PCM1870RHFT - 16-Bit 50kHz Stereo ADC | Texas Instruments
N.º da peça: PCM1870RHFT ✓ AtivoPCM1870RHFT Visão geral
An audio ADC is a mixed-signal integrated circuit that converts left and right analog audio signals into digital sample data. Within the signal-chain hierarchy, an ADC follows the analog input and amplification stages and precedes a digital processor, audio codec, or storage system. The PCM1870 combines those front-end functions with delta-sigma conversion, allowing a microphone or line-level source to feed a compact digital audio design.
The 16-bit resolution represents 65,536 discrete amplitude levels, while the selectable conversion rate covers voice-band through 50kHz audio. Supported digital formats include right-justified, left-justified, I2S, and DSP data. I2C and SPI interfaces provide alternatives for systems where one or two control lines are preferable to a parallel bus. The integrated microphone amplifier and bias output reduce the number of external components required in microphone-oriented products.
Its stereo architecture supports single-ended and differential input arrangements, while programmable gain and automatic level control simplify level management across different speaking or listening distances. The integrated boost and line-input amplifiers can reduce the external analog front-end burden, although the final gain, bandwidth, and headroom must be evaluated against the selected microphone and source impedance. For battery-powered equipment, low-power operation remains central to the converter's portable-audio positioning.
Typical uses include portable recorders, digital microphones, USB audio interfaces, headset electronics, sound-field monitoring, and embedded voice-capture systems. A design can route a microphone through the bias and preamplifier section, apply programmable gain and automatic level control, then transmit the resulting PCM samples through I2C or SPI. A line-level implementation can instead use the line-input and boost stages while preserving a path for calibrated source signals.
PCB implementation should keep analog input traces away from digital clock and serial-data traces, place the required bypass capacitors close to their supply pins, and follow the exposed-pad thermal and layout guidance in the manufacturer datasheet. Verify the selected clock configuration, digital interface voltage, input filter, and gain settings against the target sampling rate before releasing the PCB.
This product page combines the exact PCM1870RHFT package and interface specifications with practical application guidance, drop-in family references, comparison parameters, and design considerations. It is intended to help engineers identify the correct suffix, plan a compact analog front end, and evaluate whether the integrated microphone and line-input functions simplify the target audio design.
Alternativas drop-in para PCM1870RHFT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PCM1870RHFT (mesmo formato e footprint) — diferindo em Converter Type, Input Type, Mounting Type, Package.
PCM1870RHFR
✅ Drop-InConsulte o preço
Ver ficha técnica →PCM1870RHFTG4
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PCM1870RHFRG4
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PCM1870RHFT Classificações máximas e características elétricas
| Converter Type | Delta-sigma stereo audio ADC |
| Resolução | 16 bit |
| Sampling Rate Range | 5kHz to 50kHz |
| Maximum Sampling Rate | 50kHz |
| Minimum Sampling Rate | 5kHz |
| Channel Configuration | Stereo |
| Supported Digital Interfaces | I2C and SPI |
| Supported Data Formats | Right-justified, left-justified, I2S, and DSP |
| Input Type | Single-ended and differential |
| Integrated Input Stages | Line-input amplifier, boost amplifier, microphone amplifier, and programmable gain control |
| Microphone Support | Integrated microphone bias and microphone amplifier |
| Level Control | Automatic level control (ALC) |
| Sound Processing | Integrated sound-effects support |
| Encapsulamento | 24-VQFN, 5mm x 4mm |
| Number of Terminals | 24 terminal |
| Tipo de montagem | No-lead surface mount |
| Temperature Grade | Industrial |
Guia de Configuração de Pinos do PCM1870RHFT 24-vqfn, 5mm x 4mm
Configuração de pinos para PCM1870RHFT (pacote 24-vqfn, 5mm x 4mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para PCM1870RHFT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PCM1870RHFT é adequado para 6 aplicaçãos: Portable Digital Voice Recorder, USB Audio Interface, Digital Microphone Module, Wireless Headset Audio Capture, Sound Field Monitoring System, Industrial Voice Sensor Interface.
Portable Digital Voice Recorder
The PCM1870RHFT fits portable recorders because it combines 16-bit stereo conversion, programmable gain, automatic level control, microphone amplification, and microphone bias in one 24-VQFN device. A microphone can be connected through the integrated front end, while digital samples are transferred through I2C or SPI to a microcontroller. Supporting conversion rates from 5kHz to 50kHz allow the design to select an appropriate rate for voice or wider-band recording. The principal design consideration is matching microphone impedance, bias requirements, and gain settings while controlling analog input noise.
