PIC24EP32GP202-I/SP - 60MHz 16-Bit MCU | Microchip
MPN: PIC24EP32GP202-I/SP ✓ 啟用中PIC24EP32GP202-I/SP 概覽
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one component. The PIC24E family belongs to the broader embedded-controller hierarchy: microcontroller → 16-bit embedded controller → general-purpose MCU. This combination makes the device suitable for industrial control, signal conditioning, data acquisition, and embedded products that need deterministic control without adding separate analog components.
Key resources include 32 KB Flash organized as 10.7K × 24 words, 4 KB of RAM, and a maximum listed frequency of 60 MHz for the -I/SP ordering code. The 70 MIPS architecture supports efficient control-loop execution, while CTMU, internal op amps, comparators, and the Peripheral Trigger Generator can reduce external component count. A 28-pin SPDIP package also supports prototyping, through-hole assembly, and designs that prefer socketed or easily inspected packages.
The MCU operates from a 3.0 V to 3.6 V supply, as described for the PIC24EP family. Its integrated analog functions allow measurement and control signals to remain close to the processing core, reducing board area and helping simplify signal paths. The Peripheral Trigger Generator can coordinate deterministic peripheral events, while CTMU provides a charge-based measurement resource for touch, timing, and analog sensing applications.
Typical uses include industrial sensor controllers, motor and power-system monitoring, laboratory measurement equipment, building-control modules, and compact embedded instruments. The internal op amps are particularly useful when conditioning low-level analog signals before conversion or comparison, while comparators support threshold detection and protection functions.
PCB design should preserve clean separation between analog and digital return paths, place decoupling capacitors close to the supply pins, and route high-impedance sensor signals away from switching nodes. Firmware and peripheral assignments should also be checked against the exact 28-pin pinout before a drop-in substitution is approved.
This page combines the manufacturer family capabilities, exact ordering-code information, practical design guidance, and drop-in alternatives for engineers evaluating the PIC24EP32GP202-I/SP as the core of a new embedded-control design.
直接替換替代品,適用於 PIC24EP32GP202-I/SP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24EP32GP202-I/SP (相同外形與佔位) — 差異在於 Package, ADC, Comparators, Integrated Comparators, Integrated Op Amps.
PIC24EP32GP202-E/SP
✅ 直接替換聯絡詢價
查看資料表 →PIC24EP32GP204-I/SP
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24EP32GP205-I/SP
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24EP32GP206-I/SP
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24EP32GP204-E/SP
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24EP32GP202-I/SP 最大額定值與電氣特性
| Microcontroller Type | 16-bit general-purpose MCU |
| Product Family | PIC24E |
| Maximum CPU Frequency | 60 MHz |
| Architecture Performance | 70 MIPS |
| Program Memory | 32 KB Flash (10.7K × 24 words) |
| Data Memory | 4 KB RAM |
| 工作電源電壓 | 3.0 V to 3.6 V |
| 封裝 | 28-pin SPDIP |
| Package Type | Through-hole SPDIP |
| 腳位數 | 28 pins |
| Integrated Op Amps | Yes |
| Integrated Comparators | Yes |
| CTMU | Yes |
| Peripheral Trigger Generator | Yes |
| Industrial Temperature Grade | Yes, -I ordering code |
| Extended Temperature Option | Available with -E ordering code |
PIC24EP32GP202-I/SP through-hole spdip 腳位配置指南
PIC24EP32GP202-I/SP(through-hole spdip 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC24EP32GP202-I/SP.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24EP32GP202-I/SP 適用於 6 應用s: Industrial Sensor Conditioning, Motor and Power-System Monitoring, Laboratory Measurement Equipment, Building Control and Automation, Data Acquisition and Embedded Logging, User Interfaces and Touch Sensing.
Industrial Sensor Conditioning
The PIC24EP32GP202-I/SP fits sensor-conditioning modules that require measurement and control in one 28-pin package. Its integrated op amps can amplify low-level sensor signals, while the comparators support fast threshold detection and the 16-bit core can execute control logic at up to 60 MHz. The 32 KB Flash provides room for calibration, filtering, diagnostics, and communication routines, while 4 KB of RAM supports working buffers. Place analog inputs away from switching traces, use the manufacturer’s decoupling recommendations, and verify the complete 28-pin multiplexed assignment before production release.
推薦
Motor and Power-System Monitoring
The PIC24EP32GP202-I/SP is appropriate for compact motor-control and power-monitoring modules where response speed and integrated analog functions are valuable. The 70 MIPS PIC24E architecture supports time-sensitive control and protection routines, while integrated comparators can monitor threshold events without separate comparator ICs. Its 60 MHz operating frequency provides computational headroom for filtering and diagnostics, and the 32 KB Flash accommodates state-machine and protection logic. Validate current ratings, input filtering, fault-response timing, and thermal margins against the manufacturer electrical limits before connecting external power stages.
