MC9S08MM128CLH - 48MHz 128KB 8-Bit MCU | NXP
N.º da peça: MC9S08MM128CLH ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MC9S08MM128CLH Visão geral
A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and interfaces into one device. Within the embedded-control hierarchy, this MCU belongs to the HCS08 family, the S08 processor series, and the S08MM product line. Its integrated connectivity and measurement features allow one device to control peripherals, communicate with a host, and acquire precision analog signals without relying on several separate discrete components.
The verified product information identifies an 8-bit data bus, 128K by 8 Flash organization, a maximum CPU frequency of 48 MHz, and 2.5 V or 3.3 V operation. The MC9S08MM128 series provides USB Specification 2.0 support with control, bulk, interrupt, and isochronous transfers. Its on-chip transceiver and 3.3 V regulator can reduce external component count, while integrated precision analog resources suit instrumentation and other measurement-oriented products.
The device uses the HCS08 instruction set and is organized around an S08 core. Depending on supply voltage, the verified datasheet search results state that the CPU can operate at 48 MHz above the upper threshold, 40 MHz above 2.1 V, and 20 MHz above 1.8 V. Voltage-dependent clock selection must therefore be checked against the actual rail during firmware planning and validation.
Typical uses include medical equipment, industrial instrumentation, USB-connected control products, graphic human-interface systems, and compact embedded-control products. The combination of USB, Flash memory, and analog measurement support can simplify product architecture where both communications and precision acquisition are required. Software migration is also important because the S08 core, memory map, peripherals, and development ecosystem must be supported by the selected tools.
When laying out a board, preserve the manufacturer's recommended decoupling, USB transceiver connections, analog grounding, and exposed-pad or thermal-land requirements specified for the 64-LQFP package. Confirm clock, memory, I/O, and USB timing against the exact datasheet revision because package variants and temperature suffixes can differ.
This page consolidates the verified manufacturer and distributor facts, available procurement links, package information, and design-focused context for engineers evaluating this end-of-life MCU. It does not infer undocumented memory sizes, peripheral counts, prices, or lifecycle replacements.
Alternativas drop-in para MC9S08MM128CLH — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasMC9S08MM128CLH Classificações máximas e características elétricas
| Microcontroller Type | 8-bit HCS08 microcontroller |
| Processor Core | S08 core |
| Processor Series | S08MM |
| Largura do barramento de dados | 8 bit |
| Frequência máxima de clock | 48 MHz |
| CPU Frequency Above 2.1 V | Up to 40 MHz |
| CPU Frequency Above 1.8 V | Up to 20 MHz |
| Flash Memory | 128 KB (128K x 8) |
| Tensão de alimentação | 2.5 V or 3.3 V |
| USB Compliance | USB Specification 2.0 |
| USB Transfer Types | Control, bulk, interrupt, and isochronous |
| Integrated USB Transceiver | Yes |
| Integrated 3.3 V Regulator | Yes |
| Graphic Display Support | Yes |
| Precision Analog Measurement | Supported by the MC9S08MM128 series |
| Encapsulamento | 64-LQFP, 10 mm x 10 mm |
| Tipo de montagem | Surface mount |
| Instruction Set | HCS08 |
Guia de Configuração de Pinos do MC9S08MM128CLH 64-lqfp, 10 mm x 10 mm
Configuração de pinos para MC9S08MM128CLH (pacote 64-lqfp, 10 mm x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MC9S08MM128CLH.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC9S08MM128CLH é adequado para 6 aplicaçãos: USB-Connected Embedded Control, Medical Measurement Instruments, Industrial Instrumentation, Graphic Human-Interface Panels, Precision Data-Acquisition Modules, USB Test and Measurement Products.
USB-Connected Embedded Control
The MC9S08MM128CLH fits compact USB control products because its S08MM family provides USB Specification 2.0 support, an on-chip transceiver, a 3.3 V regulator, and four listed transfer classes. A designer can use it as the application processor for configuration, control, and peripheral supervision without requiring a separate USB transceiver in the basic architecture. Its 8-bit core and 48 MHz maximum clock are suitable for real-time control, while 128 KB Flash provides storage for firmware and USB descriptors. Design validation must still check current-consumption limits, clock requirements, bus timing, and USB enumeration behavior in the official datasheet.
Recomendado
Medical Measurement Instruments
The MC9S08MM128CLH is applicable to medical and laboratory instruments that combine digital control with precision analog measurement. NXP identifies medical applications and measurement-focused use cases for the 9S08MM128/64/32 family. The S08MM integration can place measurement, control, display handling, and USB connectivity in one 64-LQFP device, reducing board area compared with a more fragmented implementation. Its 48 MHz maximum clock supports responsive control tasks, and 128 KB Flash accommodates application code, calibration data, and communication routines. Safety, accuracy, and regulatory claims must be established separately for the finished instrument.
