MC9S12GC32MPBE - 32KB 16-Bit 50MHz MCU | NXP
N.º da peça: MC9S12GC32MPBE ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $14.9905 | $14,99 |
| 10 | $14.9905 | $149,91 |
| 100 | $14.9905 | $1.499,05 |
| 500 | $14.9905 | $7.495,25 |
| 1.000 | $14.9905 | $14.990,50 |
MC9S12GC32MPBE Visão geral
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, timers, serial interfaces, analog and digital peripherals, and clocking resources on one integrated circuit. The HCS12 family belongs to the broader embedded-controller hierarchy: HCS12 core → 16-bit microcontroller → embedded processing IC → semiconductor. A phase-lock loop, or PLL, derives higher-frequency internal clock signals from a lower-frequency reference while supporting flexible speed and power configurations.
Verified source material identifies 32 KB Flash, a 16-bit HCS12 core, operation up to 50 MHz, and a 52-LQFP package. One distributor result also lists 2.5 V and 5 V operating support, while another conflicting source states 25 MHz maximum frequency. The 50 MHz figure is retained because it appears in the Mouser and NXP-associated search results; the conflicting lower frequency is not substituted into the main specification set. Detailed RAM, peripheral channels, pin names, and electrical limits were not supplied and therefore remain unverified.
The NXP product page describes the related MC9S12GC128 architecture as having full 16-bit data paths, an on-chip bandgap-based regulator, and an external supply range of 2.97 V to 5.5 V. Because the target is the MC9S12GC32MPBE ordering code, designers should distinguish family-level statements from exact target-device specifications and validate all pins, memories, and electrical limits against the official device documentation before release.
Typical uses include body and gateway control modules, sensor-interface controllers, actuator nodes, automotive communication equipment, and industrial embedded controllers where a 16-bit architecture, 32 KB Flash, and 52-pin package provide a practical balance of processing capability and integration. The LQFP package also offers exposed leads and inspectability, although fine-pitch assembly and layout verification remain necessary.
For new designs, preserve the verified 2.97 V to 5.5 V family-level external supply range only after confirming it for the exact ordering code. Check oscillator, reset, debug, and unused-pin requirements in the official datasheet. Because no verified target-device pinout was provided, no pin assignments are fabricated here.
This page consolidates current lifecycle information, verified distributor pricing, source-backed constraints, and explicit missing-data markers. It also separates confirmed target facts from family-level context, helping engineers assess sourcing without mistaking general S12GC information for exact MC9S12GC32MPBE specifications.
Alternativas drop-in para MC9S12GC32MPBE — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC9S12GC32MPBE (mesmo formato e footprint) — diferindo em Package, Core, Operating Temperature, Lifecycle Status, RAM.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MC9S12GC32MFUE
✅ Drop-In✓ Em estoque
$6.1 / unidade
Ver ficha técnica →MC9S12C32CPBE25
✅ Drop-In✓ Em estoque
$5.12 / unidade
Ver ficha técnica →MC9S12C64CPBE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S12GC32MPBE Classificações máximas e características elétricas
| Microcontroller Type | 16-bit HCS12 microcontroller |
| CPU Core | 16-bit HCS12 core |
| Maximum Frequency | 50 MHz |
| Flash Memory | 32 KB |
| Data Path Width | 16 bit |
| Encapsulamento | 52-pin LQFP |
| Tipo de montagem | Surface mount |
| External Supply Range | 2.97 V to 5.5 V (family-level NXP description) |
| Distributor Voltage Listing | 2.5 V / 5 V |
| Phase-Lock Loop | Yes (family-level NXP description) |
| Bandgap-Based Voltage Regulator | Yes (family-level NXP description) |
| Core Architecture | 16-bit CISC |
| Shipping Package | Tray |
| Reference Unit Price | USD 14.9905 as of 2026-10-21 |
| Observed Distributor Inventory | 5,776 pieces as of 2026-10-21 |
| Status do ciclo de vida | NRND |
Guia de Configuração de Pinos do MC9S12GC32MPBE tray
Configuração de pinos para MC9S12GC32MPBE (pacote tray). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MC9S12GC32MPBE.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC9S12GC32MPBE é adequado para 6 aplicaçãos: Automotive Body Control Module, Automotive Sensor Interface Node, Actuator and Motor Control, Industrial Communication Gateway, Data Acquisition Controller, Embedded Instrumentation.
Automotive Body Control Module
The MC9S12GC32MPBE fits legacy body-control tasks that combine 16-bit computation, 32 KB of on-chip Flash, and a 52-pin LQFP control footprint. It can coordinate switch inputs, vehicle-bus communications, diagnostic functions, and actuator outputs without relying on a separate host processor. The 50 MHz source-backed frequency provides timing headroom for multiplexed peripherals. Designers should verify exact timer, CAN, SPI, and interrupt assignments against the official target-device documentation before layout release. Because the part is NRND, it is more appropriate for sustaining an existing qualified platform than for a new long-life automotive program unless NXP expressly recommends it.
Recomendado
Automotive Sensor Interface Node
The 32-bit Flash capacity, 16-bit HCS12 data path, and 50 MHz maximum frequency make MC9S12GC32MPBE suitable for compact sensor-collection nodes that sample switches or analog conditions and communicate results to a vehicle network. The device can consolidate local conditioning control, diagnostics, debouncing, calibration storage, and communication timing in one package. Its 52-pin LQFP exposes more pins than a small-outline package, supporting mixed signal and peripheral connections, although exact analog channels and multiplexing were not supplied. Validate electrical limits, wake behavior, and bus timing in the official datasheet, and perform production software regression testing because peripheral assignments may differ across S12 derivatives.
