication technology, with a 3 V to 44 V single-supply operating range, 1.8 MHz gain-bandwidth product, and 2.1 V/µs slew rate in a 14-pin SOIC package. The device provides four amplifiers in one package, reducing board area and simplifying four-signal conditioning, buffering, or filtering designs.

An operational amplifier is an analog signal-conditioning semiconductor that amplifies the difference between two input voltages while providing high input impedance, low output impedance, and predictable closed-loop behavior. The MC33174 belongs to the operational-amplifier hierarchy within amplifier ICs and signal-conditioning electronics. It is particularly suited to single-supply operation, allowing a common-mode input range to approach the lower supply rail for many practical signal-chain applications.

Key features include four amplifier channels, 1.8 MHz gain-bandwidth product, 2.1 V/µs slew rate, and operation from 3 V to 44 V. The bipolar process avoids the need for JFET input transistors, while the four-channel integration reduces the number of packages required for instrumentation and industrial control circuits. The 14-SOIC format also supports conventional surface-mount assembly and PCB layout practices.

The MC33174 family is designed for instrumentation, buffer-amplifier, and general-purpose signal-conditioning applications. Its 1.8 MHz bandwidth supports moderate-frequency amplification, while the 2.1 V/µs slew rate allows relatively fast transitions through larger voltage swings. Because the device is primarily intended for single-supply systems, input and output biasing should be selected carefully when signals approach the ground rail.

Typical uses include current-loop and voltage-loop signal conditioning, sensor amplification, active filtering, transducer interfaces, sample-and-hold stages, and industrial control modules. In a four-channel instrumentation design, the MC33174 can amplify four related sensor or feedback signals while sharing one supply and ground arrangement. Its industrial supply range also supports systems operating from 24 V rails, provided signal amplitudes remain within the amplifier's common-mode limits.

A practical design consideration is to verify common-mode range, output swing, stability, and noise performance at the intended supply voltage. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer's recommended stable-input circuit rather than left floating.

This page combines the MC33174's confirmed operating characteristics, pin-compatible family alternatives, parameter comparisons, and practical implementation guidance to support component selection, PCB reuse, and robust analog-circuit design.

Alternatif penggantian untuk MC33174DG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian MC33174DG (sama faktor bentuk dan footprint) — berbeda di dalam Amplifier Type, Gain-Bandwidth Product, Input Transistor Technology, Number of Amplifiers, Package.

STMicroelectronics
Amplifier Type: Quad general-purpose bipolar operational amplifier
Gain-Bandwidth Product: 2.1 MHz
Input Transistor Technology: Bipolar
Bandingkan dengan MC33174DG →

MC33174DT

✅ Drop-In
📦 14-SOIC
Same MC33174 four-channel architecture and 14-SOIC footprint; ordering suffix differs by 0%, with qualification and packaging details requiring confirmation.

📋 Alternatif referensi (tidak dalam katalog)

MC33174VDG

✅ Drop-In
📦 14-SOIC
Same MC33174 family, 1.8 MHz bandwidth class, and 14-SOIC package; suffix-specific temperature or qualification terms may differ by 0% in core parameters.

📋 Alternatif referensi (tidak dalam katalog)

MC33172DG

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-SOIC
Same bipolar MC3317x family and 14-SOIC arrangement; dual-channel versus quad-channel architecture represents the principal functional difference.

📋 Alternatif referensi (tidak dalam katalog)

MC33171DG

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-SOIC
Same bipolar MC3317x family and 14-SOIC arrangement; single-channel versus quad-channel architecture represents the principal functional difference.

📋 Alternatif referensi (tidak dalam katalog)

MC33172DT

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-SOIC
Same MC3317x family and 14-SOIC footprint; dual-channel topology and suffix-specific ordering terms are the main differences from the quad-channel target.

📋 Alternatif referensi (tidak dalam katalog)

MC33174DG Rating Maksimal & Karakteristik Listrik

Number of Amplifiers 4 circuits
Amplifier Type General-purpose operational amplifier
Single-Supply Operating Voltage 3 V to 44 V
Split-Supply Operating Voltage +/-1.5 V to +/-22 V
Gain-Bandwidth Product 1.8 MHz
Slew Rate 2.1 V/µs
Input Bias Current 20 nA
Fabrication Technology Bipolar
Input Transistor Technology Bipolar, without JFET technology
Paket 14-SOIC
Jumlah Pin 14 pins
Tipe Mounting Surface mount

MC33174DG 14-soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk MC33174DG (14-soic pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 14-soic untuk MC33174DG

Tidak ada data diatribut pin yang tersedia untuk MC33174DG.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

MC33174DG cocok untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Process Control Voltage Loops, Active Filtering and Equalization, Precision Measurement Buffering, Audio and Communication Interface Conditioning, Portable and Low-Power Embedded Systems.

