PIC24EP32GP202-I/SP - 60MHz 16-Bit MCU | Microchip
N.º da peça: PIC24EP32GP202-I/SP ✓ AtivoPIC24EP32GP202-I/SP Visão geral
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one component. The PIC24E family belongs to the broader embedded-controller hierarchy: microcontroller → 16-bit embedded controller → general-purpose MCU. This combination makes the device suitable for industrial control, signal conditioning, data acquisition, and embedded products that need deterministic control without adding separate analog components.
Key resources include 32 KB Flash organized as 10.7K × 24 words, 4 KB of RAM, and a maximum listed frequency of 60 MHz for the -I/SP ordering code. The 70 MIPS architecture supports efficient control-loop execution, while CTMU, internal op amps, comparators, and the Peripheral Trigger Generator can reduce external component count. A 28-pin SPDIP package also supports prototyping, through-hole assembly, and designs that prefer socketed or easily inspected packages.
The MCU operates from a 3.0 V to 3.6 V supply, as described for the PIC24EP family. Its integrated analog functions allow measurement and control signals to remain close to the processing core, reducing board area and helping simplify signal paths. The Peripheral Trigger Generator can coordinate deterministic peripheral events, while CTMU provides a charge-based measurement resource for touch, timing, and analog sensing applications.
Typical uses include industrial sensor controllers, motor and power-system monitoring, laboratory measurement equipment, building-control modules, and compact embedded instruments. The internal op amps are particularly useful when conditioning low-level analog signals before conversion or comparison, while comparators support threshold detection and protection functions.
PCB design should preserve clean separation between analog and digital return paths, place decoupling capacitors close to the supply pins, and route high-impedance sensor signals away from switching nodes. Firmware and peripheral assignments should also be checked against the exact 28-pin pinout before a drop-in substitution is approved.
This page combines the manufacturer family capabilities, exact ordering-code information, practical design guidance, and drop-in alternatives for engineers evaluating the PIC24EP32GP202-I/SP as the core of a new embedded-control design.
Alternativas drop-in para PIC24EP32GP202-I/SP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24EP32GP202-I/SP (mesmo formato e footprint) — diferindo em Package, ADC, Comparators, Integrated Comparators, Integrated Op Amps.
PIC24EP32GP202-E/SP
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC24EP32GP204-I/SP
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC24EP32GP205-I/SP
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC24EP32GP206-I/SP
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC24EP32GP204-E/SP
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC24EP32GP202-I/SP Classificações máximas e características elétricas
| Microcontroller Type | 16-bit general-purpose MCU |
| Product Family | PIC24E |
| Maximum CPU Frequency | 60 MHz |
| Architecture Performance | 70 MIPS |
| Program Memory | 32 KB Flash (10.7K × 24 words) |
| Data Memory | 4 KB RAM |
| Tensão de alimentação de operação | 3.0 V to 3.6 V |
| Encapsulamento | 28-pin SPDIP |
| Package Type | Through-hole SPDIP |
| Contagem de pinos | 28 pins |
| Integrated Op Amps | Yes |
| Integrated Comparators | Yes |
| CTMU | Yes |
| Peripheral Trigger Generator | Yes |
| Industrial Temperature Grade | Yes, -I ordering code |
| Extended Temperature Option | Available with -E ordering code |
Guia de Configuração de Pinos do PIC24EP32GP202-I/SP through-hole spdip
Configuração de pinos para PIC24EP32GP202-I/SP (pacote through-hole spdip). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC24EP32GP202-I/SP.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC24EP32GP202-I/SP é adequado para 6 aplicaçãos: Industrial Sensor Conditioning, Motor and Power-System Monitoring, Laboratory Measurement Equipment, Building Control and Automation, Data Acquisition and Embedded Logging, User Interfaces and Touch Sensing.
Industrial Sensor Conditioning
The PIC24EP32GP202-I/SP fits sensor-conditioning modules that require measurement and control in one 28-pin package. Its integrated op amps can amplify low-level sensor signals, while the comparators support fast threshold detection and the 16-bit core can execute control logic at up to 60 MHz. The 32 KB Flash provides room for calibration, filtering, diagnostics, and communication routines, while 4 KB of RAM supports working buffers. Place analog inputs away from switching traces, use the manufacturer’s decoupling recommendations, and verify the complete 28-pin multiplexed assignment before production release.
Recomendado
Motor and Power-System Monitoring
The PIC24EP32GP202-I/SP is appropriate for compact motor-control and power-monitoring modules where response speed and integrated analog functions are valuable. The 70 MIPS PIC24E architecture supports time-sensitive control and protection routines, while integrated comparators can monitor threshold events without separate comparator ICs. Its 60 MHz operating frequency provides computational headroom for filtering and diagnostics, and the 32 KB Flash accommodates state-machine and protection logic. Validate current ratings, input filtering, fault-response timing, and thermal margins against the manufacturer electrical limits before connecting external power stages.