推薦
Laboratory Measurement Equipment
The PIC24EP32GP202-I/SP can serve as the control core for compact laboratory instruments because it combines a 60 MHz processor, 32 KB Flash, 4 KB RAM, op amps, comparators, and CTMU in one package. The internal analog resources can condition and compare measured signals, while the processor performs calibration, data processing, and user-interface handling. The 28-pin SPDIP format is also convenient for prototypes and educational platforms. Design analog return paths carefully, include input protection appropriate to the measured source, and verify CTMU and op-amp operating conditions from the manufacturer datasheet.
推薦
Building Control and Automation
The PIC24EP32GP202-I/SP is suited to distributed building-control modules that monitor inputs and operate local actuators. Its integrated comparators support threshold-based events, CTMU supports charge-based sensing approaches, and the 32 KB Flash is adequate for protocols, configuration, and diagnostics. The 60 MHz processor leaves capacity for debouncing, filtering, scheduling, and communications while the 28-pin SPDIP package simplifies through-hole assembly. Validate available I/O after peripheral multiplexing, use the appropriate communications peripheral at its supported voltage and speed, and isolate long field wiring from sensitive analog routing.
推薦
Data Acquisition and Embedded Logging
The PIC24EP32GP202-I/SP can form the core of a compact data-acquisition node that combines analog conditioning, threshold monitoring, and local data handling. The integrated op amps and comparators reduce the number of external signal-chain components, while the 16-bit processor supports acquisition sequencing and calculations at up to 60 MHz. With 32 KB Flash and 4 KB RAM, the device can store firmware, calibration constants, and short working buffers. For longer records, connect an external storage interface within the device’s pin budget and apply the manufacturer’s clocking and layout guidance to preserve measurement accuracy.
推薦
User Interfaces and Touch Sensing
The PIC24EP32GP202-I/SP is useful for compact control panels and touch-sensing modules because CTMU, comparators, and a high-performance PIC24E core support charge measurement and responsive UI processing. The 60 MHz operating frequency allows the firmware to scan inputs while maintaining display, communications, and debounce routines, and the 28-pin package provides a straightforward development platform. Confirm CTMU timing, channel availability, and acquisition requirements in the manufacturer datasheet, provide adequate filtering on external electrodes, and validate EMC performance with the final enclosure and wiring configuration.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24EP32GP202-I/SP — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24EP32GP202-E/SP | PIC24EP32GP204-I/SP | PIC24EP32GP205-I/SP | PIC24EP32GP206-I/SP |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| Maximum CPU Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Program Memory | 32 KB Flash | 32 KB Flash | 32 KB Flash | 32 KB Flash | 32 KB Flash |
| Data Memory | 4 KB RAM | 4 KB RAM | 4 KB RAM | 4 KB RAM | 4 KB RAM |
| CPU Architecture | 16-bit PIC24E core | 16-bit PIC24E core | 16-bit PIC24E core | 16-bit PIC24E core | 16-bit PIC24E core |
| Temperature Grade | Industrial -I grade | Extended -E grade with 125°C option | Industrial -I grade | Industrial -I grade | Industrial -I grade |
| Integrated Analog Resources | Op amps, comparators, CTMU, and Peripheral Trigger Generator | Op amps, comparators, CTMU, and Peripheral Trigger Generator | Family analog resources with device-specific channel allocation | Family analog resources with device-specific channel allocation | Family analog resources with device-specific channel allocation |
| Operating Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
主要差異化特點
- Combines digital control and multiple analog functions in one MCU (對比PIC24EP32GP202-E/SP)
- Direct industrial ordering option (對比PIC24EP32GP202-E/SP)
- 60 MHz operation with a 70 MIPS-class architecture (對比PIC24EP32GP204-I/SP)
- Integration reduces external analog component count (對比PIC24EP32GP206-I/SP)
設計說明
Place the required supply-decoupling capacitors directly beside the corresponding VDD and VSS pins, and keep their ground returns short and continuous. Route sensitive analog inputs away from clock, PWM, switching-node, and high-current return paths. Because the 28-pin package multiplexes several analog and digital functions, create the PCB footprint from the exact GP202 pin-description table rather than from another PIC24EP family member.
Use a single low-impedance ground strategy, with analog returns joined according to the manufacturer layout recommendations. High-impedance CTMU, op-amp, and comparator inputs should have short traces and be guarded against leakage from nearby digital signals. If the design accepts external sensor signals, include series resistance or filtering where needed and verify settling time against the selected analog peripheral’s acquisition requirements.
Do not assume that identical 28-pin SPDIP packages guarantee identical peripheral behavior. Before substituting a GP204, GP205, or GP206 device, compare pin names, analog-channel assignments, comparator outputs, CTMU channels, timer connections, and programming pins. Also distinguish the -I industrial ordering code from the -E extended-temperature option because the permissible ambient range changes even when the electrical core and package remain aligned.
The -I/SP target is intended for industrial operation, while the -E/SP alternative supports an extended 125°C option. Estimate junction temperature from the selected operating ambient, package dissipation, and board thermal resistance, then confirm the result against the manufacturer’s maximum junction-temperature and operating-temperature limits. Through-hole construction improves heat transfer through the PCB, but copper area and enclosure airflow still determine steady-state performance.
合規資訊
The -I/SP ordering code identifies an industrial-temperature MCU, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. The target is not presented as an automotive-qualified AEC-Q100 device.