SPC5603PEF1MLL4R - 32-bit 40MHz 384KB Flash MCU | NXP
N.º da peça: SPC5603PEF1MLL4R ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $11.3 | $11,30 |
| 10 | $10.45 | $104,50 |
| 100 | $9.6 | $960,00 |
| 500 | $8.35 | $4.175,00 |
| 1.000 | $6.66 | $6.660,00 |
SPC5603PEF1MLL4R Visão geral
A microcontroller (MCU) is a single-chip embedded processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces such as UART, SPI, CAN, and timers on one die. Within the power-management hierarchy of an automotive electronic control unit (ECU), the MCU sits at the center, reading sensors and driving actuators. The SPC5603P family belongs to NXP (formerly Freescale) Qorivva line, a lineage derived from the PowerPC-based MPC55xx controllers widely deployed in body, chassis, and powertrain electronics.
Key features of the SPC5603PEF1MLL4R include the 32-bit e200z0h core executing at up to 40 MHz, 384 KB (384K x 8) of Flash program memory, an operating temperature range of -40C to +125C that covers under-hood and harsh environments, and a 3.3V supply domain typical of automotive MCUs.
Technically, the e200z0h is a Book E Power Architecture core with a simple in-order pipeline, optimized for low-cost, deterministic control rather than floating-point throughput. The MPC56xx peripheral set focuses on communication (CAN/FlexCAN, LIN/SCI, SPI/DSPI), timers, and ADC channels, which is why the family dominates body-control modules, gateway nodes, and gate-driver supervision in electric powertrain systems.
Typical applications include automotive body control modules, electric power steering assist logic, EV motor-controller supervision and gate-driver communication, and industrial motor control where -40C to +125C operation is required.
When designing with this device, budget Flash carefully: 384 KB is sufficient for moderate CAN-gateway firmware, but upgrading within the same footprint to the 512 KB or larger pin-compatible siblings (SPC5604P/SPC5605P) avoids a PCB respin later.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para SPC5603PEF1MLL4R — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com SPC5603PEF1MLL4R (mesmo formato e footprint) — diferindo em Connectivity, Program Memory Size, Series, Supply Voltage.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
SPC5604PEF1MLL4R
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
SPC5605PEF1MLL4R
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
SPC5606PEF1MLL4R
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
SPC5602BF2MLL6
✅ Drop-In✓ Em estoque
$5.59 / unidade
Ver ficha técnica →SPC5603PEF1MLL4R Classificações máximas e características elétricas
| Core Processor | e200z0h (Power Architecture) |
| Core Size | 32-Bit |
| Frequência máxima de clock | 40 MHz |
| Program Memory Size | 384 KB (384K x 8) |
| Program Memory Type | FLASH |
| Tensão de alimentação | 3.3 V |
| Temperatura de operação | -40C to +125C |
| Series | MPC56xx Qorivva SPC5603P |
| Encapsulamento | 100-LQFP (14x14 mm) |
| Tipo de montagem | Surface Mount |
| Peripherals | DMA, POR, PWM, WDT |
| Connectivity | CAN, SCI, SPI |
| Application Domain | Automotive |
| Packaging | Tape & Reel (R suffix) |
| Status RoHS | Compliant |
| Data Converters | ADC |
Guia de Configuração de Pinos do SPC5603PEF1MLL4R 100-lqfp (14x14 mm)
Configuração de pinos para SPC5603PEF1MLL4R (pacote 100-lqfp (14x14 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para SPC5603PEF1MLL4R.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
SPC5603PEF1MLL4R é adequado para 6 aplicaçãos: Automotive Body Control Module (BCM), Electric Vehicle Motor Controller Supervision, CAN Gateway and Network Node, Industrial Motor Control, Chassis and Steering Assist Electronics, Sensor and Actuator Communication Nodes.
Automotive Body Control Module (BCM)
Body control modules centralize lighting, door, wiper, and seat actuation in a vehicle. The SPC5603PEF1MLL4R fits this role because its 40 MHz e200z0h core handles multiple LIN and CAN communication stacks concurrently, while its -40C to +125C rating survives cabin and engine-bay temperature extremes without derating. In a typical BCM, the MCU runs diagnostic monitors, drives high-side/low-side driver PWM channels via its on-chip timer peripherals, and services the CAN body bus with its FlexCAN controller. The 384 KB Flash accommodates the communication stack, diagnostics, and NVM parameter storage typical of a mid-range BCM, and the 100-LQFP package provides enough GPIO for switch matrix scanning. Designers should allocate Flash headroom, or choose the pin-compatible SPC5604PEF1MLL4R (512 KB), since BCM firmware grows with every vehicle variant.
Recomendado
Electric Vehicle Motor Controller Supervision
In EV traction and auxiliary motor inverters, a supervision MCU monitors the gate driver and safety state while a dedicated gate-driver IC handles power switching. The SPC5603PEF1MLL4R serves this supervision role: its SPI interface exchanges fault and status registers with gate drivers such as the NXP GD316x, its ADC inputs read DC-link and phase-current telemetry, and its CAN link reports to the vehicle control unit. The -40C to +125C operating range covers the battery-box and inverter ambient environment, and the deterministic e200z0h core supports watchdog-supervised safety routines. The 3.3V IO domain simplifies interfacing with 3.3V gate-driver logic. Designers must ensure the watchdog and fail-safe paths are independent of the main control loop to meet functional-safety monitoring requirements.
