PIC24FV16KM204-E/ML - 16-Bit XLP MCU, 16KB Flash, 32MHz | Microchip
N.º da peça: PIC24FV16KM204-E/ML ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $3.04 | $30,40 |
| 100 | $2.68 | $268,00 |
| 500 | $2.36 | $1.180,00 |
| 1.000 | $2.1 | $2.100,00 |
PIC24FV16KM204-E/ML Visão geral
What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, peripherals, and I/O. A 16-bit MCU walks the middle ground between 8-bit MCUs (cheap, simple) and 32-bit MCUs (high performance, complex), and is widely deployed in mixed-signal embedded designs where code density, ADC precision, and low power must coexist. The PIC24F sits in this niche, with the XLP variants pushing quiescent draw into the nanoamp range for battery-aware applications.
Key features of the PIC24FV16KM204 include integrated analog peripherals (12-bit ADC, 8-bit DAC, dual op-amps, comparators), Configurable Logic Cells (CLC) for hardware glue logic, Capture/Compare/PWM modules for motor and timing control, and multiple serial interfaces (UART, SPI, I2C). The device also offers a charge time measurement unit (CTMU) for capacitive touch sensing.
Architecturally, the PIC24F core uses a 16-bit modified Harvard architecture with a 24-bit instruction word, giving compact code density for C and assembly workloads. The on-chip voltage regulator accepts a wide input range and produces a stable internal 1.8V core supply, simplifying system power design. XLP technology provides sleep currents in the nanoamp range.
Typical applications include low-power IoT sensor nodes, portable medical monitoring, battery-powered metering, capacitive touch user interfaces, and mixed-signal industrial control. The wide voltage range makes it especially suited to products powered directly from USB, lithium cells, or unregulated 3.3V/5V rails.
When laying out a design, route the ICSP pair (PGECx/PGEDx) directly to a programming header with no series components, and provide 100n plus 10uF decoupling close to each VDD/AVDD pin. Select any of the multiple PGECx/PGEDx pairs to minimize board routing congestion.
This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes — engineering context not aggregated on a single datasheet page.
Alternativas drop-in para PIC24FV16KM204-E/ML — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24FV16KM204-E/ML (mesmo formato e footprint) — diferindo em Package, ADC, Maximum CPU Speed, Operating Temperature, Core.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC24FV16KM202-E/ML
✅ Drop-In✓ Em estoque
$1.95 / unidade
Ver ficha técnica →PIC24FV16KM204T-E/ML
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24FV16KM104-E/ML
✅ Drop-In✓ Em estoque
$3.18 / unidade
Ver ficha técnica →PIC24F16KM204-E/ML
✅ Drop-In✓ Em estoque
$2.65 / unidade
Ver ficha técnica →PIC24FV32KM204-E/ML
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24FV16KA302-E/ML
✅ Drop-In✓ Em estoque
$2.18 / unidade
Ver ficha técnica →PIC24FV16KM204-E/ML Classificações máximas e características elétricas
| Core Architecture | PIC24F (16-bit modified Harvard) |
| CPU Core | PIC® 16-bit MCU |
| Maximum CPU Speed | 32 MIPS / 32 MHz |
| Program Flash Memory | 16 KB (5.5K x 24) |
| SRAM | 2 KB |
| EEPROM | 512 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Supply Rails | VDD + AVDD + On-chip regulator |
| Configurable Logic Cells (CLC) | Yes |
| CCP Modules | Yes (Capture/Compare/PWM) |
| CTMU (Capacitive Touch) | Yes |
| XLP (eXtreme Low Power) | Yes |
| Temperatura de operação | -40C to +125C (Industrial, -E suffix) |
| Encapsulamento | 44-pin QFN EP (8x8 mm) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant (per DigiKey listing) |
Configuração de pinos do PIC24FV16KM204-E/ML
| Pino 1 | RP5/PMD5/ICSD7/RB5 — Remappable I/O / PWM / I/O analog / System bus |
| Pino 2 | RP6/PMD6/RB6 — Remappable I/O / PWM / I/O |
| Pino 3 | RP7/PMD7/RB7 — Remappable I/O / PWM / I/O |
| Pino 4 | RP8/SCL1/RC8 — Remappable I/O / I2C1 SCL |
| Pino 5 | RP9/SDA1/RC9 — Remappable I/O / I2C1 SDA |
| Pino 6 | VSS — Ground reference |
