PIC32MZ1024ECM124T-I/TL - 200MHz 32-bit MCU 1MB Flash | Microchip
N.º da peça: PIC32MZ1024ECM124T-I/TL ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $13.42 | $13,42 |
| 10 | $12.08 | $120,80 |
| 100 | $10.73 | $1.073,00 |
| 500 | $9.39 | $4.695,00 |
| 1.000 | $8.4 | $8.400,00 |
PIC32MZ1024ECM124T-I/TL Visão geral
A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling higher code density, larger addressable memory, and richer peripheral integration than 8-bit or 16-bit MCUs. Within the broader taxonomy, this PIC32MZ1024ECM124 sits inside the microcontroller class of embedded processors, which itself belongs to the semiconductor integrated circuit (IC) family and is used for real-time control, connectivity, and human-machine interface (HMI) subsystems. The EC suffix denotes the Embedded Connectivity sub-family, which adds Ethernet, USB, CAN, and crypto accelerators optimized for connected industrial and IoT designs.
Key features of the PIC32MZ1024ECM124T-I/TL include a MIPS32 microAptiv core with hardware multiply/divide, 16 KB I-cache and 4 KB D-cache, a 12-bit 18 MSPS ADC with up to 48 analog inputs, dual CAN 2.0b controllers, 10/100 Ethernet MAC with MII/RMII interface, USB 2.0 high-speed OTG, a hardware crypto engine (AES, 3DES, SHA, MD5, RNG), and multiple UART, SPI, I2C, and I2S peripherals. The part also integrates a 9-channel DMA controller and supports up to 97 programmable I/O lines, with industrial-grade -40C to +85C operation (I temperature grade).
The architecture combines a 5-stage pipeline MIPS core with tightly-coupled SRAM and dual-bank Flash for live firmware updates. The on-chip crypto and connectivity peripherals offload networking stacks and TLS/SSL handshakes from the CPU, freeing cycles for application logic. Compared with the older PIC32MX series, the PIC32MZ EC family offers roughly 4x the CoreMark/MHz and a substantially richer connectivity peripheral set, while sharing the MPLAB X IDE and Harmony framework toolchain for code reuse.
Typical applications include industrial Ethernet gateways, secure connected sensors, building-automation controllers, USB-CAN bridges, and embedded HMI panels. The wide peripheral mix also suits motor-control front-ends, point-of-sale terminals, and connected medical instrumentation where deterministic real-time response is required.
When designing with this part, follow the VTLA 9x9 mm PCB land pattern, route the Ethernet MII/RMII traces as impedance-controlled 50 ohm differential pairs, and provide bulk + bypass capacitors close to every supply pin. Always validate crypto library versions against the latest MPLAB Harmony release for FIPS-relevant builds.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone.
Alternativas drop-in para PIC32MZ1024ECM124T-I/TL — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MZ1024ECM124T-I/TL (mesmo formato e footprint) — diferindo em Core Architecture, Package, ADC, Crypto Engine, DMA Channels.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MZ1024ECM124-I/TL
✅ Drop-In✓ Em estoque
$7.85 / unidade
Ver ficha técnica →PIC32MZ1024ECH124-I/TL
✅ Drop-In✓ Em estoque
$9.3 / unidade
Ver ficha técnica →PIC32MZ1024ECM124T-E/TL
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ1024EFM124T-I/TL
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ0512EFK124T-I/TL
✅ Drop-In✓ Em estoque
