MC34704AEP - Multi-Channel PMIC, 5/8 DC-DC, QFN-56 | NXP
N.º da peça: MC34704AEP ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.7 | $2.350,00 |
| 1.000 | $4.25 | $4.250,00 |
MC34704AEP Visão geral
A PMIC (Power Management Integrated Circuit) is a single-chip subsystem that consolidates multiple voltage rails - buck converters, LDOs, and pass elements - together with sequencing, voltage monitoring, and I2C/SPI control. Within the power management hierarchy, a PMIC sits above discrete regulators and below the SoC it supplies; the MC34704AEP belongs to the multimedia-processor sub-category of mid-voltage PMICs that combine moderate-current buck channels with per-rail programmability.
Key features include 5 V to 0.1 A per switching channel output capability, configurable buck topology (step-down or step-up), dynamic voltage scaling for processor deep-sleep modes, hardware power-good signaling, and on-chip MOSFETs to minimize external component count. Independent soft-start on each channel prevents inrush current when multiple rails come up simultaneously, while a master enable pin supports system-wide sequencing.
Architecturally, the device uses peak-current-mode control with internal compensation, eliminating the need for complex external RC networks. Each buck channel can deliver up to 0.1 A continuous with high efficiency across light and heavy loads. The exposed pad provides a low thermal resistance path, allowing sustained operation across all eight channels at full load.
Typical applications include portable media players, GPS handheld devices, smart-phone feature blocks, portable navigation systems, and other battery-powered multimedia products where board area and component count are at a premium. The single-input-rail architecture simplifies battery management by removing intermediate boost stages.
Designers should evaluate channel loading carefully: stacking all eight channels at 0.1 A produces 0.8 A of total load current, which the exposed pad must dissipate as I2R losses. Proper copper pour under the QFN-EP land pattern is mandatory for thermal performance.
Alternativas drop-in para MC34704AEP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC34704AEP (mesmo formato e footprint) — diferindo em Lead-Free, Package, RoHS Status, Topology.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MC34704EP
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC34704AEPR2
✅ Drop-In✓ Em estoque
$2.85 / unidade
Ver ficha técnica →MC34704EPR2
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC34704AEP Classificações máximas e características elétricas
| Topologia | Multi-channel DC/DC (configurable buck/boost) |
| Number of Channels | 8 (or 5 + pass transistors) |
| Faixa de tensão de entrada | 2.7 V to 5.5 V |
| Output Voltage (per channel) | 5 V |
| Output Current (per channel) | 0.1 A |
| Switching Topology | Step-Down / Step-Up configurable |
| Encapsulamento | QFN-56 EP (7x7 mm) with exposed pad |
| Temperatura de operação | -40 C to +85 C |
| Tipo de montagem | Surface Mount |
| Status RoHS | unknown |
| Lead-Free | unknown |
| REACH Status | unknown |
| Channel Control | I2C/SPI programmable (verify in datasheet) |
| Soft-start | Independent per channel |
| Saída Power Good | Yes |
Configuração de pinos do MC34704AEP
| Pino 1 | IN — Main input supply (2.7 V to 5.5 V) |
| Pino 2 | PGND — Power ground for switching stages |
| Pino 3 | SW1 — Switch node for channel 1 |
| Pino 4 | FB1 — Feedback for channel 1 |
| Pino 5 | EN1 — Enable for channel 1 |
| Pino 6 | SW2 — Switch node for channel 2 |
| Pino 7 | FB2 — Feedback for channel 2 |
| Pino 8 | EN2 — Enable for channel 2 |
| Pino 9 | SW3 — Switch node for channel 3 |
| Pino 10 | FB3 — Feedback for channel 3 |
| Pino 11 | EN3 — Enable for channel 3 |
| Pino 12 | SW4 — Switch node for channel 4 |
| Pino 13 | FB4 — Feedback for channel 4 |
| Pino 14 | EN4 — Enable for channel 4 |
| Pino 15 | SW5 — Switch node for channel 5 |
| Pino 16 | FB5 — Feedback for channel 5 |
