PIC24FJ256DA106T-I/MR - 16-bit 32MHz 256KB Flash MCU | Microchip
N.º da peça: PIC24FJ256DA106T-I/MR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $9.2 | $9,20 |
| 10 | $8.46 | $84,60 |
| 100 | $7.55 | $755,00 |
| 500 | $6.78 | $3.390,00 |
| 1.000 | $6.05 | $6.050,00 |
PIC24FJ256DA106T-I/MR Visão geral
A 16-bit microcontroller (MCU) is a microprocessor integrating CPU core, memory, peripherals, and I/O on one chip; the PIC24F family uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction word, and a C-compiler-optimized instruction set. PIC24F devices sit in the 16-bit MCU hierarchy between 8-bit PIC10/12/16 and 32-bit PIC32, targeting low-power, moderate-performance embedded applications where 32-bit overhead is not justified. The 'FJ' suffix denotes Flash with enhanced peripherals, while 'DA' specifically identifies the integrated graphics controller and USB OTG controller. Designers select PIC24F for deterministic real-time performance, mature MPLAB X toolchain support, and a wide operating voltage range of 2.0V-3.6V.
Key features include 256 KB self-programmable Flash, 24 KB SRAM, USB 2.0 full-speed OTG, Parallel Master Port (PMP) for direct graphics interface, on-chip Charge Time Measurement Unit (CTMU) for touch sensing, Peripheral Pin Select (PPS) for flexible I/O mapping, 16-channel 10-bit ADC, five 16-bit timers, and three UART/SPI/I2C modules. The internal 8 MHz oscillator with 4x PLL provides flexible clock options without external crystals for many designs.
Typical applications include embedded color graphical displays (TFT-LCD), USB peripherals (HID, CDC, MSD), industrial control panels with touch sensing, low-cost medical devices, home appliance HMIs, and POS terminals. The wide memory and graphics capabilities make it suited to designs that previously required separate LCD controllers and external memory.
A key design consideration is the trade-off between integrated graphics versus a discrete graphics controller: the on-chip GPU reduces BOM cost but requires careful PMP timing configuration. Designers should also ensure decoupling per the datasheet's power-section guidelines to maintain USB signal integrity.
Alternativas drop-in para PIC24FJ256DA106T-I/MR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24FJ256DA106T-I/MR (mesmo formato e footprint) — diferindo em Graphics Controller, Package, USB, ADC, Program Memory (Flash).
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC24FJ256DA106-I/MR
✅ Drop-In✓ Em estoque
$6.25 / unidade
Ver ficha técnica →PIC24FJ128DA106-I/MR
✅ Drop-In✓ Em estoque
$2.4 / unidade
Ver ficha técnica →PIC24FJ256GA106-I/MR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24FJ256DA106-I/PT
✅ Drop-In✓ Em estoque
$5.46 / unidade
Ver ficha técnica →PIC24FJ256DA106T-I/MR Classificações máximas e características elétricas
| Core Architecture | PIC 16-bit modified Harvard |
| Family | PIC24F |
| CPU Core | 16-bit PIC |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 256 KB (85.5K x 24 bits) |
| RAM | 24 KB |
| Encapsulamento | 64-pin VQFN (9x9 mm) |
| Tipo de montagem | Surface Mount |
| Operating Voltage Range | 2.0 V to 3.6 V |
| Faixa de temperatura de operação | -40 C to +85 C (Industrial) |
| USB | USB 2.0 Full-Speed OTG |
| Graphics Controller | Integrated with Parallel Master Port (PMP) |
| ADC | 16-channel 10-bit |
| Timers | Five 16-bit |
| Communication Interfaces | 3x UART/SPI/I2C (selectable) |
| Peripheral Pin Select (PPS) | Yes |
| Internal Oscillator | 8 MHz with 4x PLL and multiple divide options |
| Hardware Multiplier/Divider | 17-bit x 16-bit single-cycle multiplier; 16-bit hardware divider |
| Touch Sensing | CTMU (Charge Time Measurement Unit) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Guia de Configuração de Pinos do PIC24FJ256DA106T-I/MR 64-pin vqfn (9x9 mm)
Configuração de pinos para PIC24FJ256DA106T-I/MR (pacote 64-pin vqfn (9x9 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC24FJ256DA106T-I/MR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC24FJ256DA106T-I/MR é adequado para 7 aplicaçãos: Embedded Color Graphics Display HMI, USB HID / CDC / MSD Peripherals, Industrial Control Panels with Touch Sensing, Low-Cost Medical Devices, Home Appliance HMI Displays, POS Terminals and Kiosk Controllers, Automotive Infotainment Auxiliary Displays.
Embedded Color Graphics Display HMI
The PIC24FJ256DA106T-I/MR's integrated graphics controller with Parallel Master Port (PMP) is engineered to drive TFT-LCD panels up to QVGA/WQVGA resolutions without an external LCD controller. Its 256 KB Flash holds the graphics library and application code, while 24 KB RAM provides sufficient frame-buffer space for small color displays. Designers place the MCU directly between an SPI/parallel display and the user-interface firmware, reducing BOM by $1-3 versus a discrete graphics controller solution. The 32 MHz CPU delivers 16 MIPS, adequate for animated menu rendering and touch-coordinate processing.
Recomendado
USB HID / CDC / MSD Peripherals
The PIC24FJ256DA106T-I/MR's integrated USB 2.0 full-speed OTG controller enables plug-and-play HID, CDC, and MSD device implementations without external PHY hardware. The 256 KB Flash holds the USB stack, class drivers, and application logic; the 48 MHz USB clock derives from the on-chip PLL, eliminating external crystal cost. USB signal integrity requires careful PCB layout per the datasheet's USB section, with 90-ohm differential impedance on D+/D- lines. Designers use this MCU in barcode scanners, custom input devices, and USB-to-UART bridges.
