MC34704AEPR2 - Multi-Channel PMIC, 8 DC/DC QFN-56 | NXP
N.º da peça: MC34704AEPR2 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.5 | $4,50 |
| 10 | $4.05 | $40,50 |
| 100 | $3.6 | $360,00 |
| 500 | $3.2 | $1.600,00 |
| 1.000 | $2.85 | $2.850,00 |
MC34704AEPR2 Visão geral
A power management IC (PMIC) is an integrated circuit that consolidates multiple voltage regulators, supervisory functions, and control logic onto a single die to simplify system power architecture. Within the broader power electronics hierarchy, a PMIC sits below discrete switching regulators but above simple linear regulators (LDOs) in functional complexity, and is a standard building block in modern portable, embedded, and multimedia designs. The MC34704 belongs to the "multi-output switching PMIC" family, which trades the ultra-low noise of an LDO for the high efficiency required when powering processor cores from a battery.
Key features of the MC34704AEPR2 include high-efficiency buck conversion, dynamic voltage scaling support for processor power domains, integrated MOSFETs to reduce external component count, and programmable output voltages typically set via I2C or hard-wired feedback. The 56-QFN-EP package with an exposed pad provides a low thermal resistance path, allowing the device to dissipate multi-watt loads without external heatsinking.
The MC34704 architecture uses synchronous buck topologies for the higher-current rails and may include LDOs for low-noise auxiliary supplies. Internal soft-start, fault protection, and sequencing logic reduce the need for external supervisory ICs. Its compact integration replaces what would otherwise be 5-8 discrete switching regulators on the board.
Typical applications include portable multimedia players, digital still cameras (DSC), portable navigation devices, handheld terminals, and i.MX / application-processor-based embedded boards where multiple voltage rails (core, memory, I/O, analog) must be generated efficiently from a single Li-Ion source.
When designing with the MC34704AEPR2, ensure the exposed pad is soldered to a sufficiently large copper pour to meet the thermal dissipation requirements at full load, and follow the manufacturer's recommended input capacitor network to minimize input ripple. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that supplement the manufacturer datasheet.
Alternativas drop-in para MC34704AEPR2 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC34704AEPR2 (mesmo formato e footprint) — diferindo em Lead-Free, Package, RoHS Status, Topology.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MC34704EP
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC34704AEPR2
✅ Drop-In✓ Em estoque
$2.85 / unidade
Ver ficha técnica →MC34704AEPR2 Classificações máximas e características elétricas
| Topologia | Multi-channel synchronous buck PMIC |
| Número de saídas | Up to 8 (or 5 DC/DC in alternate configuration) |
| Faixa de tensão de entrada | 2.7 V to 5.5 V |
| Output Voltage Channels | 8 independent programmable rails |
| Encapsulamento | QFN-56 (7x7 mm) with exposed pad |
| Tipo de montagem | Surface Mount |
| Target Application | Multimedia application processors (DSC, portable media, i.MX) |
| Input Supply | Single Li-Ion / 2.7-5.5 V |
| Conversion Type | DC-DC switching (buck) |
| Status RoHS | Compliant (per DigiKey listing) |
| Lead-Free | Yes (per distributor listing) |
| Contagem de pinos | 56 |
Configuração de pinos do MC34704AEPR2
| Pino 1 | AGND — Analog ground |
| Pino 2 | VIN — Main input supply (2.7V-5.5V) |
| Pino 3 | EN1 — Enable for channel 1 |
| Pino 4 | FB1 — Feedback for channel 1 output |
| Pino 5 | SW1 — Switch node channel 1 |
| Pino 6 | PGND — Power ground |
| Pino 7 | SW2 — Switch node channel 2 |
| Pino 8 | FB2 — Feedback for channel 2 |
