OPA137PA - 36V 1MHz J-FET Op Amp | Texas Instruments
MPN: OPA137PA ✓ فعالOPA137PA نمای کلی
An operational amplifier is a high-gain differential amplifier used to amplify, filter, buffer, or control analog signals. The OPA137 belongs to the operational-amplifier hierarchy within analog signal-chain ICs and power management systems. Its J-FET input stage is especially useful when source impedance can cause bias-current errors, while its low quiescent current suits battery-operated and compact instrumentation.
The amplifier offers a 1 MHz gain-bandwidth product, which makes it appropriate for audio and general-purpose precision applications rather than high-speed signal chains. Its rail-to-rail input range extends to the positive supply rail, allowing the input common-mode range to follow much of the available supply voltage. The 3.5 V/µs slew rate provides useful large-signal response without requiring the bandwidth of a modern high-speed amplifier.
OPA137PA operates from a maximum total supply voltage of 36 V, supporting a nominal ±18 V operating arrangement. The device is specified as a single amplifier rather than a dual or quad configuration. Its J-FET input topology provides low bias current, while the 145 dB open-loop gain supports high-precision closed-loop designs when paired with suitable feedback components.
Typical uses include low-level audio preamplification, photodiode and sensor interfaces, precision current-to-voltage conversion, active filters, and instrumentation buffers. The low input bias current is valuable when the source has high output impedance, while the 1 MHz bandwidth supports audio-band and moderate-frequency signal paths. Single-supply operation can also simplify portable equipment when the signal remains within the rail-to-rail input range.
A primary design consideration is common-mode range: although the input can approach V+, the output range, load, supply voltage, and selected gain must remain within the operating limits. Stable operation also requires suitable output isolation, compensation, and decoupling. Review the manufacturer pin description and typical-application circuits before assigning PCB functions or connecting feedback networks.
This page combines the manufacturer product information, ordering details, package data, application guidance, and verified drop-in alternatives with practical design notes. It also highlights the trade-offs between the OPA137PA's precision and low-bias characteristics and the different bandwidth or input-stage behavior of candidate replacements.
جایگزینهای drop-in برای OPA137PA — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای OPA137PA (همان فرمفاکتور و فوتپرینت) — متفاوت در Input Bias Current, Gain-Bandwidth Product, Open-Loop Gain, Product Family, Quiescent Current.
OPA137P
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←TL061IP
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
OPA134PA
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←OPA137PA حداکثر مقادیر مجاز و مشخصات الکتریکی
| Amplifier Type | Single J-FET-input operational amplifier |
| Number of Amplifier Channels | 1 channel |
| Maximum Supply Voltage | 36 V |
| Nominal Total Supply Voltage | ±18 V |
| Gain-Bandwidth Product | 1 MHz |
| Open-Loop Gain | 145 dB |
| Input Bias Current | ±10 pA |
| جریان سکون | 120 µA per channel |
| Slew Rate | 3.5 V/µs |
| Maximum Input Offset Voltage | 15 mV |
| Input Common-Mode Range | Rail-to-rail input to V+ |
| بستهبندی | 8-pin PDIP |
| Package Type | Through-hole PDIP |
| Product Family | MicroAmplifier |
| وضعیت RoHS | Compliant |
پیکربندی پین OPA137PA
| پین 1 | NC — Not connected (per datasheet) |
| پین 2 | -IN — Inverting input |
| پین 3 | +IN — Non-inverting input |
| پین 4 | V- — Negative supply connection |
| پین 5 | NC — Not connected (per datasheet) |
| پین 6 | OUT — Output |
| پین 7 | V+ — Positive supply connection |
| پین 8 | NC — Not connected (per datasheet) |
کاربردهای معمول
OPA137PA مناسب است برای 6 کاربردs: Precision Sensor Signal Conditioning, Low-Level Audio Preamplification, Transimpedance Amplification, Active Audio Filters, Battery-Powered Instrumentation, Precision Voltage Buffering.
Precision Sensor Signal Conditioning
OPA137PA is well suited to high-impedance sensor front ends because its J-FET input stage provides approximately ±10 pA input bias current. That low current reduces the offset generated when the amplifier is connected to photodiodes, electrochemical sensors, or other high-source-impedance nodes. Its 145 dB open-loop gain supports precise closed-loop amplification, while the 1 MHz gain-bandwidth product is appropriate for sensors whose useful bandwidth is well below 1 MHz. Place a suitable feedback network close to the device and verify that sensor biasing keeps the input and output inside the common-mode and output-swing limits shown in the manufacturer datasheet.
پیشنهادی
Low-Level Audio Preamplification
The low input bias current and low-power operation of OPA137PA make it suitable for low-level audio preamplifiers, particularly when the source has appreciable impedance. Its ±10 pA input bias current helps prevent excessive DC offset in the signal path, and the 1 MHz gain-bandwidth product comfortably covers audio frequencies. The 36 V maximum supply permits a nominal ±18 V implementation when higher headroom is useful. Designers should still evaluate output swing, distortion, and closed-loop stability at the intended gain and load, because headroom and stability change as the feedback network is adjusted.