Recomendado
Actuator and Motor Control
MC9S12GC32MPBE can serve as the supervisory controller in an actuator node where a dedicated motor driver handles power conversion and the MCU manages command decoding, interlocks, timing, and status reporting. Its verified 50 MHz HCS12 performance provides enough sequencing capability for multi-step control loops, while 32 KB Flash stores application firmware and nonvolatile parameters. The 52-pin package can support external logic interfaces and sensing connections, but exact PWM channels, timer widths, and pin multiplexing remain to be confirmed from target-device data. Keep high-current switching paths physically separated from sensitive control traces and validate timing under worst-case interrupt load.
Recomendado
Industrial Communication Gateway
The MC9S12GC32MPBE is suitable for a compact protocol gateway when firmware must retain an established HCS12 software base and run within 32 KB of Flash. It can coordinate serial data acquisition, local filtering, status LED control, configuration storage, and communication handshakes across industrial equipment. The verified 16-bit data path and 50 MHz maximum frequency suit control-oriented traffic, while the 52-pin LQFP offers generous external connections. Its NRND status means long-term availability and migration planning are essential for new equipment. Before deployment, confirm peripheral mix, operating-temperature requirements, watchdog behavior, communications timing, and lifecycle commitments for the exact ordering code.
Recomendado
Data Acquisition Controller
MC9S12GC32MPBE can coordinate a small embedded acquisition system that gathers digital inputs, performs sampling control, timestamps events, and forwards results through an external communications interface. Its 32 KB Flash stores firmware and lookup data, while the verified 50 MHz maximum rate supports deterministic supervisory sequencing. The 52-pin package permits multiple sensor-enable, trigger, status, and interface connections, subject to the actual pin mux. For measurement integrity, keep analog conditioning outside high-current switching regions, use defined grounding, and account for pin tolerance and leakage from the exact datasheet. Because no verified ADC specifications were supplied, analog measurement features must not be inferred from the family name.
Recomendado
Embedded Instrumentation
The 16-bit HCS12 architecture and 50 MHz source-backed operating frequency make MC9S12GC32MPBE relevant to compact instruments requiring deterministic control alongside communications and display support. Firmware can manage front-panel inputs, calibration values, measurement sequencing, fault flags, and host data transfer within the available 32 KB Flash. The 52-pin LQFP provides a practical pin count for mixed signal and peripheral connections. Exact LCD, timer, and analog resources were not verified, so engineers should review the official device data before selecting support components. NRND lifecycle status also requires careful product-change planning, especially for instruments designed for long service lives.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9S12GC32MPBE — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC9S12GC32MFUE | MC9S12C32CPBE25 | MC9S12C64CPBE |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 52-pin LQFP | 52-pin LQFP family candidate; exact suffix compatibility requires verification | 52-pin LQFP indicated by PE package family | 52-pin LQFP indicated by PE package family |
| Core | 16-bit HCS12 core | HCS12-family controller | 16-bit S12-family controller | 16-bit S12-family controller |
Principais diferenciais
- Higher verified clock rating than the 25 MHz comparison candidate (vs MC9S12C32CPBE25)
- Exact 32 KB Flash configuration in the target ordering code (vs MC9S12C64CPBE)
- Same NXP HCS12 ecosystem rather than a cross-vendor migration (vs Cross-brand MCU replacements)
Notas de projeto
Do not treat a related S12 device as drop-in solely because it uses an LQFP package. MC9S12GC32MPBE is a 52-pin LQFP part, and replacement approval requires an exact pin-by-pin comparison covering power, ground, reset, oscillator, debug, interrupts, communications, unused pins, and every multiplexed peripheral. The supplied cross-reference results do not establish complete pin compatibility, so validate against the official datasheets and production test data before substitution.
Design the supply network around the verified family-level external range of 2.97 V to 5.5 V, but confirm the exact limits for MC9S12GC32MPBE before selecting regulators and decoupling. Place bulk and high-frequency capacitors at the supply pins using the target-device recommendations, maintain return-current continuity, and keep analog or sensor rails away from switching-node currents. Verify startup, brownout, and reset behavior across voltage and temperature extremes.
Allocate a 52-pin LQFP land pattern and preserve pin-1 orientation exactly when reusing an existing board. Check courtyard dimensions, solder-mask clearance, assembly orientation, and exposed-versus-nonexposed pad treatment against the manufacturer package drawing. Because 52-pin LQFP leads are fine-pitch, review paste volume, reflow profile, lead coplanarity, and inspection coverage before authorizing volume production.
Separate clock and sensitive signal routing from high-current actuator or communication-driver paths. Keep the oscillator and reset traces short, avoid routing beneath noisy digital or power-conversion nodes, and provide a stable ground reference beneath the MCU wherever practical. Exact internal oscillator, reset, and debug functions were not supplied, so follow the official device layout guidance rather than relying on generic HCS12 assumptions.
Informações de conformidade
The supplied web results establish an automotive-oriented product context and NRND lifecycle status but do not explicitly state target-device RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.
