Microchip Technology

PIC24EP32GP202-I/SP - 60MHz 16-Bit MCU | Microchip

부품 번호: PIC24EP32GP202-I/SP ✓ 활성
3.0 V to 3.6 V Vdss 28-pin SPDIP Package 60 MHz Speed 32 KB Flash (10.7K × 24 words) Memory
MOQ: 1 |

PIC24EP32GP202-I/SP 개요

Microchip Technology PIC24EP32GP202-I/SP is a 16-bit PIC24E general-purpose microcontroller with 32 KB of program Flash memory, 4 KB of SRAM, a 60 MHz operating frequency, and a 28-pin SPDIP package. The family combines a high-speed CPU with integrated analog peripherals, including op amps, comparators, CTMU, and a Peripheral Trigger Generator.

A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one component. The PIC24E family belongs to the broader embedded-controller hierarchy: microcontroller → 16-bit embedded controller → general-purpose MCU. This combination makes the device suitable for industrial control, signal conditioning, data acquisition, and embedded products that need deterministic control without adding separate analog components.

Key resources include 32 KB Flash organized as 10.7K × 24 words, 4 KB of RAM, and a maximum listed frequency of 60 MHz for the -I/SP ordering code. The 70 MIPS architecture supports efficient control-loop execution, while CTMU, internal op amps, comparators, and the Peripheral Trigger Generator can reduce external component count. A 28-pin SPDIP package also supports prototyping, through-hole assembly, and designs that prefer socketed or easily inspected packages.

The MCU operates from a 3.0 V to 3.6 V supply, as described for the PIC24EP family. Its integrated analog functions allow measurement and control signals to remain close to the processing core, reducing board area and helping simplify signal paths. The Peripheral Trigger Generator can coordinate deterministic peripheral events, while CTMU provides a charge-based measurement resource for touch, timing, and analog sensing applications.

Typical uses include industrial sensor controllers, motor and power-system monitoring, laboratory measurement equipment, building-control modules, and compact embedded instruments. The internal op amps are particularly useful when conditioning low-level analog signals before conversion or comparison, while comparators support threshold detection and protection functions.

PCB design should preserve clean separation between analog and digital return paths, place decoupling capacitors close to the supply pins, and route high-impedance sensor signals away from switching nodes. Firmware and peripheral assignments should also be checked against the exact 28-pin pinout before a drop-in substitution is approved.

This page combines the manufacturer family capabilities, exact ordering-code information, practical design guidance, and drop-in alternatives for engineers evaluating the PIC24EP32GP202-I/SP as the core of a new embedded-control design.

드롭인 대체품: PIC24EP32GP202-I/SP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC24EP32GP202-I/SP (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Comparators, Integrated Comparators, Integrated Op Amps.

Microchip Technology
Integrated Comparators: Present
Integrated Op Amps: Present
Microchip Technology
Package: 28-pin SPDIP (0.300", 7.62 mm)
ADC: 10/12-bit, multi-channel
Comparators: 3 on-chip analog comparators
Microchip Technology
Package: 28-pin SPDIP (Skinny Plastic DIP, SP)
ADC: 12-bit, up to 500 ksps, 16 channels
Comparators: 4

PIC24EP32GP202-E/SP

✅ 드롭인
Microchip Technology
📦 28-pin SPDIP
16-bit general-purpose microcontroller · 60 MIPS · 32 KB (10.7K x 24 words) · 4 KB · 16-bit · Present · Present · Present

가격 문의

데이터시트 보기 →

PIC24EP32GP204-I/SP

✅ 드롭인 ⚠️ 사양 미검증
📦 28-pin SPDIP
Device-specific peripheral configuration may differ; Flash, RAM, and CPU performance remain in the same family range, subject to final pin-table verification

📋 참조 대체품 (카탈로그에 없음)

PIC24EP32GP205-I/SP

✅ 드롭인 ⚠️ 사양 미검증
📦 28-pin SPDIP
Device-specific peripheral configuration may differ from the GP202; core memory size and operating class remain closely matched, subject to final pin-table verification

📋 참조 대체품 (카탈로그에 없음)

PIC24EP32GP206-I/SP

✅ 드롭인 ⚠️ 사양 미검증
📦 28-pin SPDIP
Device-specific peripheral configuration may differ from the GP202; core memory size and operating class remain closely matched, subject to final pin-table verification

📋 참조 대체품 (카탈로그에 없음)

