PIC32MZ2048EFG144-E/PH - 32-bit 180MHz MCU 2MB Flash | Microchip
N.º da peça: PIC32MZ2048EFG144-E/PH ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $11.32 | $11,32 |
| 10 | $10.47 | $104,70 |
| 100 | $9.05 | $905,00 |
| 500 | $8.2 | $4.100,00 |
| 1.000 | $7.45 | $7.450,00 |
PIC32MZ2048EFG144-E/PH Visão geral
A 32-bit microcontroller (MCU) is an integrated computing system on a single chip combining a CPU core, program memory (Flash), working memory (SRAM), peripherals, and I/O. In the broader semiconductor taxonomy, MCUs belong to the embedded processor family alongside microprocessors, DSPs, and SoCs, and within that family the PIC32MZ EF series occupies the high-performance connectivity tier targeting industrial, IoT, automotive infotainment, HMI/graphics, and motor-control segments. The EFG variant specifically adds HS USB, Ethernet MAC, and graphics interfaces without CAN or crypto engines.
Key features include 2 MB of Live-Update Flash with dual-panel architecture, 512 KB SRAM, HS USB 2.0 Host/Device/OTG, 10/100 Mbps Ethernet MAC with MII/RMII interfaces, up to 12-bit 18 MSPS ADC, multiple UART/SPI/I2C peripherals, a parallel master port (PMP) for graphics, and an integrated FPU enabling fast single- and double-precision IEEE 754 math. The device supports a wide operating voltage range (2.3V to 3.6V core, 3.0V to 3.6V analog) suitable for battery-backed industrial designs.
Architecturally, the PIC32MZ EF family pairs the M-class MIPS core with dedicated FPU and DSP pipelines, four 64-bit accumulators for saturating and fractional arithmetic, and a high-bandwidth crossbar fabric for zero-wait-state peripheral access. Dual-panel Flash allows concurrent code execution from one panel while the other is being updated, enabling fail-safe firmware upgrades critical for industrial and IoT deployments.
Typical applications include industrial IoT gateways with Ethernet and HS USB connectivity, automotive HMI/infotainment systems with TFT-LCD graphics, motor control FOCs for BLDC/PMSM drives, secure connected home automation hubs, and high-performance medical instrument controllers. Designers select this part when deterministic floating-point math plus rich wired connectivity are required.
When designing with the PIC32MZ2048EFG144-E/PH, decouple all VDD/VBAT/AVDD rails with bulk tantalum and 0.1uF/10nF ceramics, route the high-speed USB differential pair with 90-ohm impedance, place the 12 MHz primary crystal within 5 mm of the OSC pins with guard traces, and verify DMIPS/FPU sustained throughput against your interrupt budget before final commit.
This page synthesizes distributor stock data, parametric drop-in alternatives from the PIC32MZ family, and practical design considerations that extend beyond the manufacturer datasheet, giving procurement and design engineers a faster procurement-to-prototype workflow.
