MC9SXDP512VPVR2 - 16-Bit 512KB Automotive MCU | NXP
N.º da peça: MC9SXDP512VPVR2 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $0.874 | $0,87 |
| 10 | $0.832 | $8,32 |
| 100 | $0.793 | $79,30 |
| 1.000 | $0.777 | $777,00 |
| 10.000 | $0.777 | $7.770,00 |
MC9SXDP512VPVR2 Visão geral
A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and interrupt control on one semiconductor device. Within the product hierarchy, this component is an MCU → embedded processor → semiconductor. S12X devices are designed for real-time control systems where deterministic peripheral access and integrated communication resources can reduce external component count compared with a separate processor and support devices.
The available evidence identifies the MC9S12XDP512 family as targeting automotive multiplexing. That use case commonly requires multiple communication interfaces, real-time control, and dependable peripheral integration, although individual CAN, LIN, SPI, SCI, timer, and I/O counts must be verified against the exact datasheet. The VPVR2 ordering code also selects a specific package, temperature, performance, and qualification configuration, so it should not be inferred solely from the base family name.
MC9SXDP512VPVR2 is sold through multiple distributors, but the verified search results provide inconsistent lifecycle and sourcing descriptions. DigiKey lists the part through Rochester Electronics, while other listings identify NXP USA or Freescale Semiconductor. Buyers should therefore verify authorized status, date code, flash write cycles, qualification grade, and manufacturer traceability before production release.
The 512 KB flash capacity makes this MCU relevant to automotive body, multiplexing, gateway, and distributed control designs where protocol stacks and application logic require more program memory than a small 8-bit MCU. Engineers should confirm memory maps, peripheral multiplexing, pin assignments, clocking, and electrical limits against the exact MC9S12XDP512 manufacturer datasheet before schematic capture or firmware migration.
PCB implementation should preserve the package dimensions, exposed thermal strategy, and recommended high-speed layout constraints documented for the 112-pin LQFP. Because no verified pinout or complete electrical characterization appears in the supplied results, no pin, voltage, current, timing, or thermal value should be inferred from the family description alone. The supplied listing evidence supports procurement research, but it is not a substitute for the exact manufacturer datasheet.
This page consolidates the verified distributor links, supplier pricing, family positioning, and source limitations while explicitly separating known facts from missing technical data. That distinction helps engineers qualify the device for automotive multiplexing without treating unverified generic MCU assumptions as MC9SXDP512VPVR2 specifications.
Alternativas drop-in para MC9SXDP512VPVR2 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC9SXDP512VPVR2 (mesmo formato e footprint) — diferindo em Package.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasMC9SXDP512VPVR2 Classificações máximas e características elétricas
| Device Type | 16-bit microcontroller (MCU) |
| Series / Family | MC9S12XDP512 / S12X family |
| Program Memory | 512 KB flash |
| CPU Architecture | 16-bit |
| Performance Positioning | 32-bit performance with 16-bit MCU efficiencies |
| Target Application | Automotive multiplexing |
| Encapsulamento | 112-pin LQFP |
| Package Family | LQFP surface-mount package |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do MC9SXDP512VPVR2 lqfp surface-mount package
Configuração de pinos para MC9SXDP512VPVR2 (pacote lqfp surface-mount package). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MC9SXDP512VPVR2.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MC9SXDP512VPVR2 é adequado para 6 aplicaçãos: Automotive Multiplexing Controller, Automotive Body Control Module, Vehicle Gateway Controller, Distributed Automotive Node, Automotive Communication Gateway, Industrial Real-Time Control.
Automotive Multiplexing Controller
MC9SXDP512VPVR2 fits the automotive-multiplexing role identified in the verified MC9S12XDP512 family description. Its confirmed 512 KB of flash provides room for communication handlers, node logic, diagnostics, and configuration data within one MCU. The device also belongs to a 16-bit architecture positioned for the efficiency of embedded control while delivering stronger performance than an entry-level 8-bit MCU. Before selecting it, engineers must verify the exact package pins, supported network interfaces, clock limits, watchdog functions, and automotive qualification suffix from the manufacturer datasheet.
Recomendado
Automotive Body Control Module
The MC9SXDP512VPVR2 can serve as the central controller in a distributed body or node-control design because the verified family targets automotive multiplexing and provides 512 KB of flash for application logic. A body controller may coordinate remote inputs, output logic, diagnostic routines, and communication schedules while keeping the design consolidated. The implementation must use only the exact S12X pin multiplexing and timing rules from the manufacturer documentation; none of the required I/O counts, voltage levels, or diagnostic interfaces were available in the supplied web evidence.
