PIC32MZ1024ECM124T-I/TL - 200MHz 32-bit MCU 1MB Flash | Microchip
Référence : PIC32MZ1024ECM124T-I/TL ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $13.42 | $13,42 |
| 10 | $12.08 | $120,80 |
| 100 | $10.73 | $1 073,00 |
| 500 | $9.39 | $4 695,00 |
| 1 000 | $8.4 | $8 400,00 |
PIC32MZ1024ECM124T-I/TL Présentation
A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling higher code density, larger addressable memory, and richer peripheral integration than 8-bit or 16-bit MCUs. Within the broader taxonomy, this PIC32MZ1024ECM124 sits inside the microcontroller class of embedded processors, which itself belongs to the semiconductor integrated circuit (IC) family and is used for real-time control, connectivity, and human-machine interface (HMI) subsystems. The EC suffix denotes the Embedded Connectivity sub-family, which adds Ethernet, USB, CAN, and crypto accelerators optimized for connected industrial and IoT designs.
Key features of the PIC32MZ1024ECM124T-I/TL include a MIPS32 microAptiv core with hardware multiply/divide, 16 KB I-cache and 4 KB D-cache, a 12-bit 18 MSPS ADC with up to 48 analog inputs, dual CAN 2.0b controllers, 10/100 Ethernet MAC with MII/RMII interface, USB 2.0 high-speed OTG, a hardware crypto engine (AES, 3DES, SHA, MD5, RNG), and multiple UART, SPI, I2C, and I2S peripherals. The part also integrates a 9-channel DMA controller and supports up to 97 programmable I/O lines, with industrial-grade -40C to +85C operation (I temperature grade).
The architecture combines a 5-stage pipeline MIPS core with tightly-coupled SRAM and dual-bank Flash for live firmware updates. The on-chip crypto and connectivity peripherals offload networking stacks and TLS/SSL handshakes from the CPU, freeing cycles for application logic. Compared with the older PIC32MX series, the PIC32MZ EC family offers roughly 4x the CoreMark/MHz and a substantially richer connectivity peripheral set, while sharing the MPLAB X IDE and Harmony framework toolchain for code reuse.
Typical applications include industrial Ethernet gateways, secure connected sensors, building-automation controllers, USB-CAN bridges, and embedded HMI panels. The wide peripheral mix also suits motor-control front-ends, point-of-sale terminals, and connected medical instrumentation where deterministic real-time response is required.
When designing with this part, follow the VTLA 9x9 mm PCB land pattern, route the Ethernet MII/RMII traces as impedance-controlled 50 ohm differential pairs, and provide bulk + bypass capacitors close to every supply pin. Always validate crypto library versions against the latest MPLAB Harmony release for FIPS-relevant builds.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour PIC32MZ1024ECM124T-I/TL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ1024ECM124T-I/TL (même facteur de forme et même empreinte) — différant par Core Architecture, Package, ADC, Crypto Engine, DMA Channels.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ1024ECM124-I/TL
✅ Remplacement direct✓ En stock
$7.85 / unité
Voir la fiche technique →PIC32MZ1024ECH124-I/TL
✅ Remplacement direct✓ En stock
$9.3 / unité
Voir la fiche technique →PIC32MZ1024ECM124T-E/TL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ1024EFM124T-I/TL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MZ0512EFK124T-I/TL
✅ Remplacement direct✓ En stock
$6.12 / unité
