SCS8AC60EACFUE 8-Bit HC08/S08 Microcontroller | NXP
N.º da peça: SCS8AC60EACFUE ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
SCS8AC60EACFUE Visão geral
A microcontroller is an embedded semiconductor that combines a processor core, memory, and peripheral interfaces into one device. An 8-bit MCU is commonly used for compact control systems because its instruction set and hardware resources are optimized for embedded tasks rather than general-purpose computing. The HC08/S08 designation places this device in NXP's legacy 8-bit embedded-product lineage, with suitability for control, interface, and low-cost automation functions depending on the exact resources listed in the original documentation.
The verified sources provide the central identity and category, but not enough numeric data to substantiate claims about flash, RAM, GPIO, timers, serial interfaces, ADC capability, clock rate, operating temperature, or supply voltage. Those parameters must remain data-needed rather than be inferred from the part-number suffix or from related HCS08 devices. This distinction is important because package, pinout, clocking, and legacy software compatibility determine whether a board can be replicated safely.
Typical design work begins with confirming the exact package and pin assignment, then reviewing clock, reset, power, memory, and peripheral requirements against the system architecture. Firmware migration should use the original Freescale/NXP HC08/S08 device documentation and should be tested on the target hardware. Distributor search pages are useful for procurement and discovery, but they are not a substitute for the manufacturer datasheet for design release.
The main sourcing consideration is availability and lifecycle risk. Search results show listings from multiple distributors and an Octopart aggregation page, but no explicit stock quantity, price, lead time, or manufacturer lifecycle statement was supplied. Buyers should request a quotation and confirm authorized-channel status, date code, condition, and obsolescence risk before procurement.
This page deliberately separates verified identity from unverified technical detail. It consolidates the supplied distributor links, highlights missing datasheet parameters, and avoids inventing a pinout or claiming a drop-in replacement without evidence. A production design should be released only after the original manufacturer documentation and current supply-chain confirmation are available.
Alternativas drop-in para SCS8AC60EACFUE — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com SCS8AC60EACFUE (mesmo formato e footprint) — diferindo em ADC, Package, Mounting Type, RAM, Core.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MC9S08AC8MFGE
✅ Drop-In✓ Em estoque
$4.95 / unidade
Ver ficha técnica →MC9S08DZ60ACLF
✅ Drop-In✓ Em estoque
$6.85 / unidade
Ver ficha técnica →S9S08AW60E5MFGE
✅ Drop-In✓ Em estoque
$6.05 / unidade
Ver ficha técnica →MC9S08AW32MFGE
✅ Drop-In✓ Em estoque
$3.15 / unidade
Ver ficha técnica →MC9S08DN32AMLC
✅ Drop-In✓ Em estoque
$3.98 / unidade
Ver ficha técnica →SCS8AC60EACFUE Classificações máximas e características elétricas
| Product Type | 8-bit embedded microcontroller |
| Processor Family | HC08/S08 |
| Manufacturer | NXP Semiconductors |
| Architecture | 8-bit |
| Tipo de montagem | Surface-mount status not confirmed |
Guia de Configuração de Pinos do SCS8AC60EACFUE standard
Configuração de pinos para SCS8AC60EACFUE (pacote standard). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para SCS8AC60EACFUE.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
SCS8AC60EACFUE é adequado para 6 aplicaçãos: Legacy 8-bit Embedded Control, Appliance and Instrumentation Control, Motor and Relay Sequencing, Human-Interface and Keypad Systems, Sensor and Simple Data Acquisition, Legacy Product Maintenance.
Legacy 8-bit Embedded Control
SCS8AC60EACFUE is positioned as an 8-bit HC08/S08 microcontroller, making it relevant to compact embedded-control systems where an established HC08/S08 software and hardware ecosystem may already exist. The verified data confirms only the processor class and family, so exact control-loop performance, timer resolution, I/O count, and response time cannot be stated. A design team should use the target device's original datasheet to confirm available timers, interrupt sources, memory, and I/O before selecting it for motor sequencing, button logic, or system supervision.