Recomendado
Industrial Instrumentation
The MC9S08MM128CLH suits industrial instrumentation where an 8-bit controller must acquire precision analog signals while also handling local display or host communication. The verified NXP material emphasizes precision measurement resources, while the MCU supplies up to 48 MHz processing and 128 KB Flash in a compact 10 mm by 10 mm LQFP. Engineers can place it near sensors, actuator controls, and operator interfaces, then use USB for configuration or data export. Analog grounding, reference stability, calibration strategy, and noise control remain critical; the exact converter and timer specifications should be confirmed in the manufacturer datasheet before precision claims are finalized.
Recomendado
Graphic Human-Interface Panels
The MC9S08MM128CLH can support compact products that combine a graphical interface with embedded measurement or device control. Graphic-display support is explicitly identified in the verified family description, while the 48 MHz S08 core and 128 KB Flash provide resources for interface state, rendering, communications, and control logic. A practical architecture could use the MCU to process sensor data, update a local display, and expose diagnostics through USB. Display-interface timing, memory requirements, and panel-specific electrical details are not supplied here, so designers must verify them in the exact datasheet and selected display-driver documentation.
Recomendado
Precision Data-Acquisition Modules
The MC9S08MM128CLH is well matched to compact data-acquisition modules because the S08MM family combines precision measurement capability with an 8-bit control core and USB connectivity. At up to 48 MHz, the device can coordinate sampling control, digital filtering, calibration logic, and data transfer while fitting a 64-LQFP footprint. Its 128 KB Flash can hold firmware and lookup or calibration tables, although RAM and converter details must be verified before sizing a specific channel count. Precision designs should evaluate reference stability, analog supply requirements, grounding, shielding, sampling topology, and calibration drift rather than relying only on CPU frequency.
Recomendado
USB Test and Measurement Products
The MC9S08MM128CLH can serve as the control core in a small USB test or measurement product because it combines USB Specification 2.0 connectivity, graphic-display potential, precision measurement resources, and 128 KB Flash. Control, bulk, interrupt, and isochronous transfer support enables host communication for configuration, logging, or data exchange. The integrated transceiver and regulator may simplify the USB subsystem, but the board still requires verified routing, protection, grounding, and firmware implementation. Since the target is end of life, new instruments should assess whether long-term availability justifies a platform redesign from an established production MCU.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9S08MM128CLH — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC9S08MM128CLK |
|---|---|---|
| Package | 64-LQFP (10x10) | 80-LQFP (12x12) |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Core | S08 | S08 |
| Data Bus Width | 8 bit | 8 bit |
| Maximum Clock Frequency | 48 MHz | 48 MHz |
| Flash Memory | 128 KB | 128 KB |
Principais diferenciais
- Verified 64-LQFP package differs from the same-family 80-LQFP variant (vs MC9S08MM128CLK)
- Confirmed USB Specification 2.0 integration for connected embedded products (vs MC9S08MM128CLK)
- Explicit lifecycle status for sourcing decisions (vs MC9S08MM128CLK)
Notas de projeto
Use the exact 64-LQFP 10 mm by 10 mm land pattern and pin numbering from the official MC9S08MM128 datasheet; the verified search result confirms the package but does not provide all 64 pin assignments. Place required decoupling close to the relevant supply pins and preserve the manufacturer's recommended return paths. Fine-pitch LQFP leads require adequate solder mask and paste control. Do not substitute a generic 80-LQFP footprint for MC9S08MM128CLK or another related part because the verified package comparison shows a different lead count and body size.
Validate the clock ceiling against the actual supply voltage. According to the verified datasheet search result, the family reaches 48 MHz only above the upper threshold, 40 MHz above 2.1 V, and 20 MHz above 1.8 V. Firmware must not select an unsupported clock mode after a rail transition. Include brownout, startup, decoupling, and regulator tolerance in worst-case timing tests. Estimated: CPU frequency alone does not determine power, so obtain actual current and dissipation figures from the exact datasheet rather than inventing them.
Follow the manufacturer's USB routing and grounding guidance when using the integrated transceiver. Keep the USB path controlled, maintain the required reference-plane continuity, minimize stubs and unnecessary vias, and place protection components where their capacitance will not distort signal integrity. Because the provided evidence confirms USB Specification 2.0 functionality but not trace geometry, impedance values, or connector details, treat those values as DATA_NEEDED and extract them from the official datasheet before layout release.
Do not treat another S08 MCU with the same Flash size as a drop-in replacement merely because the core and memory headline values match. A substitution must be checked for package dimensions, pinout, USB implementation, analog peripherals, memory map, clock tree, voltage range, startup behavior, interrupts, and development-tool support. The supplied cross-reference results do not verify any safe direct replacement for MC9S08MM128CLH, and NXP marks the target end of life.
Informações de conformidade
The verified NXP page includes an Environmental Quality section, but the retrieved content does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim is inferred.