PIC24FJ128GC006T-I/PT - 16-Bit 32MHz 128KB Flash MCU | Microchip
N.º da peça: PIC24FJ128GC006T-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $7.1 | $7,10 |
| 10 | $6.55 | $65,50 |
| 100 | $5.95 | $595,00 |
| 500 | $5.45 | $2.725,00 |
| 1.000 | $4.9 | $4.900,00 |
PIC24FJ128GC006T-I/PT Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC24F family uses a 16-bit modified Harvard architecture with a wide 24-bit instruction word, sitting above 8-bit PIC MCUs and below 32-bit ARM Cortex-M devices in performance, cost, and power hierarchy. The "XLP" (eXtreme Low Power) designation means this part targets battery-backed and energy-harvesting designs, complementing standard PIC24F parts.
Key differentiating features include a USB On-The-Go (OTG) full-speed peripheral for direct device/host connectivity without an external bridge, a segmented LCD driver supporting glass up to several hundred segments, and the dual-ADC architecture that lets the same MCU digitize both high-bandwidth signals (12-bit pipeline at 10 MSPS across 30 channels) and high-resolution low-frequency signals (16-bit Sigma-Delta) for weigh-scale, temperature, or strain-gauge front ends. The 2x on-chip op-amps further reduce external analog count.
Architecturally, the part leverages Microchip's standard PIC24F core with hardware multiplier, single-cycle MAC, and a 16-bit-wide datapath. Integrated Intelligent Analog reduces BOM by absorbing signal-chain functions that would otherwise need dedicated analog ICs, while 32 MHz operation gives ~16 MIPS throughput for signal processing and USB protocol stacks.
Typical applications include portable medical instrumentation (glucose meters, pulse oximeters), industrial sensor transmitters, USB-connected data loggers, and battery-powered metering. The wide analog integration makes it especially suitable where board space, BOM cost, and low quiescent current matter more than raw CPU horsepower.
When designing with this MCU, budget the I/O count against the 64-pin TQFP carefully - several pins are multiplexed with analog and LCD functions. Plan the PCB layout so the analog grounds are isolated from digital switching currents, especially with USB present.
This page synthesizes distributor pricing, verified same-family drop-in alternatives, and practical design notes not found on the manufacturer datasheet, giving engineers a single decision-ready reference.
Alternativas drop-in para PIC24FJ128GC006T-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24FJ128GC006T-I/PT (mesmo formato e footprint) — diferindo em Package, USB, Operating Temperature, ADC, LCD Controller.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC24FJ128GC006-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24FJ64GC006-I/PT
✅ Drop-In✓ Em estoque
$3.68 / unidade
Ver ficha técnica →PIC24FJ256GC006-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24FJ128GA006-I/PT
✅ Drop-In✓ Em estoque
$4.95 / unidade
Ver ficha técnica →PIC24FJ128GC006T-I/PT Classificações máximas e características elétricas
| Core Architecture | PIC 16-bit modified Harvard |
| Family | PIC24F XLP Intelligent Analog |
| Max CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 128 KB (43K x 24 words) |
| Data SRAM | 8 KB |
| Operating Voltage Range | 2.0 V to 3.6 V |
| 16-bit Sigma-Delta ADC | 2 differential channels |
| 12-bit Pipeline ADC | 10 MSPS, 30 channels |
| 10-bit DAC | 2 channels, 1 MSPS |
| On-chip Op-Amps | 2 |
| USB | USB On-The-Go (Full-Speed) |
| LCD Driver | Segmented LCD, up to 256 segments |
| Encapsulamento | 64-pin TQFP (PT) 10x10 mm |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40C to +85C (Industrial, "I") |
| Status RoHS | Compliant |
| Nível MSL | 3 (per JEDEC J-STD-020) |
| Lead-Free | Yes |
Guia de Configuração de Pinos do PIC24FJ128GC006T-I/PT 64-pin tqfp (pt) 10x10 mm
Configuração de pinos para PIC24FJ128GC006T-I/PT (pacote 64-pin tqfp (pt) 10x10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC24FJ128GC006T-I/PT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC24FJ128GC006T-I/PT é adequado para 7 aplicaçãos: Portable Medical Instrumentation, Industrial Sensor Transmitters, USB Data Loggers, Battery-Powered Metering, Handheld Test & Measurement, Audio Consumer Electronics, IoT Edge Sensor Nodes.
