OPA137PA - 36V 1MHz J-FET Op Amp | Texas Instruments
N.º da peça: OPA137PA ✓ AtivoOPA137PA Visão geral
An operational amplifier is a high-gain differential amplifier used to amplify, filter, buffer, or control analog signals. The OPA137 belongs to the operational-amplifier hierarchy within analog signal-chain ICs and power management systems. Its J-FET input stage is especially useful when source impedance can cause bias-current errors, while its low quiescent current suits battery-operated and compact instrumentation.
The amplifier offers a 1 MHz gain-bandwidth product, which makes it appropriate for audio and general-purpose precision applications rather than high-speed signal chains. Its rail-to-rail input range extends to the positive supply rail, allowing the input common-mode range to follow much of the available supply voltage. The 3.5 V/µs slew rate provides useful large-signal response without requiring the bandwidth of a modern high-speed amplifier.
OPA137PA operates from a maximum total supply voltage of 36 V, supporting a nominal ±18 V operating arrangement. The device is specified as a single amplifier rather than a dual or quad configuration. Its J-FET input topology provides low bias current, while the 145 dB open-loop gain supports high-precision closed-loop designs when paired with suitable feedback components.
Typical uses include low-level audio preamplification, photodiode and sensor interfaces, precision current-to-voltage conversion, active filters, and instrumentation buffers. The low input bias current is valuable when the source has high output impedance, while the 1 MHz bandwidth supports audio-band and moderate-frequency signal paths. Single-supply operation can also simplify portable equipment when the signal remains within the rail-to-rail input range.
A primary design consideration is common-mode range: although the input can approach V+, the output range, load, supply voltage, and selected gain must remain within the operating limits. Stable operation also requires suitable output isolation, compensation, and decoupling. Review the manufacturer pin description and typical-application circuits before assigning PCB functions or connecting feedback networks.
This page combines the manufacturer product information, ordering details, package data, application guidance, and verified drop-in alternatives with practical design notes. It also highlights the trade-offs between the OPA137PA's precision and low-bias characteristics and the different bandwidth or input-stage behavior of candidate replacements.
Alternativas drop-in para OPA137PA — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com OPA137PA (mesmo formato e footprint) — diferindo em Input Bias Current, Gain-Bandwidth Product, Open-Loop Gain, Product Family, Quiescent Current.
OPA137P
✅ Drop-InConsulte o preço
Ver ficha técnica →TL061IP
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
OPA134PA
✅ Drop-InConsulte o preço
Ver ficha técnica →OPA137PA Classificações máximas e características elétricas
| Amplifier Type | Single J-FET-input operational amplifier |
| Number of Amplifier Channels | 1 channel |
| Maximum Supply Voltage | 36 V |
| Nominal Total Supply Voltage | ±18 V |
| Gain-Bandwidth Product | 1 MHz |
| Open-Loop Gain | 145 dB |
| Input Bias Current | ±10 pA |
| Corrente de repouso | 120 µA per channel |
| Slew Rate | 3.5 V/µs |
| Maximum Input Offset Voltage | 15 mV |
| Input Common-Mode Range | Rail-to-rail input to V+ |
| Encapsulamento | 8-pin PDIP |
| Package Type | Through-hole PDIP |
| Product Family | MicroAmplifier |
| Status RoHS | Compliant |
Configuração de pinos do OPA137PA
| Pino 1 | NC — Not connected (per datasheet) |
| Pino 2 | -IN — Inverting input |
| Pino 3 | +IN — Non-inverting input |
| Pino 4 | V- — Negative supply connection |
| Pino 5 | NC — Not connected (per datasheet) |
| Pino 6 | OUT — Output |
| Pino 7 | V+ — Positive supply connection |
| Pino 8 | NC — Not connected (per datasheet) |
Aplicações típicas
OPA137PA é adequado para 6 aplicaçãos: Precision Sensor Signal Conditioning, Low-Level Audio Preamplification, Transimpedance Amplification, Active Audio Filters, Battery-Powered Instrumentation, Precision Voltage Buffering.
Precision Sensor Signal Conditioning
OPA137PA is well suited to high-impedance sensor front ends because its J-FET input stage provides approximately ±10 pA input bias current. That low current reduces the offset generated when the amplifier is connected to photodiodes, electrochemical sensors, or other high-source-impedance nodes. Its 145 dB open-loop gain supports precise closed-loop amplification, while the 1 MHz gain-bandwidth product is appropriate for sensors whose useful bandwidth is well below 1 MHz. Place a suitable feedback network close to the device and verify that sensor biasing keeps the input and output inside the common-mode and output-swing limits shown in the manufacturer datasheet.
