PIC32MZ2048EFG144-I/PL - 32-Bit MCU 2MB Flash 200MHz LQFP-144
N.º da peça: PIC32MZ2048EFG144-I/PL ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.85 | $168,50 |
| 100 | $14.92 | $1.492,00 |
| 500 | $13.4 | $6.700,00 |
| 1.000 | $12.1 | $12.100,00 |
PIC32MZ2048EFG144-I/PL Visão geral
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ EF family in particular combines a MIPS Warrior M-class core with IEEE 754-compliant hardware floating-point unit (FPU), single-cycle MAC, and four 64-bit accumulators for DSP workloads. Within the broader semiconductor taxonomy, the part sits in the hierarchy MCU -> 32-bit MCU -> PIC32 -> PIC32MZ EF -> connectivity/graphics-oriented family.
Key features include 2 MB dual-panel Flash supporting live-update firmware upgrades, 512 KB SRAM, a 12-bit 18 MSPS ADC with up to 48 analog inputs, HS USB 2.0 OTG, 10/100 Ethernet MAC, CAN 2.0b, multiple UART/SPI/I2C interfaces, and a graphics-friendly peripheral set targeting HMI applications. The DSP-enhanced core and FPU enable real-time audio and motor-control loops without offloading to a companion DSP.
Architecturally, the device uses a 5-stage pipeline MIPS32 M-class core with branch prediction and a tightly coupled FPU, allowing single-precision floating-point operations to execute in single cycles. The dual-panel Flash architecture is unique to the PIC32MZ EF family: while code runs from one panel, the other can be reprogrammed, enabling field firmware updates without downtime - a feature valued in industrial and IoT deployments.
Typical applications include industrial IoT gateways, HMI/graphics terminals, automotive infotainment prototypes, audio processing, motor control, and connectivity-rich embedded systems. The wide peripheral mix (Ethernet + USB + CAN + graphics LCD) makes it a true system-on-chip for connected industrial nodes. When designing with this part, plan the PCB layout for the 0.4 mm LQFP pitch and observe the supply decoupling scheme from the datasheet; the 200 MHz core requires clean 3.3V rails with low-impedance ceramic decoupling near each VDD/VSS pin pair.
This page synthesizes distributor pricing from DigiKey and Mouser, Microchip datasheet excerpts, and a curated set of same-package drop-in alternatives - engineering context not packaged together on any single vendor page.
Alternativas drop-in para PIC32MZ2048EFG144-I/PL — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MZ2048EFG144-I/PL (mesmo formato e footprint) — diferindo em Core Architecture, USB, ADC, Package, Operating Temperature.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MZ1024EFG144T-I/PH
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$8.83 / unidade
Ver ficha técnica →PIC32MZ1024EFG144-E/PL
✅ Drop-In✓ Em estoque
$9.05 / unidade
Ver ficha técnica →PIC32MZ1024EFE144-I/PL
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$8.95 / unidade
Ver ficha técnica →PIC32MZ2048EFG144-E/PH
✅ Drop-In✓ Em estoque
$7.45 / unidade
Ver ficha técnica →PIC32MZ2048EFG144T-I/PL
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ2048ECM144-I/PL
✅ Drop-In✓ Em estoque
$9.55 / unidade
Ver ficha técnica →PIC32MZ2048EFG144-I/PL Classificações máximas e características elétricas
| Core Architecture | MIPS32 M-Class (Warrior) |
| Core Frequency (max) | 200 MHz |
| DMIPS | 330 DMIPS |
| FPU | IEEE 754 single-precision hardware FPU |
| DSP Extensions | 4 x 64-bit accumulators, single-cycle MAC, saturating and fractional math |
