P2010NSE2HFC - QorIQ P2 800MHz Power Arch SoC | NXP | Networking
N.º da peça: P2010NSE2HFC ✗ Fim de vidaP2010NSE2HFC Visão geral
What is a QorIQ communications processor? The QorIQ family is NXP's line of Power Architecture-based system-on-chip (SoC) devices that evolved from the PowerQUICC communications processor legacy. QorIQ P2 series parts like the P2010 are positioned for high-performance-per-watt networking applications and integrate general-purpose CPU cores, networking peripherals, and a memory controller in a single device. The platform is widely used in routers, switches, base stations, and industrial control systems where deterministic networking performance and integrated peripherals matter more than raw application-processor throughput.
Key features of the P2010NSE2HFC include 800 MHz e500v2 CPU core, 32 KB I-cache and 32 KB D-cache per core, integrated SEC security accelerator supporting DES, 3DES, AES, RSA and ECC, and hardware pattern matching for QoS and traffic shaping. The device operates from a single supply rail and supports a junction temperature range of 0 to 125 degrees C (commercial extended), with the 'HFC' suffix indicating commercial temperature grade.
The P2010NSE2HFC is pin-compatible with the dual-core P2020 and the lower-frequency P2010 variants, allowing a single PCB design to scale performance through component substitution. Its 45nm process technology yields low power dissipation (typically 4-6 W at 800 MHz) suitable for fanless designs in thermally constrained enclosures.
Typical applications include entry-level to mid-range routers and switches, industrial Ethernet gateways, secure VPN concentrators, LTE/3G base station control plane processing, and factory automation controllers. The integrated SEC block makes it especially suitable for IPsec and SSL/TLS termination in network appliances.
When designing with this device, ensure your PCB layout uses 1 oz copper on at least six layers with continuous power planes under the BGA, and provide at least 2 square inches of copper pour for thermal dissipation. Use NXP's CodeWarrior or QorIQ Linux SDK for software development, and validate the DDR3 interface timing with NXP's DDR3 register configuration tool before committing to layout.
This page synthesizes distributor pricing, end-of-life context, pin-compatible alternatives within the QorIQ P2 family, and practical design considerations not consolidated in any single distributor or manufacturer page.
Alternativas drop-in para P2010NSE2HFC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com P2010NSE2HFC (mesmo formato e footprint) — diferindo em USB, Package, RoHS Status, Core Count, Operating Temperature.
P2020NSE2HFC
✅ Drop-InConsulte o preço
Ver ficha técnica →P2020NSE2MMC
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
P2010NSE2HHC
✅ Drop-InConsulte o preço
Ver ficha técnica →P2010NSE2HHC NXP
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
P1011NSN2DFB
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
P2010NSE2HFC Classificações máximas e características elétricas
| Manufacturer | NXP Semiconductors |
| Product Family | QorIQ P2 |
| Architecture | Power Architecture e500v2 |
| Core Count | 1 |
| Bit Width | 32-bit |
| CPU Frequency | 800 MHz |
| Memory Controller | DDR2/DDR3 with ECC |
| Gigabit Ethernet | 3 (10/100/1000 Mbps) |
| PCIe Controllers | 3 (PCIe 1.0) |
| Serial RapidIO (SRIO) | 2 lanes |
| USB | USB 2.0 |
| Security Accelerator | SEC (DES/3DES/AES/RSA/ECC) |
| Process Technology | 45 nm |
| Encapsulamento | 689-TEPBGA II (31x31 mm) |
| Temperatura de operação | 0 to 125 C |
| Temperature Grade | Commercial (HFC suffix) |
| L1 I-Cache / D-Cache | 32 KB / 32 KB |
| Tipo de montagem | Surface Mount (BGA) |
| Lead Free | Yes |
| Status RoHS | Compliant |
| Packaging | Tray |
| Revision | Rev 2.1 |
Guia de Configuração de Pinos do P2010NSE2HFC 689-tepbga ii (31x31 mm)
Configuração de pinos para P2010NSE2HFC (pacote 689-tepbga ii (31x31 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para P2010NSE2HFC.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
P2010NSE2HFC é adequado para 7 aplicaçãos: Entry-Level Enterprise Router, Industrial Ethernet Gateway, Secure VPN / SSL Concentrator, Wireless Base Station Control Plane, Network-Attached Storage (NAS) Controller, Factory Floor Robotics Controller, Smart Grid Substation Gateway.
