MPC8349ECVVAJFB - PowerQUICC II Pro 533MHz SoC | NXP | Industrial
N.º da peça: MPC8349ECVVAJFB ⚠ Última compra| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $78.5 | $78,50 |
| 10 | $72.1 | $721,00 |
| 100 | $64.85 | $6.485,00 |
| 500 | $58.2 | $29.100,00 |
| 1.000 | $52.4 | $52.400,00 |
MPC8349ECVVAJFB Visão geral
A PowerQUICC II Pro is a system-on-chip (SoC) communications processor family that combines a Power Architecture CPU core with integrated peripherals designed for networking and industrial control. Within the broader taxonomy, it sits below application processors but above standalone microcontrollers, occupying the integrated communications processor category: PowerQUICC -> Power Architecture SoC -> embedded MPU -> semiconductor. This positioning explains why it is widely used in routers, switches, and industrial gateways where deterministic I/O and protocol offload matter as much as raw compute.
Key features include the e300 core with MMU and integrated L1 caches, hardware encryption and random number generation through the SEC block, dual 32-bit DDR1/DDR2 SDRAM controllers with ECC, two PCI 2.2 interfaces (one 64-bit capable), a 1 Gbps Ethernet MAC, USB 2.0 full/low speed, DUART, I2C, SPI, and GPIO. The device supports 1.8V, 2.5V, and 3.3V I/O to ease interfacing with mixed-voltage peripherals on legacy backplanes.
Architecturally, the MPC8349E family implements a unified coherent bus connecting the core, L2 cache, DDR controller, and the QUICC Engine communications block. Hardware acceleration for security and protocol handling reduces host CPU load, while the integrated SEC block handles DES, 3DES, AES, SHA, MD5, and RNG operations without host intervention.
Typical applications include industrial routers and gateways, networked PLC controllers, line cards for access equipment, secure VPN concentrators, and industrial printing/automation controllers where -40C to +105C operation is mandatory. The integrated SEC also suits payment terminals and secure remote management appliances.
Design consideration: the 672-LBGA package requires a multi-layer PCB with controlled-impedance routing for DDR2 and Ethernet; thermal management at 533 MHz is typically passive, but enclosure airflow should be evaluated for fully loaded industrial chassis.
This page synthesizes NXP product information, distributor inventory signals, and drop-in alternative analysis beyond what the manufacturer datasheet alone provides.
Alternativas drop-in para MPC8349ECVVAJFB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MPC8349ECVVAJFB (mesmo formato e footprint) — diferindo em Ethernet, Memory Controller, Security Engine, Operating Temperature, Core Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MPC8349EVVAJFB
✅ Drop-In✓ Em estoque
$56.9 / unidade
Ver ficha técnica →MPC8349ECVVAJDB
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MPC8347VVALFB
✅ Drop-In✓ Em estoque
$60.95 / unidade
Ver ficha técnica →MPC8349EVVAJDB
✅ Drop-In✓ Em estoque
$33.4 / unidade
Ver ficha técnica →MPC8349ECVVAGDB
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MPC8349ECVVAJFB Classificações máximas e características elétricas
| Core Architecture | Power Architecture (e300) |
| Core Count | 1 |
| Largura do barramento de dados | 32-bit |
| Maximum Clock Speed | 533 MHz |
| Memory Controller | DDR1/DDR2 SDRAM with ECC |
| PCI Interfaces | 2 x PCI 2.2 (one 64-bit capable) |
| Ethernet | 1 x 10/100/1000 Mbps MAC |
| USB | USB 2.0 Full/Low Speed |
| Security Engine (SEC) | Yes - DES/3DES/AES/SHA/MD5/RNG |
| Additional Interfaces | DUART, I2C, SPI, GPIO |
| I/O Voltage | 1.8V / 2.5V / 3.3V |
| Core Voltage | 1.2V (typ) |
| Temperatura de operação | -40C to +105C |
| Encapsulamento | 672-LBGA (35x35 mm) |
| Tipo de montagem | Surface Mount |
| Silicon Revision | Rev 2 |
| Status RoHS | Compliant (Pb-free TBGA) |
Guia de Configuração de Pinos do MPC8349ECVVAJFB 672-lbga (35x35 mm)
Configuração de pinos para MPC8349ECVVAJFB (pacote 672-lbga (35x35 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MPC8349ECVVAJFB.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MPC8349ECVVAJFB é adequado para 7 aplicaçãos: Industrial Routers and Gateways, Networked PLC Controllers, Access Network Line Cards, Secure VPN Concentrators, Industrial Printing and Imaging Controllers, Secure Payment Terminals and Kiosks, Industrial IoT Edge Gateways.
