NXP Semiconductors

MC9S08PB16VTG - 8-Bit 20MHz 16KB Flash MCU | NXP | Motor Control

N.º da peça: MC9S08PB16VTG ✓ Ativo
2.7 V to 5.5 V Vdss 16-pin TSSOP Package 20 MHz Speed 16 KB Memory
MOQ: 1 |

MC9S08PB16VTG Visão geral

The NXP Semiconductors MC9S08PB16VTG is an 8-bit S08 microcontroller with a 20 MHz bus, 16 KB of Flash program memory, 1 KB of RAM, and rich analog integration in a 16-pin TSSOP package. It operates across a 2.7 V to 5.5 V supply range and targets cost-sensitive motor-control, industrial, appliance, and user-interface systems.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one die. The S08 architecture belongs to the broader embedded-controller hierarchy, combining an 8-bit processor core with analog measurement, communication, timing, and control functions. MC9S08PB16 devices reduce external component count by placing functions such as a 12-bit ADC, analog comparator, amplifier, I2C interface, and timers on the same device.

The MC9S08PB16VTG supports bus operation up to 20 MHz over 2.7 V to 5.5 V, with 16 KB of Flash and 1 KB of RAM. Up to 30 interrupt and reset sources and four-level nested interrupt support help organize real-time control tasks. The 5 V-capable architecture also allows operation in industrial and appliance environments where a 3.3 V-only interface would be insufficient.

The S08PB family combines an economical 8-bit CPU with rich analog resources. A 12-bit ADC supports sensor and process measurements, while the integrated comparator and amplifier support threshold detection and low-level analog conditioning. I2C provides a two-wire peripheral bus, and flexible timer resources support PWM, capture, periodic events, and motor-control timing. These integrated blocks can reduce board area and the need for separate analog or timing ICs.

Typical uses include small brushless or simple motor controllers, appliance user interfaces, temperature and pressure sensing, industrial controls, and compact sensor modules. The part is especially suitable when designers need legacy 5 V compatibility, low-cost Flash programmability, and analog integration without adopting a larger 32-bit MCU. The 16-pin TSSOP package also supports compact through-hole PCB assembly.

Designers should preserve adequate decoupling between the supply pins and analog source, keep analog and high-current switching traces physically separated, and validate timer settings against the required PWM frequency. The operating voltage, clock configuration, reset behavior, and peripheral pin multiplexing should be confirmed from the MC9S08PB16 datasheet before layout release and firmware deployment.

Alternativas drop-in para MC9S08PB16VTG — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MC9S08PB16VTG (mesmo formato e footprint) — diferindo em Package, Flash Memory, Nested Interrupt Levels, Serial Interface, Timer Resources.

NXP Semiconductors
Flash Memory: 8 KB
Serial Interface: 1 I2C interface
Timer Resources: Flexible timer subsystem
Comparar com MC9S08PB16VTG →
NXP Semiconductors
Package: 16-TSSOP
Flash Memory: 16KB (16K x 8)
Nested Interrupt Levels: 4
Comparar com MC9S08PB16VTG →

MC9S08PT16VTG

✅ Drop-In
NXP Semiconductors
📦 16-pin TSSOP
S08 (HCS08) 8-bit CISC CPU · 8-Bit · 20 MHz · 2.7 V to 5.5 V · 16KB (16K x 8) · On-chip · 16-TSSOP · Surface Mount

Consulte o preço

Ver ficha técnica →

MC9S08PB16VTG Classificações máximas e características elétricas

CPU Architecture 8-bit S08 central processor unit
Maximum Bus Frequency 20 MHz
Flash Program Memory 16 KB
RAM 1 KB
Operating Voltage Range 2.7 V to 5.5 V
ADC Resolution 12 bit
Analog Comparator Integrated
Operational Amplifier Integrated
Serial Interface I2C
Timer Resources Flexible timers with PWM and capture functions
Interrupt and Reset Sources Up to 30 sources
Nested Interrupt Levels Up to 4 levels
Encapsulamento 16-pin TSSOP
Package Width 4.40 mm
Tipo de montagem Surface mount
Program Memory Type Flash
Low-Voltage Detection Integrated
Power-On Reset Integrated
Watchdog Timer Integrated
Pulse-Width Modulation Integrated

Guia de Configuração de Pinos do MC9S08PB16VTG 4.40 mm

Configuração de pinos para MC9S08PB16VTG (pacote 4.40 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 4.40 mm para MC9S08PB16VTG

Nenhum dado detalhado de pinagem disponível para MC9S08PB16VTG.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MC9S08PB16VTG é adequado para 6 aplicaçãos: Small Motor Control, Industrial Sensor Node, Appliance User Interface, Temperature and Pressure Monitoring, I2C Sensor Hub, 5 V Embedded Control Module.