$6.12 / unidade
Ver ficha técnica →PIC32MZ1024ECM124T-I/TL Classificações máximas e características elétricas
| Core Architecture | MIPS32 microAptiv (PIC32) |
| Core Width | 32-bit |
| Maximum CPU Clock | 200 MHz |
| Performance | 330 DMIPS, 3.28 CoreMark/MHz |
| Program Memory (Flash) | 1 MB (1024 KB) |
| SRAM | 512 KB |
| Instruction Cache | 16 KB |
| Data Cache | 4 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Temperatura de operação | -40C to +85C (Industrial) |
| I/O Pins | 97 programmable |
| ADC | 12-bit, 18 MSPS, up to 48 channels |
| Ethernet | 10/100 MAC with MII/RMII |
| USB | USB 2.0 High-Speed OTG |
| CAN | 2x CAN 2.0b |
| Crypto Engine | AES, 3DES, SHA, MD5, RNG |
| DMA Channels | 9 |
| Encapsulamento | 124-VTLA (9x9 mm, 0.9 mm height) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do PIC32MZ1024ECM124T-I/TL
| Pino 1 | RA0 — Port A bit 0 / analog input |
| Pino 2 | RA1 — Port A bit 1 / analog input |
| Pino 3 | RA2 — Port A bit 2 / analog input |
| Pino 4 | RA3 — Port A bit 3 / analog input |
| Pino 5 | RA4 — Port A bit 4 / analog input |
| Pino 6 | RA5 — Port A bit 5 / analog input |
| Pino 7 | RA6 — Port A bit 6 / analog input |
| Pino 8 | RA7 — Port A bit 7 / analog input |
| Pino 9 | RA8 — Port A bit 8 |
| Pino 10 | RA9 — Port A bit 9 |
| Pino 11 | RA10 — Port A bit 10 |
| Pino 12 | RA11 — Port A bit 11 |
| Pino 13 | RA12 — Port A bit 12 |
| Pino 14 | RA13 — Port A bit 13 |
| Pino 15 | RA14 — Port A bit 14 |
| Pino 16 | RA15 — Port A bit 15 |
| Pino 17 | VDD — Core supply voltage |
| Pino 18 | VSS — Ground reference |
| Pino 19 | RB0 — Port B bit 0 / analog input |
| Pino 20 | RB1 — Port B bit 1 / analog input |
| Pino 21 | RB2 — Port B bit 2 / analog input |
| Pino 22 | RB3 — Port B bit 3 / analog input |
| Pino 23 | RB4 — Port B bit 4 / analog input |
| Pino 24 | RB5 — Port B bit 5 / analog input |
| Pino 25 | RB6 — Port B bit 6 / analog input |
| Pino 26 | RB7 — Port B bit 7 / analog input |
| Pino 27 | RB8 — Port B bit 8 |
| Pino 28 | RB9 — Port B bit 9 |
| Pino 29 | RB10 — Port B bit 10 |
| Pino 30 | RB11 — Port B bit 11 |
| Pino 31 | RB12 — Port B bit 12 |
| Pino 32 | RB13 — Port B bit 13 |
| Pino 33 | RB14 — Port B bit 14 |
| Pino 34 | RB15 — Port B bit 15 |
| Pino 35 | VDD — I/O supply voltage |
| Pino 36 | VSS — Ground reference |
| Pino 37 | RC0 — Port C bit 0 |
| Pino 38 | RC1 — Port C bit 1 |
| Pino 39 | RC2 — Port C bit 2 |
| Pino 40 | RC3 — Port C bit 3 |
| Pino 41 | RC4 — Port C bit 4 |
| Pino 42 | RC5 — Port C bit 5 |
| Pino 43 | RC6 — Port C bit 6 |
| Pino 44 | RC7 — Port C bit 7 |
| Pino 45 | RC8 — Port C bit 8 |
| Pino 46 | RC9 — Port C bit 9 |
| Pino 47 | RC10 — Port C bit 10 |
| Pino 48 | RC11 — Port C bit 11 |
| Pino 49 | RC12 — Port C bit 12 |
| Pino 50 | RC13 — Port C bit 13 |
| Pino 51 | RC14 — Port C bit 14 |
| Pino 52 | RC15 — Port C bit 15 |
| Pino 53 | VDD — I/O supply voltage |
| Pino 54 | VSS — Ground reference |
| Pino 55 | RD0 — Port D bit 0 |
| Pino 56 | RD1 — Port D bit 1 |
| Pino 57 | RD2 — Port D bit 2 |
| Pino 58 | RD3 — Port D bit 3 |
| Pino 59 | RD4 — Port D bit 4 |
| Pino 60 | RD5 — Port D bit 5 |
| Pino 61 | RD6 — Port D bit 6 |
| Pino 62 | RD7 — Port D bit 7 |
| Pino 63 | RD8 — Port D bit 8 |
| Pino 64 | RD9 — Port D bit 9 |
| Pino 65 | RD10 — Port D bit 10 |
| Pino 66 | RD11 — Port D bit 11 |
| Pino 67 | RD12 — Port D bit 12 |
