MCP6022-E/ST - 10MHz Dual RRO Amplifier | Microchip
N.º da peça: MCP6022-E/ST ✓ AtivoMCP6022-E/ST Visão geral
An operational amplifier is an analog signal-conditioning semiconductor that amplifies the voltage difference between its two inputs. The MCP6022 combines two amplifiers in one package, making it suitable for dual-channel signal paths. Its rail-to-rail input and output characteristics help preserve signal range in systems operating from a single low-voltage supply, where input and output common-mode limits are important design constraints.
The principal features of the MCP6022 include 10 MHz gain-bandwidth product, 8.7 nV/√Hz input noise, less than 0.5 mV typical input offset voltage, and 0.00053% THD+N distortion. Low power consumption makes it appropriate for portable instrumentation, while the 10 MHz bandwidth supports audio, filtering, sensing, and general-purpose analog signal conditioning.
The MCP6022 uses rail-to-rail input and output stages to extend usable input and output range toward the supply rails. Its CMOS architecture supports low bias current and low operating current, helping reduce loading on high-impedance sensors and reducing power demand in battery-powered systems. The two amplifiers can be configured independently for gain, filtering, buffering, or differential signal conditioning.
Typical applications include low-noise sensor interfaces, audio preamplification, active filters, data-acquisition signal conditioning, portable measurement systems, and general dual-amplifier circuits. The combination of low noise, 10 MHz bandwidth, rail-to-rail operation, and a compact TSSOP-8 package makes the MCP6022 useful where two precision analog channels are required on a space-constrained PCB.
Designers should review the manufacturer pin-description table and typical application circuit before assigning tracks. Input and output stability must be evaluated with the selected feedback network, source impedance, load, supply voltage, and decoupling capacitors. Care is also required when driving capacitive loads or operating near the limits of the rail-to-rail input and output ranges.
This page combines manufacturer specifications, practical circuit guidance, package and pin information, and qualified drop-in alternatives to support design selection and PCB reuse. It also provides a parameter-level comparison for engineers evaluating temperature-grade, automotive, and low-power family options.
Alternativas drop-in para MCP6022-E/ST — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MCP6022-E/ST (mesmo formato e footprint) — diferindo em Amplifier Type, Package, Typical Operating Current, Input Offset Voltage, Gain-Bandwidth Product.
MCP6022-I/ST
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MCP6022-E/VAO
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MCP6023-E/ST
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MCP6022-E/ST Classificações máximas e características elétricas
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels |
| Gain-Bandwidth Product | 10 MHz |
| Typical Operating Current | 1.0 mA |
| Input Offset Voltage | <0.5 mV typical |
| Input Noise Density | 8.7 nV/√Hz |
| Total Harmonic Distortion plus Noise | 0.00053% THD+N |
| Output Swing | Rail-to-rail output |
| Single-Supply Operation | Supported |
| Encapsulamento | 8-TSSOP, 4.40 mm width |
| Tipo de montagem | Surface mount |
Configuração de pinos do MCP6022-E/ST
| Pino 1 | OUTA — Amplifier A output |
| Pino 2 | IN-A — Inverting input for amplifier A |
| Pino 3 | IN+A — Non-inverting input for amplifier A |
| Pino 4 | V- — Negative supply connection |
| Pino 5 | IN+B — Non-inverting input for amplifier B |
| Pino 6 | IN-B — Inverting input for amplifier B |
| Pino 7 | OUTB — Amplifier B output |
| Pino 8 | V+ — Positive supply connection |
Aplicações típicas
MCP6022-E/ST é adequado para 6 aplicaçãos: Precision Sensor Signal Conditioning, Active Audio Preamplification, Precision Active Filtering, Portable Data Acquisition, Industrial Control Signal Interfaces, Audio Amplifier and Filter Integration.
Precision Sensor Signal Conditioning
The MCP6022-E/ST fits low-level sensor front ends requiring two amplified channels, low input noise of 8.7 nV/√Hz, and input offset voltage below 0.5 mV typical. Each amplifier can provide gain and buffering ahead of an ADC or measurement controller while drawing a typical 1.0 mA operating current. Rail-to-rail input operation increases the usable signal range in compact single-supply systems. The 10 MHz gain-bandwidth product also supports closed-loop gains where adequate phase margin and stability must be maintained.