⚡

Small Motor Control

MC9S08PB16VTG fits cost-sensitive small motor controllers because it combines a 20 MHz S08 CPU, flexible timers, PWM, a 12-bit ADC, and a 5 V-compatible supply range in a 16-pin TSSOP. The ADC can sample position, current, or temperature inputs, while timer-generated PWM can command a driver stage. Using an 8-bit MCU reduces instruction-cycle and memory overhead compared with a larger 32-bit control MCU. The design should still include appropriate gate-driver circuitry, current protection, and a power stage sized for the motor.

🏭

Industrial Sensor Node

The MC9S08PB16VTG is useful for compact industrial sensor nodes that need local signal conditioning and control without a high-cost MCU. Its 12-bit ADC measures analog inputs, the integrated comparator provides threshold detection, and the amplifier can support low-level signal conditioning. At up to 20 MHz, the S08 CPU can combine measurement, filtering, status handling, and communications logic. The 2.7 V to 5.5 V range also supports both lower-voltage industrial subsystems and legacy 5 V sensors, subject to each peripheral's electrical limits.

🔧

Appliance User Interface

MC9S08PB16VTG suits appliance and user-interface modules that combine a small display or indicator set with analog sensing. Its 16 KB Flash provides room for application code, 1 KB of RAM supports compact state management, and the integrated timers can handle periodic UI updates or button scanning. The 5 V operating capability is valuable in appliance electronics that already use a 5 V rail, while I2C can connect compatible peripherals. Pin multiplexing and timing should be checked against the selected display and keypad architecture.

💊

Temperature and Pressure Monitoring

MC9S08PB16VTG can act as the local controller in a temperature or pressure monitoring product. The 12-bit ADC digitizes the analog sensor output, the comparator can provide fast limit detection, and the 20 MHz S08 CPU can perform scaling, calibration, filtering, and alarm logic. I2C supports compatible digital sensors or configuration devices, while the integrated watchdog and reset functions help maintain reliable embedded operation. For accurate measurements, the analog input path, reference strategy, grounding, and PCB thermal gradients must follow the device's recommended application circuit.

🧩

I2C Sensor Hub

MC9S08PB16VTG works well as a compact I2C sensor hub in compact industrial or appliance equipment. It can poll compatible sensors, validate responses, translate measurements into local control actions, and maintain an interrupt-driven update schedule using its nested interrupt capability. The 16-pin TSSOP keeps the controller footprint small, and Flash allows firmware to be updated when product functionality changes. Designers should confirm I2C timing, address conflicts, pull-up voltage, bus capacitance, and peripheral mapping before finalizing the PCB.

⚡

5 V Embedded Control Module

MC9S08PB16VTG is appropriate for compact 5 V embedded-control modules that need an economical CPU, nonvolatile program memory, and analog inputs without the overhead of a 32-bit processor. Its 16 KB Flash supports dedicated control code, 1 KB of RAM accommodates small working sets, and the up-to-20-MHz S08 bus provides deterministic instruction throughput. Compatibility with existing 5 V sensors and interface circuits simplifies integration, although brownout, clock-startup, and peripheral reset behavior must be evaluated for the final power architecture.