| Pino 7 | VCAP — External capacitor for internal LDO output |
| Pino 8 | PGED3/AN2A5/RP10/RC0 — ICSP data / ADC analog / I/O |
| Pino 9 | PGEC3/AN6A1/RP11/RC1 — ICSP clock / ADC analog / I/O |
| Pino 10 | AN0A0/RP0/PMD0/RB0 — ADC analog / I/O / PWM |
| Pino 11 | AN1A1/RP1/PMD1/RB1 — ADC analog / I/O / PWM |
| Pino 12 | AN2A2/RP2/PMD2/RB2 — ADC analog / I/O / PWM |
| Pino 13 | AN3A3/RP3/PMD3/RB3 — ADC analog / I/O / PWM |
| Pino 14 | AN4A4/RP4/PMD4/RB4 — ADC analog / I/O / PWM |
| Pino 15 | VSS — Ground reference |
| Pino 16 | VDD — Positive supply (1.8-5.5V) |
| Pino 17 | PGEC1/AN7A5/RP12/RC2 — ICSP clock / ADC analog / I/O |
| Pino 18 | PGED1/AN8A6/RP13/RC3 — ICSP data / ADC analog / I/O |
| Pino 19 | PGEC2/AN9A7/RP14/RC4 — ICSP clock / ADC analog / I/O |
| Pino 20 | PGED2/AN10A8/RP15/RC5 — ICSP data / ADC analog / I/O |
| Pino 21 | RA0 — General purpose I/O |
| Pino 22 | RA1 — General purpose I/O |
| Pino 23 | RA2 — General purpose I/O |
| Pino 24 | RA3 — General purpose I/O |
| Pino 25 | RA4 — General purpose I/O |
| Pino 26 | RA5 — General purpose I/O |
| Pino 27 | AVSS — Analog ground reference |
| Pino 28 | AVDD — Analog positive supply |
| Pino 29 | CVREF+/AN11/RP16/RC6 — Comparator Vref+ / ADC / I/O |
| Pino 30 | CVREF-/AN12/RP17/RC7 — Comparator Vref- / ADC / I/O |
| Pino 31 | DAC1/RP18/RC10 — DAC output / I/O |
| Pino 32 | OP1+/OPO1/AN13/RP19/RC11 — Op-amp 1 +input / output / ADC / I/O |
| Pino 33 | OP1-/AN14/RP20/RC12 — Op-amp 1 -input / ADC / I/O |
| Pino 34 | OP2+/OPO2/AN15/RP21/RC13 — Op-amp 2 +input / output / ADC / I/O |
| Pino 35 | OP2-/AN16/RP22/RC14 — Op-amp 2 -input / ADC / I/O |
| Pino 36 | RP23/RC15 — Remappable I/O |
| Pino 37 | OSCI/CLKI/RA6 — Crystal oscillator input / external clock |
| Pino 38 | OSCO/CLKO/RA7 — Crystal oscillator output |
| Pino 39 | MCLR/RP24/RC16 — Master clear reset (active-low) / I/O |
| Pino 40 | VSS — Ground reference |
| Pino 41 | VDD — Positive supply (1.8-5.5V) |
| Pino 42 | SOSCI/RP25/RC17 — Secondary oscillator input / I/O |
| Pino 43 | SOSCO/RP26/RC18 — Secondary oscillator output / I/O |
| Pino 44 | RTCC/RP27/RC19 — RTCC output / I/O |
Aplicações típicas
PIC24FV16KM204-E/ML é adequado para 6 aplicaçãos: Low-Power IoT Sensor Nodes, Portable Medical Monitoring Devices, Capacitive Touch User Interfaces, Battery-Powered Smart Metering, Industrial Sensor Hubs, Mixed-Signal Motor Control.
Low-Power IoT Sensor Nodes
The PIC24FV16KM204-E/ML's XLP technology delivers nanoamp sleep currents and integrated 12-bit ADC and CTMU, making it ideal for battery-powered IoT sensor nodes that wake periodically to measure and transmit. The 1.8-5.5V VDD range lets a single lithium cell or 2xAA pack power the entire node without a regulator. With 32 MIPS headroom for short protocol stacks (e.g., LoRaWAN, BLE HCI handoff), 16 KB Flash is ample. Compared with an 8-bit MCU, the 16-bit core reduces code size and improves sensor-fusion math performance.
Recomendado
Portable Medical Monitoring Devices
Medical wearables (pulse oximeters, glucose meters, single-lead ECG patches) demand low noise, low power, and integrated analog for signal conditioning. The PIC24FV16KM204-E/ML combines a 12-bit ADC, dual on-chip op-amps (front-end gain stage), and an 8-bit DAC (bias or stimulation control) in a single 44-QFN. The 'FV' 5V tolerance enables direct USB-powered charging without external level shifters, and XLP sleep keeps idle current near zero between patient measurements.
Recomendado
Capacitive Touch User Interfaces
The CTMU (Charge Time Measurement Unit) plus mTouch library lets the PIC24FV16KM204-E/ML drive multi-button and slider capacitive-touch interfaces without an external touch controller. The integrated CLC provides hardware debouncing and gesture pre-processing, offloading work from the CPU. Typical designs achieve 8-16 touch channels with <50 uA average current; combined with XLP sleep, the system can run for years on coin cells. The 32 MHz core executes touch scanning in microseconds.
