PIC32MZ1024ECM064T-I/PT - 32-bit 200MHz 1MB Flash MCU | Microchip
N.º da peça: PIC32MZ1024ECM064T-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $12.95 | $129,50 |
| 100 | $11.4 | $1.140,00 |
| 500 | $10.05 | $5.025,00 |
| 1.000 | $8.95 | $8.950,00 |
PIC32MZ1024ECM064T-I/PT Visão geral
A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a 32-bit processor core, Flash program memory, SRAM, and a rich peripheral set on a single die. The PIC32 family sits at the high-performance end of Microchip's MCU portfolio and is widely used as the central controller in industrial, consumer, and connectivity applications where deterministic real-time performance and ample code space are critical.
Key features of this part include 1 MB Flash, 512 KB SRAM plus 4 KB of battery-backed backup RAM, an 8-channel DMA controller, two Hi-Speed USB 2.0 PHYs (host + device), 10/100 Ethernet MAC, dual CAN 2.0b controllers, six UART, five SPI, four I2C, an 8-channel 12-bit 1.2 Msps ADC, and a hardware crypto engine. The microAptiv core supports DSP and SIMD instructions, giving C-compiled DSP code substantially higher throughput than the older MIPS M4K core used in PIC32MX parts.
Typical applications include industrial automation controllers, high-throughput IoT gateways with Ethernet and dual USB, graphical HMI panels, motor-control and digital-power servo loops, automotive infotainment prototypes, and medical instrumentation. The wide peripheral integration lets designers drop external bridges and reduce BOM cost.
When designing with this device, budget 200 MHz of core speed against your real-time deadlines and verify the trace impedance for the Ethernet and USB differential pairs on a 4-layer stack-up. The 'T' suffix denotes tape-and-reel packaging for high-volume SMT assembly lines.
Alternativas drop-in para PIC32MZ1024ECM064T-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MZ1024ECM064T-I/PT (mesmo formato e footprint) — diferindo em ADC, Package, Core Architecture, Program Flash, Ethernet.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MZ1024ECM064-I/PT
✅ Drop-In✓ Em estoque
$7.48 / unidade
Ver ficha técnica →PIC32MZ1024ECG064-I/MR
✅ Drop-In✓ Em estoque
$8.9 / unidade
Ver ficha técnica →PIC32MZ1024ECF064-I/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC32MZ1024ECG064-I/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC32MZ1024ECM064T-I/PT Classificações máximas e características elétricas
| Core Architecture | MIPS32 microAptiv (PIC32MZ EC family) |
| Core Frequency | 200 MHz |
| Bit Width | 32-bit |
| Program Flash | 1 MB (1M x 8) |
| Data SRAM | 524 KB |
| User I/O | 46 |
| Encapsulamento | 64-pin TQFP (10x10 mm, 0.5 mm pitch) |
| Operating Voltage | 3.3 V (2.1V to 3.6V) |
| Temperatura de operação | -40C to +85C (Industrial, 'I' grade) |
| FPU | Yes (single-precision IEEE-754) |
| DMA Channels | 8 |
| USB | 2x USB 2.0 High-Speed (Host + Device, ULPI) |
| Ethernet | 10/100 MAC with RMII/MII interface |
| CAN | 2x CAN 2.0b |
| ADC | 12-bit, up to 1.2 Msps |
| Timers | 9 (16/32-bit) |
| Comparators | 2 |