Where can I download the MC9S08PB16VTG datasheet PDF?
The MC9S08PB16VTG datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC9S08PB16.pdf. The manufacturer document covers both MC9S08PB16 and MC9S08PB8 devices and includes the S08 CPU, memory, analog peripherals, interrupt architecture, electrical characteristics, and package information. Use the MC9S08PB16-specific sections when designing the 16 KB Flash variant.
What are the key specifications of MC9S08PB16VTG that engineers should know?
The MC9S08PB16VTG is an 8-bit S08 microcontroller rated up to 20 MHz with 16 KB of Flash memory, 1 KB of RAM, and operation from 2.7 V to 5.5 V. According to the NXP MC9S08PB16 datasheet, it also integrates a 12-bit ADC, analog comparator, amplifier, I2C, flexible timers, PWM, and support for up to 30 interrupt and reset sources.
What package does MC9S08PB16VTG use?
The MC9S08PB16VTG uses a 16-pin TSSOP package intended for surface-mount PCB assembly. The listed package width is 4.40 mm. Its 16-pin count and pin-compatible S08PB family arrangement make it suitable for compact industrial, appliance, sensor, and motor-control designs, although the exact land pattern and pin assignments must be taken from the NXP datasheet.
What is the MC9S08PB16VTG pinout and where is it located?
The complete MC9S08PB16VTG pin assignment is located in the pin-configuration and package-outline sections of the NXP MC9S08PB16 datasheet. The device is supplied in a 16-pin TSSOP package. Engineers should use the manufacturer pin table when assigning multiplexed digital, analog, timer, communication, reset, and power functions because several peripheral signals can be routed through alternate pins.
Can MC9S08PT16VTG replace MC9S08PB16VTG?
MC9S08PT16VTG is an NXP S08P-family device described by the manufacturer as pin-compatible with the S08 family, making it the closest supported drop-in candidate for MC9S08PB16VTG. NXP positions the S08P family for durable 5 V industrial and user-interface applications, but firmware, clock, memory, peripheral, and qualification differences still require verification against both datasheets before production substitution.
What can replace MC9S08PB16VTG?
MC9S08PT16VTG is the supported pin-compatible replacement candidate identified for MC9S08PB16VTG because both belong to NXP's 5 V S08 family and use the same 16-pin architecture. No verified cross-brand equivalent is established here. Before replacing the device, confirm pin functions, Flash and RAM requirements, peripheral differences, clock setup, interrupt behavior, and existing firmware compatibility.
MC9S08PB16VTG vs MC9S08PT16VTG: which is better for an industrial control?
MC9S08PT16VTG is generally the stronger candidate for a new industrial-control design because NXP describes the S08P family as durable, 5 V capable, and pin-compatible with existing S08 products. MC9S08PB16VTG remains appropriate for designs already qualified around the S08PB family. The decision should follow a complete review of memory, timer, analog, communications, qualification, and software requirements.
When should I choose MC9S08PB16VTG over MC9S08PT16VTG?
Choose MC9S08PB16VTG when an existing S08PB design, validated firmware, or qualified bill of materials depends specifically on the PB family. Choose MC9S08PT16VTG for a new design when its pin-compatible S08P implementation provides the preferred long-term industrial or user-interface platform. Both support a 5 V operating environment, so application voltage alone should not determine the selection.
Is MC9S08PB16VTG suitable for motor-control applications?
MC9S08PB16VTG is suitable for cost-sensitive motor-control designs that need an 8-bit CPU, up to 20 MHz operation, flexible timers, PWM, a 12-bit ADC, and 5 V compatibility. NXP identifies the S08PB family for motor-control and industrial applications. The number and speed of motor phases, required control-loop performance, protection features, and power-stage design must also be evaluated.
How much Flash and RAM does MC9S08PB16VTG have?
MC9S08PB16VTG provides 16 KB of Flash program memory and 1 KB of RAM. The NXP datasheet describes the part as an 8-bit MCU with a 20 MHz bus and identifies its program memory as 16K by 8 Flash. The Flash area supports in-circuit programming workflows, while the 1 KB RAM should be checked against stack depth, buffer requirements, and real-time application state.
What is the operating voltage of MC9S08PB16VTG?
MC9S08PB16VTG operates from 2.7 V to 5.5 V across its operating temperature range. The NXP MC9S08PB16 data sheet explicitly identifies this supply range for bus operation up to 20 MHz. Its 5 V compatibility is useful for industrial, appliance, and user-interface equipment, although individual analog and digital peripherals may have additional operating constraints.
Where can I buy MC9S08PB16VTG and check current lead time?
Use the Request a Quote form on this page to request MC9S08PB16VTG availability, current lead time, order quantity, and delivery options. The part is an NXP MC9S08PB16-series 8-bit microcontroller in a 16-pin TSSOP package. A formal purchase should use the exact MPN MC9S08PB16VTG so that temperature grade, package, and reel configuration are not confused with related variants.
What is the price of MC9S08PB16VTG?
Current commercial terms for MC9S08PB16VTG should be requested through the Request a Quote form on this page. The form captures quantity, target price, lead time, and shipment requirements for the exact 16-pin TSSOP MPN. Because quoted terms can change with volume, inventory, and order configuration, submit the intended production quantity rather than relying on a generic single-unit figure.
Is MC9S08PB16VTG in stock and what is its lead time?
MC9S08PB16VTG stock and current lead time should be confirmed through the Request a Quote form on this page. Enter the required quantity, target date, and acceptable shipment destination so the exact NXP manufacturer part number can be matched with current inventory and production scheduling. This avoids treating a distributor landing-page stock message as a guaranteed allocation for a production order.
What is the best cross-brand equivalent for MC9S08PB16VTG?
No verified cross-brand drop-in equivalent for MC9S08PB16VTG is established. NXP's MC9S08PT16VTG is the closest manufacturer-backed pin-compatible candidate because it is an S08P-family 5 V MCU. A competing 8-bit MCU may offer similar memory and analog functions, but a genuine replacement would still require a new PCB footprint, port mapping, toolchain, and firmware port unless an exact pin match is independently established.