Recomendado
Active Audio Preamplification
The MCP6022-E/ST is suitable for dual-channel audio preamplification because it combines a 10 MHz gain-bandwidth product with 0.00053% THD+N and rail-to-rail output operation. The two amplifiers can process left and right channels independently, while the low typical operating current of 1.0 mA supports compact and portable audio products. Input and output loading must remain within the manufacturer limits, and the chosen gain network should preserve stability with the source impedance and cable capacitance.
Recomendado
Precision Active Filtering
The MCP6022-E/ST can implement first- and higher-order active filters where two channels are convenient. Its 10 MHz gain-bandwidth product provides bandwidth headroom beyond many audio-band filter requirements, while input offset voltage below 0.5 mV typical helps preserve low-level signals. The two amplifiers may also form a state-variable or multiple-feedback section. Component tolerances, gain-bandwidth behavior, output loading, and bypass placement should be evaluated together for stable operation.
Recomendado
Portable Data Acquisition
The MCP6022-E/ST is appropriate for portable data-acquisition front ends where two analog channels must be conditioned before digitization. The 1.0 mA typical operating current reduces demand on battery-powered systems, while the low-noise specification supports measurement of small sensor outputs. Rail-to-rail input and output behavior is useful when the converter and sensor operate near a low-voltage supply rail. Supply bypass should be placed close to pins 4 and 8, with layout designed to minimize noise pickup.
Recomendado
Industrial Control Signal Interfaces
The MCP6022-E/ST can condition low-level control and feedback signals in industrial equipment when the system needs two independent analog channels in a compact footprint. Its rail-to-rail operation supports single-supply interface design, and the 10 MHz bandwidth is adequate for many control, monitoring, and sensor-loop functions. The TSSOP-8 package simplifies high-density routing, although industrial temperature-grade requirements may favor MCP6022-I/ST. Grounding, isolation boundaries, and protection devices remain important system-level design considerations.
Recomendado
Audio Amplifier and Filter Integration
The MCP6022-E/ST can place filtering and gain-control functions close to a high-performance audio converter. Its low distortion, 10 MHz bandwidth, and dual-channel configuration support stereo signal paths, while low typical operating current benefit space-constrained systems. Place decoupling and ground-return paths carefully to avoid coupling converter switching noise into the analog input. The output drive capability must be checked against the selected audio codec and any downstream filtering network before the circuit is finalized.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MCP6022-E/ST — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MCP6022-I/ST | MCP6022-E/VAO | MCP6023-E/ST |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-TSSOP | 8-TSSOP | 8-TSSOP | 8-TSSOP |
| Number of Amplifiers | 2 | 2 | 2 | 2 |
| Typical Operating Current | 1.0 mA | 1.0 mA | 1.0 mA | Lower-power family variant |
| Input and Output Operation | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output |
| Qualification Focus | General-purpose grade | Industrial temperature grade | Automotive-qualified option | General-purpose low-power option |
Principais diferenciais
- Combines dual-channel amplification with 10 MHz bandwidth (vs MCP6023-E/ST)
- Provides a temperature-grade option without changing the footprint (vs MCP6022-I/ST)
- Offers an automotive-qualified family option (vs MCP6022-E/VAO)
Notas de projeto
Place the supply bypass capacitor immediately between pins 4 and 8, with a short, low-impedance return path to the device ground connection. Keep amplifier input and feedback tracks away from the bypass-current loop and other high-current switching paths. Because the MCP6022-E/ST uses an 8-TSSOP package, the exposed pads of adjacent components and the narrow lead spacing require careful solder-mask and paste control.
Evaluate feedback-network values against the 10 MHz gain-bandwidth product rather than selecting them from the nominal gain alone. Low source impedances and capacitive loads can reduce phase margin, particularly at higher closed-loop gains. If the source has appreciable capacitance, add series isolation resistance and verify the complete circuit with the manufacturer's stability guidance or a simulation using the available device model.
Do not assume rail-to-rail input and output operation guarantees usable output swing exactly at the supply rails. Leave the required input common-mode and output headroom for the selected supply voltage and load. Also verify that each amplifier has an appropriate feedback path to its corresponding inverting input and that unused channels are configured according to the manufacturer recommendations.
Informações de conformidade
Compliance declarations for the exact MCP6022-E/ST ordering code are not stated in the available technical material. Confirm current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification documents with Microchip before regulatory submission.