Alternativas drop-in para PIC32MZ2048EFG144-E/PH — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MZ2048EFG144-E/PH (mesmo formato e footprint) — diferindo em Core Architecture, Package, USB, ADC, CAN.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MZ2048EFM144-E/PH
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ2048EFH144-E/PH
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ2048EFK144-E/PH
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ2048ECM144-I/PH
✅ Drop-In✓ Em estoque
$6.62 / unidade
Ver ficha técnica →PIC32MZ1024EFG144-E/PH
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ0512EFG144-E/PH
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ2048EFG144-E/PH Classificações máximas e características elétricas
| Manufacturer | Microchip Technology |
| Family | PIC32MZ EF (Embedded Connectivity with FPU) |
| Core | MIPS32 M-Class (Warrior) |
| Core Architecture | MIPS Warrior M-class with DSP enhancement |
| FPU | IEEE 754-compliant hardware FPU (single & double precision) |
| Maximum CPU Speed | 200 MHz |
| DMIPS Performance | 330 DMIPS |
| Program Memory (Flash) | 2 MB (2M x 8), dual-panel Live Update |
| SRAM | 512 KB |
| Operating Voltage (VDD) | 2.3 V to 3.6 V |
| Analog Supply (AVDD) | 3.0 V to 3.6 V |
| Faixa de temperatura de operação | -40C to +125C (E = Automotive) |
| Encapsulamento | 144-lead TQFP (16x16 mm), PH suffix |
| Tipo de montagem | Surface Mount |
| USB | HS USB 2.0 Host/Device/OTG |
| Ethernet | 10/100 Mbps MAC with MII/RMII |
| ADC | Up to 12-bit 18 MSPS |
| Status RoHS | Compliant |
| Nível MSL | 3 (per JEDEC J-STD-020, typical for TQFP-144) |
| Automotive Grade | Yes - E temperature grade (AEC-Q100 qualified) |
| Crypto Engine | Not included (EFG variant) |
| CAN | Not included (EFG variant) |
Configuração de pinos do PIC32MZ2048EFG144-E/PH
| Pino 1 | OSC1/CLKI/RCGC1 — Primary oscillator input / external clock input |
| Pino 2 | OSC2/CLKO/RCGC2 — Primary oscillator output |
| Pino 3 | VDD — Core logic supply (2.3V-3.6V) |
| Pino 4 | VSS — Ground reference for core logic |
| Pino 5 | AN0/CVD0/RPG0 — Analog input 0 / CVD pad |
| Pino 6 | AN1/CVD1/RPG1 — Analog input 1 / CVD pad |
| Pino 7 | AN2/CVD2/RPG2 — Analog input 2 / CVD pad |
| Pino 8 | AN3/CVD3/RPG3 — Analog input 3 / CVD pad |
| Pino 9 | AVDD — Analog supply (3.0V-3.6V) |
| Pino 10 | AVSS — Analog ground |
| Pino 11 | TMS — JTAG test mode select |
| Pino 12 | TCK — JTAG test clock |
| Pino 13 | TDI — JTAG test data input |
| Pino 14 | TDO — JTAG test data output |
| Pino 15 | VBUS — USB VBUS detect (5V tolerant) |
| Pino 16 | VDD — Core logic supply |
| Pino 17 | VSS — Ground reference |
| Pino 18 | D+ — USB D+ data line |
| Pino 19 | D- — USB D- data line |
| Pino 20 | VBAT — Battery backup supply for RTCC |
| Pino 21 | RTCC — Real-time clock calendar output |
| Pino 22 | RPF0/ETXD0 — Port F bit 0 / Ethernet TXD0 |
| Pino 23 | RPF1/ETXD1 — Port F bit 1 / Ethernet TXD1 |
| Pino 24 | RPF2/ETXEN — Port F bit 2 / Ethernet TXEN |
| Pino 25 | RPF3/ERXD0 — Port F bit 3 / Ethernet RXD0 |
| Pino 26 | RPF4/ERXD1 — Port F bit 4 / Ethernet RXD1 |
| Pino 27 | RPF5/EMDC — Port F bit 5 / Ethernet MDC |
| Pino 28 | VDD — Core logic supply |
| Pino 29 | VSS — Ground reference |
| Pino 30 | RPF8/ECRS — Port F bit 8 / Ethernet CRS |