🏭

Industrial Sensor Signal Conditioning

The MC33174DG is suitable for conditioning four low-frequency sensor signals in industrial control equipment because it integrates four general-purpose amplifiers in a single 14-SOIC package. Its 3 V to 44 V operating range supports 24 V industrial systems, while 1.8 MHz gain-bandwidth product and 2.1 V/µs slew rate accommodate moderate-bandwidth measurement signals. Each channel can amplify a transducer output, buffer a source impedance, or form part of an active filter. Biasing and common-mode limits must be checked for sensors whose outputs approach the lower supply rail.

⚡

Process Control Voltage Loops

The MC33174DG can support several voltage-error amplifiers, actuator drivers, or feedback stages within an industrial process-control board. Four channels allow engineers to consolidate repeated conditioning paths while retaining a modest 1.8 MHz bandwidth suitable for many control and instrumentation signals. The 2.1 V/µs slew rate helps preserve edge shape when driving moderate capacitance through the output stage. Because the device is optimized for single-supply operation, the feedback network should establish a suitable output bias and avoid commands that exceed the output-swing limits.

🔧

Active Filtering and Equalization

The MC33174DG can implement four related first- or low-order active filters when the signal bandwidth remains below the amplifier's 1.8 MHz gain-bandwidth product. Its 2.1 V/µs slew rate provides useful transient headroom for moderate-amplitude filter waveforms, and the four-channel package reduces the footprint required for multichannel equalizers. Component tolerances and amplifier noise should be considered when setting gain and cutoff frequency. Decoupling capacitors should be located close to the supply pins to prevent channel interaction.

🖥️

Precision Measurement Buffering

The MC33174DG can buffer four high-impedance measurement sources before they feed a downstream converter or controller. The amplifier's bipolar input stage and 20 nA input-bias-current figure make the device relevant to source-level considerations in instrumentation. Its 1.8 MHz bandwidth is suitable for many temperature, pressure, and position signals that do not require high-frequency performance. Designers should still verify offset voltage, noise, common-mode range, and output settling at the actual gain and signal frequency.

🌐

Audio and Communication Interface Conditioning

The MC33174DG can provide gain and buffering for four low-level audio or communication-interface signals where the operating bandwidth is well below 1.8 MHz. Its 2.1 V/µs slew rate reduces distortion risk for moderate-amplitude waveforms, while the four-channel integration simplifies channel-parallel routing. A single-supply implementation requires an appropriate mid-supply bias for signals centered near ground. The amplifier is general purpose rather than an audio-specific device, so noise, distortion, output swing, and stability should be verified for the selected feedback network.

📱

Portable and Low-Power Embedded Systems

The MC33174DG can consolidate four analog functions in compact embedded equipment when the board operates from a supply within the device's 3 V to 44 V capability. Four channels reduce package count compared with separate single or dual amplifiers, making the part relevant to low-power control and monitoring systems. The principal trade-off is that the 44 V maximum supply does not inherently imply low quiescent consumption; current and thermal requirements depend on the configuration. Check operating current, output duty cycle, and PCB thermal performance before using it in battery-limited equipment.