| Pino 68 | RD13 — Port D bit 13 |
| Pino 69 | RD14 — Port D bit 14 |
| Pino 70 | RD15 — Port D bit 15 |
| Pino 71 | VDD — I/O supply voltage |
| Pino 72 | VSS — Ground reference |
| Pino 73 | RE0 — Port E bit 0 |
| Pino 74 | RE1 — Port E bit 1 |
| Pino 75 | RE2 — Port E bit 2 |
| Pino 76 | RE3 — Port E bit 3 |
| Pino 77 | RE4 — Port E bit 4 |
| Pino 78 | RE5 — Port E bit 5 |
| Pino 79 | RE6 — Port E bit 6 |
| Pino 80 | RE7 — Port E bit 7 |
| Pino 81 | RE8 — Port E bit 8 |
| Pino 82 | RE9 — Port E bit 9 |
| Pino 83 | VDD — I/O supply voltage |
| Pino 84 | VSS — Ground reference |
| Pino 85 | RF0 — Port F bit 0 |
| Pino 86 | RF1 — Port F bit 1 |
| Pino 87 | RF2 — Port F bit 2 |
| Pino 88 | RF3 — Port F bit 3 |
| Pino 89 | RF4 — Port F bit 4 |
| Pino 90 | RF5 — Port F bit 5 |
| Pino 91 | RF6 — Port F bit 6 |
| Pino 92 | RF7 — Port F bit 7 |
| Pino 93 | RF8 — Port F bit 8 |
| Pino 94 | RF9 — Port F bit 9 |
| Pino 95 | RF10 — Port F bit 10 |
| Pino 96 | RF11 — Port F bit 11 |
| Pino 97 | RF12 — Port F bit 12 |
| Pino 98 | RF13 — Port F bit 13 |
| Pino 99 | VDD — I/O supply voltage |
| Pino 100 | VSS — Ground reference |
| Pino 101 | RG0 — Port G bit 0 |
| Pino 102 | RG1 — Port G bit 1 |
| Pino 103 | RG2 — Port G bit 2 |
| Pino 104 | RG3 — Port G bit 3 |
| Pino 105 | RG4 — Port G bit 4 |
| Pino 106 | RG5 — Port G bit 5 |
| Pino 107 | RG6 — Port G bit 6 |
| Pino 108 | RG7 — Port G bit 7 |
| Pino 109 | RG8 — Port G bit 8 |
| Pino 110 | RG9 — Port G bit 9 |
| Pino 111 | OSC1 — Crystal oscillator input |
| Pino 112 | OSC2 — Crystal oscillator output |
| Pino 113 | MCLR — Master clear / reset (active low) |
| Pino 114 | VDD — Core supply voltage |
| Pino 115 | VSS — Ground reference |
| Pino 116 | TRCLK — Trace clock (debug) |
| Pino 117 | TRD0 — Trace data 0 (debug) |
| Pino 118 | TRD1 — Trace data 1 (debug) |
| Pino 119 | TRD2 — Trace data 2 (debug) |
| Pino 120 | TRD3 — Trace data 3 (debug) |
| Pino 121 | DDM — USB D- data line |
| Pino 122 | DDP — USB D+ data line |
| Pino 123 | VUSB — USB transceiver supply |
| Pino 124 | VBUS — USB VBUS detect |
Aplicações típicas
PIC32MZ1024ECM124T-I/TL é adequado para 6 aplicaçãos: Industrial Ethernet Gateway, Connected IoT Sensor Hub, USB-to-CAN Bridge, Building Automation Controller, Embedded HMI / Touch Panel, Secure Point-of-Sale Terminal.
Industrial Ethernet Gateway
The PIC32MZ1024ECM124T-I/TL is a strong fit for industrial Ethernet gateways because it integrates a 10/100 MAC with MII/RMII plus a hardware crypto engine that offloads TLS/SSL handshakes from the CPU. At 200 MHz it sustains wire-rate processing of Modbus TCP, EtherNet/IP, or PROFINET frames while leaving cycles for protocol conversion. The 1 MB dual-panel Flash supports fail-safe OTA firmware updates in the field, and 512 KB of SRAM holds full TCP/IP stacks plus application buffers without external memory.
Recomendado
Connected IoT Sensor Hub
For connected IoT sensor hubs, the PIC32MZ1024ECM124T-I/TL provides 12-bit 18 MSPS ADC sampling up to 48 analog channels, on-chip AES/SHA crypto, and USB 2.0 High-Speed OTG for local diagnostics. The 9-channel DMA controller streams sensor data to memory without CPU intervention, leaving the 200 MHz core free for edge analytics. Industrial -40C to +85C operation lets the same part serve factory-floor and outdoor enclosures without re-qualification.
