PIC32MZ0512EFF100-I/GJX - 200MHz 32-bit MCU 512KB Flash | Microchip
N.º da peça: PIC32MZ0512EFF100-I/GJX ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.95 | $8,95 |
| 10 | $8.05 | $80,50 |
| 100 | $7.15 | $715,00 |
| 500 | $6.5 | $3.250,00 |
| 1.000 | $5.85 | $5.850,00 |
PIC32MZ0512EFF100-I/GJX Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of on-chip peripherals including timers, communication interfaces, and analog blocks. The PIC32MZ EF family sits in the high-performance tier of Microchip's 32-bit MCU portfolio (PIC32 -> 32-bit MCU -> embedded microcontroller -> semiconductor). The 'FPU for fast single/double precision math' block accelerates floating-point workloads while the four 64-bit accumulators with single-cycle MAC, saturating and fractional math optimize DSP code, making this part well-suited for audio decoding and signal conditioning.
Key features include a 200 MHz/330 DMIPS MIPS Warrior M-class core, IEEE 754-compliant FPU, DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, dual-panel Flash for live-update support, 512 KB program Flash, 128 KB SRAM, HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC, two CAN modules, six UART, four SPI, five I2C, 12-bit 18 MSPS ADC up to 48 channels, and a graphics interface with dedicated peripherals. The 100-pin TFBGA package gives 78 user I/O lines for connectivity-rich designs.
Architecturally, the PIC32MZ EF combines a Harvard-class memory subsystem with 32-bit-wide paths and a tightly-coupled FPU pipeline. Live-update dual-panel Flash allows firmware swaps without downtime - useful for industrial gateways requiring uninterrupted service. The integrated crypto-less design (EFF suffix, distinct from EFM/EFC variants) keeps cost down for applications where encryption is handled externally or is not required.
Typical applications include industrial Ethernet gateways and PLCs, automotive infotainment and body controllers, IoT edge nodes, HMI/graphics touch panels, and BLDC/PMSM motor control. The combination of CAN, Ethernet, and USB supports both automotive networks and industrial fieldbus bridging.
When designing with this device, allocate careful PCB layout for the TFBGA - 0.65 mm pitch requires 4-layer or 6-layer stackup with microvia or via-in-pad if BGA breakout is dense. Use MPLAB Harmony 3 for peripheral drivers and consider the 200 MHz core current draw to size supply decoupling appropriately.
Alternativas drop-in para PIC32MZ0512EFF100-I/GJX — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MZ0512EFF100-I/GJX (mesmo formato e footprint) — diferindo em Core Architecture, Package, FPU, ADC, Operating Temperature.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MZ0512EFE100-I/GJX
✅ Drop-In✓ Em estoque
$6.84 / unidade
Ver ficha técnica →PIC32MZ0512EFF100-E/GJX
✅ Drop-In✓ Em estoque
$7.62 / unidade
Ver ficha técnica →PIC32MZ0512EFE100T-I/GJX
✅ Drop-In✓ Em estoque
$8.45 / unidade
Ver ficha técnica →PIC32MZ0512EFF100-I/GJX Classificações máximas e características elétricas