PIC24EP32GP204-E/SP

✅ 드롭인 ⚠️ 사양 미검증
📦 28-pin SPDIP
Extended -E temperature grade replaces the industrial -I grade, while the family memory and performance class remain closely matched; peripheral configuration requires verification

📋 참조 대체품 (카탈로그에 없음)

PIC24EP32GP202-I/SP 최대 정격 & 전기적 특성

Microcontroller Type 16-bit general-purpose MCU
Product Family PIC24E
Maximum CPU Frequency 60 MHz
Architecture Performance 70 MIPS
Program Memory 32 KB Flash (10.7K × 24 words)
Data Memory 4 KB RAM
동작 공급 전압 3.0 V to 3.6 V
패키지 28-pin SPDIP
Package Type Through-hole SPDIP
핀 수 28 pins
Integrated Op Amps Yes
Integrated Comparators Yes
CTMU Yes
Peripheral Trigger Generator Yes
Industrial Temperature Grade Yes, -I ordering code
Extended Temperature Option Available with -E ordering code

PIC24EP32GP202-I/SP through-hole spdip 핀 구성 가이드

PIC24EP32GP202-I/SP(through-hole spdip 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

PIC24EP32GP202-I/SP의 through-hole spdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PIC24EP32GP202-I/SP.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PIC24EP32GP202-I/SP 적합 용도: 6 애플리케이션s: Industrial Sensor Conditioning, Motor and Power-System Monitoring, Laboratory Measurement Equipment, Building Control and Automation, Data Acquisition and Embedded Logging, User Interfaces and Touch Sensing.

🏭

Industrial Sensor Conditioning

The PIC24EP32GP202-I/SP fits sensor-conditioning modules that require measurement and control in one 28-pin package. Its integrated op amps can amplify low-level sensor signals, while the comparators support fast threshold detection and the 16-bit core can execute control logic at up to 60 MHz. The 32 KB Flash provides room for calibration, filtering, diagnostics, and communication routines, while 4 KB of RAM supports working buffers. Place analog inputs away from switching traces, use the manufacturer’s decoupling recommendations, and verify the complete 28-pin multiplexed assignment before production release.

⚡

Motor and Power-System Monitoring

The PIC24EP32GP202-I/SP is appropriate for compact motor-control and power-monitoring modules where response speed and integrated analog functions are valuable. The 70 MIPS PIC24E architecture supports time-sensitive control and protection routines, while integrated comparators can monitor threshold events without separate comparator ICs. Its 60 MHz operating frequency provides computational headroom for filtering and diagnostics, and the 32 KB Flash accommodates state-machine and protection logic. Validate current ratings, input filtering, fault-response timing, and thermal margins against the manufacturer electrical limits before connecting external power stages.

🔧

Laboratory Measurement Equipment

The PIC24EP32GP202-I/SP can serve as the control core for compact laboratory instruments because it combines a 60 MHz processor, 32 KB Flash, 4 KB RAM, op amps, comparators, and CTMU in one package. The internal analog resources can condition and compare measured signals, while the processor performs calibration, data processing, and user-interface handling. The 28-pin SPDIP format is also convenient for prototypes and educational platforms. Design analog return paths carefully, include input protection appropriate to the measured source, and verify CTMU and op-amp operating conditions from the manufacturer datasheet.

🏠

Building Control and Automation

The PIC24EP32GP202-I/SP is suited to distributed building-control modules that monitor inputs and operate local actuators. Its integrated comparators support threshold-based events, CTMU supports charge-based sensing approaches, and the 32 KB Flash is adequate for protocols, configuration, and diagnostics. The 60 MHz processor leaves capacity for debouncing, filtering, scheduling, and communications while the 28-pin SPDIP package simplifies through-hole assembly. Validate available I/O after peripheral multiplexing, use the appropriate communications peripheral at its supported voltage and speed, and isolate long field wiring from sensitive analog routing.

🖥️

Data Acquisition and Embedded Logging

The PIC24EP32GP202-I/SP can form the core of a compact data-acquisition node that combines analog conditioning, threshold monitoring, and local data handling. The integrated op amps and comparators reduce the number of external signal-chain components, while the 16-bit processor supports acquisition sequencing and calculations at up to 60 MHz. With 32 KB Flash and 4 KB RAM, the device can store firmware, calibration constants, and short working buffers. For longer records, connect an external storage interface within the device’s pin budget and apply the manufacturer’s clocking and layout guidance to preserve measurement accuracy.