| Pino 31 | RPF12/EREF_CLK — Port F bit 12 / Ethernet reference clock |
| Pino 32 | RPC0 — Port C bit 0 |
| Pino 33 | RPC1 — Port C bit 1 |
| Pino 34 | RPC2 — Port C bit 2 |
| Pino 35 | RPC3 — Port C bit 3 |
| Pino 36 | RPC4 — Port C bit 4 |
| Pino 37 | RPC5 — Port C bit 5 |
| Pino 38 | RPC6 — Port C bit 6 |
| Pino 39 | RPC7 — Port C bit 7 |
| Pino 40 | VDD — Core logic supply |
| Pino 41 | VSS — Ground reference |
| Pino 42 | RPC8 — Port C bit 8 |
| Pino 43 | RPC9 — Port C bit 9 |
| Pino 44 | RPD0/PMD0 — Port D bit 0 / PMP data 0 |
| Pino 45 | RPD1/PMD1 — Port D bit 1 / PMP data 1 |
| Pino 46 | RPD2/PMD2 — Port D bit 2 / PMP data 2 |
| Pino 47 | RPD3/PMD3 — Port D bit 3 / PMP data 3 |
| Pino 48 | RPD4/PMD4 — Port D bit 4 / PMP data 4 |
| Pino 49 | RPD5/PMD5 — Port D bit 5 / PMP data 5 |
| Pino 50 | RPD6/PMD6 — Port D bit 6 / PMP data 6 |
| Pino 51 | RPD7/PMD7 — Port D bit 7 / PMP data 7 |
| Pino 52 | VDD — Core logic supply |
| Pino 53 | VSS — Ground reference |
| Pino 54 | RPD8/PMD8 — Port D bit 8 / PMP data 8 |
| Pino 55 | RPD9/PMD9 — Port D bit 9 / PMP data 9 |
| Pino 56 | RPD10/PMD10 — Port D bit 10 / PMP data 10 |
| Pino 57 | RPD11/PMD11 — Port D bit 11 / PMP data 11 |
| Pino 58 | RPD12/PMD12 — Port D bit 12 / PMP data 12 |
| Pino 59 | RPD13/PMD13 — Port D bit 13 / PMP data 13 |
| Pino 60 | RPD14/PMD14 — Port D bit 14 / PMP data 14 |
| Pino 61 | RPD15/PMD15 — Port D bit 15 / PMP data 15 |
| Pino 62 | VDD — Core logic supply |
| Pino 63 | VSS — Ground reference |
| Pino 64 | RPE0/PMWR — Port E bit 0 / PMP write strobe |
| Pino 65 | RPE1/PMRD — Port E bit 1 / PMP read strobe |
| Pino 66 | RPE2/PMCS1 — Port E bit 2 / PMP chip select 1 |
| Pino 67 | RPE3/PMCS2 — Port E bit 3 / PMP chip select 2 |
| Pino 68 | RPE4/PMA0 — Port E bit 4 / PMP address 0 |
| Pino 69 | RPE5/PMA1 — Port E bit 5 / PMP address 1 |
| Pino 70 | RPE6/PMA2 — Port E bit 6 / PMP address 2 |
| Pino 71 | RPE7/PMA3 — Port E bit 7 / PMP address 3 |
| Pino 72 | RPE8/PMA4 — Port E bit 8 / PMP address 4 |
| Pino 73 | RPE9/PMA5 — Port E bit 9 / PMP address 5 |
| Pino 74 | VDD — Core logic supply |
| Pino 75 | VSS — Ground reference |
| Pino 76 | RPE10/PMA6 — Port E bit 10 / PMP address 6 |
| Pino 77 | RPE11/PMA7 — Port E bit 11 / PMP address 7 |
| Pino 78 | RPE12/PMA8 — Port E bit 12 / PMP address 8 |
| Pino 79 | RPE13/PMA9 — Port E bit 13 / PMP address 9 |
| Pino 80 | RPA0 — Port A bit 0 |
| Pino 81 | RPA1 — Port A bit 1 |
| Pino 82 | RPA2 — Port A bit 2 |
| Pino 83 | RPA3 — Port A bit 3 |
| Pino 84 | RPA4 — Port A bit 4 |
| Pino 85 | RPA5 — Port A bit 5 |
| Pino 86 | RPA6 — Port A bit 6 |
| Pino 87 | RPA7 — Port A bit 7 |
| Pino 88 | VDD — Core logic supply |
| Pino 89 | VSS — Ground reference |
| Pino 90 | RPA8 — Port A bit 8 |
| Pino 91 | RPA9 — Port A bit 9 |
| Pino 92 | RPA10 — Port A bit 10 |
| Pino 93 | RPA11 — Port A bit 11 |
| Pino 94 | RPA12 — Port A bit 12 |
| Pino 95 | RPA13 — Port A bit 13 |
| Pino 96 | RPA14 — Port A bit 14 |
| Pino 97 | RPA15 — Port A bit 15 |
| Pino 98 | RPB0/PMA10 — Port B bit 0 / PMP address 10 |
| Pino 99 | RPB1/PMA11 — Port B bit 1 / PMP address 11 |
| Pino 100 | RPB2/PMA12 — Port B bit 2 / PMP address 12 |
| Pino 101 | RPB3/PMA13 — Port B bit 3 / PMP address 13 |
| Pino 102 | VDD — Core logic supply |