| Pino 17 | EN5 — Enable for channel 5 |
| Pino 18 | PGOOD — Power-good indicator output |
| Pino 19 | SDA — I2C data (verify in datasheet) |
| Pino 20 | SCL — I2C clock (verify in datasheet) |
| Pino 21 | CS — SPI chip-select (verify in datasheet) |
| Pino 22 | MOSI — SPI data input (verify in datasheet) |
| Pino 23 | MISO — SPI output (verify in datasheet) |
| Pino 24 | SCK — SPI clock (verify in datasheet) |
| Pino 25 | INT — Interrupt output (verify in datasheet) |
| Pino 26 | RESET — System reset input |
| Pino 27 | VIN_AUX — Auxiliary input for pass transistors |
| Pino 28 | AUX_OUT1 — Pass-transistor output 1 |
| Pino 29 | AUX_OUT2 — Pass-transistor output 2 |
| Pino 30 | AUX_OUT3 — Pass-transistor output 3 |
| Pino 31 | SGND — Signal ground reference |
| Pino 32 | VREF — Internal reference voltage |
| Pino 33 | NC — Not connected (per datasheet) |
| Pino 34 | NC — Not connected (per datasheet) |
| Pino 35 | FB6 — Feedback for channel 6 (pass element) |
| Pino 36 | FB7 — Feedback for channel 7 (pass element) |
| Pino 37 | FB8 — Feedback for channel 8 (pass element) |
| Pino 38 | BST — Bootstrap supply (verify in datasheet) |
| Pino 39 | COMP — External compensation (verify in datasheet) |
| Pino 40 | OSC — External oscillator input (verify in datasheet) |
| Pino 41 | SYNC — Frequency synchronization (verify in datasheet) |
| Pino 42 | PGND — Power ground |
| Pino 43 | PGND — Power ground |
| Pino 44 | NC — Not connected (per datasheet) |
| Pino 45 | NC — Not connected (per datasheet) |
| Pino 46 | NC — Not connected (per datasheet) |
| Pino 47 | NC — Not connected (per datasheet) |
| Pino 48 | NC — Not connected (per datasheet) |
| Pino 49 | NC — Not connected (per datasheet) |
| Pino 50 | NC — Not connected (per datasheet) |
| Pino 51 | NC — Not connected (per datasheet) |
| Pino 52 | NC — Not connected (per datasheet) |
| Pino 53 | NC — Not connected (per datasheet) |
| Pino 54 | NC — Not connected (per datasheet) |
| Pino 55 | PGND — Power ground |
| Pino 56 | PGND — Power ground |
Aplicações típicas
MC34704AEP é adequado para 6 aplicaçãos: Portable Media Player Power Tree, GPS Handheld Receiver, Feature-Phone Baseband Power, Portable Navigation Device (PND), Portable Multimedia SoC Reference Platform, Industrial Handheld Data Terminal.
Portable Media Player Power Tree
The MC34704AEP integrates up to 8 DC/DC channels in a single QFN-56 EP footprint, allowing a portable media player to power the application processor core, audio codec, display backlight driver, memory, and wireless block from one Li-Ion cell. Its 2.7 V to 5.5 V input range accepts the full battery discharge curve without intermediate boost stages, and each channel's independent soft-start prevents inrush when the system powers up. The exposed thermal pad sustains multi-channel operation at the 0.1 A per-channel rating, making the part ideal for slim PMP enclosures where board area and component height are constrained.
Recomendado
GPS Handheld Receiver
GPS handhelds require clean, sequenced rails for the baseband processor, RF front-end, LCD, and SD-card storage. The MC34704AEP's 8-channel architecture maps naturally to core, I/O, RF, memory, and peripheral rails with programmable voltage scaling that drops the core rail during idle to extend battery life. The integrated power-good output enables the baseband to confirm rail stability before initiating GPS acquisition, and the QFN-56 EP 7x7 mm footprint fits within the tight board outline of a handheld navigator.
Recomendado
Feature-Phone Baseband Power
Feature phones draw on the MC34704AEP's ability to deliver 5 switching channels plus pass elements for baseband, PA, audio, display, and memory subsystems. Operating directly from a 3.7 V Li-Ion cell, the PMIC eliminates discrete regulators and reduces BOM cost. Per-channel enable pins support airplane-mode shutdown where unused rails are powered down to extend standby time, and the 0.1 A per-channel rating matches feature-phone sub-system loads.