Recomendado
Industrial Control Panels with Touch Sensing
The PIC24FJ256DA106T-I/MR integrates a Charge Time Measurement Unit (CTMU) supporting up to 64 touch buttons without external touch ICs. Combined with the 16-channel 10-bit ADC and 5x 16-bit timers, this enables robust industrial HMI designs where mechanical switches would fail. The 2.0V-3.6V supply range tolerates industrial 24V bus-derived 3.3V rails with regulation. Designers combine CTMU touch sensing with the graphics controller for sealed touch-panel interfaces in factory equipment and process control.
Recomendado
Low-Cost Medical Devices
The PIC24FJ256DA106T-I/MR's deterministic 16 MIPS performance, integrated USB for PC connectivity, and 256 KB Flash for application code make it suited to low-cost medical peripherals such as glucose meters, pulse oximeters, and patient monitoring accessories. The industrial -40C to +85C temperature range covers most clinical environments. The Peripheral Pin Select (PPS) feature allows flexible I/O mapping for sensor interfaces, simplifying PCB routing in compact medical form factors.
Recomendado
Home Appliance HMI Displays
The PIC24FJ256DA106T-I/MR is well suited to home appliance user interfaces such as washing-machine control panels, microwave ovens, and smart thermostats. Its integrated graphics controller drives small TFT or OLED displays directly, while USB enables factory programming and firmware updates. The 256 KB Flash supports multilingual UI assets and complex state machines; 24 KB RAM handles UI frame buffers. The CTMU enables sealed capacitive touch panels that withstand kitchen moisture.
Recomendado
POS Terminals and Kiosk Controllers
The PIC24FJ256DA106T-I/MR supports POS terminal and kiosk controller designs requiring USB peripherals (card readers, printers, barcode scanners), graphical receipts or menu displays, and touch input. The integrated USB OTG enables host and device roles, simplifying dual-mode peripherals. The 16 MIPS CPU handles transaction state machines, encryption, and display updates concurrently. Designers leverage the 256 KB Flash for secure bootloaders and application firmware.
Recomendado
Automotive Infotainment Auxiliary Displays
The PIC24FJ256DA106T-I/MR can serve as an auxiliary display controller in non-safety-critical automotive HMI applications such as rear-seat entertainment, climate-control panels, and aftermarket accessory displays. Its industrial temperature grade (-40C to +85C) covers cabin environments. The integrated USB supports media playback from USB drives; the graphics controller drives small TFT panels. For safety-critical automotive applications, designers should migrate to AEC-Q100-qualified variants in the PIC24HJ or dsPIC33 families.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24FJ256DA106T-I/MR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24FJ256DA106-I/MR | PIC24FJ128DA106-I/MR | PIC24FJ256GA106-I/MR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | VQFN-64 (MR) 9x9 | VQFN-64 (MR) 9x9 - same | VQFN-64 (MR) 9x9 - same | VQFN-64 (MR) 9x9 - same |
| Core | PIC24F 16-bit, 32 MHz | PIC24F 16-bit, 32 MHz | PIC24F 16-bit, 32 MHz | PIC24F 16-bit, 32 MHz |
| Flash Memory | 256 KB | 256 KB | 128 KB (-50%) | 256 KB |
| RAM | 24 KB | 24 KB | 24 KB | 24 KB |
| Graphics Controller | Yes (integrated, with PMP) | Yes | Yes | No |
| USB | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Temperature Range | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Shipping Format | Tape & Reel | Tray | Tray | Tray |
Principais diferenciais
- Integrated on-chip graphics controller with Parallel Master Port (vs PIC24FJ256GA106-I/MR)
- 256 KB Flash doubles code-storage capacity versus -128 variant (vs PIC24FJ128DA106-I/MR)
- USB OTG plus integrated graphics in single 64-VQFN (vs Discrete USB MCU + external graphics controller)
Notas de projeto
The PIC24FJ256DA106T-I/MR requires a stable 2.0V-3.6V supply. Place a 10 uF bulk capacitor near the VDD pins and a 0.1 uF decoupling capacitor on each VDD/VSS pair as recommended in the Microchip datasheet power section. For USB applications, ensure VBUS tolerance is respected; do not connect 5V USB signals directly to 3.3V tolerant pins without level shifting or resistor dividers.
The 64-pin VQFN (9x9 mm) package has an exposed thermal pad that must be soldered to a ground copper pour for thermal dissipation and electrical performance. Use an array of thermal vias under the EP to connect to inner ground planes. Maintain 90-ohm differential impedance on USB D+/D- traces and keep them length-matched within 150 mil per the USB 2.0 specification.
Configuration bits must be programmed correctly to enable the PLL and select the right oscillator mode for USB operation (48 MHz). The Peripheral Pin Select (PPS) feature requires explicit remapping of peripheral functions to physical I/O pins in firmware - failing to do so leaves peripherals inactive even though registers appear correct. Always check the device configuration in MPLAB X after programming.
When driving TFT-LCD panels via the Parallel Master Port (PMP), keep PMP traces short and length-matched for the data bus. Place series resistors on PMP data lines near the MCU to dampen reflections. For high-pixel-clock rates, use 4-layer PCB with continuous ground plane beneath PMP traces to minimize crosstalk.
Informações de conformidade
RoHS and lead-free per Microchip product page. Industrial temperature grade (-40C to +85C). Not AEC-Q100 qualified - for automotive safety-critical applications migrate to AEC-Q100-qualified PIC24/dsPIC variants.
