STMicroelectronics

STM32F205ZFT6 - 120MHz Cortex-M3 MCU | STMicroelectronics

N.º da peça: STM32F205ZFT6 ✓ Ativo
2.5 V and 3.3 V Vdss 144-lead LQFP, 20 mm x 20 mm Package 120 MHz Speed 768 KB Flash Memory
MOQ: 1 |

STM32F205ZFT6 Visão geral

The STMicroelectronics STM32F205ZFT6 is a 32-bit Arm Cortex-M3 microcontroller operating up to 120 MHz, with 768 KB of Flash memory, 132 KB of SRAM, and 114 I/O pins in a 144-lead LQFP package. It combines 150 DMIPS processing performance with extensive connectivity and peripheral support for demanding embedded-control designs.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, input/output ports, and peripherals on one device. The STM32F205 belongs to the STM32F2 family of 32-bit embedded MCUs, which sit within the broader hierarchy of Arm Cortex-M3 MCU, embedded processor, microcontroller, and semiconductor. This integration reduces component count and simplifies control of industrial, communications, consumer, and instrumentation equipment.

Core features include an Arm Cortex-M3 processor with an ART Accelerator for zero-wait-state Flash execution, a maximum operating frequency of 120 MHz, and an operating-performance rating of 150 DMIPS. The device provides 768 KB of program Flash, 132 KB of SRAM, and 114 general-purpose I/O. Its 2.5 V and 3.3 V operating classes support embedded systems designed around common industrial and consumer logic levels.

The STM32F205 architecture combines a high-performance 32-bit core with extensive serial and parallel interfaces. Typical integration includes USART, SPI, I2C, USB, Ethernet MAC, CAN, timers, DMA controllers, ADCs, and GPIO resources, depending on the exact device configuration. The 144-LQFP package provides a large pin count for systems that need multiple buses, external memory interfaces, high-speed signals, and substantial digital I/O without using a complex ball-grid-array package.

Typical applications include industrial automation controllers, Ethernet-connected equipment, USB peripherals, CAN-based nodes, data acquisition units, building-control systems, and high-performance embedded gateways. The 114 available I/O pins are especially useful where several communications buses, status indicators, sensors, relays, and human-interface controls must share one controller. A single STM32F205ZFT6 can consolidate functions that might otherwise require several discrete controllers.

PCB implementation should account for the LQFP-144 footprint's 20 mm by 20 mm body, fine-pitch leads, numerous decoupling requirements, and multiple supply domains. Place bypass capacitors close to the appropriate power pins, keep high-speed and communication traces short, and follow the pin-description and recommended-layout guidance in the manufacturer datasheet. Verify every peripheral signal, alternate function, and package connection before releasing the PCB.

This page combines the key electrical characteristics, practical application guidance, package information, same-family drop-in alternatives, and design considerations needed to evaluate the STM32F205ZFT6 for a new embedded platform. It also highlights the memory and feature differences that must be reviewed before using another STM32F2 device as a second source.

Alternativas drop-in para STM32F205ZFT6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM32F205ZFT6 (mesmo formato e footprint) — diferindo em Package, SRAM, Flash Memory, Supply Voltage, Core.

STMicroelectronics
Package: 144-LQFP
SRAM: 128 Kbytes
Core: Arm 32-bit Cortex-M3
Comparar com STM32F205ZFT6 →
STMicroelectronics
Package: LQFP144 (20x20 mm)
SRAM: 128 KB
Flash Memory: 512 KB
Comparar com STM32F205ZFT6 →
STMicroelectronics
Package: LQFP144 (20x20 mm)
SRAM: 128 KB
Flash Memory: 1 MB
Comparar com STM32F205ZFT6 →
STMicroelectronics
Package: 144-LQFP (20 x 20 mm)
Flash Memory: 1 MB (1M x 8)
Supply Voltage: 2.5 V and 3.3 V
Comparar com STM32F205ZFT6 →

STM32F205ZGT6

✅ Drop-In
STMicroelectronics
📦 144-LQFP (20x20 mm)
Arm 32-bit Cortex-M3 · 120 MHz · 32-bit RISC · 150 DMIPS · 1.25 DMIPS/MHz · 1 MB Flash · 1 M x 8 bits · 128 Kbytes

