PIC32MZ1024ECM124T-I/TL - 200MHz 32-bit MCU 1MB Flash | Microchip
Артикул: PIC32MZ1024ECM124T-I/TL ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $13.42 | $13,42 |
| 10 | $12.08 | $120,80 |
| 100 | $10.73 | $1.073,00 |
| 500 | $9.39 | $4.695,00 |
| 1.000 | $8.4 | $8.400,00 |
PIC32MZ1024ECM124T-I/TL Обзор
A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling higher code density, larger addressable memory, and richer peripheral integration than 8-bit or 16-bit MCUs. Within the broader taxonomy, this PIC32MZ1024ECM124 sits inside the microcontroller class of embedded processors, which itself belongs to the semiconductor integrated circuit (IC) family and is used for real-time control, connectivity, and human-machine interface (HMI) subsystems. The EC suffix denotes the Embedded Connectivity sub-family, which adds Ethernet, USB, CAN, and crypto accelerators optimized for connected industrial and IoT designs.
Key features of the PIC32MZ1024ECM124T-I/TL include a MIPS32 microAptiv core with hardware multiply/divide, 16 KB I-cache and 4 KB D-cache, a 12-bit 18 MSPS ADC with up to 48 analog inputs, dual CAN 2.0b controllers, 10/100 Ethernet MAC with MII/RMII interface, USB 2.0 high-speed OTG, a hardware crypto engine (AES, 3DES, SHA, MD5, RNG), and multiple UART, SPI, I2C, and I2S peripherals. The part also integrates a 9-channel DMA controller and supports up to 97 programmable I/O lines, with industrial-grade -40C to +85C operation (I temperature grade).
The architecture combines a 5-stage pipeline MIPS core with tightly-coupled SRAM and dual-bank Flash for live firmware updates. The on-chip crypto and connectivity peripherals offload networking stacks and TLS/SSL handshakes from the CPU, freeing cycles for application logic. Compared with the older PIC32MX series, the PIC32MZ EC family offers roughly 4x the CoreMark/MHz and a substantially richer connectivity peripheral set, while sharing the MPLAB X IDE and Harmony framework toolchain for code reuse.
Typical applications include industrial Ethernet gateways, secure connected sensors, building-automation controllers, USB-CAN bridges, and embedded HMI panels. The wide peripheral mix also suits motor-control front-ends, point-of-sale terminals, and connected medical instrumentation where deterministic real-time response is required.
When designing with this part, follow the VTLA 9x9 mm PCB land pattern, route the Ethernet MII/RMII traces as impedance-controlled 50 ohm differential pairs, and provide bulk + bypass capacitors close to every supply pin. Always validate crypto library versions against the latest MPLAB Harmony release for FIPS-relevant builds.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone.
Аналоги без доработки для PIC32MZ1024ECM124T-I/TL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PIC32MZ1024ECM124T-I/TL (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Package, ADC, Crypto Engine, DMA Channels.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
PIC32MZ1024ECM124-I/TL
✅ Прямая замена✓ В наличии
$7.85 / шт.
Открыть даташит →PIC32MZ1024ECH124-I/TL
✅ Прямая замена✓ В наличии
$9.3 / шт.
Открыть даташит →PIC32MZ1024ECM124T-E/TL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MZ1024EFM124T-I/TL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PIC32MZ0512EFK124T-I/TL
✅ Прямая замена✓ В наличии
$6.12 / шт.