🧩

User Interfaces and Touch Sensing

The PIC24EP32GP202-I/SP is useful for compact control panels and touch-sensing modules because CTMU, comparators, and a high-performance PIC24E core support charge measurement and responsive UI processing. The 60 MHz operating frequency allows the firmware to scan inputs while maintaining display, communications, and debounce routines, and the 28-pin package provides a straightforward development platform. Confirm CTMU timing, channel availability, and acquisition requirements in the manufacturer datasheet, provide adequate filtering on external electrodes, and validate EMC performance with the final enclosure and wiring configuration.

What are the key specifications of PIC24EP32GP202-I/SP that engineers should know?
The PIC24EP32GP202-I/SP is a 16-bit PIC24E general-purpose MCU with 32 KB of Flash, 4 KB of RAM, a 60 MHz operating frequency, and a 28-pin SPDIP package. According to the Microchip manufacturer datasheet and product page, the family also integrates op amps, comparators, CTMU, and a Peripheral Trigger Generator. The device operates from 3.0 V to 3.6 V and uses the industrial -I ordering designation.
What is the operating voltage of PIC24EP32GP202-I/SP?
The PIC24EP32GP202-I/SP operates from 3.0 V to 3.6 V according to the Microchip manufacturer documentation for the PIC24EP family. This supply range is suitable for conventional 3.3 V embedded systems. Decoupling and analog-reference design should follow the pin-specific recommendations in the manufacturer datasheet, and supply tolerance, sequencing, and brownout requirements must be checked for the complete system.
How much Flash and RAM does PIC24EP32GP202-I/SP have?
The PIC24EP32GP202-I/SP contains 32 KB of Flash program memory and 4 KB of SRAM. The Flash is identified by the distributor listing as 10.7K × 24 words, reflecting the 24-bit instruction-word organization used by the PIC24 architecture. According to the Microchip manufacturer datasheet, these resources support embedded control code, configuration storage, and working data for moderate peripheral complexity.
What is the maximum clock frequency of PIC24EP32GP202-I/SP?
The PIC24EP32GP202-I/SP is listed with a maximum operating frequency of 60 MHz. Microchip describes the PIC24E core as delivering 70 MIPS performance, reflecting instruction-level throughput rather than a different external clock rating. Firmware configuration, peripheral clocking, and timing calculations should use the 60 MHz device rating and the operating conditions in the manufacturer datasheet.
Which analog peripherals are integrated into PIC24EP32GP202-I/SP?
The PIC24EP32GP202-I/SP integrates op amps, comparators, CTMU, and a Peripheral Trigger Generator. According to the Microchip product page, these resources support signal conditioning, threshold detection, charge-based measurement, and coordinated peripheral triggering. They can reduce the need for external analog ICs, although each peripheral’s available channels, routing options, and electrical limits must be confirmed in the manufacturer pin-description table.
Where can I download the PIC24EP32GP202-I/SP datasheet PDF?
The official PIC24EP32GP202-I/SP documentation is available through Microchip’s product page at https://www.microchip.com/en-us/product/PIC24EP32GP202. Select the datasheet and user documentation resources for the PIC24EP32GP202 family. The 28-pin pinout, electrical limits, peripheral multiplexing, programming information, and package drawings should be taken from the revision applicable to the ordered device.
Where can I find the PIC24EP32GP202-I/SP pinout?
The authoritative pinout is shown in the Microchip manufacturer datasheet under the package and pin-description information for the 28-pin SPDIP. Use that table when assigning analog inputs, comparator channels, communication functions, timers, and programming signals because peripheral functions can be multiplexed onto shared pins. The PIC24EP32GP202-I/SP pinout should not be inferred solely from another package in the family.
What is the best drop-in replacement for PIC24EP32GP202-I/SP?
The closest identified drop-in replacement is the Microchip PIC24EP32GP202-E/SP because it retains the 28-pin SPDIP package, 32 KB Flash, 4 KB RAM, and 60 MHz frequency while changing the temperature grade. According to the Microchip ordering information, the -E version supports an extended 125°C option, whereas the -I/SP target is the industrial-grade version. Firmware and timing should still be revalidated for wider temperature operation.