Consulte o preço

Ver ficha técnica →

STM32F207ZGT6

✅ Drop-In
STMicroelectronics
📦 144-LQFP (20x20 mm)
ARM Cortex-M3 · 120 MHz · 1 MB · 128 KB · 1.8 V to 3.6 V · -40C to +85C · LQFP144 (20x20 mm) · 114

Consulte o preço

Ver ficha técnica →

STM32F207ZFT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 144-LQFP (20x20 mm)
Same 768 KB Flash and 120 MHz class; verify peripheral and firmware compatibility

📋 Alternativa de referência (fora do catálogo)

STM32F207ZET6

✅ Drop-In ⚠️ Especificações não verificadas
STMicroelectronics
📦 144-LQFP (20x20 mm)
ARM Cortex-M3 · 120 MHz · 512 KB · 128 KB · 1.8V to 3.6V · -40°C to +85°C · LQFP144 (20x20 mm) · 114

Consulte o preço

Ver ficha técnica →

STM32F215ZGT6

✅ Drop-In ⚠️ Especificações não verificadas
STMicroelectronics
📦 144-LQFP (20x20 mm)
32-bit ARM Cortex-M3 microcontroller · 120 MHz · ARM Cortex-M3 32-bit RISC · 1 MB (1M x 8) · Flash · 144-LQFP (20 x 20 mm) · Surface Mount · 2.5 V and 3.3 V

Consulte o preço

Ver ficha técnica →

STM32F205ZFT6 Classificações máximas e características elétricas

Product Type 32-bit Arm Cortex-M3 microcontroller
Maximum CPU Frequency 120 MHz
Core Arm Cortex-M3
Performance 150 DMIPS
Program Memory 768 KB Flash
Program Memory Organization 768K x 8 bits
SRAM 132K x 8 bits
Number of I/O Pins 114
Logic Voltage Classes 2.5 V and 3.3 V
Encapsulamento 144-lead LQFP, 20 mm x 20 mm
Tipo de montagem Surface mount
Flash Execution Zero-wait-state execution with ART Accelerator
Memory Protection Unit Present
Maximum I/O Count 114

Guia de Configuração de Pinos do STM32F205ZFT6 144-lead lqfp, 20 mm x 20 mm

Configuração de pinos para STM32F205ZFT6 (pacote 144-lead lqfp, 20 mm x 20 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 144-lead lqfp, 20 mm x 20 mm para STM32F205ZFT6

Nenhum dado detalhado de pinagem disponível para STM32F205ZFT6.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM32F205ZFT6 é adequado para 6 aplicaçãos: Industrial Automation Controller, Ethernet-Connected Equipment, USB Data Acquisition Unit, CAN-Based Networked Node, Building and Environmental Control, High-Performance Embedded Gateway.

🏭

Industrial Automation Controller

The STM32F205ZFT6 fits industrial automation controllers because its 120 MHz Cortex-M3 core provides 150-DMIPS performance while 114 I/O pins leave ample room for sensors, actuators, status indicators, and field-bus connections. Place the MCU between the power system and machine I/O, then use its timers and communication peripherals for deterministic control loops. The 768 KB Flash and 132 KB SRAM support protocol stacks and application logic. Industrial qualification still depends on the complete assembly, including isolation, surge protection, grounding, and environmental testing.

🌐

Ethernet-Connected Equipment

The STM32F205ZFT6 is suitable for Ethernet-connected equipment when its communication and real-time processing requirements exceed those of a small 8-bit or low-clock microcontroller. A 120 MHz Cortex-M3 core can support protocol processing and control tasks concurrently, while 114 I/O pins expose external memory and peripheral connections. The 768 KB Flash provides room for a network stack and application firmware, and 132 KB of SRAM accommodates working buffers. Validate PHY selection, clock timing, isolation, magnetics, and board-level EMC before deployment.

🖥️

USB Data Acquisition Unit

The STM32F205ZFT6 can serve as the control core of a USB data-acquisition unit because it combines a 120 MHz processor, ample SRAM, and a large pin budget with USB-capable STM32F2-class integration. Use the MCU to sample sensors, buffer data, perform signal conditioning in software, and send organized records to a host over USB. Its 768 KB Flash is practical for protocol and control code, while 114 I/O supports multiple converters, digital channels, and communication transceivers. Confirm USB electrical characteristics and transceiver implementation in the final design.