Recomendado
Laboratory Measurement Equipment
The PIC24EP32GP202-I/SP can serve as the control core for compact laboratory instruments because it combines a 60 MHz processor, 32 KB Flash, 4 KB RAM, op amps, comparators, and CTMU in one package. The internal analog resources can condition and compare measured signals, while the processor performs calibration, data processing, and user-interface handling. The 28-pin SPDIP format is also convenient for prototypes and educational platforms. Design analog return paths carefully, include input protection appropriate to the measured source, and verify CTMU and op-amp operating conditions from the manufacturer datasheet.
Recomendado
Building Control and Automation
The PIC24EP32GP202-I/SP is suited to distributed building-control modules that monitor inputs and operate local actuators. Its integrated comparators support threshold-based events, CTMU supports charge-based sensing approaches, and the 32 KB Flash is adequate for protocols, configuration, and diagnostics. The 60 MHz processor leaves capacity for debouncing, filtering, scheduling, and communications while the 28-pin SPDIP package simplifies through-hole assembly. Validate available I/O after peripheral multiplexing, use the appropriate communications peripheral at its supported voltage and speed, and isolate long field wiring from sensitive analog routing.
Recomendado
Data Acquisition and Embedded Logging
The PIC24EP32GP202-I/SP can form the core of a compact data-acquisition node that combines analog conditioning, threshold monitoring, and local data handling. The integrated op amps and comparators reduce the number of external signal-chain components, while the 16-bit processor supports acquisition sequencing and calculations at up to 60 MHz. With 32 KB Flash and 4 KB RAM, the device can store firmware, calibration constants, and short working buffers. For longer records, connect an external storage interface within the device’s pin budget and apply the manufacturer’s clocking and layout guidance to preserve measurement accuracy.
Recomendado
User Interfaces and Touch Sensing
The PIC24EP32GP202-I/SP is useful for compact control panels and touch-sensing modules because CTMU, comparators, and a high-performance PIC24E core support charge measurement and responsive UI processing. The 60 MHz operating frequency allows the firmware to scan inputs while maintaining display, communications, and debounce routines, and the 28-pin package provides a straightforward development platform. Confirm CTMU timing, channel availability, and acquisition requirements in the manufacturer datasheet, provide adequate filtering on external electrodes, and validate EMC performance with the final enclosure and wiring configuration.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24EP32GP202-I/SP — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24EP32GP202-E/SP | PIC24EP32GP204-I/SP | PIC24EP32GP205-I/SP | PIC24EP32GP206-I/SP |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| Maximum CPU Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Program Memory | 32 KB Flash | 32 KB Flash | 32 KB Flash | 32 KB Flash | 32 KB Flash |
| Data Memory | 4 KB RAM | 4 KB RAM | 4 KB RAM | 4 KB RAM | 4 KB RAM |
| CPU Architecture | 16-bit PIC24E core | 16-bit PIC24E core | 16-bit PIC24E core | 16-bit PIC24E core | 16-bit PIC24E core |
| Temperature Grade | Industrial -I grade | Extended -E grade with 125°C option | Industrial -I grade | Industrial -I grade | Industrial -I grade |
| Integrated Analog Resources | Op amps, comparators, CTMU, and Peripheral Trigger Generator | Op amps, comparators, CTMU, and Peripheral Trigger Generator | Family analog resources with device-specific channel allocation | Family analog resources with device-specific channel allocation | Family analog resources with device-specific channel allocation |
| Operating Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
Principais diferenciais
- Combines digital control and multiple analog functions in one MCU (vs PIC24EP32GP202-E/SP)
- Direct industrial ordering option (vs PIC24EP32GP202-E/SP)
- 60 MHz operation with a 70 MIPS-class architecture (vs PIC24EP32GP204-I/SP)
- Integration reduces external analog component count (vs PIC24EP32GP206-I/SP)
Notas de projeto
Place the required supply-decoupling capacitors directly beside the corresponding VDD and VSS pins, and keep their ground returns short and continuous. Route sensitive analog inputs away from clock, PWM, switching-node, and high-current return paths. Because the 28-pin package multiplexes several analog and digital functions, create the PCB footprint from the exact GP202 pin-description table rather than from another PIC24EP family member.
Use a single low-impedance ground strategy, with analog returns joined according to the manufacturer layout recommendations. High-impedance CTMU, op-amp, and comparator inputs should have short traces and be guarded against leakage from nearby digital signals. If the design accepts external sensor signals, include series resistance or filtering where needed and verify settling time against the selected analog peripheral’s acquisition requirements.
Do not assume that identical 28-pin SPDIP packages guarantee identical peripheral behavior. Before substituting a GP204, GP205, or GP206 device, compare pin names, analog-channel assignments, comparator outputs, CTMU channels, timer connections, and programming pins. Also distinguish the -I industrial ordering code from the -E extended-temperature option because the permissible ambient range changes even when the electrical core and package remain aligned.
The -I/SP target is intended for industrial operation, while the -E/SP alternative supports an extended 125°C option. Estimate junction temperature from the selected operating ambient, package dissipation, and board thermal resistance, then confirm the result against the manufacturer’s maximum junction-temperature and operating-temperature limits. Through-hole construction improves heat transfer through the PCB, but copper area and enclosure airflow still determine steady-state performance.
Informações de conformidade
The -I/SP ordering code identifies an industrial-temperature MCU, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. The target is not presented as an automotive-qualified AEC-Q100 device.