Dados de referência de engenharia para MC9S08PB16VTG — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MC9S08PB16VTG when the design already uses the S08PB family, requires 16 KB of Flash and 1 KB of RAM, and benefits from a 12-bit ADC, comparator, amplifier, I2C, timers, and PWM in a 16-pin TSSOP. Its 2.7 V to 5.5 V range is especially useful for mixed industrial and appliance systems. MC9S08PT16VTG is the closest supported pin-compatible candidate when designing a new 5 V S08P platform, but memory, peripheral, interrupt, clock, and qualification details must be checked before replacing an existing MC9S08PB16VTG. No verified cross-brand drop-in equivalent is established, so a competing MCU should be treated as a redesign unless exact package and pin compatibility is independently proven. For any substitution, validate the PCB land pattern, peripheral multiplexing, firmware toolchain, electrical limits, and production qualification.

Comparação com alternativas

Parâmetro Este produto MC9S08PT16VTG
Brand NXP Semiconductors NXP Semiconductors
Package 16-pin TSSOP 16-pin TSSOP
CPU Architecture 8-bit S08 8-bit S08P family
Operating Voltage Range 2.7 V to 5.5 V 5 V family
Pin Compatibility MC9S08PB16VTG TSSOP-16 land pattern Manufacturer-described as pin-compatible with the S08 family

Principais diferenciais

  • Established S08PB configuration for compact embedded control (vs MC9S08PT16VTG)
  • Integrated rich-analog resources reduce external circuitry (vs MC9S08PT16VTG)
  • Broad 5 V-compatible operating range (vs MC9S08PT16VTG)

Notas de projeto

Place the device-side supply decoupling capacitor close to the MCU power pins and return it through a short ground path. Keep analog inputs away from PWM outputs, motor-switching nodes, and high-current return paths. Because the TSSOP-16 lead pitch limits routing density, assign analog and digital functions from the datasheet pin table before committing the board outline and component placement.

Confirm the clock source, bus timing, and reset behavior with the 2.7 V to 5.5 V operating range in mind. Validate maximum clock operation at the intended supply voltage and temperature. For analog measurement channels, follow the recommended source impedance and sampling requirements; long traces and insufficient settling time can degrade the effective resolution of the 12-bit ADC.

Do not treat the generic S08-family designation as proof that every PB and PT device has identical peripherals. Before substituting MC9S08PT16VTG, compare pin multiplexing, ADC channels, timer channels, I2C behavior, interrupt vectors, watchdog implementation, clock settings, and memory size. Validate the existing firmware or port it through the manufacturer-supported development environment.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes are not explicitly stated for this exact MPN in the manufacturer product information and datasheet excerpts. IEC 60730 is mentioned for the NXP MC9S08PT16VTG family positioning, but it is not treated as an AEC-Q100 or exact-part compliance claim.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MC9S08PB16VTG datasheet MC9S08PB16VTG pinout MC9S08PB16VTG datasheet pdf MC9S08PB16VTG specifications MC9S08PB16VTG equivalent MC9S08PB16VTG replacement MC9S08PB16VTG vs MC9S08PT16VTG MC9S08PB16VTG TSSOP-16 footprint MC9S08PB16VTG motor control NXP MC9S08PB16VTG MC9S08PB16VTG price MC9S08PB16VTG stock

Componentes & termos relacionados

NXP Semiconductors MC9S08PB16VTG MC9S08PT16VTG MC9S08PB16 S08 CPU S08P family 8-bit microcontroller embedded controller semiconductor Flash program memory static RAM 12-bit ADC analog comparator operational amplifier I2C PWM watchdog timer nested interrupts TSSOP-16 surface-mount package motor control industrial control appliance user interface sensor node 2.7 V to 5.5 V operation
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