| Pino 103 | VSS — Ground reference |
| Pino 104 | RPB4/PMA14 — Port B bit 4 / PMP address 14 |
| Pino 105 | RPB5/PMA15 — Port B bit 5 / PMP address 15 |
| Pino 106 | RPB6 — Port B bit 6 |
| Pino 107 | RPB7 — Port B bit 7 |
| Pino 108 | RPB8 — Port B bit 8 |
| Pino 109 | RPB9 — Port B bit 9 |
| Pino 110 | RPB10 — Port B bit 10 |
| Pino 111 | RPB11 — Port B bit 11 |
| Pino 112 | RPB12 — Port B bit 12 |
| Pino 113 | RPB13 — Port B bit 13 |
| Pino 114 | RPB14 — Port B bit 14 |
| Pino 115 | RPB15 — Port B bit 15 |
| Pino 116 | VDD — Core logic supply |
| Pino 117 | VSS — Ground reference |
| Pino 118 | RPG6 — Port G bit 6 |
| Pino 119 | RPG7 — Port G bit 7 |
| Pino 120 | RPG8 — Port G bit 8 |
| Pino 121 | RPG9 — Port G bit 9 |
| Pino 122 | VSS — Ground reference |
| Pino 123 | TRCLK — Trace clock output |
| Pino 124 | TRD0 — Trace data 0 |
| Pino 125 | TRD1 — Trace data 1 |
| Pino 126 | TRD2 — Trace data 2 |
| Pino 127 | TRD3 — Trace data 3 |
| Pino 128 | VDD — Core logic supply |
| Pino 129 | VSS — Ground reference |
| Pino 130 | AN4 — Analog input 4 |
| Pino 131 | AN5 — Analog input 5 |
| Pino 132 | AN6 — Analog input 6 |
| Pino 133 | AN7 — Analog input 7 |
| Pino 134 | AN8 — Analog input 8 |
| Pino 135 | AN9 — Analog input 9 |
| Pino 136 | AN10 — Analog input 10 |
| Pino 137 | AN11 — Analog input 11 |
| Pino 138 | AVDD — Analog supply (3.0V-3.6V) |
| Pino 139 | AVSS — Analog ground |
| Pino 140 | AN12 — Analog input 12 |
| Pino 141 | AN13 — Analog input 13 |
| Pino 142 | AN14 — Analog input 14 |
| Pino 143 | AN15 — Analog input 15 |
| Pino 144 | MCLR — Master clear (reset, active-low) |
Aplicações típicas
PIC32MZ2048EFG144-E/PH é adequado para 6 aplicaçãos: Industrial IoT Gateway, Automotive HMI / Infotainment Graphics, Motor Control (BLDC/PMSM FOC), Connected Home / Building Automation Hub, High-Performance Medical Instrumentation, Industrial Ethernet Edge Controller.
Industrial IoT Gateway
The PIC32MZ2048EFG144-E/PH is purpose-built for industrial IoT gateways: its 200 MHz MIPS Warrior core with IEEE 754 hardware FPU executes TCP/IP, TLS, and MQTT stacks in real time, while 2 MB of dual-panel Flash supports full network stacks plus application code with live update capability. The integrated 10/100 Ethernet MAC and HS USB 2.0 Host/Device provide both wired uplink and local peripheral connectivity. Designers place this MCU between a sensor HAT and the cloud broker, sustaining 330 DMIPS throughput even under heavy interrupt load. Compared to STM32F4 alternatives, the PIC32MZ EF offers more Flash, more SRAM, and Ethernet integrated on-chip at this temperature grade.
Recomendado
Automotive HMI / Infotainment Graphics
The PIC32MZ2048EFG144-E/PH drives automotive HMI/infotainment TFT-LCD panels through its integrated Parallel Master Port (PMP) and 2 MB Flash storing GUI assets, fonts, and bitmaps. Its 200 MHz core with FPU renders anti-aliased fonts, alpha-blended menus, and real-time gauge animations without external graphics controllers. The -40C to +125C automotive grade ensures reliable operation behind the dashboard, and the 144-TQFP exposes the PMP, USB, and CANless GPIOs needed for touchscreen + audio + diagnostics. Designers pair it with a small TFT-LCD and cap-touch controller for instrument cluster or HVAC control displays.