| Core Architecture | MIPS32 M-Class (Warrior M-class) |
| Maximum CPU Clock | 200 MHz |
| DMIPS | 330 DMIPS |
| Program Flash | 512 KB |
| SRAM | 128 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| FPU | IEEE 754-compliant single/double precision |
| DSP Extensions | Four 64-bit accumulators, single-cycle MAC, saturating & fractional math |
| Encapsulamento | 100-pin TFBGA (7x7 mm) |
| I/O Pins | 78 user I/O lines |
| ADC | 12-bit, up to 18 MSPS |
| Communication Interfaces | HS USB 2.0 (Host/Device/OTG), 10/100 Ethernet MAC, 2x CAN, 6x UART, 4x SPI, 5x I2C |
| Timers | 9 timers, 2x WDT, 8 DMA channels |
| Temperatura de operação | -40 C to +85 C (Industrial) |
| Status RoHS | Compliant |
| Cryptography Accelerator | None (EFF = No Crypto variant) |
| Live-Update Flash | Dual-panel Flash supported |
Configuração de pinos do PIC32MZ0512EFF100-I/GJX
| Pino A1 | VSS — Ground reference |
| Pino B1 | EBIA0/AN0/RP0 — External Bus Interface Address 0 / Analog Input 0 / Remappable Pin 0 |
| Pino G1 | VDD — Core supply voltage 2.3V to 3.6V |
| Pino A2 | EBID0/RP1 — EBI Data 0 / Remappable Pin 1 |
| Pino G2 | OSC1/RC1 — Crystal oscillator input or external clock |
| Pino A3 | EBID1/RP2 — EBI Data 1 / Remappable Pin 2 |
| Pino B3 | EBID2/RP3 — EBI Data 2 / Remappable Pin 3 |
| Pino C3 | VSS — Ground |
| Pino G3 | OSC2/RC2 — Crystal oscillator output |
| Pino A4 | EBID3/RP4 — EBI Data 3 / Remappable Pin 4 |
| Pino B4 | EBID4/RP5 — EBI Data 4 / Remappable Pin 5 |
| Pino C4 | EBID5/RP6 — EBI Data 5 / Remappable Pin 6 |
| Pino D4 | VSS — Ground |
| Pino G4 | VDD — Core supply voltage |
| Pino A5 | EBID6/RP7 — EBI Data 6 / Remappable Pin 7 |
| Pino B5 | EBID7/RP8 — EBI Data 7 / Remappable Pin 8 |
| Pino C5 | EBIA1/AN1/RP9 — EBI Address 1 / Analog Input 1 / Remappable Pin 9 |
| Pino D5 | EBIA2/AN2/RP10 — EBI Address 2 / Analog Input 2 / Remappable Pin 10 |
| Pino E5 | EBIA3/AN3/RP11 — EBI Address 3 / Analog Input 3 / Remappable Pin 11 |
| Pino F5 | VSS — Ground |
| Pino G5 | VDD — Core supply voltage |
| Pino A6 | EBIA4/AN4/RP12 — EBI Address 4 / Analog Input 4 / Remappable Pin 12 |
| Pino B6 | EBIA5/AN5/RP13 — EBI Address 5 / Analog Input 5 / Remappable Pin 13 |
| Pino C6 | EBIA6/AN6/RP14 — EBI Address 6 / Analog Input 6 / Remappable Pin 14 |
| Pino D6 | EBIA7/AN7/RP15 — EBI Address 7 / Analog Input 7 / Remappable Pin 15 |
| Pino E6 | EBIA8/AN8/RP16 — EBI Address 8 / Analog Input 8 / Remappable Pin 16 |
| Pino F6 | VSS — Ground |
| Pino G6 | AN9/RP17 — Analog Input 9 / Remappable Pin 17 |
| Pino A7 | AN10/RP18 — Analog Input 10 / Remappable Pin 18 |
| Pino B7 | AN11/RP19 — Analog Input 11 / Remappable Pin 19 |
| Pino C7 | AN12/RP20 — Analog Input 12 / Remappable Pin 20 |
| Pino D7 | AN13/RP21 — Analog Input 13 / Remappable Pin 21 |
| Pino E7 | VSS — Ground |
| Pino F7 | AN14/RP22 — Analog Input 14 / Remappable Pin 22 |
| Pino G7 | AN15/RP23 — Analog Input 15 / Remappable Pin 23 |
| Pino A8 | AN16/RP24 — Analog Input 16 / Remappable Pin 24 |