🔧

CAN-Based Networked Node

The STM32F205ZFT6 works well as the central controller in a CAN-based networked node because its 120 MHz Cortex-M3 performance can handle communication servicing alongside real-time application logic. The 114 available I/O pins provide ample connections for sensors, local outputs, status feedback, and other buses, while 768 KB of Flash accommodates protocol drivers and control software. A practical implementation should include a suitable CAN transceiver, termination strategy, protection devices, common-mode considerations, and firmware-based fault handling.

🧩

Building and Environmental Control

The STM32F205ZFT6 can coordinate building-control and environmental monitoring functions across lighting, HVAC, temperature, humidity, occupancy, and communications subsystems. Its 114 I/O pins reduce the need for external I/O expanders, and the 120 MHz core provides responsive scheduling for control loops and communications. The 768 KB Flash is useful for multiple protocol stacks and configuration data, while 132 KB of SRAM supports local buffering. Field deployment should add appropriate sensing isolation, surge protection, fail-safe behavior, and careful power partitioning.

📱

High-Performance Embedded Gateway

The STM32F205ZFT6 fits embedded gateways that must translate between local serial interfaces and a host processor or network. Its 120 MHz Arm Cortex-M3 core, 768 KB Flash, 132 KB SRAM, and 114 GPIO allow firmware to maintain multiple protocol contexts and perform buffering without an external bus interface. Use the MCU for framing, routing, diagnostics, and configuration while preserving deterministic timing for attached peripherals. Thermal, power, boot-security, and peripheral-sharing details require verification against the final system architecture.