Can PIC24EP32GP202-E/SP replace PIC24EP32GP202-I/SP?
Yes, the PIC24EP32GP202-E/SP is a drop-in candidate for the PIC24EP32GP202-I/SP because both use the 28-pin SPDIP package and retain 32 KB Flash, 4 KB RAM, and a 60 MHz operating frequency. The meaningful difference is temperature grade: the -E/SP variant is intended for extended-temperature operation, while the -I/SP target is the industrial ordering code. Review the manufacturer pin and electrical tables before production use.
PIC24EP32GP202-I/SP vs PIC24EP32GP202-E/SP — which is better for industrial equipment?
The PIC24EP32GP202-I/SP is generally the direct selection for standard industrial equipment because it is the industrial temperature-grade ordering option. The PIC24EP32GP202-E/SP provides an extended-temperature option up to 125°C and shares the 28-pin SPDIP footprint, 32 KB Flash, 4 KB RAM, and 60 MHz frequency. Both are viable drop-in choices when their temperature ratings and qualification requirements match the enclosure.
When should I choose PIC24EP32GP202-I/SP instead of another PIC24EP32GP202 option?
Choose the PIC24EP32GP202-I/SP when the design requires the industrial -I grade, a 28-pin through-hole SPDIP, 32 KB Flash, 4 KB RAM, and a 60 MHz maximum operating frequency. Select the -E/SP ordering code when the product requires the extended 125°C option. For other family members, compare Flash capacity, RAM, pin count, and peripheral mapping rather than assuming that the package alone guarantees compatibility.
Is PIC24EP32GP202-I/SP suitable for analog signal-conditioning and motor-control systems?
The PIC24EP32GP202-I/SP is suitable for compact signal-conditioning and motor-control systems because it combines a 70 MIPS PIC24E core with integrated op amps, comparators, CTMU, and a Peripheral Trigger Generator. The internal analog resources can reduce external component count, while the 60 MHz device frequency supports responsive control tasks. Validate channel routing, current limits, noise performance, and protection requirements in the application circuit.
Where to buy PIC24EP32GP202-I/SP online?
Use the “Request a Quote” form on this page to request PIC24EP32GP202-I/SP pricing, stock status, lead time, and package quantity. The exact ordering code is a 28-pin SPDIP industrial-grade MCU with 32 KB Flash and 4 KB RAM. Supply-chain confirmation should specify the full MPN, because similar -E/SP, package, or programmed-device listings do not represent the same ordering conditions.
What is the price of PIC24EP32GP202-I/SP?
Current pricing for PIC24EP32GP202-I/SP should be requested through the “Request a Quote” form on this page so the offer reflects the selected quantity and exact 28-pin SPDIP ordering code. The form can also confirm stock, minimum order quantity, and lead time. Quantity pricing can change with market availability, so a dated, fixed price should not be carried into a new design budget.
What is the lead time and stock status for PIC24EP32GP202-I/SP?
Request the current lead time and stock status for PIC24EP32GP202-I/SP using the “Request a Quote” form on this page. Lead time can vary with order quantity, procurement schedules, and the exact 28-pin SPDIP configuration. Confirm the full MPN on the quotation and distinguish the industrial -I/SP device from the extended-temperature -E/SP variant.
Is PIC24EP32GP202-I/SP in stock?
Stock for PIC24EP32GP202-I/SP should be confirmed through the “Request a Quote” form on this page. Include the required quantity and any date-sensitive production needs in the request. Because the exact suffix identifies an industrial-grade 28-pin SPDIP device, procurement should avoid substituting a different package, temperature grade, or programmed configuration without engineering approval.
What can replace PIC24EP32GP202-I/SP?
The PIC24EP32GP202-E/SP is the principal identified drop-in replacement because it preserves the 28-pin SPDIP package, 32 KB Flash, 4 KB RAM, and 60 MHz frequency. Its key difference is the extended-temperature option associated with the -E grade. Other PIC24EP32GP202 package or pin variants should not be treated as drop-in without comparing their pin descriptions, peripheral multiplexing, and electrical limits.