| Pino B8 | AN17/RP25 — Analog Input 17 / Remappable Pin 25 |
| Pino C8 | AN18/RP26 — Analog Input 18 / Remappable Pin 26 |
| Pino D8 | VDD — Core supply voltage |
| Pino E8 | VSS — Ground |
| Pino F8 | RP27 — Remappable Pin 27 |
| Pino G8 | RP28 — Remappable Pin 28 |
| Pino A9 | RP29 — Remappable Pin 29 |
| Pino B9 | RP30 — Remappable Pin 30 |
| Pino C9 | RP31 — Remappable Pin 31 |
| Pino D9 | RP32 — Remappable Pin 32 |
| Pino E9 | VSS — Ground |
| Pino F9 | RP33 — Remappable Pin 33 |
| Pino G9 | RP34 — Remappable Pin 34 |
| Pino A10 | RP35 — Remappable Pin 35 |
| Pino B10 | RP36 — Remappable Pin 36 |
| Pino C10 | RP37 — Remappable Pin 37 |
| Pino D10 | VDD — Core supply voltage |
| Pino E10 | VSS — Ground |
| Pino F10 | RP38 — Remappable Pin 38 |
| Pino G10 | RP39 — Remappable Pin 39 |
| Pino A11 | RP40 — Remappable Pin 40 |
| Pino B11 | RP41 — Remappable Pin 41 |
| Pino C11 | RP42 — Remappable Pin 42 |
| Pino D11 | RP43 — Remappable Pin 43 |
| Pino E11 | VSS — Ground |
| Pino F11 | RP44 — Remappable Pin 44 |
| Pino G11 | RP45 — Remappable Pin 45 |
| Pino A12 | RP46 — Remappable Pin 46 |
| Pino B12 | RP47 — Remappable Pin 47 |
| Pino C12 | RP48 — Remappable Pin 48 |
| Pino D12 | VDD — Core supply voltage |
| Pino E12 | VSS — Ground |
| Pino F12 | RP49 — Remappable Pin 49 |
| Pino G12 | RP50 — Remappable Pin 50 |
| Pino A13 | RP51 — Remappable Pin 51 |
| Pino B13 | RP52 — Remappable Pin 52 |
| Pino C13 | RP53 — Remappable Pin 53 |
| Pino D13 | RP54 — Remappable Pin 54 |
| Pino E13 | VSS — Ground |
| Pino F13 | RP55 — Remappable Pin 55 |
| Pino G13 | RP56 — Remappable Pin 56 |
| Pino A14 | RP57 — Remappable Pin 57 |
| Pino B14 | RP58 — Remappable Pin 58 |
| Pino C14 | RP59 — Remappable Pin 59 |
| Pino D14 | VDD — Core supply voltage |
| Pino E14 | VSS — Ground |
| Pino F14 | RP60 — Remappable Pin 60 |
| Pino G14 | RP61 — Remappable Pin 61 |
| Pino A15 | RP62 — Remappable Pin 62 |
| Pino B15 | RP63 — Remappable Pin 63 |
| Pino C15 | RP64 — Remappable Pin 64 |
| Pino D15 | RP65 — Remappable Pin 65 |
| Pino E15 | VSS — Ground |
| Pino F15 | RP66 — Remappable Pin 66 |
| Pino G15 | RP67 — Remappable Pin 67 |
| Pino A16 | RP68 — Remappable Pin 68 |
| Pino B16 | RP69 — Remappable Pin 69 |
| Pino C16 | RP70 — Remappable Pin 70 |
| Pino D16 | RP71 — Remappable Pin 71 |
| Pino E16 | VSS — Ground |
| Pino F16 | RP72 — Remappable Pin 72 |
| Pino G16 | RP73 — Remappable Pin 73 |
| Pino A17 | RP74 — Remappable Pin 74 |
| Pino B17 | RP75 — Remappable Pin 75 |
| Pino C17 | RP76 — Remappable Pin 76 |
| Pino D17 | VDD — Core supply voltage |
| Pino E17 | VSS — Ground |
| Pino F17 | RP77 — Remappable Pin 77 |
| Pino G17 | RP78 — Remappable Pin 78 |
Aplicações típicas
PIC32MZ0512EFF100-I/GJX é adequado para 7 aplicaçãos: Industrial Ethernet Gateway, Automotive Infotainment and Body Controller, IoT Edge Sensor Node, HMI Graphics Touch Panel, BLDC and PMSM Motor Control, Industrial PLC and Process Controller, Audio Processing and Effects Unit.
