MC9S08PB16VTG - 8-Bit 20MHz 16KB Flash MCU | NXP | Motor Control
부품 번호: MC9S08PB16VTG ✓ 활성MC9S08PB16VTG 개요
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one die. The S08 architecture belongs to the broader embedded-controller hierarchy, combining an 8-bit processor core with analog measurement, communication, timing, and control functions. MC9S08PB16 devices reduce external component count by placing functions such as a 12-bit ADC, analog comparator, amplifier, I2C interface, and timers on the same device.
The MC9S08PB16VTG supports bus operation up to 20 MHz over 2.7 V to 5.5 V, with 16 KB of Flash and 1 KB of RAM. Up to 30 interrupt and reset sources and four-level nested interrupt support help organize real-time control tasks. The 5 V-capable architecture also allows operation in industrial and appliance environments where a 3.3 V-only interface would be insufficient.
The S08PB family combines an economical 8-bit CPU with rich analog resources. A 12-bit ADC supports sensor and process measurements, while the integrated comparator and amplifier support threshold detection and low-level analog conditioning. I2C provides a two-wire peripheral bus, and flexible timer resources support PWM, capture, periodic events, and motor-control timing. These integrated blocks can reduce board area and the need for separate analog or timing ICs.
Typical uses include small brushless or simple motor controllers, appliance user interfaces, temperature and pressure sensing, industrial controls, and compact sensor modules. The part is especially suitable when designers need legacy 5 V compatibility, low-cost Flash programmability, and analog integration without adopting a larger 32-bit MCU. The 16-pin TSSOP package also supports compact through-hole PCB assembly.
Designers should preserve adequate decoupling between the supply pins and analog source, keep analog and high-current switching traces physically separated, and validate timer settings against the required PWM frequency. The operating voltage, clock configuration, reset behavior, and peripheral pin multiplexing should be confirmed from the MC9S08PB16 datasheet before layout release and firmware deployment.
드롭인 대체품: MC9S08PB16VTG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S08PB16VTG (동일 폼 팩터 및 풋프린트) — 차이점: Package, Flash Memory, Nested Interrupt Levels, Serial Interface, Timer Resources.
MC9S08PT16VTG
✅ 드롭인가격 문의
데이터시트 보기 →MC9S08PB16VTG 최대 정격 & 전기적 특성
| CPU Architecture | 8-bit S08 central processor unit |
| Maximum Bus Frequency | 20 MHz |
| Flash Program Memory | 16 KB |
| RAM | 1 KB |
| Operating Voltage Range | 2.7 V to 5.5 V |
| ADC Resolution | 12 bit |
| Analog Comparator | Integrated |
| Operational Amplifier | Integrated |
| Serial Interface | I2C |
| Timer Resources | Flexible timers with PWM and capture functions |
| Interrupt and Reset Sources | Up to 30 sources |
| Nested Interrupt Levels | Up to 4 levels |
| 패키지 | 16-pin TSSOP |
| Package Width | 4.40 mm |
| 실장 유형 | Surface mount |
| Program Memory Type | Flash |
| Low-Voltage Detection | Integrated |
| Power-On Reset | Integrated |
| Watchdog Timer | Integrated |
| Pulse-Width Modulation | Integrated |
MC9S08PB16VTG 4.40 mm 핀 구성 가이드
MC9S08PB16VTG(4.40 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08PB16VTG.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08PB16VTG 적합 용도: 6 애플리케이션s: Small Motor Control, Industrial Sensor Node, Appliance User Interface, Temperature and Pressure Monitoring, I2C Sensor Hub, 5 V Embedded Control Module.
Small Motor Control
MC9S08PB16VTG fits cost-sensitive small motor controllers because it combines a 20 MHz S08 CPU, flexible timers, PWM, a 12-bit ADC, and a 5 V-compatible supply range in a 16-pin TSSOP. The ADC can sample position, current, or temperature inputs, while timer-generated PWM can command a driver stage. Using an 8-bit MCU reduces instruction-cycle and memory overhead compared with a larger 32-bit control MCU. The design should still include appropriate gate-driver circuitry, current protection, and a power stage sized for the motor.