Открыть даташит →PIC32MZ1024ECM124T-I/TL Максимальные параметры и электрические характеристики
| Core Architecture | MIPS32 microAptiv (PIC32) |
| Core Width | 32-bit |
| Maximum CPU Clock | 200 MHz |
| Performance | 330 DMIPS, 3.28 CoreMark/MHz |
| Program Memory (Flash) | 1 MB (1024 KB) |
| SRAM | 512 KB |
| Instruction Cache | 16 KB |
| Data Cache | 4 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Рабочая температура | -40C to +85C (Industrial) |
| I/O Pins | 97 programmable |
| ADC | 12-bit, 18 MSPS, up to 48 channels |
| Ethernet | 10/100 MAC with MII/RMII |
| USB | USB 2.0 High-Speed OTG |
| CAN | 2x CAN 2.0b |
| Crypto Engine | AES, 3DES, SHA, MD5, RNG |
| DMA Channels | 9 |
| Корпус | 124-VTLA (9x9 mm, 0.9 mm height) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Конфигурация выводов PIC32MZ1024ECM124T-I/TL
| Контакт 1 | RA0 — Port A bit 0 / analog input |
| Контакт 2 | RA1 — Port A bit 1 / analog input |
| Контакт 3 | RA2 — Port A bit 2 / analog input |
| Контакт 4 | RA3 — Port A bit 3 / analog input |
| Контакт 5 | RA4 — Port A bit 4 / analog input |
| Контакт 6 | RA5 — Port A bit 5 / analog input |
| Контакт 7 | RA6 — Port A bit 6 / analog input |
| Контакт 8 | RA7 — Port A bit 7 / analog input |
| Контакт 9 | RA8 — Port A bit 8 |
| Контакт 10 | RA9 — Port A bit 9 |
| Контакт 11 | RA10 — Port A bit 10 |
| Контакт 12 | RA11 — Port A bit 11 |
| Контакт 13 | RA12 — Port A bit 12 |
| Контакт 14 | RA13 — Port A bit 13 |
| Контакт 15 | RA14 — Port A bit 14 |
| Контакт 16 | RA15 — Port A bit 15 |
| Контакт 17 | VDD — Core supply voltage |
| Контакт 18 | VSS — Ground reference |
| Контакт 19 | RB0 — Port B bit 0 / analog input |
| Контакт 20 | RB1 — Port B bit 1 / analog input |
| Контакт 21 | RB2 — Port B bit 2 / analog input |
| Контакт 22 | RB3 — Port B bit 3 / analog input |
| Контакт 23 | RB4 — Port B bit 4 / analog input |
| Контакт 24 | RB5 — Port B bit 5 / analog input |
| Контакт 25 | RB6 — Port B bit 6 / analog input |
| Контакт 26 | RB7 — Port B bit 7 / analog input |
| Контакт 27 | RB8 — Port B bit 8 |
| Контакт 28 | RB9 — Port B bit 9 |
| Контакт 29 | RB10 — Port B bit 10 |
| Контакт 30 | RB11 — Port B bit 11 |
| Контакт 31 | RB12 — Port B bit 12 |
| Контакт 32 | RB13 — Port B bit 13 |
| Контакт 33 | RB14 — Port B bit 14 |
| Контакт 34 | RB15 — Port B bit 15 |
| Контакт 35 | VDD — I/O supply voltage |
| Контакт 36 | VSS — Ground reference |
| Контакт 37 | RC0 — Port C bit 0 |
| Контакт 38 | RC1 — Port C bit 1 |
| Контакт 39 | RC2 — Port C bit 2 |
| Контакт 40 | RC3 — Port C bit 3 |
| Контакт 41 | RC4 — Port C bit 4 |
| Контакт 42 | RC5 — Port C bit 5 |
| Контакт 43 | RC6 — Port C bit 6 |
| Контакт 44 | RC7 — Port C bit 7 |
| Контакт 45 | RC8 — Port C bit 8 |
| Контакт 46 | RC9 — Port C bit 9 |
| Контакт 47 | RC10 — Port C bit 10 |
| Контакт 48 | RC11 — Port C bit 11 |
| Контакт 49 | RC12 — Port C bit 12 |
| Контакт 50 | RC13 — Port C bit 13 |
| Контакт 51 | RC14 — Port C bit 14 |
| Контакт 52 | RC15 — Port C bit 15 |
| Контакт 53 | VDD — I/O supply voltage |
| Контакт 54 | VSS — Ground reference |
| Контакт 55 | RD0 — Port D bit 0 |
| Контакт 56 | RD1 — Port D bit 1 |
| Контакт 57 | RD2 — Port D bit 2 |
| Контакт 58 | RD3 — Port D bit 3 |
| Контакт 59 | RD4 — Port D bit 4 |
| Контакт 60 | RD5 — Port D bit 5 |
| Контакт 61 | RD6 — Port D bit 6 |
| Контакт 62 | RD7 — Port D bit 7 |
| Контакт 63 | RD8 — Port D bit 8 |
| Контакт 64 | RD9 — Port D bit 9 |
| Контакт 65 | RD10 — Port D bit 10 |
| Контакт 66 | RD11 — Port D bit 11 |
| Контакт 67 | RD12 — Port D bit 12 |