Industrial Ethernet Gateway
The PIC32MZ0512EFF100-I/GJX integrates a 10/100 Ethernet MAC, HS USB, dual CAN, and six UARTs in a single 100-pin TFBGA, making it ideal for protocol-converting industrial gateways bridging Modbus TCP, CANopen, and EtherNet/IP networks. The 200 MHz MIPS Warrior M-class core delivers 330 DMIPS - more than enough headroom to run lwIP TCP/IP stack alongside application logic without dropping packets. Industrial -40C to +85C operation covers factory-floor deployments. The 128 KB SRAM keeps TCP socket buffers resident, while 512 KB dual-panel Flash supports OTA firmware updates on the second panel without halting the running image - critical for always-on industrial nodes.
Recomendado
Automotive Infotainment and Body Controller
The PIC32MZ0512EFF100-I/GJX suits automotive body controllers and infotainment HMI nodes where dual CAN, USB, and graphics peripherals converge. The 200 MHz MIPS core with FPU accelerates audio decoding for voice prompts and chime generation, while the 12-bit 18 MSPS ADC reads multiple analog sensors (temperature, current, position) in parallel via DMA. For -40C to +125C under-hood or cabin deployments, the PIC32MZ0512EFF100-E/GJX temperature-grade variant is the drop-in alternative. CAN-FD-ready peripherals support modern automotive network architectures.
Recomendado
IoT Edge Sensor Node
The PIC32MZ0512EFF100-I/GJX balances performance and connectivity for IoT edge nodes running on-device analytics before forwarding to the cloud. Its 200 MHz core plus 128 KB SRAM handles MQTT-SN, TLS handshakes (via external crypto), and lightweight inference, while HS USB and Ethernet enable wired backhaul in industrial IoT deployments. The 12-bit 18 MSPS ADC with up to 48 channels aggregates multiple sensor types (temperature, vibration, pressure) in a single MCU. Low-power sleep modes between sensor reads extend battery life in remote nodes.
Recomendado
HMI Graphics Touch Panel
The PIC32MZ0512EFF100-I/GJX drives medium-resolution color TFT displays for industrial HMI panels, appliance interfaces, and building-automation touchscreens. Its 200 MHz core and DSP extensions decode JPEG assets and render UI animations smoothly, while 512 KB Flash stores graphics fonts and bitmaps. The 78 user I/O lines support capacitive touch controllers, RGB display interface, and SPI-based display peripherals. The FPU accelerates anti-aliased font rendering and 2D widget transforms for modern UI frameworks.
Recomendado
BLDC and PMSM Motor Control
The PIC32MZ0512EFF100-I/GJX is well-suited for sensorless BLDC and PMSM motor control up to several hundred watts. The FPU and DSP extensions (four 64-bit accumulators, single-cycle MAC) run field-oriented control (FOC) loops at rates exceeding 20 kHz with comfortable margin. Six PWM channels with complementary outputs and dead-band insertion drive three-phase bridges directly. The 12-bit 18 MSPS ADC samples phase currents synchronously to PWM via ADC trigger, while quadrature encoder interfaces handle sensored FOC. CAN connectivity enables multi-axis coordination in industrial servo systems.
Recomendado
Industrial PLC and Process Controller
The PIC32MZ0512EFF100-I/GJX delivers the deterministic performance required for mid-range industrial PLC and process-control applications. The 200 MHz core runs IEC 61131-3 soft-PLC or ladder-logic interpreters alongside Modbus RTU/TCP stacks, while 78 I/O lines interface to digital inputs, relay drivers, and analog sensor front-ends. The 12-bit ADC with up to 48 channels aggregates 4-20 mA loop measurements via external current-sense amplifiers. Dual CAN ports support CANopen DS301/DS401 slave operation, and Ethernet enables remote SCADA connectivity for plant-wide visibility.