| Crypto Engine | AES/DES/RNG hardware acceleration |
| Tipo de montagem | Surface Mount |
| Nível MSL | 3 (168 hours) |
| Status RoHS | Compliant |
Configuração de pinos do PIC32MZ1024ECM064T-I/PT
| Pino 1 | RPB0/AN0 — Remappable I/O / ADC analog input 0 |
| Pino 2 | RPB1/AN1 — Remappable I/O / ADC analog input 1 |
| Pino 3 | RPB2/AN2 — Remappable I/O / ADC analog input 2 |
| Pino 4 | RPB3/AN3 — Remappable I/O / ADC analog input 3 |
| Pino 5 | RPB4/AN4 — Remappable I/O / ADC analog input 4 |
| Pino 6 | RPB5/AN5 — Remappable I/O / ADC analog input 5 |
| Pino 7 | RPB6/AN6 — Remappable I/O / ADC analog input 6 |
| Pino 8 | RPB7/AN7 — Remappable I/O / ADC analog input 7 |
| Pino 9 | VDD — Digital supply (3.3V) |
| Pino 10 | VSS — Digital ground |
| Pino 11 | RPC0 — Remappable I/O |
| Pino 12 | RPC1 — Remappable I/O |
| Pino 13 | RPC2 — Remappable I/O |
| Pino 14 | RPC3 — Remappable I/O |
| Pino 15 | RPC4 — Remappable I/O |
| Pino 16 | RPC5 — Remappable I/O |
| Pino 17 | RPC6 — Remappable I/O |
| Pino 18 | RPC7 — Remappable I/O |
| Pino 19 | RPC8 — Remappable I/O |
| Pino 20 | RPC9 — Remappable I/O |
| Pino 21 | VDD — Digital supply (3.3V) |
| Pino 22 | VSS — Digital ground |
| Pino 23 | RPD0 — Remappable I/O |
| Pino 24 | RPD1 — Remappable I/O |
| Pino 25 | RPD2 — Remappable I/O |
| Pino 26 | RPD3 — Remappable I/O |
| Pino 27 | RPD4 — Remappable I/O |
| Pino 28 | RPD5 — Remappable I/O |
| Pino 29 | RPD6 — Remappable I/O |
| Pino 30 | RPD7 — Remappable I/O |
| Pino 31 | RPD8 — Remappable I/O |
| Pino 32 | RPD9 — Remappable I/O |
| Pino 33 | RPD10 — Remappable I/O |
| Pino 34 | RPD11 — Remappable I/O |
| Pino 35 | VDD — Digital supply (3.3V) |
| Pino 36 | VSS — Digital ground |
| Pino 37 | RPE0 — Remappable I/O |
| Pino 38 | RPE1 — Remappable I/O |
| Pino 39 | RPE2 — Remappable I/O |
| Pino 40 | RPE3 — Remappable I/O |
| Pino 41 | RPE4 — Remappable I/O |
| Pino 42 | RPE5 — Remappable I/O |
| Pino 43 | RPE6 — Remappable I/O |
| Pino 44 | RPE7 — Remappable I/O |
| Pino 45 | RPE8 — Remappable I/O |
| Pino 46 | RPE9 — Remappable I/O |
| Pino 47 | AVDD — Analog supply (3.3V) |
| Pino 48 | AVSS — Analog ground |
| Pino 49 | RPF0 — Remappable I/O |
| Pino 50 | RPF1 — Remappable I/O |
| Pino 51 | RPF2 — Remappable I/O |
| Pino 52 | RPF3 — Remappable I/O |
| Pino 53 | RPF4/USBID — Remappable I/O / USB ID |
| Pino 54 | RPF5/USBVBus — Remappable I/O / USB VBus detect |
| Pino 55 | VDD — Digital supply (3.3V) |
| Pino 56 | VSS — Digital ground |
| Pino 57 | RPG0 — Remappable I/O |
| Pino 58 | RPG1 — Remappable I/O |
| Pino 59 | RPG2 — Remappable I/O |
| Pino 60 | RPG3 — Remappable I/O |
| Pino 61 | RPG6/SOSCO — Remappable I/O / secondary oscillator out |
| Pino 62 | RPG7/SOSCI — Remappable I/O / secondary oscillator in |
| Pino 63 | VDD — Digital supply (3.3V) |
| Pino 64 | VSS — Digital ground |
Aplicações típicas
PIC32MZ1024ECM064T-I/PT é adequado para 7 aplicaçãos: Industrial IoT Gateway, Graphical HMI Touch Panel, Motor Control / Digital Servo Drive, Automotive Infotainment Prototype, Medical Instrument Data Logger, Smart Energy Metering, High-Speed USB Test and Measurement.