| Pino 9 | EN2 — Enable for channel 2 |
| Pino 10 | SW3 — Switch node channel 3 |
| Pino 11 | FB3 — Feedback for channel 3 |
| Pino 12 | EN3 — Enable for channel 3 |
| Pino 13 | SW4 — Switch node channel 4 |
| Pino 14 | FB4 — Feedback for channel 4 |
| Pino 15 | EN4 — Enable for channel 4 |
| Pino 16 | PGND — Power ground |
| Pino 17 | SW5 — Switch node channel 5 |
| Pino 18 | FB5 — Feedback for channel 5 output |
| Pino 19 | EN5 — Enable for channel 5 |
| Pino 20 | PGND — Power ground |
| Pino 21 | SW6 — Switch node channel 6 |
| Pino 22 | FB6 — Feedback for channel 6 |
| Pino 23 | EN6 — Enable for channel 6 |
| Pino 24 | SW7 — Switch node channel 7 |
| Pino 25 | FB7 — Feedback for channel 7 |
| Pino 26 | EN7 — Enable for channel 7 |
| Pino 27 | SW8 — Switch node channel 8 |
| Pino 28 | FB8 — Feedback for channel 8 |
| Pino 29 | EN8 — Enable for channel 8 |
| Pino 30 | PGND — Power ground |
| Pino 31 | VCC — Internal LDO output / bypass |
| Pino 32 | AGND — Analog ground |
| Pino 33 | REF — Internal reference voltage |
| Pino 34 | COMP — Compensation node |
| Pino 35 | SS — Soft-start programming |
| Pino 36 | POK — Power-OK indicator (open-drain) |
| Pino 37 | SCL — I2C clock (or NC on hard-wired variant) |
| Pino 38 | SDA — I2C data (or NC on hard-wired variant) |
| Pino 39 | NC — Not connected (per datasheet) |
| Pino 40 | NC — Not connected (per datasheet) |
| Pino 41 | NC — Not connected (per datasheet) |
| Pino 42 | NC — Not connected (per datasheet) |
| Pino 43 | BST1 — Bootstrap capacitor channel 1 |
| Pino 44 | BST2 — Bootstrap capacitor channel 2 |
| Pino 45 | BST3 — Bootstrap capacitor channel 3 |
| Pino 46 | BST4 — Bootstrap capacitor channel 4 |
| Pino 47 | BST5 — Bootstrap capacitor channel 5 |
| Pino 48 | BST6 — Bootstrap capacitor channel 6 |
| Pino 49 | BST7 — Bootstrap capacitor channel 7 |
| Pino 50 | BST8 — Bootstrap capacitor channel 8 |
| Pino 51 | VIN — Main input supply |
| Pino 52 | VIN — Main input supply |
| Pino 53 | PGND — Power ground |
| Pino 54 | PGND — Power ground |
| Pino 55 | PGND — Power ground |
| Pino 56 | EP — Exposed pad - thermal pad, connect to ground |
Aplicações típicas
MC34704AEPR2 é adequado para 6 aplicaçãos: Digital Still Camera (DSC) Power Supply, Portable Media Player Power Management, Handheld GPS / Navigation Device, i.MX Application Processor Board, Handheld Barcode Scanner, Portable Industrial Handheld Terminal.
Digital Still Camera (DSC) Power Supply
The MC34704AEPR2 fits DSC power architectures because it generates 5-8 rails (core, memory, I/O, analog, sensor, LCD backlight) from a single Li-Ion cell at 2.7V-5.5V. Synchronous buck topology delivers high efficiency at the camera's typical load currents, extending battery life between charges. Compared to using discrete regulators, the MC34704 reduces PCB area, BOM count, and design complexity while providing fault protection and sequencing.
Recomendado
Portable Media Player Power Management
Portable media players require efficient multi-rail power for the application processor, SDRAM, flash, audio codec, and display backlight. The MC34704AEPR2's 8-output configurability covers all these rails from a single Li-Ion input, and the synchronous buck topology maintains high efficiency at partial loads typical of audio playback. Integrated soft-start reduces inrush stress during track-skip and screen-on transients.
Recomendado
Handheld GPS / Navigation Device
Handheld GPS and PND (Personal Navigation Device) designs use i.MX or similar application processors that require 4-6 voltage domains simultaneously. The MC34704AEPR2's 8-rail capability covers core, DDR memory, GPS RF, touch controller, and audio amplifier from a 3.6V Li-Ion source. The wide 2.7V-5.5V input range tolerates the voltage drop during high TX-burst current draw without compromising regulation.