Voir la fiche technique →PIC32MZ1024ECM124T-I/TL Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 microAptiv (PIC32) |
| Core Width | 32-bit |
| Maximum CPU Clock | 200 MHz |
| Performance | 330 DMIPS, 3.28 CoreMark/MHz |
| Program Memory (Flash) | 1 MB (1024 KB) |
| SRAM | 512 KB |
| Instruction Cache | 16 KB |
| Data Cache | 4 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Température de fonctionnement | -40C to +85C (Industrial) |
| I/O Pins | 97 programmable |
| ADC | 12-bit, 18 MSPS, up to 48 channels |
| Ethernet | 10/100 MAC with MII/RMII |
| USB | USB 2.0 High-Speed OTG |
| CAN | 2x CAN 2.0b |
| Crypto Engine | AES, 3DES, SHA, MD5, RNG |
| DMA Channels | 9 |
| Boîtier | 124-VTLA (9x9 mm, 0.9 mm height) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MZ1024ECM124T-I/TL
| Broche 1 | RA0 — Port A bit 0 / analog input |
| Broche 2 | RA1 — Port A bit 1 / analog input |
| Broche 3 | RA2 — Port A bit 2 / analog input |
| Broche 4 | RA3 — Port A bit 3 / analog input |
| Broche 5 | RA4 — Port A bit 4 / analog input |
| Broche 6 | RA5 — Port A bit 5 / analog input |
| Broche 7 | RA6 — Port A bit 6 / analog input |
| Broche 8 | RA7 — Port A bit 7 / analog input |
| Broche 9 | RA8 — Port A bit 8 |
| Broche 10 | RA9 — Port A bit 9 |
| Broche 11 | RA10 — Port A bit 10 |
| Broche 12 | RA11 — Port A bit 11 |
| Broche 13 | RA12 — Port A bit 12 |
| Broche 14 | RA13 — Port A bit 13 |
| Broche 15 | RA14 — Port A bit 14 |
| Broche 16 | RA15 — Port A bit 15 |
| Broche 17 | VDD — Core supply voltage |
| Broche 18 | VSS — Ground reference |
| Broche 19 | RB0 — Port B bit 0 / analog input |
| Broche 20 | RB1 — Port B bit 1 / analog input |
| Broche 21 | RB2 — Port B bit 2 / analog input |
| Broche 22 | RB3 — Port B bit 3 / analog input |
| Broche 23 | RB4 — Port B bit 4 / analog input |
| Broche 24 | RB5 — Port B bit 5 / analog input |
| Broche 25 | RB6 — Port B bit 6 / analog input |
| Broche 26 | RB7 — Port B bit 7 / analog input |
| Broche 27 | RB8 — Port B bit 8 |
| Broche 28 | RB9 — Port B bit 9 |
| Broche 29 | RB10 — Port B bit 10 |
| Broche 30 | RB11 — Port B bit 11 |
| Broche 31 | RB12 — Port B bit 12 |
| Broche 32 | RB13 — Port B bit 13 |
| Broche 33 | RB14 — Port B bit 14 |
| Broche 34 | RB15 — Port B bit 15 |
| Broche 35 | VDD — I/O supply voltage |
| Broche 36 | VSS — Ground reference |
| Broche 37 | RC0 — Port C bit 0 |
| Broche 38 | RC1 — Port C bit 1 |
| Broche 39 | RC2 — Port C bit 2 |
| Broche 40 | RC3 — Port C bit 3 |
| Broche 41 | RC4 — Port C bit 4 |
| Broche 42 | RC5 — Port C bit 5 |
| Broche 43 | RC6 — Port C bit 6 |
| Broche 44 | RC7 — Port C bit 7 |
| Broche 45 | RC8 — Port C bit 8 |
| Broche 46 | RC9 — Port C bit 9 |
| Broche 47 | RC10 — Port C bit 10 |
| Broche 48 | RC11 — Port C bit 11 |
| Broche 49 | RC12 — Port C bit 12 |
| Broche 50 | RC13 — Port C bit 13 |
| Broche 51 | RC14 — Port C bit 14 |
| Broche 52 | RC15 — Port C bit 15 |
| Broche 53 | VDD — I/O supply voltage |
| Broche 54 | VSS — Ground reference |
| Broche 55 | RD0 — Port D bit 0 |
| Broche 56 | RD1 — Port D bit 1 |
| Broche 57 | RD2 — Port D bit 2 |
| Broche 58 | RD3 — Port D bit 3 |
| Broche 59 | RD4 — Port D bit 4 |
| Broche 60 | RD5 — Port D bit 5 |
| Broche 61 | RD6 — Port D bit 6 |
| Broche 62 | RD7 — Port D bit 7 |
| Broche 63 | RD8 — Port D bit 8 |
| Broche 64 | RD9 — Port D bit 9 |
| Broche 65 | RD10 — Port D bit 10 |
| Broche 66 | RD11 — Port D bit 11 |
| Broche 67 | RD12 — Port D bit 12 |
| Broche 68 | RD13 — Port D bit 13 |