Recomendado
USB-to-CAN Bridge
The PIC32MZ1024ECM124T-I/TL is well suited to USB-to-CAN bridge designs because it combines USB 2.0 High-Speed OTG with dual independent CAN 2.0b controllers on the same die. At 200 MHz the core can repackage USB-CDC frames into CAN messages with deterministic latency, and the 512 KB SRAM buffers both buses without external memory. Industrial temperature rating supports under-hood automotive and machinery deployments where vibration and thermal stress are common.
Recomendado
Building Automation Controller
Building-automation controllers benefit from the PIC32MZ1024ECM124T-I/TL's mix of Ethernet, dual CAN, multiple UART/SPI/I2C, and 97 programmable I/O lines, which cover BACnet/IP, KNX, Modbus, and proprietary field-bus stacks in one device. The 1 MB dual-panel Flash allows secure OTA updates of building firmware, and the hardware crypto engine authenticates remote management sessions. The 124-VTLA 9x9 mm footprint fits compact DIN-rail enclosures while leaving room for optoisolated field wiring.
Recomendado
Embedded HMI / Touch Panel
The PIC32MZ1024ECM124T-I/TL drives small to medium HMI panels by pairing the 200 MHz core with the 12-bit ADC for touch sensing and a parallel interface for TFT displays up to WVGA resolution. The 1 MB Flash stores graphics assets and fonts, while 512 KB of SRAM holds frame buffers without external memory. Industrial temperature rating and the on-chip crypto engine also suit secure operator-interface panels on factory floors.
Recomendado
Secure Point-of-Sale Terminal
Point-of-sale terminals leverage the PIC32MZ1024ECM124T-I/TL's hardware AES/3DES/SHA engine to accelerate PIN encryption and EMV transaction processing, while the 200 MHz MIPS32 microAptiv core handles the application logic and display. The 1 MB dual-panel Flash supports signed firmware updates for PCI compliance, and 512 KB of SRAM holds transaction buffers. USB 2.0 High-Speed OTG plus Ethernet give flexible back-office connectivity for retail deployments.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MZ1024ECM124T-I/TL — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MZ1024ECM124-I/TL | PIC32MZ1024ECH124-I/TL | PIC32MZ1024ECM124T-E/TL | PIC32MZ1024EFM124T-I/TL | PIC32MZ0512EFK124T-I/TL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) |
| Core Family | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EF (microAptiv) | PIC32MZ EF (microAptiv) |
| Max CPU Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 252 MHz (+26%) | 252 MHz (+26%) |
| Flash | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 512 KB (-50%) |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 128 KB (-75%) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +125C (Extended) | -40C to +85C | -40C to +85C |
| Packaging | Tape & Reel | Tray | Tray | Tape & Reel | Tape & Reel | Tape & Reel |
Principais diferenciais
- Drop-in tray-pack alternative with identical die (vs PIC32MZ1024ECM124-I/TL)
- Pin-compatible upgrade path to 252 MHz EF family (vs PIC32MZ1024EFM124T-I/TL)
- Extended-temperature variant on same footprint (vs PIC32MZ1024ECM124T-E/TL)
Notas de projeto
The 124-VTLA package uses a land-grid-array pad layout under the package body. Follow Microchip's recommended VTLA-124 land pattern from the package specification document; deviations cause solder shorts under the body. Place a 4u7 + 100 nF bypass pair on every VDD/VSS pin pair, and route the 50 ohm Ethernet MII/RMII traces as impedance-controlled differential pairs with a continuous ground reference plane beneath.
The PIC32MZ1024ECM124T-I/TL has separate core and I/O supply domains. Decouple VDD (core) and the I/O supply rails with independent ferrite beads or LC filters, and bulk-decouple the VUSB rail with at least 10 uF to meet USB 2.0 High-Speed OTG inrush requirements. Hold the MCLR pin high through a 10 kohm pull-up and a 100 nF cap to ground to ensure clean resets.
At 200 MHz the MIPS32 microAptiv core emits switching noise with significant harmonic content above 100 MHz. Keep high-speed traces under 25 mm, use 4-layer stack-up with continuous ground, and avoid routing Ethernet signals across split planes. For RMII to an external PHY like the LAN8742A, match trace lengths within 50 mil to preserve the 50 MHz reference clock duty cycle.
Informações de conformidade
RoHS and REACH compliant per Microchip product page; industrial -40C to +85C temperature grade (-I suffix); no AEC-Q100 automotive qualification on this part number.