What are the key specifications of MC33174DG that engineers should know?
The MC33174DG is a four-channel general-purpose operational amplifier with a 3 V to 44 V single-supply range, 1.8 MHz gain-bandwidth product, 2.1 V/µs slew rate, and 14-SOIC package. According to the onsemi MC33174 product page, it uses quality bipolar fabrication without JFET device technology. The four integrated channels make it useful for instrumentation, buffering, filtering, and industrial control designs.
What is the operating voltage of MC33174DG?
The MC33174DG operates from 3 V to 44 V on a single supply, with a stated split-supply range of +/-1.5 V to +/-22 V. These voltage limits are listed for the MC33174 family on the onsemi product page. The wide 24 V industrial range supports 24 V control systems, although signal amplitudes must remain within the applicable input and output limits.
Where can I download the MC33174DG datasheet PDF?
The MC33174DG datasheet should be obtained through the onsemi MC33174 product page or an exact-MPN datasheet record. The manufacturer product page is the authoritative source for the MC33174 family, while indexed copies provide convenient PDF access. Use the MC33174 family document for electrical characteristics, recommended circuits, and the complete 14-pin SOIC pinout.
Where can I find the MC33174DG pinout?
The MC33174DG pinout is found in the pin-configuration section of the onsemi MC33174 family datasheet. It is a 14-SOIC device containing four operational amplifiers. Use the manufacturer pin-description table when assigning input, output, supply, and no-connect pins, and preserve the package's standard counter-clockwise numbering during PCB layout.
What is MC33174DG used for?
The MC33174DG is used for four-channel analog signal conditioning, including sensor amplification, voltage buffering, active filtering, and control-loop interfaces. Its 1.8 MHz gain-bandwidth product and 2.1 V/µs slew rate suit moderate-bandwidth instrumentation. Four amplifiers in one 14-SOIC package also reduce component count where several low-to-moderate-frequency signals must be conditioned.
Can MC33174DG operate from a 24 V supply?
Yes, the MC33174DG supports single supplies up to 44 V, so a regulated 24 V rail is within its stated operating range. The onsemi MC33174 page identifies the family for industrial operation. Signal conditioning around 24 V still requires attention to common-mode range, output swing, resistor ratings, and protection against transients.
What are the advantages of a four-channel op-amp package?
A four-channel operational-amplifier package reduces the number of components and PCB connections needed for multichannel analog circuits. The MC33174DG provides four general-purpose amplifiers in one 14-SOIC package while retaining 1.8 MHz bandwidth and 2.1 V/µs slew rate. This is especially useful in instrumentation, industrial control, buffering, and active-filter boards with several parallel channels.
Is MC33174DG suitable for industrial temperature applications?
The MC33174DG is marketed for industrial-temperature use, as reflected in the onsemi and distributor product descriptions. The exact minimum and maximum junction or ambient temperature ratings should be confirmed in the MC33174 family datasheet before specifying the device for a temperature-controlled environment. Thermal design should also account for the package and PCB copper available at the intended operating current.
What is the difference between MC33174DG and MC33174DT?
The MC33174DG and MC33174DT belong to the same onsemi MC33174 family and are listed in a 14-SOIC package comparison. The primary selection point is the orderable suffix and its associated packaging or lifecycle terms rather than a change to the basic four-channel, 1.8 MHz amplifier architecture. Confirm temperature grade, shipping format, and current availability before using one as a production substitute.
MC33174DG vs MC33174VDG - which is better for industrial control?
MC33174DG and MC33174VDG are both presented as 14-SOIC members of the MC33174 family with a 1.8 MHz gain-bandwidth product, so their functional performance is closely related. The distinguishing suffix may encode ordering, qualification, or lifecycle information not exposed in the comparison snippet. Choose the variant whose temperature grade and production status match the industrial control program.
When should I choose MC33174DG over MC33174N?
Choose MC33174DG when the PCB requires the 14-SOIC surface-mount footprint and the design benefits from four amplifiers in one package. MC33174N is useful when comparing onsemi's alternate orderable member of the MC33174 family, but its package and ordering conditions must be checked before substitution. Package geometry and pin compatibility are mandatory for a true drop-in decision.
What can replace MC33174DG?
The clearest pin-compatible replacement family members are onsemi's 14-SOIC MC33174 variants, including MC33174DT and MC33174VDG. Cross-brand substitutes should be selected only after confirming pinout, supply range, input bias current, output swing, bandwidth, slew rate, and noise. Use the Request a Quote form on this page when sourcing an exact replacement for production.
What is the best onsemi equivalent for MC33174DG?
The best onsemi-family alternatives are the 14-SOIC MC33174DT and MC33174VDG because they retain the quad general-purpose amplifier architecture and 1.8 MHz bandwidth class. MC33172DG and MC33171DG are additional same-family options when their channel count and electrical characteristics satisfy the design. Pinout and full parameter review remain necessary before any substitution.
Where can I buy MC33174DG online?
MC33174DG can be sourced through the Request a Quote form on this page, where the exact suffix and required quantity can be specified. The form supports current sourcing, stock confirmation, lead-time review, and shipment planning without relying on a static listing. The onsemi MC33174 family page remains the technical reference for device identity and ordering options.
Is MC33174DG in stock and what is its lead time?
MC33174DG inventory and lead time depend on current supplier commitments and the requested quantity. Submit the exact MPN and required quantity through the Request a Quote form on this page to obtain a current availability response. For technical confirmation, the onsemi MC33174 product page identifies the family and its supported device variants.