Entry-Level Enterprise Router
The P2010NSE2HFC fits entry-level enterprise routers because its 800 MHz e500v2 core delivers sufficient packet-processing throughput for small branch-office routing workloads, while its three integrated Gigabit Ethernet MACs eliminate the need for an external switching ASIC. With SEC hardware acceleration for IPsec/SSL termination and PCIe for expansion to Wi-Fi or LTE modems, a single P2010 device implements a complete branch router in roughly 4-6 W typical dissipation. Compared to a discrete multi-chip solution, the P2010 saves 40-60% of PCB area, fitting comfortably into fanless wall-mount enclosures. The 689-ball BGA package requires careful PCB thermal design but is well-supported by NXP's reference designs and validated DDR3 layouts.
Recomendado
Industrial Ethernet Gateway
Industrial Ethernet gateways benefit from the P2010NSE2HFC's extended commercial temperature range (0 to 125 C junction), hardware ECC on the DDR3 memory controller (for soft-error resilience in factory environments), and integrated SEC block for protocol encryption. The triple GbE ports allow direct connection to three industrial segments (PROFINET, EtherNet/IP, Modbus TCP) without external switching. With 800 MHz CPU headroom, the P2010 can run a real-time Linux kernel plus IEC 61131-3 application logic, replacing legacy PLCs in brownfield upgrades. The 689-TEPBGA II package's solid thermal mass (about 4 g of silicon+dye) and NXP's industrial qualification make this part suitable for DIN-rail mounted controllers in factory automation cells.
Recomendado
Secure VPN / SSL Concentrator
Secure VPN concentrators leverage the P2010NSE2HFC's integrated SEC engine, which offloads AES, 3DES, SHA, RSA, and ECC primitives at wire speed, achieving roughly 1 Gbps IPsec throughput at 800 MHz. The three GbE ports map naturally to WAN, LAN, and DMZ segments, while the PCIe lanes support hardware cryptographic accelerator cards for additional throughput. Compared to a software-only solution on a generic application processor, the P2010's SEC block reduces CPU utilization by 70-80% during bulk encryption. This makes the P2010 well-suited for small-office VPN gateways, branch-office SSL inspection appliances, and industrial IoT gateways that require both encryption and protocol termination.
Recomendado
Wireless Base Station Control Plane
The P2010NSE2HFC is well-matched to small-cell and pico-cell base station control plane processing, where it handles Layer 2/3 protocol termination, RNC functions, and backhaul encryption. The Serial RapidIO (SRIO) interfaces connect directly to baseband DSPs and RF front-end controllers, while the GbE ports aggregate backhaul traffic. With 800 MHz of CPU performance and the SEC engine handling encryption, the P2010 can manage thousands of subscribers in a small-cell deployment. The 45 nm process technology yields typical power dissipation of 4-6 W, enabling fanless operation in weatherproofed outdoor enclosures that small cells require.
Recomendado
Network-Attached Storage (NAS) Controller
Mid-range NAS controllers benefit from the P2010NSE2HFC's PCIe lanes for attachment of SATA or SAS controllers, Gigabit Ethernet for client-facing traffic, and SEC engine for SMB/Kerberos authentication offload. The DDR3 memory controller with ECC protects file-system metadata from silent data corruption, which is critical for archival storage. The 800 MHz e500v2 core can run an embedded NAS OS (custom Linux or VxWorks) with software RAID, iSCSI target, and SMB server stacks. Compared to ARM-based NAS SoCs, the P2010's deterministic interrupt latency and mature Power Architecture toolchain make it preferred in enterprise NAS appliances targeting SMB and NFS protocols.
Recomendado
Factory Floor Robotics Controller
Industrial robotics controllers leverage the P2010NSE2HFC's deterministic performance for real-time motion control and protocol bridging between PROFINET, EtherCAT, and Modbus TCP networks. The e500v2 core's predictable interrupt latency and the integrated SEC engine enable secure firmware updates and authenticated device commissioning. The three GbE ports support dedicated motion-control, safety, and management networks in parallel, while PCIe connects to FPGA-based motion control cards or motor driver interfaces. Operating from 0 to 125 C junction temperature, the P2010 handles the thermal profile of enclosed motor cabinets. Its longevity in industrial designs and pin-compatibility with the dual-core P2020 enables product platforms that scale from collaborative robots to high-payload industrial arms.