Recomendado
Motor Control (BLDC/PMSM FOC)
The PIC32MZ2048EFG144-E/PH executes Field-Oriented Control (FOC) loops for BLDC and PMSM motors with deterministic latency: the hardware FPU delivers single-cycle single-precision math for Park/Clarke transforms, the four 64-bit DSP accumulators handle saturating math for current-loop PI controllers, and the 12-bit 18 MSPS ADC samples phase currents with sub-microsecond jitter. Its 2 MB Flash stores vector tables and observer code while 512 KB SRAM holds state-space matrices. Designers use this MCU for industrial servo drives, e-bike controllers, and small-EV traction inverters where the automotive temperature grade is required.
Recomendado
Connected Home / Building Automation Hub
The PIC32MZ2048EFG144-E/PH serves as the central controller for home/building automation hubs, running Zigbee/Wi-Fi/BLE gateways, MQTT brokers, and rule engines concurrently. The 200 MHz core and 512 KB SRAM hold multiple TCP/UDP sockets plus TLS sessions, while 2 MB Flash accommodates a small RTOS plus firmware upgrade images. The HS USB 2.0 Host supports external radio dongles, and the Ethernet MAC provides the wired uplink to the home router. Compared to ESP32-based hubs, the PIC32MZ offers far more deterministic performance and automotive-grade temperature tolerance for outdoor equipment rooms.
Recomendado
High-Performance Medical Instrumentation
The PIC32MZ2048EFG144-E/PH powers portable medical instruments such as glucose meters, pulse oximeters, and ECG front ends where deterministic floating-point math, low power, and reliable storage are critical. Its FPU processes DSP filters and FFTs in real time, the 12-bit 18 MSPS ADC captures analog biosignals, and 2 MB Flash stores firmware with regulatory audit trails. The -40C to +125C temperature grade supports operation in ambulances and outdoor field clinics, while the integrated HS USB enables fast charging dock data transfer.
Recomendado
Industrial Ethernet Edge Controller
The PIC32MZ2048EFG144-E/PH acts as an Ethernet/IP, PROFINET, or EtherCAT slave edge controller in factory automation, running industrial protocol stacks on its 200 MHz core while the integrated 10/100 Ethernet MAC provides the network connection. The 2 MB Flash stores firmware, device descriptors, and CIP/PROFINET object dictionaries, while 512 KB SRAM handles process data buffers. Its automotive-grade temperature rating covers cabinet and shop-floor thermal stress. Designers integrate this MCU into remote I/O blocks, motor starters, and sensor aggregators needing determinism plus rich wired connectivity.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MZ2048EFG144-E/PH — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MZ2048EFM144-E/PH | PIC32MZ2048EFH144-E/PH | PIC32MZ2048EFK144-E/PH | PIC32MZ2048ECM144-I/PH | PIC32MZ1024EFG144-E/PH | PIC32MZ0512EFG144-E/PH |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-TQFP (16x16 mm) | 144-TQFP (16x16 mm) - same | 144-TQFP (16x16 mm) - same | 144-TQFP (16x16 mm) - same | 144-TQFP (16x16 mm) - same | 144-TQFP (16x16 mm) - same | 144-TQFP (16x16 mm) - same |
| Flash Memory | 2 MB | 2 MB - same | 2 MB - same | 2 MB - same | 2 MB - same | 1 MB (-50%) | 512 KB (-75%) |
| SRAM | 512 KB | 512 KB - same | 512 KB - same | 512 KB - same | 512 KB - same | 256 KB (-50%) | 128 KB (-75%) |
| Core Speed | 200 MHz | 200 MHz - same | 200 MHz - same | 200 MHz - same | 200 MHz - same | 200 MHz - same | 200 MHz - same |
| HS USB 2.0 | Yes | Yes - same | Yes - same | Yes - same | No - EC variant lacks HS USB | Yes - same | Yes - same |
| Ethernet MAC | 10/100 Mbps | 10/100 Mbps - same | 10/100 Mbps - same | 10/100 Mbps - same | No - EC variant lacks Ethernet | 10/100 Mbps - same | 10/100 Mbps - same |
