PCM1870RHFR - 16-Bit Stereo Audio ADC | Texas Instruments
N.º da peça: PCM1870RHFR ✓ AtivoPCM1870RHFR Visão geral
An audio ADC is a data-converter IC that converts left- and right-channel analog audio signals into digital data for processing, storage, or transmission. The PCM1870 belongs to the broader ADC and data-converter hierarchy, combining low-noise analog capture with programmable microphone conditioning and digital control functions in one compact package.
Key features include 16-bit resolution, a sampling rate of 5 kSPS to 50 kSPS, and 90 dB signal-to-noise ratio. The integrated microphone bias supports condenser microphones, while automatic level control helps maintain usable signal amplitude in changing acoustic conditions. Sound-effect and notch-filter functions add practical signal conditioning without requiring separate support ICs.
The device accepts single-ended or differential audio inputs and communicates through I2C, serial, or SPI. Its low-power design is suited to portable audio capture, industrial monitoring, and embedded systems where a compact converter with integrated microphone support simplifies both board area and component count. The manufacturer datasheet also notes that the package thermal pad must be soldered to the PCB for thermal and mechanical performance.
Typical applications include USB microphones, conference equipment, voice-capture modules, industrial acoustic monitors, and consumer recording products. The 5 kSPS to 50 kSPS range covers voice and low-bandwidth audio, while the 90 dB SNR supports higher-quality signal acquisition than a basic low-resolution interface.
For PCB implementation, follow the manufacturer land pattern and connect the exposed thermal pad to the ground plane. Place input, reference, and decoupling components close to their associated pins, and route the serial interface away from sensitive analog inputs to reduce digital coupling into the captured signal.
This page consolidates the PCM1870RHFR electrical identity, interface details, application guidance, engineering considerations, and verified drop-in candidates into a design-focused reference for audio engineers evaluating the part for new or existing PCB layouts.
Alternativas drop-in para PCM1870RHFR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PCM1870RHFR (mesmo formato e footprint) — diferindo em Converter Type, Input Type, Mounting Type, Package.
PCM1870RHFT
✅ Drop-InConsulte o preço
Ver ficha técnica →PCM1870RHFR Classificações máximas e características elétricas
| Converter Type | Stereo audio ADC |
| Resolução | 16 bit |
| Taxa de amostragem | 5 kSPS to 50 kSPS |
| Signal-to-Noise Ratio | 90 dB |
| Number of ADC Channels | 4 channels |
| Input Type | Single-ended or differential |
| Digital Interface | I2C, serial, and SPI |
| Microphone Bias | Integrated microphone bias |
| Automatic Level Control | Integrated ALC |
| Sound Effect Processing | Integrated sound-effect function |
| Notch Filter | Integrated notch filter |
| Power Class | Low-power |
| Encapsulamento | 24-pin VQFN (RHF), 5 mm x 4 mm |
| Tipo de montagem | Surface mount |
| Contagem de pinos | 24 pins |
| Peak Reflow Temperature | 260 C |
Guia de Configuração de Pinos do PCM1870RHFR 24-pin vqfn (rhf), 5 mm x 4 mm
Configuração de pinos para PCM1870RHFR (pacote 24-pin vqfn (rhf), 5 mm x 4 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para PCM1870RHFR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PCM1870RHFR é adequado para 6 aplicaçãos: USB Conference Microphone, Industrial Acoustic Monitoring, Voice Recognition Terminal, Stereo Audio Interface, Portable Recording Accessory, Consumer Audio Capture Module.
USB Conference Microphone
The PCM1870RHFR fits USB conference microphones because it combines a 16-bit stereo ADC with 5 kSPS-to-50 kSPS sampling, microphone bias, and automatic level control in one package. The integrated bias removes the need for a separate microphone-bias source, while ALC helps maintain a consistent capture level as users move closer to or farther from the microphone. Its 90 dB SNR supports intelligible speech reproduction, and the 5 mm by 4 mm VQFN footprint leaves space for USB-interface and isolation components. A system designer should route the two analog channels away from USB clock and data lines, connect the exposed pad to ground, and verify microphone bias voltage and input headroom against the chosen capsule.
Recomendado
Industrial Acoustic Monitoring
PCM1870RHFR is suitable for industrial acoustic monitoring when the target signal occupies the voice or low-bandwidth audio range. The converter captures two analog channels at 16-bit resolution with a 90 dB SNR, while programmable gain and integrated level control help accommodate changing sound levels. The notch filter can suppress a fixed unwanted frequency when configured appropriately, and the sound-effect function adds local signal processing without a separate audio DSP. Because industrial installations can contain motor drive and switching equipment, analog input routing requires short traces, solid ground reference, and isolation from high-current paths. The 5 kSPS-to-50 kSPS limit should be checked against the required signal bandwidth before deployment.