Recomendado
CAN Gateway and Network Node
A CAN gateway routes frames between multiple bus segments and translates protocols (CAN to LIN, CAN to SPI peripherals). The SPC5603PEF1MLL4R is well suited to low- and mid-density gateways: the 40 MHz e200z0h core with DMA can move CAN frames between controllers without CPU bottleneck at classic-CAN data rates, 384 KB Flash holds the routing tables and diagnostic stack, and the 100-LQFP package exposes multiple CAN/LIN channels plus GPIO for bus-transceiver enable lines. The 3.3V supply matches common transceiver families, and -40C to +125C operation covers under-hood gateway placement. For gateways requiring CAN-FD or heavier routing, step up within NXP's Qorivva portfolio, but for classic CAN segments this part provides deterministic latency at low cost.
Recomendado
Industrial Motor Control
Beyond automotive, the SPC5603PEF1MLL4R applies to industrial drives, pumps, and fans where a robust 32-bit controller with hardware PWM and ADC is required. The on-chip PWM timers generate complementary or independent drive signals for three-phase inverters, the ADC samples current and bus-voltage feedback, and SPI connects to isolated gate drivers or encoders. The 40 MHz e200z0h core executes field-oriented control outer loops or supervises a dedicated motor coprocessor, and the -40C to +125C range allows mounting in sealed drives without forced cooling near the controller. 384 KB Flash is ample for sensorless FOC firmware plus a Modbus/CAN communication stack. Engineers should verify ADC sample timing against the family reference manual to meet current-loop bandwidth targets.
Recomendado
Chassis and Steering Assist Electronics
Electric power steering (EPS) and chassis-control nodes demand deterministic response, automotive temperature rating, and reliable CAN communication. The SPC5603PEF1MLL4R addresses these needs: its 40 MHz core delivers predictable interrupt latency for torque-command loops, its PWM and ADC peripherals interface with motor drivers and torque sensors, and the -40C to +125C rating covers the steering-column thermal environment including sun-load soak conditions. The 384 KB Flash stores assist maps, diagnostics, and fault logging required by steering functional-safety processes. The 100-LQFP (14x14 mm) footprint fits compact ECU boards mounted on the column or rack. Teams migrating from older S12 chassis MCUs can reuse CAN tooling while gaining the 32-bit Power Architecture headroom.
Recomendado
Sensor and Actuator Communication Nodes
Distributed smart actuators and sensor nodes - pedal modules, HVAC dampers, valve controllers - need a small, automotive-qualified MCU that bridges local control and the CAN/LIN network. The SPC5603PEF1MLL4R fills this niche: its SCI port supports LIN 2.x slave/master protocols, its ADC reads position potentiometers and Hall sensors, its timers generate actuator PWM, and its 384 KB Flash runs the communication stack plus local diagnostics and NVM wear-leveling. The 3.3V single-supply domain reduces bill-of-material complexity, while -40C to +125C tolerance suits nodes under the hood or in the climate zone. The 100-pin LQFP even supports one board design serving multiple node variants, amortizing tooling across a platform family.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para SPC5603PEF1MLL4R — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | SPC5604PEF1MLL4R | SPC5605PEF1MLL4R | SPC5602BF2MLL6 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same |
| Core / Frequency | e200z0h, 40 MHz | e200z0h, 40 MHz | e200z0h, 40 MHz | e200z0h, 40 MHz |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Family | SPC5603P (MPC56xx Qorivva) | SPC5604P (same family) | SPC5605P (same family) | SPC5602B (adjacent family) |
| Typical Application | BCM, gateway, EV supervision | Same + larger firmware | Same + AUTOSAR/OTA | Cost-optimized body node |
Principais diferenciais
- Entry cost point of the SPC560xP family with identical footprint (vs SPC5604PEF1MLL4R)
- Pin-compatible Flash upgrade path without respin (vs SPC5605PEF1MLL4R)
- Automotive-grade temperature range vs industrial MCUs (vs SPC5602BF2MLL6)
Notas de projeto
Flash sizing is the most common regret on SPC5603P designs. At 384 KB, a bootloader plus AUTOSAR-style CAN stack plus diagnostics can consume 70-80% quickly. Because SPC5604P (512 KB) and SPC5605P (768 KB) share the same 100-LQFP footprint, design the PCB and power tree for the family rather than the specific memory tier, and validate firmware on the largest-memory variant during development so a later swap to SPC5604PEF1MLL4R is a BOM change, not a respin.
The SPC5603PEF1MLL4R runs from a 3.3V supply domain typical of Qorivva SPC560xP devices. Provide a clean 3.3V rail with local 100 nF decoupling on each VDD pin pair plus bulk capacitance near the regulator, and respect the power sequencing/reset requirements in the family reference manual. The -40C to +125C automotive rating means the regulator must also be automotive grade; verify total supply budget including CAN transceiver and gate-driver interface currents before finalizing the 3.3V regulator selection.
The 100-LQFP (14x14 mm) 0.5 mm-pitch footprint is standard for reflow assembly but demanding for hand rework. Place the crystal/resonator circuit close to the MCU clock pins with short ground returns, route CAN/SCI/SPI traces with a solid reference plane, and keep ADC sense routing away from CAN transceiver switching edges. Follow NXP SPC560xP hardware design guidance for the exposed power/GND pin grouping; assign the watchdog reset line to a test point for field diagnostics.
Informações de conformidade
RoHS compliant per distributor listings; NXP SPC5603PEF1MLL4R material declaration PDF available at nxp.com/mcds. Automotive temperature grade (-40C to +125C) per manufacturer data. AEC-Q100 qualification statement not present in provided data.