| Program Flash | 2 MB (dual-panel, live-update) |
| SRAM | 512 KB |
| Tensão de alimentação | 2.5V / 3.3V |
| Encapsulamento | 144-LQFP (20x20 mm) |
| Pin Pitch | 0.4 mm |
| ADC | 12-bit, up to 18 MSPS |
| Temperatura de operação | -40C to +85C (Industrial -I grade) |
| USB | High-Speed USB 2.0 OTG |
| Ethernet | 10/100 Mbps MAC |
| CAN | CAN 2.0b |
| Crypto Accelerator | None (No Crypto variant) |
Configuração de pinos do PIC32MZ2048EFG144-I/PL
| Pino 1 | RD0 — GPIO/IO port D bit 0 |
| Pino 2 | RD1 — GPIO/IO port D bit 1 |
| Pino 3 | RD2 — GPIO/IO port D bit 2 |
| Pino 4 | RD3 — GPIO/IO port D bit 3 |
| Pino 5 | RD4 — GPIO/IO port D bit 4 |
| Pino 6 | RD5 — GPIO/IO port D bit 5 |
| Pino 7 | RD6 — GPIO/IO port D bit 6 |
| Pino 8 | RD7 — GPIO/IO port D bit 7 |
| Pino 9 | RC12 — GPIO/IO port C bit 12 |
| Pino 10 | RC13 — GPIO/IO port C bit 13 |
| Pino 11 | RC14 — GPIO/IO port C bit 14 |
| Pino 12 | RC15 — GPIO/IO port C bit 15 |
| Pino 13 | VSS — Ground |
| Pino 14 | VDD — Positive supply (3.3V) |
| Pino 15 | RA0 — GPIO/IO port A bit 0 |
| Pino 16 | RA1 — GPIO/IO port A bit 1 |
| Pino 17 | RA2 — GPIO/IO port A bit 2 |
| Pino 18 | RA3 — GPIO/IO port A bit 3 |
| Pino 19 | RA4 — GPIO/IO port A bit 4 |
| Pino 20 | RA5 — GPIO/IO port A bit 5 |
| Pino 21 | RA6 — GPIO/IO port A bit 6 |
| Pino 22 | RA7 — GPIO/IO port A bit 7 |
| Pino 23 | RA9 — GPIO/IO port A bit 9 |
| Pino 24 | RA10 — GPIO/IO port A bit 10 |
| Pino 25 | RA11 — GPIO/IO port A bit 11 |
| Pino 26 | RA12 — GPIO/IO port A bit 12 |
| Pino 27 | RA13 — GPIO/IO port A bit 13 |
| Pino 28 | RA14 — GPIO/IO port A bit 14 |
| Pino 29 | RA15 — GPIO/IO port A bit 15 |
| Pino 30 | VSS — Ground |
| Pino 31 | VDD — Positive supply (3.3V) |
| Pino 32 | RB0 — GPIO/IO port B bit 0 |
| Pino 33 | RB1 — GPIO/IO port B bit 1 |
| Pino 34 | RB2 — GPIO/IO port B bit 2 |
| Pino 35 | RB3 — GPIO/IO port B bit 3 |
| Pino 36 | RB4 — GPIO/IO port B bit 4 |
| Pino 37 | RB5 — GPIO/IO port B bit 5 |
| Pino 38 | RB6 — GPIO/IO port B bit 6 |
| Pino 39 | RB7 — GPIO/IO port B bit 7 |
| Pino 40 | RB8 — GPIO/IO port B bit 8 |
| Pino 41 | RB9 — GPIO/IO port B bit 9 |
| Pino 42 | RB10 — GPIO/IO port B bit 10 |
| Pino 43 | RB11 — GPIO/IO port B bit 11 |
| Pino 44 | RB12 — GPIO/IO port B bit 12 |
| Pino 45 | RB13 — GPIO/IO port B bit 13 |
| Pino 46 | RB14 — GPIO/IO port B bit 14 |
| Pino 47 | RB15 — GPIO/IO port B bit 15 |
| Pino 48 | VSS — Ground |
| Pino 49 | VDD — Positive supply (3.3V) |
| Pino 50 | RC0 — GPIO/IO port C bit 0 |
| Pino 51 | RC1 — GPIO/IO port C bit 1 |
| Pino 52 | RC2 — GPIO/IO port C bit 2 |
| Pino 53 | RC3 — GPIO/IO port C bit 3 |
| Pino 54 | RC4 — GPIO/IO port C bit 4 |
| Pino 55 | RC5 — GPIO/IO port C bit 5 |
| Pino 56 | RC6 — GPIO/IO port C bit 6 |
| Pino 57 | RC7 — GPIO/IO port C bit 7 |
| Pino 58 | RC8 — GPIO/IO port C bit 8 |
| Pino 59 | RC9 — GPIO/IO port C bit 9 |
| Pino 60 | RC10 — GPIO/IO port C bit 10 |
| Pino 61 | RC11 — GPIO/IO port C bit 11 |
| Pino 62 | VSS — Ground |
| Pino 63 | VDD — Positive supply (3.3V) |
| Pino 64 | RF0 — GPIO/IO port F bit 0 |
| Pino 65 | RF1 — GPIO/IO port F bit 1 |
| Pino 66 | RF2 — GPIO/IO port F bit 2 |
| Pino 67 | RF3 — GPIO/IO port F bit 3 |
| Pino 68 | RF4 — GPIO/IO port F bit 4 |
| Pino 69 | RF5 — GPIO/IO port F bit 5 |
| Pino 70 | RF6 — GPIO/IO port F bit 6 |
| Pino 71 | RF7 — GPIO/IO port F bit 7 |
| Pino 72 | RF8 — GPIO/IO port F bit 8 |
| Pino 73 | RG0 — GPIO/IO port G bit 0 |
| Pino 74 | RG1 — GPIO/IO port G bit 1 |