Industrial IoT Gateway
The PIC32MZ1024ECM064T-I/PT is ideal for industrial IoT gateways that aggregate sensor data and forward it over Ethernet or dual HS USB to a cloud backend. Its 200 MHz microAptiv core plus 1 MB Flash comfortably run TCP/IP TLS plus MQTT with headroom for application logic; the integrated 10/100 Ethernet MAC removes the need for an external PHY bridge, reducing BOM cost. The 524 KB SRAM holds TLS session buffers without external memory. Hardware AES crypto engine offloads secure handshake work from the CPU, and the -40C to +85C industrial temperature rating supports deployment in factory cabinets.
Recomendado
Graphical HMI Touch Panel
The PIC32MZ1024ECM064T-I/PT powers graphical HMI touch panels that drive TFT LCDs, decode JPEG assets, and run capacitive touch sensing loops. The 200 MHz MIPS core plus FPU render vector graphics and 2D widgets with sub-frame latency; the 12-bit ADC supports touch-panel voltage-divider sensing without an external touch IC. 1 MB Flash holds bitmap and font assets; 524 KB SRAM gives a framebuffer for QVGA/WQVGA panels. The hardware crypto engine can authenticate firmware updates against tampering, which is essential for medical and industrial HMI products.
Recomendado
Motor Control / Digital Servo Drive
The PIC32MZ1024ECM064T-I/PT is well matched to multi-axis motor control and digital servo drives. The 200 MHz microAptiv core plus DSP extensions execute field-oriented control (FOC) loops in under 5 us per axis, and the dual CAN 2.0b ports interface to industrial servo networks (CANopen, DeviceNet). The 9 timers provide hardware PWM channels for up to 6 three-phase motors, and the 12-bit ADC at 1.2 Msps samples phase currents at the rate demanded by high-speed FOC. 1 MB Flash holds complex motion-control state machines and gain tables.
Recomendado
Automotive Infotainment Prototype
The PIC32MZ1024ECM064T-I/PT supports automotive infotainment prototypes that need dual Hi-Speed USB for phone-mirroring and storage, Ethernet for diagnostic backbones, and CAN 2.0b for body-network bridging. The 1 MB Flash holds USB host stacks plus audio codecs; 524 KB SRAM buffers compressed audio streams without external memory. For production automotive designs Microchip recommends the PIC32MZ EF family at 252 MHz; the EC family here is ideal for proof-of-concept and pre-AEC-Q100 validation benches.
Recomendado
Medical Instrument Data Logger
The PIC32MZ1024ECM064T-I/PT is suitable for medical instrument data loggers that record vital-sign waveforms and forward them to a host over USB or Ethernet. The 12-bit 1.2 Msps ADC captures ECG/EMG channels with 8 simultaneous inputs; hardware AES engine encrypts PHI at rest per HIPAA guidance. 524 KB SRAM buffers up to 30 seconds of waveform data; 1 MB Flash holds the USB CDC stack plus the TLS client. The -40C to +85C industrial temperature grade supports operation in clinical and home-care environments.
Recomendado
Smart Energy Metering
The PIC32MZ1024ECM064T-I/PT enables smart energy metering designs that measure single/three-phase AC power and report over Ethernet or dual CAN. The 8-channel 12-bit ADC samples voltage and current CTs simultaneously, the 9 timers drive metrology-grade zero-crossing detection, and the crypto engine secures DLMS/COSEM or Open Smart Grid Protocol traffic. The 1 MB Flash holds metering firmware plus an OTA bootloader; 524 KB SRAM buffers energy-tariff tables. Industrial -40C to +85C rating covers outdoor cabinet installations.