Recomendado
Low-Level Audio Preamplification
The low input bias current and low-power operation of OPA137PA make it suitable for low-level audio preamplifiers, particularly when the source has appreciable impedance. Its ±10 pA input bias current helps prevent excessive DC offset in the signal path, and the 1 MHz gain-bandwidth product comfortably covers audio frequencies. The 36 V maximum supply permits a nominal ±18 V implementation when higher headroom is useful. Designers should still evaluate output swing, distortion, and closed-loop stability at the intended gain and load, because headroom and stability change as the feedback network is adjusted.
Recomendado
Transimpedance Amplification
OPA137PA can serve as the active element in a transimpedance amplifier when very low input bias current is valuable and the required closed-loop bandwidth fits within the 1 MHz gain-bandwidth product. The J-FET input's ±10 pA bias current is helpful when converting microamp-level or nanoamp-level sensor currents into a measurable voltage. Feedback resistance determines the nominal conversion gain, so it must be balanced against input capacitance and the amplifier's noise and stability behavior. Use a guarded, low-leakage feedback node and follow the manufacturer application guidance for practical compensation and bandwidth control.
Recomendado
Active Audio Filters
OPA137PA is suitable for active filters operating within its approximately 1 MHz gain-bandwidth range, particularly when very high source impedance makes input bias current important. Its 120 µA quiescent current per channel supports compact, low-power analog sections, and the 145 dB open-loop gain can improve closed-loop accuracy near the selected operating frequency. Select resistor and capacitor values so the filter's closed-loop noise gain remains stable with the OPA137PA. The 3.5 V/µs slew rate also helps preserve waveform shape, although large-signal behavior and output loading must be checked at the lowest intended supply voltage.
Recomendado
Battery-Powered Instrumentation
OPA137PA's 120 µA quiescent current per channel makes it appropriate for low-power instrumentation that must preserve measurement accuracy rather than merely provide gain. Its J-FET input reduces bias-current error at the input, while the 1 MHz bandwidth allows the device to handle audio-band and general measurement signals. A compact implementation still needs careful attention to supply current, regulator noise, grounding, and the input common-mode range. The rail-to-rail input to V+ can help maximize usable signal range in a single-supply system, but output swing and load capability must remain compatible with the selected operating point.
Recomendado
Precision Voltage Buffering
OPA137PA can buffer high-impedance voltage sources where the input must not significantly disturb the source. Its ±10 pA input bias current limits the error introduced by the amplifier input, and the 145 dB open-loop gain supports accurate voltage following. The 1 MHz gain-bandwidth product is suitable for slow control signals and audio-band measurements rather than high-speed data acquisition. In a unity-gain buffer, confirm stability, capacitive-load tolerance, and output-current requirements for the connected source and load, then place the feedback connection directly at the device pins to avoid additional instability.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para OPA137PA — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | OPA137P | TL061IP | OPA134PA |
|---|---|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Channels | 1 channel | 1 channel | 1 channel | 1 channel |
| Input Stage | J-FET | J-FET | Bipolar | J-FET |
Principais diferenciais
- Preserves the OPA137 family's low-bias J-FET behavior (vs TL061IP)
- Closest same-family architecture and package (vs OPA134PA)
- Family-identical replacement path (vs OPA137P)
Notas de projeto
Do not treat a matching PDIP footprint as proof of electrical interchangeability. OPA137PA uses a low-bias J-FET input, whereas TL061IP uses a bipolar input; replacing it can materially change input offset error, noise, and the usable source impedance. OPA137P is the preferred same-family candidate. For OPA134PA, compare offset voltage, bandwidth, slew rate, noise, and supply limits against the original circuit. Verify every pin function in the manufacturer pin-description table before PCB reuse.
Route the non-inverting and inverting inputs away from high-current supply paths and switching-node copper. For high-impedance sources, minimize leakage through board contamination, protection diodes, and nearby moisture; the OPA137PA's approximately ±10 pA bias current otherwise offers little margin if leakage approaches that level. Keep the feedback components and their sensitive input node compact, and place the supply bypass capacitor close to the V+ and V- pins with a short, low-inductance return path.
Design the feedback network for the operating frequency rather than relying only on the nominal 1 MHz gain-bandwidth product. Noise gain, source capacitance, and capacitive loading can reduce usable closed-loop bandwidth or cause instability. Begin with a conventional feedback topology, check the resulting noise gain across the signal range, and isolate the output from highly capacitive loads when necessary. Keep the 3.5 V/µs slew rate in view when calculating large-signal settling behavior.
Confirm the actual supply combination, output swing, and dissipation at maximum signal and load before choosing an amplifier architecture. OPA137PA supports a maximum total supply voltage of 36 V and a nominal ±18 V arrangement, but allowing the output to reach either rail may violate the usable output-swing limits. Use the manufacturer's typical application circuits as the starting point for supply bypassing, grounding, and feedback layout, then validate stability and thermal behavior in the final enclosure and load configuration.
Informações de conformidade
RoHS compliance is identified for OPA137PA. No explicit AEC-Q100 qualification is identified for this exact device, so it is recorded as not qualified rather than inferred. REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer's current compliance documentation.