Recomendado
Vehicle Gateway Controller
MC9SXDP512VPVR2 is relevant to a vehicle gateway or central communications node where one embedded processor can organize multiple vehicle-network functions and retain protocol state. Its verified 512 KB flash allocation is larger than many compact 8-bit controllers and can accommodate gateway logic, message routing, diagnostics, and configuration tables. Actual CAN, LIN, or other network-port counts were not present in the verified data, so network-specific selection requires the exact datasheet and must not be based on the family name alone.
Recomendado
Distributed Automotive Node
A distributed vehicle node can use MC9SXDP512VPVR2 where local real-time processing, event handling, and network coordination are needed close to remote sensors or actuators. The S12X family's stated combination of 32-bit performance and 16-bit efficiency supports a compact control-oriented design, while 512 KB of confirmed flash provides headroom for communication and diagnostic code. Deployment requires verification of wake-up behavior, operating voltage, temperature grade, watchdog strategy, bus timing, and pin availability, none of which are verified in the supplied results.
Recomendado
Automotive Communication Gateway
MC9SXDP512VPVR2 can be evaluated for a communication gateway that translates or routes messages between vehicle network segments and executes local control tasks. The verified family positioning in automotive multiplexing supports that architecture, and its 512 KB of flash is suitable for substantial protocol and routing software compared with small 8-bit MCUs. The design cannot be released until the exact S12X communications peripherals, DMA behavior, message RAM, interrupt architecture, clocking, and electrical interface requirements are confirmed from official documentation.
Recomendado
Industrial Real-Time Control
Although the verified family documentation targets automotive multiplexing, the 16-bit real-time architecture and 512 KB flash also justify evaluation for industrial controllers with deterministic peripheral and communication requirements. Such uses could include distributed data acquisition, actuator coordination, and communications aggregation where 8-bit processing or memory is insufficient. This is not a verified automotive-only device; industrial suitability depends on its exact temperature grade, supply range, communications, qualification, and long-term availability, all of which must be established before design commitment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9SXDP512VPVR2 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Manufacturer / Brand | NXP Semiconductors |
| Device Type | 16-bit S12X microcontroller |
| Program Memory | 512 KB flash |
| CPU Architecture | 16-bit |
| Target Application | Automotive multiplexing |
| Package | 112-pin LQFP |
| Performance Positioning | 32-bit performance with 16-bit MCU efficiencies |
| Quantity-1 Reference Price | $0.874 as of 2026-10-20 |
| Drop-In Status | No verified alternatives |
Principais diferenciais
- Verified automotive-multiplexing position (vs MC9S12XDP512CPVER)
- Confirmed program-memory capacity (vs MC9S12H256VFVE)
- Documented 112-pin LQFP configuration (vs S912XEQ512J2MAA)
Notas de projeto
Do not release the PCB footprint from the MPN name alone. Verify the exact VPVR2 package drawing, 112-pin numbering, body dimensions, lead pitch, pin-one orientation, and pad geometry against the manufacturer datasheet. The available evidence supports a 112-pin LQFP classification, but it does not provide the mechanical drawing. Also check whether ground and power distribution must use specific internal pad or split-plane arrangements before finalizing copper.
Confirm the device's exact supply range, I/O voltage domains, core voltage requirements, reset pins, and power-on sequencing from the MC9S12XDP512 documentation before designing the regulator network. No operating voltage or absolute maximum ratings were supplied, so adding capacitors or selecting a supply rail would be speculative. Use the manufacturer-recommended decoupling and domain connections once those values are verified.
Treat all S12X communications and timer routes as constrained pins selected through the device pin-mux configuration. Build the schematic from the exact 112-pin ordering-code pin table, not from another XDP512 package. After programming, validate all peripheral assignments, interrupt sources, and alternate functions. Route high-current outputs and sensitive interfaces away from switching nodes, and follow the manufacturer's grounding and decoupling guidance.
Do not assume MC9S12XDP512-family naming proves compatibility with a similarly named 512 KB MCU. A safe substitution requires identical memory organization, vector tables, pin multiplexing, clocking, communications, electrical limits, package dimensions, and qualification. The supplied cross-reference tools returned generic search pages rather than validated components, and several Site MPN candidates differ in package or ordering code; treat all of them as design references until official evidence proves drop-in compatibility.
Informações de conformidade
The supplied results identify automotive multiplexing as the family target but provide no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or exact AEC-Q100 qualification evidence. Verify the VPVR2 suffix against current NXP product documentation before production use.