Recomendado
Battery-Powered Smart Metering
Utility meters (water, gas, electric submeter) need 10+ year battery life and reliable metering computation. The PIC24FV16KM204-E/ML's XLP sleep plus 12-bit ADC sample-and-conversion fits low-duty-cycle metering cycles. The CCP modules drive metrology-grade timers, and EEPROM stores tamper events and calibration across power cycles. The 1.8-5.5V input accepts varied battery chemistries (LiSOCl2, alkaline), simplifying the BOM.
Recomendado
Industrial Sensor Hubs
Industrial 4-20 mA loop-powered sensors and RS-485 field nodes benefit from the PIC24FV16KM204-E/ML's 5V tolerance, dual op-amps (signal conditioning), and 12-bit ADC. The wide -40C to +125C industrial temperature rating covers factory environments. The CLC provides deterministic glue logic for protocol bridges (e.g., UART-to-LIN), reducing latency versus software bit-banging. UART/SPI/I2C peripherals support most industrial transceivers.
Recomendado
Mixed-Signal Motor Control
Small BLDC and stepper motor control applications benefit from the PIC24FV16KM204-E/ML's CCP modules generating complementary PWMs at 32 MIPS for closed-loop commutation. The integrated op-amps sense current via shunt resistors, and the 12-bit ADC samples at up to 200 ksps for back-EMF sensing. The 16 KB Flash holds typical sensorless FOC firmware; the 44-QFN provides adequate thermal performance for 200 mA-class drivers.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24FV16KM204-E/ML — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24FV16KM202-E/ML | PIC24FV16KM204T-E/ML | PIC24FV16KM104-E/ML | PIC24F16KM204-E/ML | PIC24FV32KM204-E/ML | PIC24FV16KA302-E/ML |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8) — same | 44-QFN (8x8) — same | 44-QFN (8x8) — same | 44-QFN (8x8) — same | 44-QFN (8x8) — same | 44-QFN (8x8) — same | 44-QFN (8x8) — same |
| Flash Memory | 16 KB | 16 KB | 16 KB | 8 KB | 16 KB | 32 KB | 16 KB |
| SRAM | 2 KB | 1 KB | 2 KB | 1 KB | 2 KB | 2 KB | 2 KB |
| Temperature Range | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) |
| CTMU (Capacitive Touch) | Yes | Yes | Yes | Yes | Yes | Yes | No (KA lacks CTMU) |
| 12-bit ADC + 8-bit DAC + Op-Amps | Yes (KM analog-rich) | Yes (KM) | Yes (KM) | Yes (KM) | Yes (KM) | Yes (KM) | Reduced (less analog) |
Principais diferenciais
- 5V-tolerant 'FV' variant in a low-power family (vs PIC24F16KM204-E/ML (non-FV))
- Larger SRAM vs 'KM202' family sibling (vs PIC24FV16KM202-E/ML)
- Drop-in 32KB Flash upgrade available (vs PIC24FV32KM204-E/ML)
- Full analog-rich KM peripherals vs KA (vs PIC24FV16KA302-E/ML)
Notas de projeto
The PIC24FV16KM204-E/ML's on-chip regulator generates a 1.8V core from the 1.8-5.5V VDD. A 1uF to 10uF low-ESR ceramic cap must be placed as close as possible to the VCAP pin (pin 7) to ensure regulator stability. Power the AVDD pin from the same VDD source through a ferrite bead or small RC filter to keep ADC noise below the 12-bit LSB. Decouple every VDD/AVDD pair with 100nF + 10uF capacitors.
The 44-pin QFN-EP package has an exposed thermal pad that MUST be soldered to a ground copper pour to meet datasheet thermal ratings. Thermal vias from the pad to inner/outer ground planes significantly improve heat dissipation for higher core currents. Keep all analog traces short and away from PWM or switching traces; route the ICSP pair (PGECx/PGEDx) directly to a 6-pin programming header with no series components. Use a ground guard around sensitive analog inputs.
Do not confuse the '-E' industrial grade (-40C to +125C) with the '-I' industrial grade (-40C to +85C); verify the exact temperature range in your datasheet and BOM. The 'FV' 5V tolerance applies to VDD only — driving peripherals above their rated max will damage the part. For ICSP programming, ensure the MCLR pull-up is at least 10k and the PGC/PGD traces are short to avoid programming failures. Read the silicon errata document published on microchip.com before locking down the firmware.
When using CTMU for capacitive touch, route sense traces as guarded, balanced pairs with a ground-fill keep-out on the sides, and avoid routing them near noisy digital or PWM traces. For best ADC SNR at 200 ksps, use AVDD decoupling, short analog traces, and average multiple conversions in firmware if the application permits. The on-chip op-amps have limited drive — keep capacitive loads under 50 pF on op-amp outputs for stability.
Informações de conformidade
RoHS and REACH compliance per DigiKey product listing. Industrial (-E) temperature grade, not AEC-Q100 automotive qualified.