پیشنهادی
Transimpedance Amplification
OPA137PA can serve as the active element in a transimpedance amplifier when very low input bias current is valuable and the required closed-loop bandwidth fits within the 1 MHz gain-bandwidth product. The J-FET input's ±10 pA bias current is helpful when converting microamp-level or nanoamp-level sensor currents into a measurable voltage. Feedback resistance determines the nominal conversion gain, so it must be balanced against input capacitance and the amplifier's noise and stability behavior. Use a guarded, low-leakage feedback node and follow the manufacturer application guidance for practical compensation and bandwidth control.
پیشنهادی
Active Audio Filters
OPA137PA is suitable for active filters operating within its approximately 1 MHz gain-bandwidth range, particularly when very high source impedance makes input bias current important. Its 120 µA quiescent current per channel supports compact, low-power analog sections, and the 145 dB open-loop gain can improve closed-loop accuracy near the selected operating frequency. Select resistor and capacitor values so the filter's closed-loop noise gain remains stable with the OPA137PA. The 3.5 V/µs slew rate also helps preserve waveform shape, although large-signal behavior and output loading must be checked at the lowest intended supply voltage.
پیشنهادی
Battery-Powered Instrumentation
OPA137PA's 120 µA quiescent current per channel makes it appropriate for low-power instrumentation that must preserve measurement accuracy rather than merely provide gain. Its J-FET input reduces bias-current error at the input, while the 1 MHz bandwidth allows the device to handle audio-band and general measurement signals. A compact implementation still needs careful attention to supply current, regulator noise, grounding, and the input common-mode range. The rail-to-rail input to V+ can help maximize usable signal range in a single-supply system, but output swing and load capability must remain compatible with the selected operating point.
پیشنهادی
Precision Voltage Buffering
OPA137PA can buffer high-impedance voltage sources where the input must not significantly disturb the source. Its ±10 pA input bias current limits the error introduced by the amplifier input, and the 145 dB open-loop gain supports accurate voltage following. The 1 MHz gain-bandwidth product is suitable for slow control signals and audio-band measurements rather than high-speed data acquisition. In a unity-gain buffer, confirm stability, capacitive-load tolerance, and output-current requirements for the connected source and load, then place the feedback connection directly at the device pins to avoid additional instability.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای OPA137PA — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | OPA137P | TL061IP | OPA134PA |
|---|---|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Channels | 1 channel | 1 channel | 1 channel | 1 channel |
| Input Stage | J-FET | J-FET | Bipolar | J-FET |
تفاوتهای کلیدی
- Preserves the OPA137 family's low-bias J-FET behavior (در مقابلTL061IP)
- Closest same-family architecture and package (در مقابلOPA134PA)
- Family-identical replacement path (در مقابلOPA137P)
یادداشتهای طراحی
Do not treat a matching PDIP footprint as proof of electrical interchangeability. OPA137PA uses a low-bias J-FET input, whereas TL061IP uses a bipolar input; replacing it can materially change input offset error, noise, and the usable source impedance. OPA137P is the preferred same-family candidate. For OPA134PA, compare offset voltage, bandwidth, slew rate, noise, and supply limits against the original circuit. Verify every pin function in the manufacturer pin-description table before PCB reuse.
Route the non-inverting and inverting inputs away from high-current supply paths and switching-node copper. For high-impedance sources, minimize leakage through board contamination, protection diodes, and nearby moisture; the OPA137PA's approximately ±10 pA bias current otherwise offers little margin if leakage approaches that level. Keep the feedback components and their sensitive input node compact, and place the supply bypass capacitor close to the V+ and V- pins with a short, low-inductance return path.
Design the feedback network for the operating frequency rather than relying only on the nominal 1 MHz gain-bandwidth product. Noise gain, source capacitance, and capacitive loading can reduce usable closed-loop bandwidth or cause instability. Begin with a conventional feedback topology, check the resulting noise gain across the signal range, and isolate the output from highly capacitive loads when necessary. Keep the 3.5 V/µs slew rate in view when calculating large-signal settling behavior.
Confirm the actual supply combination, output swing, and dissipation at maximum signal and load before choosing an amplifier architecture. OPA137PA supports a maximum total supply voltage of 36 V and a nominal ±18 V arrangement, but allowing the output to reach either rail may violate the usable output-swing limits. Use the manufacturer's typical application circuits as the starting point for supply bypassing, grounding, and feedback layout, then validate stability and thermal behavior in the final enclosure and load configuration.
اطلاعات انطباق
RoHS compliance is identified for OPA137PA. No explicit AEC-Q100 qualification is identified for this exact device, so it is recorded as not qualified rather than inferred. REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer's current compliance documentation.