Recomendado
Voice Recognition Terminal
The PCM1870RHFR supports voice-recognition terminals that require a compact two-channel analog front end with microphone conditioning. Its 16-bit conversion and 90 dB SNR provide adequate signal integrity for speech capture, while the 50 kSPS maximum rate covers the audio bandwidth commonly required by voice-processing pipelines. Automatic level control reduces amplitude variation caused by different speaking distances, and the integrated notch filter can address a persistent tonal interference. The digital I2C, serial, or SPI interface allows connection to a suitable embedded controller without requiring a parallel data bus. Designers should establish clean microphone grounding, verify the bias network against the capsule specification, and keep switching regulators and digital clocks separated from the analog input traces.
Recomendado
Stereo Audio Interface
PCM1870RHFR can serve as the stereo front end in a compact audio interface requiring simultaneous left- and right-channel conversion. The 16-bit ADC operates across a 5 kSPS-to-50 kSPS range, allowing the same design to serve speech, telephony, monitoring, and other bandwidth-limited stereo sources. Integrated gain and microphone-related conditioning reduce the number of external analog functions, while three interface choices support different host architectures. The device also accepts differential inputs, which can improve common-noise rejection when the source and converter grounds are carefully managed. In implementation, preserve symmetry between the two channels and avoid sharing long analog traces with digital clocks. Check the manufacturer input-bias, common-mode, and sampling-circuit recommendations before finalizing the front end.
Recomendado
Portable Recording Accessory
PCM1870RHFR is appropriate for a portable recording accessory where low power, compact size, and integrated microphone support are priorities. Its low-power operation reduces the burden on a battery-powered design, while the 24-pin VQFN package provides a compact landing area for portable audio products. The 16-bit converter and 90 dB SNR are useful for voice memos, wearable accessories, and compact stereo recorders, while ALC can stabilize recording level during movement. Automatic control must still be validated against the intended use because excessive gain can increase distortion on sudden loud sounds. The PCB should minimize analog trace length, maintain a continuous ground reference, and use the manufacturer-prescribed exposed-pad and decoupling layout to preserve performance.
Recomendado
Consumer Audio Capture Module
PCM1870RHFR fits consumer audio capture modules requiring microphone bias, automatic gain behavior, and flexible digital connectivity without a large analog support circuit. The 90 dB SNR supports clean voice and general audio capture, while the 5 kSPS-to-50 kSPS range accommodates compressed-voice and narrowband audio workloads. I2C can support configuration from a low-power host, while serial or SPI options can suit a higher-throughput embedded controller. The sound-effect and notch-filter functions can simplify a basic consumer feature set, although their exact configuration must be evaluated with representative signals. Place the microphone input and bias network close to the converter, isolate the analog return path from display and power-converter activity, and validate startup behavior with the intended microphone capsule.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PCM1870RHFR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PCM1870RHFT |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 24-pin VQFN (RHF), 5 mm x 4 mm | 24-pin VQFN (RHF), 5 mm x 4 mm |
| Converter Function | Stereo audio ADC | Stereo audio ADC |
| Resolution | 16 bit | 16 bit |
| Sampling Rate | 5 kSPS to 50 kSPS | 5 kSPS to 50 kSPS |
| Signal-to-Noise Ratio | 90 dB | 90 dB |
| Digital Interface | I2C, serial, and SPI | I2C, serial, and SPI |
| Microphone Features | Microphone bias, ALC, sound effect, and notch filter | Microphone bias, ALC, sound effect, and notch filter |
| Orderable Suffix | RHFR | RHFT |
Principais diferenciais
- Integrated microphone signal-conditioning functions (vs PCM1870RHFT)
- 16-bit stereo conversion with 90 dB SNR (vs PCM1870RHFT)
- Compact 24-pin VQFN implementation (vs PCM1870RHFT)
Notas de projeto
Follow the Texas Instruments RHF land pattern exactly and solder the exposed thermal pad to the ground plane as directed by the manufacturer. Place input and decoupling components close to their associated pins, provide a low-impedance ground reference, and route I2C, serial, SPI, and clock signals away from the microphone and analog input traces.
Evaluate the microphone bias network against the selected capsule’s voltage and current requirements. Keep the analog input path short, avoid sharing return-current paths with digital switching activity, and use the manufacturer’s input-bias and common-mode recommendations. This is particularly important when ALC and programmable gain can raise the signal level toward the converter’s allowed input range.
Do not treat the 50 kSPS maximum as a general-purpose high-bandwidth audio converter. Confirm that the target signal fits the 5 kSPS-to-50 kSPS operating range and validate ALC, notch-filter, and sound-effect settings with representative recordings. For a different supply suffix, also verify reel orientation, moisture handling, and the final manufacturer part number.
Informações de conformidade
The exact-MPN RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available manufacturer or distributor records. AEC-Q100 qualification was not indicated for this industrial-market PCM1870 variant.