| Broche 69 | RD14 — Port D bit 14 |
| Broche 70 | RD15 — Port D bit 15 |
| Broche 71 | VDD — I/O supply voltage |
| Broche 72 | VSS — Ground reference |
| Broche 73 | RE0 — Port E bit 0 |
| Broche 74 | RE1 — Port E bit 1 |
| Broche 75 | RE2 — Port E bit 2 |
| Broche 76 | RE3 — Port E bit 3 |
| Broche 77 | RE4 — Port E bit 4 |
| Broche 78 | RE5 — Port E bit 5 |
| Broche 79 | RE6 — Port E bit 6 |
| Broche 80 | RE7 — Port E bit 7 |
| Broche 81 | RE8 — Port E bit 8 |
| Broche 82 | RE9 — Port E bit 9 |
| Broche 83 | VDD — I/O supply voltage |
| Broche 84 | VSS — Ground reference |
| Broche 85 | RF0 — Port F bit 0 |
| Broche 86 | RF1 — Port F bit 1 |
| Broche 87 | RF2 — Port F bit 2 |
| Broche 88 | RF3 — Port F bit 3 |
| Broche 89 | RF4 — Port F bit 4 |
| Broche 90 | RF5 — Port F bit 5 |
| Broche 91 | RF6 — Port F bit 6 |
| Broche 92 | RF7 — Port F bit 7 |
| Broche 93 | RF8 — Port F bit 8 |
| Broche 94 | RF9 — Port F bit 9 |
| Broche 95 | RF10 — Port F bit 10 |
| Broche 96 | RF11 — Port F bit 11 |
| Broche 97 | RF12 — Port F bit 12 |
| Broche 98 | RF13 — Port F bit 13 |
| Broche 99 | VDD — I/O supply voltage |
| Broche 100 | VSS — Ground reference |
| Broche 101 | RG0 — Port G bit 0 |
| Broche 102 | RG1 — Port G bit 1 |
| Broche 103 | RG2 — Port G bit 2 |
| Broche 104 | RG3 — Port G bit 3 |
| Broche 105 | RG4 — Port G bit 4 |
| Broche 106 | RG5 — Port G bit 5 |
| Broche 107 | RG6 — Port G bit 6 |
| Broche 108 | RG7 — Port G bit 7 |
| Broche 109 | RG8 — Port G bit 8 |
| Broche 110 | RG9 — Port G bit 9 |
| Broche 111 | OSC1 — Crystal oscillator input |
| Broche 112 | OSC2 — Crystal oscillator output |
| Broche 113 | MCLR — Master clear / reset (active low) |
| Broche 114 | VDD — Core supply voltage |
| Broche 115 | VSS — Ground reference |
| Broche 116 | TRCLK — Trace clock (debug) |
| Broche 117 | TRD0 — Trace data 0 (debug) |
| Broche 118 | TRD1 — Trace data 1 (debug) |
| Broche 119 | TRD2 — Trace data 2 (debug) |
| Broche 120 | TRD3 — Trace data 3 (debug) |
| Broche 121 | DDM — USB D- data line |
| Broche 122 | DDP — USB D+ data line |
| Broche 123 | VUSB — USB transceiver supply |
| Broche 124 | VBUS — USB VBUS detect |
Applications typiques
PIC32MZ1024ECM124T-I/TL convient pour 6 applications: Industrial Ethernet Gateway, Connected IoT Sensor Hub, USB-to-CAN Bridge, Building Automation Controller, Embedded HMI / Touch Panel, Secure Point-of-Sale Terminal.
Industrial Ethernet Gateway
The PIC32MZ1024ECM124T-I/TL is a strong fit for industrial Ethernet gateways because it integrates a 10/100 MAC with MII/RMII plus a hardware crypto engine that offloads TLS/SSL handshakes from the CPU. At 200 MHz it sustains wire-rate processing of Modbus TCP, EtherNet/IP, or PROFINET frames while leaving cycles for protocol conversion. The 1 MB dual-panel Flash supports fail-safe OTA firmware updates in the field, and 512 KB of SRAM holds full TCP/IP stacks plus application buffers without external memory.
Recommandé
Connected IoT Sensor Hub
For connected IoT sensor hubs, the PIC32MZ1024ECM124T-I/TL provides 12-bit 18 MSPS ADC sampling up to 48 analog channels, on-chip AES/SHA crypto, and USB 2.0 High-Speed OTG for local diagnostics. The 9-channel DMA controller streams sensor data to memory without CPU intervention, leaving the 200 MHz core free for edge analytics. Industrial -40C to +85C operation lets the same part serve factory-floor and outdoor enclosures without re-qualification.