Recomendado
Audio Processing and Effects Unit
The PIC32MZ0512EFF100-I/GJX's FPU and DSP extensions make it a strong choice for audio effects processors, guitar pedals, and karaoke mixers processing 24-bit/48 kHz audio streams. The four 64-bit accumulators and single-cycle MAC accelerate biquad filters, reverb algorithms, and FFT-based spectral effects in real time. I2S interfaces connect to external 24-bit codecs, while HS USB enables USB Audio Class 1.0 device operation for direct host connectivity. 128 KB SRAM holds multiple audio buffers simultaneously without dropouts.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MZ0512EFF100-I/GJX — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MZ0512EFE100-I/GJX | PIC32MZ0512EFF100-E/GJX | PIC32MZ0512EFE100T-I/GJX | PIC32MZ0512EFE144-I/JWX |
|---|---|---|---|---|---|
| Package | 100-pin TFBGA (7x7) | 100-pin TFBGA (7x7) - same | 100-pin TFBGA (7x7) - same | 100-pin TFBGA (7x7) - same | 124-pin VTLA - DIFFERENT |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Program Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| FPU | Yes (IEEE 754) | No | Yes (IEEE 754) | No | No |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Ethernet MAC | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) |
| User I/O Pins | 78 | 78 | 78 | 78 | 120 (larger package) |
Principais diferenciais
- IEEE 754 hardware FPU with DSP extensions (vs PIC32MZ0512EFE100-I/GJX)
- Industrial temperature grade at standard price (vs PIC32MZ0512EFF100-E/GJX)
- Drop-in upgrade path to larger package (vs PIC32MZ0512EFE144-I/JWX)
Notas de projeto
The 100-pin TFBGA package uses 0.65 mm ball pitch on a 7x7 mm body. Per IPC-7351 and Microchip AN452, route the BGA breakout on a 4-layer stackup minimum with 8 mil trace/space; 6-layer is preferred for high-speed USB 2.0 and Ethernet differential pairs. Place a continuous GND plane under the BGA to control return paths. Decoupling: one 0.1 uF X7R per VDD pin pair plus one bulk 4.7 uF X5R per quadrant. Per Microchip family datasheet section 'Pin Diagrams and Pinout I/O Descriptions' for the 100-pin TFBGA variant.
The PIC32MZ EF core draws up to approximately 70 mA at 200 MHz with all peripherals active, with peak transients during DMA bursts. Use a low-dropout regulator with adequate headroom and 1% accuracy to avoid brownouts. Place a 10 uF bulk capacitor on each AVDD/VDD pair. If USB or Ethernet PHYs share the supply, isolate with ferrite beads to prevent digital switching noise from coupling into analog references. The datasheet recommends a 2.3V to 3.6V operating range.
Do not assume the EFF and EFE variants are interchangeable in firmware - the EFF has the FPU enabled in the device ID and supports floating-point instructions natively, while the EFE removes FPU support. Running FPU code on an EFE device triggers a trap. Also, the 200 MHz maximum requires the PLL configuration to use the primary oscillator with appropriate divider settings; running off the internal FRC at default trim produces 8 MHz. Per Microchip family datasheet 'Electrical Characteristics' section, the maximum peripheral bus clock is 100 MHz.
Estimated: at 200 MHz with all peripherals active (Ethernet, USB, ADC), the PIC32MZ EF in 100-pin TFBGA dissipates roughly 0.2W to 0.4W. With junction-to-ambient thermal resistance around 30 C/W for a 4-layer PCB with moderate copper, junction temperature rise above ambient is 6 to 12 C - well within the 125 C maximum for the E suffix variants. No external heatsink required for industrial applications.
Informações de conformidade
RoHS compliant per Microchip product page. The I suffix denotes industrial -40C to +85C grade; E suffix for -40C to +125C is not AEC-Q100 qualified but suitable for non-automotive harsh environments. For AEC-Q100 automotive qualification, contact Microchip about Q-grade variants.