엔지니어링 참조 데이터: PIC24EP32GP202-I/SP — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PIC24EP32GP202-I/SP for a 28-pin industrial embedded-control design that requires 32 KB Flash, 4 KB RAM, a 60 MHz maximum operating frequency, and integrated op amps, comparators, CTMU, and Peripheral Trigger Generator. Select the PIC24EP32GP202-E/SP when the same electrical and package configuration is needed with the extended 125°C option. The GP204, GP205, and GP206-I/SP family alternatives can be considered when their device-specific peripheral mapping is confirmed against the target pinout. No cross-brand MCU was identified as a defensible drop-in match because pin assignments, programming interfaces, and peripheral resources are design-specific. Before substitution, compare the full package pin table, electrical limits, timing specifications, peripheral multiplexing, toolchain support, and qualification requirements.

대체품과의 비교

파라미터 이 제품 PIC24EP32GP202-E/SP PIC24EP32GP204-I/SP PIC24EP32GP205-I/SP PIC24EP32GP206-I/SP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP
Maximum CPU Frequency 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz
Program Memory 32 KB Flash 32 KB Flash 32 KB Flash 32 KB Flash 32 KB Flash
Data Memory 4 KB RAM 4 KB RAM 4 KB RAM 4 KB RAM 4 KB RAM
CPU Architecture 16-bit PIC24E core 16-bit PIC24E core 16-bit PIC24E core 16-bit PIC24E core 16-bit PIC24E core
Temperature Grade Industrial -I grade Extended -E grade with 125°C option Industrial -I grade Industrial -I grade Industrial -I grade
Integrated Analog Resources Op amps, comparators, CTMU, and Peripheral Trigger Generator Op amps, comparators, CTMU, and Peripheral Trigger Generator Family analog resources with device-specific channel allocation Family analog resources with device-specific channel allocation Family analog resources with device-specific channel allocation
Operating Supply Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V

주요 차별점

  • Combines digital control and multiple analog functions in one MCU (vs PIC24EP32GP202-E/SP)
  • Direct industrial ordering option (vs PIC24EP32GP202-E/SP)
  • 60 MHz operation with a 70 MIPS-class architecture (vs PIC24EP32GP204-I/SP)
  • Integration reduces external analog component count (vs PIC24EP32GP206-I/SP)

설계 노트

Place the required supply-decoupling capacitors directly beside the corresponding VDD and VSS pins, and keep their ground returns short and continuous. Route sensitive analog inputs away from clock, PWM, switching-node, and high-current return paths. Because the 28-pin package multiplexes several analog and digital functions, create the PCB footprint from the exact GP202 pin-description table rather than from another PIC24EP family member.

Use a single low-impedance ground strategy, with analog returns joined according to the manufacturer layout recommendations. High-impedance CTMU, op-amp, and comparator inputs should have short traces and be guarded against leakage from nearby digital signals. If the design accepts external sensor signals, include series resistance or filtering where needed and verify settling time against the selected analog peripheral’s acquisition requirements.

Do not assume that identical 28-pin SPDIP packages guarantee identical peripheral behavior. Before substituting a GP204, GP205, or GP206 device, compare pin names, analog-channel assignments, comparator outputs, CTMU channels, timer connections, and programming pins. Also distinguish the -I industrial ordering code from the -E extended-temperature option because the permissible ambient range changes even when the electrical core and package remain aligned.

The -I/SP target is intended for industrial operation, while the -E/SP alternative supports an extended 125°C option. Estimate junction temperature from the selected operating ambient, package dissipation, and board thermal resistance, then confirm the result against the manufacturer’s maximum junction-temperature and operating-temperature limits. Through-hole construction improves heat transfer through the PCB, but copper area and enclosure airflow still determine steady-state performance.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The -I/SP ordering code identifies an industrial-temperature MCU, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. The target is not presented as an automotive-qualified AEC-Q100 device.

관련 검색

PIC24EP32GP202-I/SP datasheet PIC24EP32GP202-I/SP pinout PIC24EP32GP202-I/SP specifications PIC24EP32GP202-I/SP equivalent PIC24EP32GP202-I/SP replacement PIC24EP32GP202-I/SP price PIC24EP32GP202-I/SP stock Microchip PIC24EP32GP202-I/SP PIC24EP32GP202 datasheet pdf PIC24EP32GP202 28 pin pinout PIC24EP32GP202-I/SP vs PIC24EP32GP202-E/SP PIC24EP32GP202-I/SP industrial application circuit PIC24EP32GP202-I/SP programming

관련 부품 & 용어

Microchip Technology PIC24EP32GP202-I/SP PIC24EP32GP202 PIC24EP32GP202-E/SP PIC24EP32GP204-I/SP PIC24EP32GP205-I/SP PIC24EP32GP206-I/SP PIC24E microcontroller 16-bit embedded controller general-purpose MCU semiconductor Flash memory static RAM CTMU Peripheral Trigger Generator integrated op amp comparator 28-pin SPDIP through-hole package industrial temperature grade 60 MHz 70 MIPS 3.0 V to 3.6 V
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기