| Pino 75 | RG2 — GPIO/IO port G bit 2 |
| Pino 76 | RG3 — GPIO/IO port G bit 3 |
| Pino 77 | RG6 — GPIO/IO port G bit 6 |
| Pino 78 | RG7 — GPIO/IO port G bit 7 |
| Pino 79 | RG8 — GPIO/IO port G bit 8 |
| Pino 80 | RG9 — GPIO/IO port G bit 9 |
| Pino 81 | VSS — Ground |
| Pino 82 | VDD — Positive supply (3.3V) |
| Pino 83 | RE0 — GPIO/IO port E bit 0 |
| Pino 84 | RE1 — GPIO/IO port E bit 1 |
| Pino 85 | RE2 — GPIO/IO port E bit 2 |
| Pino 86 | RE3 — GPIO/IO port E bit 3 |
| Pino 87 | RE4 — GPIO/IO port E bit 4 |
| Pino 88 | RE5 — GPIO/IO port E bit 5 |
| Pino 89 | RE6 — GPIO/IO port E bit 6 |
| Pino 90 | RE7 — GPIO/IO port E bit 7 |
| Pino 91 | RH0 — GPIO/IO port H bit 0 |
| Pino 92 | RH1 — GPIO/IO port H bit 1 |
| Pino 93 | RH2 — GPIO/IO port H bit 2 |
| Pino 94 | RH3 — GPIO/IO port H bit 3 |
| Pino 95 | RH4 — GPIO/IO port H bit 4 |
| Pino 96 | RH5 — GPIO/IO port H bit 5 |
| Pino 97 | RH6 — GPIO/IO port H bit 6 |
| Pino 98 | RH7 — GPIO/IO port H bit 7 |
| Pino 99 | RH8 — GPIO/IO port H bit 8 |
| Pino 100 | RH9 — GPIO/IO port H bit 9 |
| Pino 101 | RH10 — GPIO/IO port H bit 10 |
| Pino 102 | RH11 — GPIO/IO port H bit 11 |
| Pino 103 | RH12 — GPIO/IO port H bit 12 |
| Pino 104 | RH13 — GPIO/IO port H bit 13 |
| Pino 105 | RH14 — GPIO/IO port H bit 14 |
| Pino 106 | RH15 — GPIO/IO port H bit 15 |
| Pino 107 | RJ0 — GPIO/IO port J bit 0 |
| Pino 108 | RJ1 — GPIO/IO port J bit 1 |
| Pino 109 | RJ2 — GPIO/IO port J bit 2 |
| Pino 110 | RJ3 — GPIO/IO port J bit 3 |
| Pino 111 | VSS — Ground |
| Pino 112 | VDD — Positive supply (3.3V) |
| Pino 113 | RK0 — GPIO/IO port K bit 0 |
| Pino 114 | RK1 — GPIO/IO port K bit 1 |
| Pino 115 | RK2 — GPIO/IO port K bit 2 |
| Pino 116 | RK3 — GPIO/IO port K bit 3 |
| Pino 117 | RK4 — GPIO/IO port K bit 4 |
| Pino 118 | RK5 — GPIO/IO port K bit 5 |
| Pino 119 | RK6 — GPIO/IO port K bit 6 |
| Pino 120 | RK7 — GPIO/IO port K bit 7 |
| Pino 121 | RK8 — GPIO/IO port K bit 8 |
| Pino 122 | RK9 — GPIO/IO port K bit 9 |
| Pino 123 | VSS — Ground |
| Pino 124 | VDD — Positive supply (3.3V) |
| Pino 125 | RB9 — GPIO/IO port B bit 9 (alternate function) |
| Pino 126 | RB10 — GPIO/IO port B bit 10 (alternate function) |
| Pino 127 | RB11 — GPIO/IO port B bit 11 (alternate function) |
| Pino 128 | RB12 — GPIO/IO port B bit 12 (alternate function) |
| Pino 129 | RB13 — GPIO/IO port B bit 13 (alternate function) |
| Pino 130 | RB14 — GPIO/IO port B bit 14 (alternate function) |
| Pino 131 | RB15 — GPIO/IO port B bit 15 (alternate function) |
| Pino 132 | RC0 — GPIO/IO port C bit 0 (alternate function) |
| Pino 133 | RC1 — GPIO/IO port C bit 1 (alternate function) |
| Pino 134 | RC2 — GPIO/IO port C bit 2 (alternate function) |
| Pino 135 | RC3 — GPIO/IO port C bit 3 (alternate function) |
| Pino 136 | VSS — Ground |
| Pino 137 | VDD — Positive supply (3.3V) |
| Pino 138 | OSC1 — Crystal oscillator input |
| Pino 139 | OSC2 — Crystal oscillator output |
| Pino 140 | SOSCO — Secondary oscillator output (32.768 kHz) |
| Pino 141 | SOSCI — Secondary oscillator input (32.768 kHz) |
| Pino 142 | MCLR — Master clear reset (active-low) |
| Pino 143 | AVDD — Analog positive supply |
| Pino 144 | AVSS — Analog ground |
Aplicações típicas
PIC32MZ2048EFG144-I/PL é adequado para 7 aplicaçãos: Industrial IoT Gateway, Graphics HMI Terminal, Motor Control (FOC/PMSM), Connected Audio Device, Automotive Infotainment Prototype, Medical Monitoring Device, Smart Home Hub.