Recommandé
USB-to-CAN Bridge
The PIC32MZ1024ECM124T-I/TL is well suited to USB-to-CAN bridge designs because it combines USB 2.0 High-Speed OTG with dual independent CAN 2.0b controllers on the same die. At 200 MHz the core can repackage USB-CDC frames into CAN messages with deterministic latency, and the 512 KB SRAM buffers both buses without external memory. Industrial temperature rating supports under-hood automotive and machinery deployments where vibration and thermal stress are common.
Recommandé
Building Automation Controller
Building-automation controllers benefit from the PIC32MZ1024ECM124T-I/TL's mix of Ethernet, dual CAN, multiple UART/SPI/I2C, and 97 programmable I/O lines, which cover BACnet/IP, KNX, Modbus, and proprietary field-bus stacks in one device. The 1 MB dual-panel Flash allows secure OTA updates of building firmware, and the hardware crypto engine authenticates remote management sessions. The 124-VTLA 9x9 mm footprint fits compact DIN-rail enclosures while leaving room for optoisolated field wiring.
Recommandé
Embedded HMI / Touch Panel
The PIC32MZ1024ECM124T-I/TL drives small to medium HMI panels by pairing the 200 MHz core with the 12-bit ADC for touch sensing and a parallel interface for TFT displays up to WVGA resolution. The 1 MB Flash stores graphics assets and fonts, while 512 KB of SRAM holds frame buffers without external memory. Industrial temperature rating and the on-chip crypto engine also suit secure operator-interface panels on factory floors.
Recommandé
Secure Point-of-Sale Terminal
Point-of-sale terminals leverage the PIC32MZ1024ECM124T-I/TL's hardware AES/3DES/SHA engine to accelerate PIN encryption and EMV transaction processing, while the 200 MHz MIPS32 microAptiv core handles the application logic and display. The 1 MB dual-panel Flash supports signed firmware updates for PCI compliance, and 512 KB of SRAM holds transaction buffers. USB 2.0 High-Speed OTG plus Ethernet give flexible back-office connectivity for retail deployments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ1024ECM124T-I/TL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ1024ECM124-I/TL | PIC32MZ1024ECH124-I/TL | PIC32MZ1024ECM124T-E/TL | PIC32MZ1024EFM124T-I/TL | PIC32MZ0512EFK124T-I/TL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) |
| Core Family | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EF (microAptiv) | PIC32MZ EF (microAptiv) |
| Max CPU Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 252 MHz (+26%) | 252 MHz (+26%) |
| Flash | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 512 KB (-50%) |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 128 KB (-75%) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +125C (Extended) | -40C to +85C | -40C to +85C |
| Packaging | Tape & Reel | Tray | Tray | Tape & Reel | Tape & Reel | Tape & Reel |
Principaux différenciateurs
- Drop-in tray-pack alternative with identical die (vs PIC32MZ1024ECM124-I/TL)
- Pin-compatible upgrade path to 252 MHz EF family (vs PIC32MZ1024EFM124T-I/TL)
- Extended-temperature variant on same footprint (vs PIC32MZ1024ECM124T-E/TL)
Notes de conception
The 124-VTLA package uses a land-grid-array pad layout under the package body. Follow Microchip's recommended VTLA-124 land pattern from the package specification document; deviations cause solder shorts under the body. Place a 4u7 + 100 nF bypass pair on every VDD/VSS pin pair, and route the 50 ohm Ethernet MII/RMII traces as impedance-controlled differential pairs with a continuous ground reference plane beneath.
The PIC32MZ1024ECM124T-I/TL has separate core and I/O supply domains. Decouple VDD (core) and the I/O supply rails with independent ferrite beads or LC filters, and bulk-decouple the VUSB rail with at least 10 uF to meet USB 2.0 High-Speed OTG inrush requirements. Hold the MCLR pin high through a 10 kohm pull-up and a 100 nF cap to ground to ensure clean resets.
At 200 MHz the MIPS32 microAptiv core emits switching noise with significant harmonic content above 100 MHz. Keep high-speed traces under 25 mm, use 4-layer stack-up with continuous ground, and avoid routing Ethernet signals across split planes. For RMII to an external PHY like the LAN8742A, match trace lengths within 50 mil to preserve the 50 MHz reference clock duty cycle.
Informations de conformité
RoHS and REACH compliant per Microchip product page; industrial -40C to +85C temperature grade (-I suffix); no AEC-Q100 automotive qualification on this part number.