Recomendado
Appliance and Instrumentation Control
The HC08/S08 family identification makes SCS8AC60EACFUE a candidate for appliance panels, small instruments, and auxiliary controllers, provided its verified resources meet the design. Such products often depend on reliable reset behavior, serial communication, keypad or display interfaces, and low-power operation, but none of those parameters is provided in the verified excerpts. Engineers should compare the missing specifications with the appliance requirement and preserve a migration path to a documented alternative before committing to a new platform.
Recomendado
Motor and Relay Sequencing
An 8-bit embedded MCU can be used for deterministic relay sequencing, stepper-command generation, and actuator supervision when its timers, I/O, and communication interfaces are adequate. The verified SCS8AC60EACFUE data does not specify those resources, so this application cannot be approved from the supplied information alone. Validate output drive limits, isolation requirements, watchdog behavior, timing margins, and protection circuitry in the complete system schematic rather than assuming that an 8-bit label guarantees deterministic control performance.
Recomendado
Human-Interface and Keypad Systems
SCS8AC60EACFUE may suit a compact keypad, status display, or menu controller if the actual HC08/S08 device provides the required digital I/O, serial interface, memory, and timing. The supplied search results do not identify these resources, so a footprint-only or family-only decision is unsafe. Confirm the exact package and pinout, debounce strategy, display or peripheral driver voltage, and firmware memory requirements before laying out the board.
Recomendado
Sensor and Simple Data Acquisition
A small 8-bit MCU can supervise sensors, digitize simple analog conditions, or manage low-bandwidth measurement systems when the required ADC, timers, communications, and environmental limits are verified. None of the target's converter, communication, or timing specifications appears in the verified data, so SCS8AC60EACFUE should be treated as an uncharacterized candidate for this use. Require a complete datasheet, calibration strategy, noise review, and sensor-interface design check before deployment.
Recomendado
Legacy Product Maintenance
The strongest potential use for SCS8AC60EACFUE is maintenance of an existing HC08/S08-based product where changing the controller could disrupt proven firmware, tooling, or certification work. Because the verified data does not include memory maps, interrupt vectors, timing, pinout, or package information, engineers should first recover the original controlled datasheet and compare it with the installed device. This approach reduces redesign risk, but it does not guarantee long-term supply availability or eliminate the need for an obsolescence plan.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para SCS8AC60EACFUE — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC9S08AC8MFGE | MC9S08DZ60ACLF | S9S08AW60E5MFGE | MC9S08AW32MFGE | MC9S08DN32AMLC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor |
| Processor Class | 8-bit | 8-bit MC9S08 family lead | 8-bit MC9S08 family lead | 8-bit S9S08 family lead | 8-bit MC9S08 family lead | 8-bit MC9S08 family lead |
| Family | HC08/S08 | MC9S08 family lead | MC9S08 family lead | S9S08 family lead | MC9S08 family lead | MC9S08 family lead |
Principais diferenciais
- Exact MPN identity is available for procurement search (vs Generic HC08/S08 family candidates)
- Legacy-family maintenance context (vs Newer MCU platforms)
- No unsupported replacement claim (vs Unverified same-brand MPN leads)
Notas de projeto
Do not substitute a family member based on the shared 8-bit or HC08/S08 label. First recover the original device datasheet, package drawing, memory map, pinout, clock requirements, and peripheral assignments. Then compare those facts with the proposed replacement and test programming, reset, interrupts, timing, and peripheral behavior on hardware. The supplied cross-reference results do not establish a verified drop-in replacement.
Keep the MCU footprint and programming-test pads compatible with the original board until the exact package is confirmed. Preserve power, ground, reset, clock, and debug or programming access points from the proven design. Because the supplied data does not identify the package or pinout, do not release a new layout from the MPN alone; verify every physical and electrical connection against the manufacturer drawing.
Validate the complete power tree before power-up because the SCS8AC60EACFUE supply-voltage limits, current consumption, and I/O levels are not supplied. Use the original schematic and datasheet to define decoupling, reset release, clock startup, brownout behavior, and unused-pin handling. Record actual rail tolerances and startup sequencing in the hardware requirements rather than relying on generic HC08/S08 assumptions.
Informações de conformidade
No compliance declarations were supplied in the verified web data. Obtain current manufacturer or authorized-distributor documentation for the exact MPN and package.