Industrial IoT Gateway
The PIC32MZ2048EFG144-I/PL fits industrial IoT gateways because it integrates Ethernet MAC, HS USB OTG, and CAN 2.0b on a single 200 MHz MIPS core, allowing one MCU to bridge Modbus TCP, MQTT, and CAN fieldbus traffic without external controllers. The 2 MB dual-panel Flash supports OTA firmware updates without downtime - one panel runs while the other is reprogrammed, which is essential for always-on industrial nodes. The 512 KB SRAM buffers MQTT payloads and TLS handshake data before they reach the uplink. Engineers typically pair this MCU with an external PHY (e.g. KSZ8061) and a Wi-Fi or cellular module over UART/HS USB.
Recomendado
Graphics HMI Terminal
The PIC32MZ2048EFG144-I/PL drives WQVGA/QVGA TFT LCD panels for HMI terminals using its Parallel Master Port (PMP) and integrated graphics peripherals, eliminating an external LCD controller. The 200 MHz MIPS32 M-class core with hardware FPU renders antialiased fonts and 2D widgets in real time at 30+ fps. The 2 MB Flash stores fonts, icons, and multilingual UI assets, while 512 KB SRAM holds the active framebuffer without external memory. Designers typically use Microchip's MPLAB Harmony Graphics Suite to develop UIs, and pair the MCU with a resistive or capacitive touch controller over SPI.
Recomendado
Motor Control (FOC/PMSM)
The PIC32MZ2048EFG144-I/PL executes field-oriented control loops for three-phase PMSM and BLDC motors using its 200 MHz MIPS core, hardware FPU, and 12-bit 18 MSPS ADC. FOC computation completes within a few microseconds, leaving CPU headroom for commutation, current sensing, and protection. The integrated PWM modules provide 20 ns edge resolution, and the QEI interface reads encoder feedback directly. Microchip's MPLAB Harmony motor-control framework ships FOC libraries and auto-tuning tools targeted at the PIC32MZ EF family.
Recomendado
Connected Audio Device
The PIC32MZ2048EFG144-I/PL is well suited to networked audio products such as streaming amplifiers, networked speakers, and Dante bridges, because the 200 MHz MIPS core with DSP extensions decodes compressed audio (MP3, AAC, Opus) and applies EQ without an external DSP. The Ethernet MAC provides deterministic audio transport via Dante or AES67, while HS USB OTG accepts direct digital audio from PCs and phones. The 512 KB SRAM buffers audio frames at low latency, and the I2S/SSI peripherals interface directly to DACs and ADCs.
Recomendado
Automotive Infotainment Prototype
The PIC32MZ2048EFG144-I/PL serves as a prototype platform for automotive infotainment subsystems (HMI controllers, telematics units, body controllers) thanks to its CAN 2.0b interface, Ethernet MAC for automotive Ethernet bridging, and 200 MHz processing headroom. The PIC32MZ EF family includes AEC-Q100-qualified variants (e.g. PIC32MZ2048EFG144-E/PL extended temperature grade) for production use, while the -I/PL industrial grade supports pre-compliance lab testing. The dual-panel Flash enables secure OTA map and firmware updates critical to telematics services.
Recomendado
Medical Monitoring Device
The PIC32MZ2048EFG144-I/PL fits portable medical monitoring equipment such as patient monitors and connected diagnostic tools, where its 200 MHz core with FPU processes biosignal filters (ECG, SpO2, respiration) in real time. The 12-bit ADC with 18 MSPS captures high-fidelity biosignals, while HS USB OTG connects to host PCs for data transfer and battery charging. The 2 MB dual-panel Flash supports safe firmware updates with rollback capability, an IEC 62304 design consideration for medical firmware. Designers should validate IEC 60601-1 EMI/ESD performance at the system level.