Industrial Routers and Gateways
The NXP MPC8349ECVVAJFB is widely deployed in industrial routers and secure gateways because it combines a 533 MHz e300 Power Architecture core with a Gigabit Ethernet MAC, dual PCI interfaces, and a hardware security engine in a single 672-LBGA SoC. The integrated SEC block accelerates AES/SHA for VPN tunnels, removing the need for an external crypto chip and saving board area. Its -40C to +105C operating range allows deployment in factory floors, outdoor enclosures, and remote cabinet installations without additional thermal conditioning. With DDR1/DDR2 controller support, designers can choose cost-optimized or bandwidth-optimized memory based on the routing throughput target. Recommended companions include the PHY (e.g., NXP MCZ801 or Marvell Alaska), SPI NOR boot flash, and an external watchdog supervisor.
Recomendado
Networked PLC Controllers
Factory automation controllers benefit from the MPC8349ECVVAJFB's deterministic PCI 2.2 connectivity for I/O expansion modules and its hardware-accelerated cryptography for secure remote management. The 533 MHz e300 core executes real-time control loops while the QUICC Engine handles protocol framing for EtherCAT, PROFINET, or Modbus TCP without burdening the host CPU. Dual DDR memory controllers with ECC support protect against soft errors in long-life industrial installations, a critical requirement for 24/7 operation. The 672-LBGA package and 1.8V/2.5V/3.3V I/O simplify integration with mixed-voltage industrial backplanes. Designers should pair this MPN with industrial-grade NAND/NOR storage and an isolated RS-485 transceiver for fieldbus connectivity.
Recomendado
Access Network Line Cards
Telecom access line cards use the MPC8349ECVVAJFB as the main control processor, leveraging its dual PCI interfaces to connect framer/serializer ASICs and its Gigabit Ethernet MAC for uplink aggregation. The integrated SEC engine provides line-rate IPSec acceleration, which is essential for encrypted backhaul without sacrificing latency. DDR2 support at 533 MHz core allows deep packet buffering for QoS scheduling and traffic shaping. The -40C to +105C industrial temperature grade accommodates outdoor DSLAM/MSAN cabinets without active cooling. Compliance with NEBS thermal envelopes is achievable with proper PCB copper area and airflow design.
Recomendado
Secure VPN Concentrators
VPN concentrators and secure remote-access appliances rely on the MPC8349ECVVAJFB's hardware security engine to handle thousands of AES/SHA tunnels without CPU bottleneck. The 533 MHz e300 core manages routing tables, session setup, and policy enforcement while the SEC accelerates bulk encryption at near line rate on the Gigabit Ethernet port. Industrial temperature rating makes the part suitable for deployment in unconditioned telecom closets. The 672-LBGA package supports high-density board layouts common in 1U/2U rackmount appliances. Pair with a hardware RNG source and a tamper-detection supervisor for FIPS-compliant deployments.
Recomendado
Industrial Printing and Imaging Controllers
High-speed industrial printers and imaging subsystems use the MPC8349ECVVAJFB to drive the print engine over PCI while managing USB 2.0 host ports for operator input panels and Gigabit Ethernet for network print queues. The 533 MHz Power Architecture core handles image rasterization at print speed, and the dual DDR controllers provide the bandwidth to feed multiple print heads in parallel. Industrial temperature operation lets the design live inside the warm printer enclosure without derating. Recommended companions include a high-speed image buffer DDR2 and a hardware watchdog for unattended recovery.
Recomendado
Secure Payment Terminals and Kiosks
PCI-compliant payment terminals and self-service kiosks benefit from the MPC8349ECVVAJFB's hardware AES/SHA engine for PIN encryption and the integrated RNG for key generation, both certified paths for retail financial deployments. The Gigabit Ethernet MAC supports high-speed transaction upload while USB 2.0 drives touchscreens, printers, and NFC readers. The industrial -40C to +105C rating accommodates outdoor kiosk installations such as fuel pumps and ticketing machines. The 672-LBGA package and RoHS compliance meet global retail hardware regulations. Pair with a secure element (e.g., MAX32590) for key custody and a hardware TRNG for FIPS 140-2 compliance.