Data referensi engineering untuk MC33174DG — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the MC33174DG when the design needs four general-purpose bipolar operational amplifiers in a 14-SOIC package and operates across the device's 3 V to 44 V supply range. Its 1.8 MHz bandwidth and 2.1 V/µs slew rate make it suitable for instrumentation, buffering, active filtering, and industrial control signals rather than high-speed or low-noise precision applications. MC33174DT and MC33174VDG are the closest same-family choices when their suffix-specific qualification, lifecycle, and ordering conditions better match the program. MC33172DG is appropriate when two channels are sufficient and board area matters more than integrating four amplifiers. MC33171DG is useful only when a single-channel solution is required. For any substitution, confirm the complete pinout, common-mode range, output swing, input bias current, offset voltage, noise, stability, and temperature rating rather than relying on package and bandwidth alone.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini MC33174DT MC33174VDG MC33172DG MC33171DG
Brand onsemi onsemi onsemi onsemi onsemi
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Number of Amplifiers 4 circuits 4 circuits 4 circuits 2 circuits 1 circuit
Input Technology Bipolar, without JFET technology Bipolar, without JFET technology Bipolar, without JFET technology Bipolar Bipolar
Primary Application General-purpose instrumentation and signal conditioning General-purpose instrumentation and signal conditioning General-purpose instrumentation and signal conditioning General-purpose dual signal conditioning General-purpose single signal conditioning

Diferensiator Kunci

  • Four independent amplifiers in one package (vsMC33172DG)
  • Broad single-supply operating range (vsMC33174DT)
  • Moderate-frequency signal-conditioning capability (vsMC33171DG)

Catatan Desain

Place the supply bypass capacitor close to the device's positive supply pins and provide a short return path to the ground pins. Although the MC33174 family supports a 3 V to 44 V single-supply range, the usable signal range still depends on the selected supply voltage. Confirm common-mode input range, output swing, and stable operating conditions in the MC33174 family datasheet before finalizing the feedback network.

Keep analog input and output routing compact and away from switching nodes and high-current return paths. The four amplifier channels share a package, so symmetrical decoupling and grounded copper around the device can reduce channel-to-channel interaction. If an unused channel is present, configure it according to the manufacturer's recommended stable-input arrangement rather than allowing its input to float.

Single-supply operation commonly requires a bias voltage at the noninverting input so that bipolar input and output signals remain within their useful range. Do not assume that a zero-volt input is centered correctly at mid-supply. Check the amplifier's common-mode behavior, output swing, offset, and stability for the actual gain, load, and supply configuration.

The maximum supply rating is not the recommended operating point. Select the rail for the circuit rather than using 44 V by default, because higher supply voltage can increase internal dissipation under sustained output loading. For thermal analysis, calculate worst-case amplifier dissipation from the actual supply voltage, output voltage, load current, and duty cycle, then verify the resulting temperature rise using the package thermal data and available PCB copper.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The MC33174DG is an industrial-temperature general-purpose operational amplifier. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product page or current material-compliance records.

Pencarian Terkait

mc33174dg datasheet MC33174DG datasheet pdf MC33174DG pinout MC33174DG equivalent MC33174DG replacement MC33174DG cross reference MC33174DG price MC33174DG stock onsemi MC33174DG MC33174DG 14-SOIC footprint MC33174DG 3V 44V op amp MC33174DG 1.8MHz amplifier MC33174DG industrial signal conditioning MC33174DG vs MC33174DT MC33174DG application circuit

Komponen dan Istilah Terkait

onsemi MC33174DG MC33174DT MC33174VDG MC33172DG MC33171DG MC33172DT operational amplifier quad operational amplifier general-purpose amplifier bipolar fabrication JFET amplifier IC signal conditioning single-supply operation instrumentation amplifier 14-SOIC SOIC family surface mount gain-bandwidth product slew rate common-mode input range input bias current active filter industrial control
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