추천
Industrial Sensor Node
The MC9S08PB16VTG is useful for compact industrial sensor nodes that need local signal conditioning and control without a high-cost MCU. Its 12-bit ADC measures analog inputs, the integrated comparator provides threshold detection, and the amplifier can support low-level signal conditioning. At up to 20 MHz, the S08 CPU can combine measurement, filtering, status handling, and communications logic. The 2.7 V to 5.5 V range also supports both lower-voltage industrial subsystems and legacy 5 V sensors, subject to each peripheral's electrical limits.
추천
Appliance User Interface
MC9S08PB16VTG suits appliance and user-interface modules that combine a small display or indicator set with analog sensing. Its 16 KB Flash provides room for application code, 1 KB of RAM supports compact state management, and the integrated timers can handle periodic UI updates or button scanning. The 5 V operating capability is valuable in appliance electronics that already use a 5 V rail, while I2C can connect compatible peripherals. Pin multiplexing and timing should be checked against the selected display and keypad architecture.
추천
Temperature and Pressure Monitoring
MC9S08PB16VTG can act as the local controller in a temperature or pressure monitoring product. The 12-bit ADC digitizes the analog sensor output, the comparator can provide fast limit detection, and the 20 MHz S08 CPU can perform scaling, calibration, filtering, and alarm logic. I2C supports compatible digital sensors or configuration devices, while the integrated watchdog and reset functions help maintain reliable embedded operation. For accurate measurements, the analog input path, reference strategy, grounding, and PCB thermal gradients must follow the device's recommended application circuit.
추천
I2C Sensor Hub
MC9S08PB16VTG works well as a compact I2C sensor hub in compact industrial or appliance equipment. It can poll compatible sensors, validate responses, translate measurements into local control actions, and maintain an interrupt-driven update schedule using its nested interrupt capability. The 16-pin TSSOP keeps the controller footprint small, and Flash allows firmware to be updated when product functionality changes. Designers should confirm I2C timing, address conflicts, pull-up voltage, bus capacitance, and peripheral mapping before finalizing the PCB.
추천
5 V Embedded Control Module
MC9S08PB16VTG is appropriate for compact 5 V embedded-control modules that need an economical CPU, nonvolatile program memory, and analog inputs without the overhead of a 32-bit processor. Its 16 KB Flash supports dedicated control code, 1 KB of RAM accommodates small working sets, and the up-to-20-MHz S08 bus provides deterministic instruction throughput. Compatibility with existing 5 V sensors and interface circuits simplifies integration, although brownout, clock-startup, and peripheral reset behavior must be evaluated for the final power architecture.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08PB16VTG — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08PT16VTG |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 16-pin TSSOP | 16-pin TSSOP |
| CPU Architecture | 8-bit S08 | 8-bit S08P family |
| Operating Voltage Range | 2.7 V to 5.5 V | 5 V family |
| Pin Compatibility | MC9S08PB16VTG TSSOP-16 land pattern | Manufacturer-described as pin-compatible with the S08 family |
주요 차별점
- Established S08PB configuration for compact embedded control (vs MC9S08PT16VTG)
- Integrated rich-analog resources reduce external circuitry (vs MC9S08PT16VTG)
- Broad 5 V-compatible operating range (vs MC9S08PT16VTG)
설계 노트
Place the device-side supply decoupling capacitor close to the MCU power pins and return it through a short ground path. Keep analog inputs away from PWM outputs, motor-switching nodes, and high-current return paths. Because the TSSOP-16 lead pitch limits routing density, assign analog and digital functions from the datasheet pin table before committing the board outline and component placement.
Confirm the clock source, bus timing, and reset behavior with the 2.7 V to 5.5 V operating range in mind. Validate maximum clock operation at the intended supply voltage and temperature. For analog measurement channels, follow the recommended source impedance and sampling requirements; long traces and insufficient settling time can degrade the effective resolution of the 12-bit ADC.
Do not treat the generic S08-family designation as proof that every PB and PT device has identical peripherals. Before substituting MC9S08PT16VTG, compare pin multiplexing, ADC channels, timer channels, I2C behavior, interrupt vectors, watchdog implementation, clock settings, and memory size. Validate the existing firmware or port it through the manufacturer-supported development environment.
규정 준수 정보
Compliance attributes are not explicitly stated for this exact MPN in the manufacturer product information and datasheet excerpts. IEC 60730 is mentioned for the NXP MC9S08PT16VTG family positioning, but it is not treated as an AEC-Q100 or exact-part compliance claim.