Portable Medical Instrumentation
The PIC24FJ128GC006T-I/PT is well suited for portable medical instruments such as glucose meters, pulse oximeters, and handheld diagnostic probes. Its 16-bit Sigma-Delta ADC supports high-accuracy biosensor readout at low sample rates, while the 12-bit 10 MSPS pipeline ADC captures pulse oximetry waveforms. The on-chip op-amps condition the photodiode transimpedance signal without an external analog front end, shrinking BOM. XLP low-power modes keep average quiescent current low between measurements, extending battery life on a single coin cell. The integrated segmented LCD driver directly drives status displays.
Recomendado
Industrial Sensor Transmitters
For 4-20 mA loop-powered sensor transmitters, the PIC24FJ128GC006T-I/PT's Intelligent Analog integration is decisive. The 16-bit Sigma-Delta ADC digitizes bridge-type sensors (load cells, strain gauges) directly with no external ADC, while the 12-bit 10 MSPS pipeline ADC handles process signals. USB OTG enables field calibration via a service-port connection without opening the enclosure. XLP modes help meet loop-power budgets, and the 64-pin TQFP exposes enough I/O to drive HART modems or local displays. Industrial temperature grade (-40C to +85C) matches process-plant environments.
Recomendado
USB Data Loggers
USB-connected portable data loggers benefit from the PIC24FJ128GC006T-I/PT's full-speed USB OTG peripheral with integrated transceiver - no external PHY or bridge IC is required, reducing BOM and PCB area. The 12-bit 10 MSPS pipeline ADC samples high-bandwidth signals (vibration, audio-bandwidth analog inputs) while 128 KB Flash stores boot loader, USB stack, and logger firmware. XLP sleep modes between acquisition windows preserve battery life across weeks of unattended logging. The segmented LCD shows real-time status without an external display controller.
Recomendado
Battery-Powered Metering
For utility metering (water, gas, electricity, heat), the PIC24FJ128GC006T-I/PT combines the segmented LCD driver (up to 256 segments - sufficient for multi-digit displays), Intelligent Analog for current/voltage sensing, and XLP low-power modes for multi-year battery life. The 16-bit Sigma-Delta ADC is ideal for low-frequency high-accuracy measurement typical of energy-meter front ends. USB OTG enables consumer-side readout via cable, and the industrial temperature range covers outdoor meter housings. The 64-pin TQFP supports keypad matrix and tamper-detection inputs in parallel.
Recomendado
Handheld Test & Measurement
Handheld multimeters and oscilloscope probes use the PIC24FJ128GC006T-I/PT for its combination of fast (10 MSPS, 12-bit) and precision (16-bit Sigma-Delta) ADC channels - one MCU digitizes both voltage/current readings and high-bandwidth waveforms. The on-chip op-amps condition the input divider network, and the USB OTG port streams data to a host application or charges the internal Li-ion cell with appropriate external charger. XLP modes extend operating time between charges, and the segmented LCD shows readings directly on the meter face.
Recomendado
Audio Consumer Electronics
Consumer audio accessories (USB headsets, USB DACs, audio interfaces) can leverage the PIC24FJ128GC006T-I/PT for its USB OTG, dual 10-bit 1 MSPS DACs, and on-chip op-amps - a minimal BOM for low-cost audio output stages. The 16-bit Sigma-Delta ADC handles microphone or line input capture. XLP sleep extends battery life in portable headphones between uses. While the DACs are 10-bit (not audiophile-grade), they are sufficient for consumer voice/notification tones and entry-level music playback when paired with external filtering.