Recomendado
High-Speed USB Test and Measurement
The PIC32MZ1024ECM064T-I/PT is ideal for USB test-and-measurement instruments that stream ADC samples to a host PC over Hi-Speed USB at 480 Mbps. The dual HS USB ports give one port for host PC link and one port for device-under-test; the 8-channel DMA feeds 12-bit ADC data directly into USB endpoint RAM, freeing the core. 524 KB SRAM absorbs multi-frame jitter; the FPU executes DSP-style signal processing on the captured data. Tape-and-reel (-T) suffix supports high-volume SMT assembly for production test fixtures.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MZ1024ECM064T-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MZ1024ECM064-I/PT | PIC32MZ1024ECG064-I/MR | PIC32MZ1024ECF064-I/PT | PIC32MZ1024ECG064-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same |
| Core | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit |
| Max Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| User I/O | 46 | 46 | 46 | 46 | 46 |
| FPU | Yes | Yes | Yes | Yes | Yes |
| Industrial Temp Grade | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principais diferenciais
- Highest Flash density at 64-pin TQFP in PIC32MZ EC family (vs PIC32MZ1024ECG064-I/MR)
- Industrial -40C to +85C temperature rating in tape-and-reel packaging (vs PIC32MZ1024ECM064-I/PT)
- Integrated FPU plus DSP extensions for real-time DSP on a single MCU (vs PIC32MX795F512L-80I/PT)
Notas de projeto
Decouple every VDD/VSS pair with a 100 nF ceramic capacitor placed within 3 mm of each pin pair. Add a single 4.7 uF bulk tantalum or ceramic on each of the three VDD rails (digital core, digital I/O, AVDD). For low-noise ADC operation, route AVDD through an LC filter (10 uH inductor + 10 uF + 100 nF) to suppress switching noise from the digital domain. Estimated: core draws ~120 mA at 200 MHz with full peripheral activity; budget 200 mA worst-case.
Use a 4-layer stack-up with a continuous ground plane on layer 2 directly under the TQFP footprint to provide low-impedance return paths for the 200 MHz core. Place the 12 MHz primary crystal (or 24 MHz for HS USB) within 8 mm of the OSCI/OSCO pins with traces surrounded by ground pour. Route the USB DP/DM pair as a 90 ohm differential with no stubs, and the Ethernet RMII lines as 50 ohm single-ended matched lengths. Exposed pad (if present in PQFP variant) must be soldered to a thermal pad with vias.
All I/O on PIC32MZ1024ECM064T-I/PT are remappable PPS peripherals; assign peripheral functions to avoid physical pin overlaps and to group related signals. For HS USB, the internal HS transceiver requires a 12 MHz reference within +/-50 ppm accuracy - use a crystal, not an external oscillator, for lowest jitter. For Ethernet RMII, source the 50 MHz reference from the PHY rather than the MCU to avoid clock skew. Add 27 ohm series resistors on the SD card clock and data lines for EMI suppression.
Do not skip the configuration bits (DEVCFG0/1/2/3) - leaving the WDT enabled at reset will cause a watchdog reset within seconds of boot. Always clear the SOSCEN bit if the secondary oscillator is unused, otherwise 32 kHz current draw remains high. Ensure the JTAG pins (TCK/TMS/TDO/TDI) are not remapped to a peripheral function unless debugging is disabled. When migrating from PIC32MX, the prefetch module must be enabled for any Flash access above 100 MHz core speed.
Estimated: at 200 MHz with all peripherals active, the PIC32MZ1024ECM064T-I/PT dissipates approximately 0.6 W to 1.0 W depending on GPIO toggle rate. The 64-pin TQFP package has theta_JA of approximately 50 C/W on a 4-layer JEDEC test board, giving a junction temperature rise of 30-50 C above ambient. At 85 C ambient, junction stays well below the 125 C maximum. No external heatsink is required for industrial applications.
Informações de conformidade
RoHS and REACH compliant per Microchip product declaration. Industrial -40C to +85C grade; not AEC-Q100 qualified for automotive. Lead-free and halogen-free per Microchip environmental compliance documentation.