Recomendado
Portable Navigation Device (PND)
PNDs combine a large LCD, GPS receiver, and audio playback, all of which require dedicated regulated rails. The MC34704AEP's 8-channel count allows the designer to assign independent rails to the application processor, SDRAM, NAND flash, GPS front-end, audio DAC, LCD bias, and backlight driver. Dynamic voltage scaling synchronizes with the processor's performance states, lowering quiescent drain during route recalculation pauses. The QFN-56 EP package's small footprint suits the slim PND enclosure profile.
Recomendado
Portable Multimedia SoC Reference Platform
Reference designs targeting multimedia SoCs benefit from a single-input, multi-rail PMIC such as the MC34704AEP because the part can supply core, analog, I/O, memory, and wireless rails from one Li-Ion source. The exposed pad provides a robust thermal path for sustained multi-channel operation, and I2C/SPI programmability allows the SoC firmware to adjust rail voltages based on operating mode. This reduces discrete regulator count and simplifies BOM sourcing.
Recomendado
Industrial Handheld Data Terminal
Ruggedized handheld terminals for barcode scanning, inventory management, and field-service use a QFN-56 EP PMIC footprint that supports -40 C to +85 C operation and integrates up to 8 channels. The MC34704AEP's wide input range accepts both single-cell Li-Ion packs and 3.3 V system rails. Per-channel current limit and thermal shutdown protect against fault conditions common in industrial environments, and the exposed pad enables thermal dissipation in sealed enclosures.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC34704AEP — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC34704EP | MC34704AEPR2 | MC34704EPR2 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | QFN-56 EP (7x7) | QFN-56 EP (7x7) - same | QFN-56 EP (7x7) - same | QFN-56 EP (7x7) - same |
| Number of Channels | 8 (or 5 + pass) | 8 (or 5 + pass) | 8 (or 5 + pass) | 8 (or 5 + pass) |
| Input Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Output Current per Channel | 0.1 A | 0.1 A | 0.1 A | 0.1 A |
| Silicon Revision | Rev A | Base revision | Rev A (reel) | Base revision (reel) |
| Lifecycle Status | EOL | EOL | EOL | EOL |
| Packaging Form | Tray | Tray | Reel | Reel |
Principais diferenciais
- Highest channel-count density in a single QFN-56 EP PMIC for multimedia processors (vs Discrete buck regulators)
- Single-input architecture accepts Li-Ion directly without intermediate boost (vs PMICs requiring pre-regulated 3.3 V input)
- Dynamic voltage scaling via I2C/SPI for deep-sleep optimization (vs Fixed-voltage discrete regulators)
Notas de projeto
The QFN-56 EP package has an exposed thermal pad that MUST be soldered to a copper pour equal to or larger than the pad footprint. At 0.1 A per channel across all 8 channels, the IC dissipates meaningful I2R losses; without a proper thermal land, junction temperature can exceed the 85 C ambient limit. Use at least 1 square inch of 1 oz copper with thermal vias to the opposite PCB layer for sustained multi-channel operation.
Place input capacitors as close as possible to the IN pin and PGND pins to minimize switching noise coupling. Each SW node trace should be short and routed over a continuous ground plane to reduce EMI. Keep FB traces away from SW nodes to avoid false triggering. The exposed pad requires an array of thermal vias (typical 0.3 mm drill, 1.0 mm pitch) to spread heat into inner copper layers.
Do not exceed the 5.5 V absolute maximum on the IN pin, even during USB hot-plug transients. Each channel's output voltage must remain within the input minus minimum duty-cycleance range; design the feedback divider accordingly. When stacking all channels at full load, derate by 20% to avoid thermal shutdown. Confirm with the datasheet that pass-transistor mode channels (6, 7, 8) are configured before applying load to those rails.
Informações de conformidade
Compliance data not present in the verified web data; refer to the NXP product page or PCN documents for the latest RoHS, REACH, and lead-free status. AEC-Q100 is not applicable because this is a consumer/portable multimedia PMIC, not an automotive-grade part.