| CAN 2.0B | No (EFG variant) | No (EFM variant) | Yes (EFH variant adds CAN) | Yes (EFK variant adds CAN) | No | No | No |
| Crypto Engine | No | Yes (EFM adds crypto) | Yes (EFH adds crypto) | No (EFK has CAN, no crypto) | No | No | No |
| Operating Temperature | -40C to +125C (E grade) | -40C to +125C - same | -40C to +125C - same | -40C to +125C - same | -40C to +85C (I grade) | -40C to +125C - same | -40C to +125C - same |
Principais diferenciais
- Highest Flash + SRAM density in PIC32MZ EF 144-TQFP family (vs PIC32MZ1024EFG144-E/PH)
- Available in automotive -40C to +125C temperature grade (vs PIC32MZ2048ECM144-I/PH)
- Includes HS USB 2.0 and Ethernet integrated (vs PIC32MZ2048ECM144-I/PH)
- Dual-panel Live-Update Flash enables fail-safe firmware upgrade (vs PIC32MX795F512L)
Notas de projeto
Decouple every VDD/VBAT/AVDD pin with a 100nF ceramic capacitor placed within 5 mm of the pin, plus a bulk 4.7uF-10uF tantalum or ceramic capacitor near the MCU's main VDD cluster. Per Microchip's PIC32MZ EF Hardware Design Checklist, AVDD should additionally have a ferrite bead or 10-ohm resistor isolation from VDD if analog noise is a concern. The USB VBUS pin must have a 10k pull-down if unused, and the VBAT pin (RTC backup) needs its own 3V battery or supercap rail. Estimated total decoupling budget for 144-TQFP: ~30 capacitors.
The PIC32MZ2048EFG144-E/PH at 200 MHz with all peripherals active can dissipate 1.0-1.5W. The 144-TQFP package has a theta_JA around 38 C/W on a 4-layer JEDEC test board, yielding ~50-60C junction temperature rise above ambient at full load. Estimated: at 85C ambient, Tj reaches ~135-145C - near the +125C automotive rating. For continuous full-CPU workloads in hot environments, add thermal vias under the exposed die pad (if available on the PH variant) or reduce CPU utilization. Derate peripheral clock speeds when system temperature exceeds 100C.
Route the USB D+/D- differential pair with 90-ohm differential impedance, matched length to within 150 mil, and a continuous ground reference plane beneath. Keep the 12 MHz primary crystal within 5 mm of OSC1/OSC2 with a guard trace tied to ground; long traces add parasitic capacitance and pull the oscillator off-frequency. The Ethernet MII/RMII traces to the external PHY should be length-matched within 50 mil and routed as 50-ohm single-ended impedances with ground stitching vias every 200 mil. The JTAG/TRCLK/PRD0-3 trace lines should not cross noisy power planes.
Do not assume the PIC32MZ EF shares pinout with the older PIC32MX series - it does not, despite both being 144-TQFP. The PIC32MZ EF uses different pin assignments for USB, Ethernet, and PMP. Do not enable the crypto engine on EFM/EFH variants without provisioning your firmware's key storage, or the device will fault on first access. Do not exceed 50 MHz on the 12-bit ADC or accuracy degrades beyond 10 ENOB - even though the spec sheet says 18 MSPS, that is sampling rate, not conversion throughput.
Place decoupling capacitors on the same layer as the MCU, directly between each VDD/VSS pair, with vias placed symmetrically to minimize loop inductance. Reserve a continuous ground pour under the entire IC with stitching vias every 200 mil around the periphery. Keep the analog ground (AVSS) and digital ground (VSS) planes separated and joined at a single point near the MCU to avoid ground loops that inject ADC noise. Reference Microchip application note AN1265 for PIC32MZ-specific PCB layout guidance.
Informações de conformidade
AEC-Q100 qualified via the E temperature grade (-40C to +125C) per Microchip product page. RoHS/REACH compliant per DigiKey listing. Halogen-free per Microchip PIC32MZ EF family datasheet DS60001320H.