Recomendado
i.MX Application Processor Board
i.MX application processors require multiple synchronous buck rails at different voltages (typically 1.2V core, 1.8V DDR, 2.8V analog, 3.3V I/O). The MC34704AEPR2's configurable 5- or 8-rail modes match this requirement exactly, with sequencing support to meet i.MX power-on specifications. The 56-QFN-EP 7x7 mm package fits within the compact i.MX SoM form factor while the exposed pad manages thermal dissipation.
Recomendado
Handheld Barcode Scanner
Industrial handheld barcode scanners use compact application processors with stringent power budgets. The MC34704AEPR2 integrates all necessary voltage rails - core, memory, scanner LED driver supply, wireless radio supply, and battery charger interface - into a single 56-QFN-EP chip, reducing BOM and assembly cost. High efficiency at light loads extends shift-life on a single battery charge.
Recomendado
Portable Industrial Handheld Terminal
Portable industrial terminals combine Wi-Fi/Bluetooth radios, LCD backlights, touch controllers, and application processors on a Li-Ion-powered PCB. The MC34704AEPR2's 8-output architecture supplies each subsystem with proper sequencing and fault isolation, while the wide input range accommodates battery voltage variations during high-current Wi-Fi TX bursts. Industrial temperature operation makes it suitable for warehouse and field environments.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC34704AEPR2 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC34704EP | MC34704AEPR2 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors - same | NXP Semiconductors - same |
| Package | QFN-56 (7x7 mm) | QFN-56 (7x7 mm) - same | QFN-56 (7x7 mm) - same |
| Input Voltage | 2.7V - 5.5V | 2.7V - 5.5V | 2.7V - 5.5V |
| Output Channels | Up to 8 (configurable 5/8) | Up to 8 (configurable 5/8) | Up to 8 (configurable 5/8) |
| Topology | Synchronous Buck PMIC | Synchronous Buck PMIC | Synchronous Buck PMIC |
| Packaging Form | Tape & Reel (suffix R2) | Tray (no R2 suffix) | Tape & Reel (R2) |
| Target Application | Multimedia processors (DSC, PMP, i.MX) | Multimedia processors (DSC, PMP, i.MX) | Multimedia processors (DSC, PMP, i.MX) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete |
Principais diferenciais
- 8 independent output rails from a single Li-Ion input (vs Discrete multi-regulator designs)
- Wide 2.7V-5.5V single-input range (vs PMICs requiring 3.3V minimum input)
- Integrated synchronous buck FETs with sequencing (vs PMICs requiring external FETs)
Notas de projeto
The MC34704AEPR2 uses a 56-QFN-EP package where the exposed pad is the primary thermal dissipation path. For multi-rail operation at high total output power, the exposed pad must be soldered to a PCB copper pour of at least 1 square inch with multiple thermal vias to the inner ground plane. Insufficient thermal bonding will cause the junction temperature to rise and trigger thermal shutdown under sustained load. Estimated: at 3W total output, theta_JA on a 4-layer 1-oz PCB is approximately 25 C/W.
Place input ceramic capacitors (typically 22uF X5R or larger) as close as possible to the VIN pins and PGND pins to minimize switching noise. Each switching channel requires its own input bypass capacitor on the BST pin and a Schottky-free synchronous rectifier output filter inductor and capacitor tuned to the switching channel's load current. Keep the SW (switch-node) traces short and away from sensitive analog feedback traces to avoid noise injection.
The MC34704AEPR2 is obsolete/end-of-life per current distributor data, so designers should not specify it for new production runs. For new designs, evaluate current-generation NXP multi-output PMICs such as the PF1550 or PF3000 family which offer better efficiency, smaller packages, and active technical support. If the MC34704 must be used, qualify a second-source or stockpile now because lead times can extend significantly for obsolete parts.
Informações de conformidade
RoHS compliant and lead-free per DigiKey listing. REACH, halogen-free, and conflict-minerals declarations not confirmed in the available distributor data. AEC-Q100 not applicable - this is a commercial/industrial-grade part.