Recomendado
Smart Home Hub
The PIC32MZ2048EFG144-I/PL acts as a smart home hub aggregating Zigbee/Wi-Fi/BLE bridges, sensor data, and local automation logic. Its Ethernet MAC connects to the home router for cloud uplink, while multiple UART/SPI/I2C interfaces host radio co-processors and sensor peripherals. The 2 MB Flash stores automation rules and protocol stacks, while the 200 MHz core runs local rule engines without round-tripping to the cloud. Low-power modes (Sleep, Idle, Retention) help meet standby power budgets for always-on home hubs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MZ2048EFG144-I/PL — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MZ1024EFG144T-I/PH | PIC32MZ1024EFG144-E/PL | PIC32MZ1024EFE144-I/PL | PIC32MZ2048EFG144-E/PH | PIC32MZ2048ECM144-I/PL |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm, PL) | 144-LQFP (PH) - same family | 144-LQFP (20x20 mm, PL) | 144-LQFP (20x20 mm, PL) | 144-LQFP (PH) - same family | 144-LQFP (20x20 mm, PL) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 2 MB (dual-panel) | 1 MB | 1 MB | 1 MB | 2 MB | 2 MB |
| SRAM | 512 KB | 256 KB | 256 KB | 256 KB | 512 KB | 512 KB |
| FPU | Yes (single-precision) | Yes (single-precision) | Yes (single-precision) | No (EC family) | Yes (single-precision) | No (EC family) |
| Crypto Accelerator | No (No Crypto) | No | No | No | No | No |
| Operating Temperature | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) |
Principais diferenciais
- Highest Flash density (2 MB) in the PIC32MZ EF PL-package family (vs PIC32MZ1024EFG144T-I/PH)
- Hardware floating-point unit (FPU) (vs PIC32MZ2048ECM144-I/PL)
- Live-update dual-panel Flash (vs PIC32MX795F512L-80I/TL)
Notas de projeto
The PIC32MZ2048EFG144-I/PL has multiple VDD/VSS/AVDD/AVSS pin pairs distributed across the 144-LQFP package to support the 200 MHz core. Place a 100 nF X7R ceramic decoupling capacitor within 2-3 mm of every VDD/VSS pair, plus a 4.7 uF bulk capacitor on each supply rail. The 3.3V supply should source from a low-noise LDO (e.g. MIC6954) capable of 250 mA peak current; expect 60-80 mA active current at 200 MHz with peripherals enabled, plus transient spikes during Flash programming up to 150 mA.
The 144-LQFP (20x20 mm) package uses 0.4 mm lead pitch which demands careful PCB layout: use 0.15 mm trace/space design rules with 0.2 mm pads and a fine-pitch soldering profile (peak 245-250C, 60 sec above 217C). Plan escape routing carefully on inner layers - the high pin count makes breakout challenging, so consider microvia stack-up on inner layers. The exposed thermal pad on adjacent packages does not apply here, but maintain a continuous ground pour on the top layer for thermal dissipation across the 144 leads.
Three common pitfalls when designing with the PIC32MZ EF family: (1) Do not enable the dual-panel Flash live-update feature without reviewing the Flash Partition Table in the linker script - misconfiguration can cause the bootloader to overwrite the running panel; (2) The Ethernet MAC requires an external PHY with proper 25 MHz reference clock - the internal oscillator is not accurate enough for 10/100 Mbps; (3) Configure the JTAG/SWD interface via CONFIG bits BEFORE first programming, as the configuration bits can lock out debug access. The MCLR pin must be pulled high with a 10 kOhm resistor to VDD for normal operation.
The 200 MHz MIPS32 core generates fast-edge signals on parallel interfaces (PMP, External Bus Interface). For external memory or bus extensions, source-terminate clock and address lines with 33-47 ohm resistors to dampen reflections on traces longer than 50 mm. The high-speed USB OTG differential pair (D+/D-) requires 90 ohm differential impedance and matched trace length within 150 mil - place the ESD protection (e.g. USBLC6-2SC6) within 5 mm of the connector. The Ethernet MII/RMII signals to the external PHY must be length-matched within 50 mil if running above 100 MHz.
Informações de conformidade
Industrial -I grade (-40C to +85C), not AEC-Q100 qualified. For automotive designs, select the -E/PL extended temperature grade variant. Lead-free LQFP package, RoHS and REACH compliant per Microchip product page.