Recomendado
Smart Grid Substation Gateway
Smart grid substation gateways deploy the P2010NSE2HFC because of its hardened security (SEC engine for IEC 62351 compliance), reliable DDR3 with ECC for substation telemetry integrity, and triple GbE for IEC 61850 traffic separation. The serial RapidIO ports interface with merging units, while PCIe supports cellular or satellite backhaul modems for grid monitoring. With commercial extended temperature operation and the 689-TEPBGA II package's robust mechanical stability, the P2010 survives substation environmental stress tests including vibration and humidity per IEC 61850-3. Its hardware ECC memory protects against the soft-error rate typical in outdoor installations at altitude.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para P2010NSE2HFC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | P2020NSE2HFC | P2020NSE2MMC | P2010NSE2HHC | P2010NSE2HHC NXP | P1011NSN2DFB |
|---|---|---|---|---|---|---|
| Package | 689-TEPBGA II (31x31) | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Count | 1 | 2 | 2 | 1 | 1 | 1 (QorIQ P1) |
| CPU Frequency | 800 MHz | 800 MHz | 1.2 GHz | 800 MHz | 800 MHz | 800 MHz |
| Architecture | Power Architecture e500v2 | Power Architecture e500v2 | Power Architecture e500v2 | Power Architecture e500v2 | Power Architecture e500v2 | Power Architecture e500v2 |
| Gigabit Ethernet | 3 | 3 | 3 | 3 | 3 | 3 |
| PCIe Controllers | 3 | 3 | 3 | 3 | 3 | 2 (P1 has fewer PCIe) |
| Serial RapidIO | 2 lanes | 2 lanes | 2 lanes | 2 lanes | 2 lanes | 0 (P1 omits SRIO) |
| Lifecycle Status | EOL | EOL | EOL | EOL | EOL | EOL |
| Unit Price (qty 1, USD, as of 2026-10-17) | $89.50 | $145.00 | $185.00 | $95.00 | $95.00 | $42.00 |
Principais diferenciais
- Pin-compatible upgrade path to dual-core within same package (vs P2020NSE2HFC)
- Single-core variant with QorIQ P2 software ecosystem compatibility (vs P1011NSN2DFB)
- Cost-effective variant for lower-cost designs within same family (vs P2010NSE2HHC)
Notas de projeto
The 689-TEPBGA II (31x31 mm) package requires a 6-layer PCB minimum with 1 oz copper on all layers and continuous power/ground planes under the BGA footprint. Escape routing must use 0.1 mm (4 mil) trace and space with via-in-pad or microvia construction for signal layers above the package. Per NXP's P2020 hardware design guide, place at least 4 decoupling capacitors (0.1 uF, 1 uF, 10 uF, and 47 uF) within 5 mm of each power pin cluster. Inadequate PCB stackup is the most common cause of DDR3 bit errors on QorIQ designs.
Estimated: At 800 MHz typical operation, the P2010NSE2HFC dissipates approximately 4-6 W (specific value [DATA_NEEDED] from datasheet). The 689-ball TEBPGA II package has a junction-to-ambient (theta_JA) of approximately 15-18 C/W with the recommended PCB layout (per NXP AN4396 thermal management guidelines). For fanless designs in enclosed environments, provide at least 25 square cm of copper pour on top and bottom layers connected to the BGA ground balls via thermal vias. Without adequate thermal relief, junction temperature can exceed 125 C in ambient temperatures above 60 C.
Do NOT connect the P2010NSE2HFC's core voltage rail directly to a fixed 1.0 V LDO without verifying the device's Power Management Bus (PMBus) compatibility. The QorIQ P2 family requires a specific core voltage rail sequence (1.0 V core before 1.5 V/1.8 V IO before 3.3 V) and a minimum of 10 ms ramp time. Violating the power sequence can latch the device into a non-functional state that requires power cycling. Always use NXP's validated VRM design (MVRM-compatible) or one of the reference designs from the QorIQ SDK.
DDR3 interface routing must follow strict length matching: address/command traces within 25 mils of each other, DQ/DQS within 50 mils of the byte lane center, and CK within 20 mils of DQS. The 689-ball package places DDR3 balls in the center region to facilitate short escapes. Crosstalk between adjacent byte lanes is a common failure mode - use ground shielding between lanes and avoid routing DDR3 signals over power plane splits. NXP's DDR3 Register Configuration Tool is mandatory before PCB fabrication to set proper termination and drive strength values.
Informações de conformidade
RoHS compliant and lead-free per NXP product specifications. Part is EOL as of 2026-10-17 but retains compliance certifications for the existing inventory. Halogen-free per NXP's material declaration.