| Контакт 68 | RD13 — Port D bit 13 |
| Контакт 69 | RD14 — Port D bit 14 |
| Контакт 70 | RD15 — Port D bit 15 |
| Контакт 71 | VDD — I/O supply voltage |
| Контакт 72 | VSS — Ground reference |
| Контакт 73 | RE0 — Port E bit 0 |
| Контакт 74 | RE1 — Port E bit 1 |
| Контакт 75 | RE2 — Port E bit 2 |
| Контакт 76 | RE3 — Port E bit 3 |
| Контакт 77 | RE4 — Port E bit 4 |
| Контакт 78 | RE5 — Port E bit 5 |
| Контакт 79 | RE6 — Port E bit 6 |
| Контакт 80 | RE7 — Port E bit 7 |
| Контакт 81 | RE8 — Port E bit 8 |
| Контакт 82 | RE9 — Port E bit 9 |
| Контакт 83 | VDD — I/O supply voltage |
| Контакт 84 | VSS — Ground reference |
| Контакт 85 | RF0 — Port F bit 0 |
| Контакт 86 | RF1 — Port F bit 1 |
| Контакт 87 | RF2 — Port F bit 2 |
| Контакт 88 | RF3 — Port F bit 3 |
| Контакт 89 | RF4 — Port F bit 4 |
| Контакт 90 | RF5 — Port F bit 5 |
| Контакт 91 | RF6 — Port F bit 6 |
| Контакт 92 | RF7 — Port F bit 7 |
| Контакт 93 | RF8 — Port F bit 8 |
| Контакт 94 | RF9 — Port F bit 9 |
| Контакт 95 | RF10 — Port F bit 10 |
| Контакт 96 | RF11 — Port F bit 11 |
| Контакт 97 | RF12 — Port F bit 12 |
| Контакт 98 | RF13 — Port F bit 13 |
| Контакт 99 | VDD — I/O supply voltage |
| Контакт 100 | VSS — Ground reference |
| Контакт 101 | RG0 — Port G bit 0 |
| Контакт 102 | RG1 — Port G bit 1 |
| Контакт 103 | RG2 — Port G bit 2 |
| Контакт 104 | RG3 — Port G bit 3 |
| Контакт 105 | RG4 — Port G bit 4 |
| Контакт 106 | RG5 — Port G bit 5 |
| Контакт 107 | RG6 — Port G bit 6 |
| Контакт 108 | RG7 — Port G bit 7 |
| Контакт 109 | RG8 — Port G bit 8 |
| Контакт 110 | RG9 — Port G bit 9 |
| Контакт 111 | OSC1 — Crystal oscillator input |
| Контакт 112 | OSC2 — Crystal oscillator output |
| Контакт 113 | MCLR — Master clear / reset (active low) |
| Контакт 114 | VDD — Core supply voltage |
| Контакт 115 | VSS — Ground reference |
| Контакт 116 | TRCLK — Trace clock (debug) |
| Контакт 117 | TRD0 — Trace data 0 (debug) |
| Контакт 118 | TRD1 — Trace data 1 (debug) |
| Контакт 119 | TRD2 — Trace data 2 (debug) |
| Контакт 120 | TRD3 — Trace data 3 (debug) |
| Контакт 121 | DDM — USB D- data line |
| Контакт 122 | DDP — USB D+ data line |
| Контакт 123 | VUSB — USB transceiver supply |
| Контакт 124 | VBUS — USB VBUS detect |
Типичное применение
PIC32MZ1024ECM124T-I/TL подходит для 6 применениеs: Industrial Ethernet Gateway, Connected IoT Sensor Hub, USB-to-CAN Bridge, Building Automation Controller, Embedded HMI / Touch Panel, Secure Point-of-Sale Terminal.
Industrial Ethernet Gateway
The PIC32MZ1024ECM124T-I/TL is a strong fit for industrial Ethernet gateways because it integrates a 10/100 MAC with MII/RMII plus a hardware crypto engine that offloads TLS/SSL handshakes from the CPU. At 200 MHz it sustains wire-rate processing of Modbus TCP, EtherNet/IP, or PROFINET frames while leaving cycles for protocol conversion. The 1 MB dual-panel Flash supports fail-safe OTA firmware updates in the field, and 512 KB of SRAM holds full TCP/IP stacks plus application buffers without external memory.
Рекомендуется
Connected IoT Sensor Hub
For connected IoT sensor hubs, the PIC32MZ1024ECM124T-I/TL provides 12-bit 18 MSPS ADC sampling up to 48 analog channels, on-chip AES/SHA crypto, and USB 2.0 High-Speed OTG for local diagnostics. The 9-channel DMA controller streams sensor data to memory without CPU intervention, leaving the 200 MHz core free for edge analytics. Industrial -40C to +85C operation lets the same part serve factory-floor and outdoor enclosures without re-qualification.