Recomendado
Industrial IoT Edge Gateways
Edge gateways aggregating sensor data from brown-field industrial sites run the MPC8349ECVVAJFB because of its protocol versatility - DUART, I2C, SPI, USB, Ethernet, and PCI in a single SoC - and its hardware crypto for secure cloud uplink. The 533 MHz core runs protocol translation stacks (Modbus, OPC-UA, MQTT) while the SEC engine handles TLS handshakes and certificate storage. Industrial temperature rating and RoHS compliance make the design suitable for both factory retrofits and new installations. The 672-LBGA package requires a 6+ layer PCB with impedance-controlled DDR and Ethernet traces; plan thermal copper pours accordingly.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MPC8349ECVVAJFB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MPC8349EVVAJFB | MPC8349ECVVAJDB | MPC8347VVALFB | MPC8349EVVAJDB | MPC8349ECVVAGDB |
|---|---|---|---|---|---|---|
| Package | 672-LBGA (35x35 mm) | 672-LBGA (35x35) - same | 672-LBGA (35x35) - same | 672-LBGA (35x35) - same | 672-LBGA (35x35) - same | 672-LBGA (35x35) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Operating Temperature | -40C to +105C | 0C to +105C | -40C to +105C | -40C to +105C | 0C to +105C | -40C to +105C |
| Security Engine (SEC) | Yes | Yes | Yes | No | No | Yes |
| DDR Memory Support | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC |
| Lifecycle Status | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy |
| RoHS Compliance | Yes (Pb-free) | Yes (Pb-free) | Yes (Pb-free) | Yes (Pb-free) | Yes (Pb-free) | Yes (Pb-free) |
Principais diferenciais
- Industrial -40C to +105C operating window with hardware security engine (vs MPC8349EVVAJFB)
- Integrated SEC engine with AES, SHA, DES, 3DES, MD5 and RNG hardware acceleration (vs MPC8347VVALFB)
- Single 672-LBGA footprint unifies industrial, commercial, and no-crypto variants (vs MPC8349EVVAGDB)
Notas de projeto
The 672-LBGA package at 1.0 mm pitch requires a minimum 6-layer PCB with microvia or via-in-pad technology for reliable assembly. Use a 0.5 oz outer copper pour connected to the internal ground plane for thermal dissipation. Decoupling: at least one 0.1uF X7R ceramic per power pin pair, plus bulk 10uF X5R near each voltage rail. Reference the NXP MPC8349EA hardware specifications document for the recommended decoupling network.
DDR2 traces must be length-matched within 25 mil MIL per JEDEC JESD79-2 and routed on a dedicated layer between two ground planes. The 533 MHz core clock generates harmonics up to 1.6 GHz; isolate Ethernet and PCI signals with guard traces to prevent coupling into the DDR bus. Source termination on the 50 ohm clock line is required to prevent overshoot on the e300 core input.
Estimated: at 533 MHz core clock with 1.2V core supply and typical industrial activity, power dissipation is approximately 3.0-3.5W. The 672-LBGA junction-to-ambient thermal resistance is approximately 15 C/W on a 6-layer JEDEC test board, yielding a junction-to-ambient rise of ~50C at 3.3W. For sealed enclosures, provide at least 10 sq cm of PCB copper area or a small heatsink to stay within the -40C to +105C operating window at 70C ambient.
Do not confuse the JFB (TBGA industrial) part number suffix with the JDB (legacy tray) variant; both share silicon but differ in tray vs tape-and-reel. The MPC8349E requires a 32 kHz crystal for the RTC and a unique POR sequence - failure to assert HRESET within 1 ms of power stable will hang the boot ROM. Always validate the reset tree with an oscilloscope before bringing up the DDR controller.
Informações de conformidade
RoHS compliant per NXP product page and Mouser listing. Pb-free TBGA assembly. AEC-Q100 not documented for this industrial MPN. Last-time-buy lifecycle status as of 2026-10-17 per NXP.