Recomendado
USB Audio Interface
A USB audio interface can use the PCM1870RHFT to convert stereo analog line inputs into digital audio samples at 16-bit resolution and rates up to 50kHz. The integrated line-input and boost stages can simplify the input path, while I2C or SPI permits control by a USB controller. The interface remains compact because the converter occupies a 5mm-by-4mm VQFN package. Designers should separate input routing from headphone or power-amplifier outputs, verify the required clocking, and evaluate grounding carefully to prevent digital-interface coupling from degrading full-scale audio performance.
Recomendado
Digital Microphone Module
The PCM1870RHFT is suitable for digital microphone modules that need bias, preamplification, gain control, and conversion in a compact assembly. Its microphone amplifier and bias output can reduce the number of discrete front-end components, while automatic level control helps maintain usable signal amplitude. I2C is attractive for constrained embedded systems, although SPI is available when throughput or host-interface requirements favor it. The module designer must confirm the transducer's bias-voltage tolerance and operating current before enabling the bias output and must preserve the analog ground path from microphone to converter.
Recomendado
Wireless Headset Audio Capture
In a wireless headset, the PCM1870RHFT can capture microphone audio with 16-bit resolution while keeping the analog and digital circuitry compact. Its low-power design target supports portable equipment, and the selectable serial interfaces allow connection to a headset codec, digital radio, or application processor. Automatic level control can reduce manual gain changes, while the integrated microphone amplifier avoids a separate preamp in space-constrained designs. RF and switching circuitry should remain physically separated from the analog input, with the converter's ground and supply layout following the manufacturer recommendations.
Recomendado
Sound Field Monitoring System
The PCM1870RHFT supports compact stereo monitoring systems that need both microphone bias and line-level capture. A two-microphone arrangement can use the stereo converter for 16-bit digital samples, while line inputs broaden compatibility with instrument, preamp, or mixer outputs. Sampling rates from 5kHz to 50kHz accommodate slow environmental monitoring as well as higher-bandwidth acoustic capture. Designers should select the appropriate input mode and gain, check clipping at the intended source level, and reserve filtering for anti-aliasing and unwanted microphone noise.
Recomendado
Industrial Voice Sensor Interface
The PCM1870RHFT can serve as the audio-capture element in a compact industrial voice sensor that captures local speech or acoustic events. Its microphone amplifier, programmable gain, and automatic level control support changing signal levels, while the 24-VQFN package limits board area. The converter's industrial temperature-grade classification is identified for the RHFT order code. System integrators should still validate the full signal chain across temperature, verify electromagnetic conditions at the installation site, and use filtering appropriate for the target speech bandwidth.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PCM1870RHFT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PCM1870RHFR | PCM1870RHFTG4 | PCM1870RHFRG4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | VQFN-24 (5x4) | VQFN-24 (5x4) | VQFN-24 (5x4) | VQFN-24 (5x4) |
| Converter Type | Low-power stereo delta-sigma audio ADC | PCM1870 stereo audio ADC | PCM1870 stereo audio ADC | PCM1870 stereo audio ADC |
| Number of Terminals | 24 terminal | 24 terminal | 24 terminal | 24 terminal |
| Mounting Style | No-lead surface mount | Surface mount | Surface mount | Surface mount |
Principais diferenciais
- Integrated microphone and line-input front end (vs PCM1870RHFR)
- Selectable digital communication paths (vs PCM1870RHFTG4)
- Broad conversion-rate range for portable audio (vs PCM1870RHFRG4)
Notas de projeto
Route the left and right analog inputs as short, matched traces away from the I2C or SPI connections, system clock, and switching-power circuitry. Place input filtering and bypass components near the corresponding PCM1870RHFT pins. The 24-VQFN footprint requires careful thermal-pad layout and adequate copper area, so follow the land pattern and exposed-pad instructions in the manufacturer package drawing.
Use a clean, low-jitter clock because converter timing errors can appear as distortion or degraded channel-to-channel behavior. Keep digital interface traces away from the microphone and line inputs, and provide a low-impedance return path for the converter ground. When I2C is selected, check pull-up sizing and bus capacitance against the operating speed; when SPI is selected, account for host clock timing and signal polarity in the firmware.
Confirm the analog input range, programmable gain settings, microphone-bias level, and clock configuration before applying audio signals. Do not assume that identical package outlines prove that every ordering suffix is interchangeable. For PCM1870RHFT substitutions, verify pin names, supply requirements, reset behavior, serial format, and ALC configuration in the current manufacturer documentation, then review the assembled board for clipping and unwanted noise.
Decouple each supply connection with the capacitance and placement required by the manufacturer datasheet, and route the exposed thermal pad to a suitable copper plane. The ADC's low-power positioning does not eliminate analog supply-noise sensitivity: regulator ripple and digital switching can modulate the microphone or line input. Validate the power rails at the converter pins and compare the resulting noise floor with the required microphone signal level.
Informações de conformidade
The RHFT order code is identified as industrial temperature grade. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.