Рекомендуется
USB-to-CAN Bridge
The PIC32MZ1024ECM124T-I/TL is well suited to USB-to-CAN bridge designs because it combines USB 2.0 High-Speed OTG with dual independent CAN 2.0b controllers on the same die. At 200 MHz the core can repackage USB-CDC frames into CAN messages with deterministic latency, and the 512 KB SRAM buffers both buses without external memory. Industrial temperature rating supports under-hood automotive and machinery deployments where vibration and thermal stress are common.
Рекомендуется
Building Automation Controller
Building-automation controllers benefit from the PIC32MZ1024ECM124T-I/TL's mix of Ethernet, dual CAN, multiple UART/SPI/I2C, and 97 programmable I/O lines, which cover BACnet/IP, KNX, Modbus, and proprietary field-bus stacks in one device. The 1 MB dual-panel Flash allows secure OTA updates of building firmware, and the hardware crypto engine authenticates remote management sessions. The 124-VTLA 9x9 mm footprint fits compact DIN-rail enclosures while leaving room for optoisolated field wiring.
Рекомендуется
Embedded HMI / Touch Panel
The PIC32MZ1024ECM124T-I/TL drives small to medium HMI panels by pairing the 200 MHz core with the 12-bit ADC for touch sensing and a parallel interface for TFT displays up to WVGA resolution. The 1 MB Flash stores graphics assets and fonts, while 512 KB of SRAM holds frame buffers without external memory. Industrial temperature rating and the on-chip crypto engine also suit secure operator-interface panels on factory floors.
Рекомендуется
Secure Point-of-Sale Terminal
Point-of-sale terminals leverage the PIC32MZ1024ECM124T-I/TL's hardware AES/3DES/SHA engine to accelerate PIN encryption and EMV transaction processing, while the 200 MHz MIPS32 microAptiv core handles the application logic and display. The 1 MB dual-panel Flash supports signed firmware updates for PCI compliance, and 512 KB of SRAM holds transaction buffers. USB 2.0 High-Speed OTG plus Ethernet give flexible back-office connectivity for retail deployments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PIC32MZ1024ECM124T-I/TL — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PIC32MZ1024ECM124-I/TL | PIC32MZ1024ECH124-I/TL | PIC32MZ1024ECM124T-E/TL | PIC32MZ1024EFM124T-I/TL | PIC32MZ0512EFK124T-I/TL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) |
| Core Family | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EF (microAptiv) | PIC32MZ EF (microAptiv) |
| Max CPU Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 252 MHz (+26%) | 252 MHz (+26%) |
| Flash | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 512 KB (-50%) |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 128 KB (-75%) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +125C (Extended) | -40C to +85C | -40C to +85C |
| Packaging | Tape & Reel | Tray | Tray | Tape & Reel | Tape & Reel | Tape & Reel |
Ключевые отличия
- Drop-in tray-pack alternative with identical die (против PIC32MZ1024ECM124-I/TL)
- Pin-compatible upgrade path to 252 MHz EF family (против PIC32MZ1024EFM124T-I/TL)
- Extended-temperature variant on same footprint (против PIC32MZ1024ECM124T-E/TL)
Заметки по проектированию
The 124-VTLA package uses a land-grid-array pad layout under the package body. Follow Microchip's recommended VTLA-124 land pattern from the package specification document; deviations cause solder shorts under the body. Place a 4u7 + 100 nF bypass pair on every VDD/VSS pin pair, and route the 50 ohm Ethernet MII/RMII traces as impedance-controlled differential pairs with a continuous ground reference plane beneath.
The PIC32MZ1024ECM124T-I/TL has separate core and I/O supply domains. Decouple VDD (core) and the I/O supply rails with independent ferrite beads or LC filters, and bulk-decouple the VUSB rail with at least 10 uF to meet USB 2.0 High-Speed OTG inrush requirements. Hold the MCLR pin high through a 10 kohm pull-up and a 100 nF cap to ground to ensure clean resets.
At 200 MHz the MIPS32 microAptiv core emits switching noise with significant harmonic content above 100 MHz. Keep high-speed traces under 25 mm, use 4-layer stack-up with continuous ground, and avoid routing Ethernet signals across split planes. For RMII to an external PHY like the LAN8742A, match trace lengths within 50 mil to preserve the 50 MHz reference clock duty cycle.
Информация о соответствии
RoHS and REACH compliant per Microchip product page; industrial -40C to +85C temperature grade (-I suffix); no AEC-Q100 automotive qualification on this part number.