Recomendado
IoT Edge Sensor Nodes
Edge sensor nodes deployed in industrial IoT can use the PIC24FJ128GC006T-I/PT as a local aggregation MCU that reads multiple sensors (temperature, pressure, flow) through the Intelligent Analog subsystem, performs local averaging and thresholding, and reports aggregated data upstream via USB OTG or a companion radio. XLP modes and 2.0-3.6 V operation support Li-ion / 2xAA battery power, while 128 KB Flash holds both application logic and a USB device stack. Industrial temperature grade handles factory-floor environments.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24FJ128GC006T-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24FJ128GC006-I/PT | PIC24FJ64GC006-I/PT | PIC24FJ256GC006-I/PT | PIC24FJ128GA006-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm |
| Core / Max Speed | PIC24F 16-bit / 32 MHz | PIC24F 16-bit / 32 MHz | PIC24F 16-bit / 32 MHz | PIC24F 16-bit / 32 MHz | PIC24F 16-bit / 32 MHz |
| Flash / SRAM | 128 KB / 8 KB | 128 KB / 8 KB | 64 KB / 8 KB | 256 KB / 8 KB | 128 KB / 8 KB |
| 16-bit Sigma-Delta ADC | Yes (2 ch) | Yes (2 ch) | Yes (2 ch) | Yes (2 ch) | No |
| 12-bit Pipeline ADC | 10 MSPS, 30 ch | 10 MSPS, 30 ch | 10 MSPS, 30 ch | 10 MSPS, 30 ch | 10-bit ADC, no pipeline |
| On-chip DAC / Op-amps | 2x 10-bit / 2 op-amps | 2x 10-bit / 2 op-amps | 2x 10-bit / 2 op-amps | 2x 10-bit / 2 op-amps | None / None |
| USB | USB OTG Full-Speed | USB OTG Full-Speed | USB OTG Full-Speed | USB OTG Full-Speed | USB OTG Full-Speed |
| LCD Driver | Segmented, up to 256 segments | Segmented, up to 256 segments | Segmented, up to 256 segments | Segmented, up to 256 segments | Segmented (varies) |
Principais diferenciais
- Intelligent Analog subsystem on a 16-bit PIC24F (vs PIC24FJ128GA006-I/PT)
- Higher Flash density in same TQFP-64 package (vs PIC24FJ64GC006-I/PT)
- Same Intelligent Analog at half the Flash cost (when 128 KB is not needed) (vs PIC24FJ256GC006-I/PT)
Notas de projeto
Design a clean analog supply: route AVDD through a ferrite bead from VDD with a dedicated 10uF + 0.1uF decoupling pair at each analog pin group. The PIC24FJ128GC006T-I/PT's 16-bit Sigma-Delta ADC achieves datasheet noise performance only when its analog supply is filtered from digital switching noise. AVDD must remain within 2.0-3.6 V per the family datasheet, and separate analog ground return paths should be used for the Sigma-Delta input traces.
Route USB D+/D- as a 90-ohm differential pair with matched lengths, and place the USB DP/DN series resistors close to the MCU. Provide a 4.7uF bulk capacitor on VBUS if the part powers from USB, and avoid running digital switching signals across the USB differential pair. For the 12-bit pipeline ADC running at 10 MSPS, keep analog traces short and guarded with ground to limit crosstalk from digital I/O.
Common pitfalls: (1) forgetting that PIC24F pins are NOT 5 V tolerant - exceeding VDD + 0.3 V on any I/O will damage the part; (2) selecting pin remapping that conflicts with analog or LCD functions on the same pin; (3) using the 12-bit pipeline ADC without first enabling its dedicated voltage reference; (4) configuring the USB peripheral without the 48 MHz USB clock source active; (5) neglecting the JTAG/ICSP pins (PGECx/PGEDx) which must be accessible for in-circuit programming in production. Always consult the family datasheet's pin tables before finalizing pinout.
Estimated: At industrial corner conditions (-40C ambient, 32 MHz full operation, USB + ADC active), the PIC24FJ128GC006T-I/PT typically dissipates around 60-90 mW. The TQFP-64 package's theta_JA is approximately 45 C/W on a standard JEDEC 4-layer test board, giving a junction-temperature rise of only 3-4 C above ambient - well within the +125 C maximum junction. No external heatsinking is required. However, in a sealed enclosure with poor airflow, derate by ensuring ambient stays below +85 C for the industrial grade part.
Informações de conformidade
RoHS compliant per Microchip product page. Not AEC-Q100 qualified (this is an industrial-grade MCU, not automotive). Halogen-free status not explicitly listed in verified data - left as unknown.