What are the key specifications of STM32F205ZFT6 that engineers should know?
The STM32F205ZFT6 is a 32-bit Arm Cortex-M3 microcontroller rated up to 120 MHz, with 768 KB of Flash, 132 KB of SRAM, and 114 I/O pins in a 144-lead LQFP package. According to the STMicroelectronics STM32F205xx and STM32F207xx datasheet, the device delivers up to 150 DMIPS and uses the ART Accelerator for zero-wait-state execution from Flash. These characteristics position it as a high-pin-count embedded controller for communications, industrial automation, data acquisition, and USB or Ethernet-connected equipment.
Where can I download the STM32F205ZFT6 datasheet PDF?
The official STM32F205ZFT6 datasheet is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/CD00237391.pdf. It covers the STM32F205xx and STM32F207xx families and is the primary document for electrical characteristics, memory organization, peripheral behavior, package pin assignments, and recommended application circuitry. Engineers should use the STM32F205-specific tables and ordering-information section to confirm the exact device variant rather than relying on a third-party summary page.
What is the operating voltage of STM32F205ZFT6?
The STM32F205ZFT6 is associated with 2.5 V and 3.3 V operating classes. According to the STM32F205xx and STM32F207xx manufacturer datasheet, the exact minimum and maximum voltage limits, regulator configurations, and supply-domain requirements must be taken from the device electrical-characteristics tables. The 2.5 V and 3.3 V markings describe the logic classes used by this family and should not be interpreted as permission to apply 3.3 V directly to every supply or I/O pin without checking its individual limits.
How much Flash and SRAM does the STM32F205ZFT6 provide?
The STM32F205ZFT6 provides 768 KB of Flash memory organized as 768K x 8 bits and 132 KB of SRAM organized as 132K x 8 bits. The STMicroelectronics datasheet identifies the 768 KB device code and describes the associated memory map and bus organization. The 768 KB Flash capacity is sufficient for a substantial embedded application, while 132 KB of SRAM can support working buffers, protocol stacks, and real-time control tasks without external static RAM.
How many I/O pins and what package does STM32F205ZFT6 use?
The STM32F205ZFT6 provides 114 I/O pins in a 144-lead LQFP package measuring 20 mm by 20 mm. The manufacturer datasheet pinout and package drawing define the complete electrical assignment for all 144 leads, including power, ground, clock, reset, debug, and peripheral signals. The large pin count supports several communication buses and control functions on one device, while the LQFP package remains practical for inspection and leaded-board assembly.
Where can I find the STM32F205ZFT6 pinout?
The STM32F205ZFT6 pinout is found in the pin-description table and package drawing in the official STMicroelectronics STM32F205xx and STM32F207xx datasheet. Use that table to assign every LQFP-144 lead, including alternate functions and power connections. A generic package drawing is not sufficient because the same mechanical outline can be used by devices with different peripheral mixes. Verify the exact order code against the datasheet before routing signals or applying test-point assumptions.
What can replace STM32F205ZFT6?
STM32F205ZGT6 and STM32F207ZGT6 are the closest documented same-family alternatives for an STM32F205ZFT6 footprint review, while STM32F207ZFT6 and STM32F215ZGT6 require firmware and peripheral checks before substitution. The STM32F205ZGT6 and STM32F207ZGT6 use the same 144-lead LQFP format but provide 1 MB rather than 768 KB of Flash. A replacement should be validated for pin function, memory organization, clocks, peripherals, firmware, and qualification rather than selected from package appearance alone.
Is STM32F205ZFT6 the same as STM32F207ZGT6?
No, the STM32F205ZFT6 and STM32F207ZGT6 are related STM32F2 devices but are not identical. Both use an Arm Cortex-M3 core, reach 120 MHz, and are available in a 144-lead LQFP package, but the STM32F207ZGT6 has 1 MB of Flash compared with 768 KB for the STM32F205ZFT6. Confirm the complete pin list, peripheral configuration, start-up sequence, and firmware compatibility before using the STM32F207ZGT6 as a drop-in replacement.
STM32F205ZFT6 vs STM32F205ZGT6 — which is better for a 144-LQFP design?
The STM32F205ZGT6 is preferable when a design needs more Flash than the STM32F205ZFT6 while retaining the 144-LQFP architecture. The STM32F205ZGT6 provides 1 MB of Flash, which is 256 KB or approximately 33% more than the 768 KB in the STM32F205ZFT6. Both are rated at 120 MHz, but the additional memory alone is not proof of complete drop-in equivalence; check the package pin table, supported peripherals, temperature grade, and firmware assumptions.
STM32F205ZFT6 vs STM32F207ZGT6 — can the STM32F207ZGT6 replace it?
The STM32F207ZGT6 can be considered for a same-package replacement review, but it is not automatically interchangeable. It retains a 120 MHz Arm Cortex-M3 architecture and 144-lead LQFP format while increasing Flash from 768 KB to 1 MB. The key risk is that family-specific peripheral availability, pin multiplexing, startup behavior, and board-support-package assumptions may differ. Confirm every assigned pin and peripheral in the manufacturer documentation, then validate the existing firmware and board-level interfaces.
When should I choose STM32F205ZFT6 over a same-package alternative?
Choose the STM32F205ZFT6 when its 768 KB Flash, 132 KB SRAM, 114 I/O pins, and established STM32F2 peripheral set align with the design without requiring the larger memory density of a 1 MB variant. It is attractive when the board already has validated STM32F205 firmware, pin assignments, and toolchain support. Move to a higher-memory part only when code size or data-storage requirements justify the additional review of startup code, linker configuration, peripherals, and qualification.
Is STM32F205ZFT6 suitable for industrial automation and communications equipment?
The STM32F205ZFT6 is suitable for industrial automation and communications equipment when the selected board operates within its specified electrical and temperature limits. Its 120 MHz Cortex-M3 core, 150-DMIPS performance class, 768 KB Flash, 132 KB SRAM, and 114 I/O pins support real-time control, multiple serial interfaces, data acquisition, and protocol handling. Industrial use also requires appropriate isolation, surge protection, EMC design, and environmental qualification beyond the MCU itself.
What is the lead time for STM32F205ZFT6?
The current production lead time for the STM32F205ZFT6 should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, package configuration, regional inventory, and manufacturing conditions, so a generic delivery estimate is not appropriate. Provide the complete order code, required quantity, target date, and shipment destination with the inquiry to obtain a current scheduling response.
Is STM32F205ZFT6 in stock?
Current stock status for the STM32F205ZFT6 should be confirmed through the Request a Quote form on this page. Because availability can change with production schedules and order volume, use the form to request the exact part number and quantity rather than relying on a historical inventory indication. Include the required delivery date and destination so the response can reflect the intended supply commitment.
What is the price of STM32F205ZFT6?
Use the Request a Quote form on this page for a current STM32F205ZFT6 price and quantity schedule. Pricing depends on order volume, package presentation, sourcing availability, and current market conditions. The requested quotation should identify the exact MPN, ordered quantity, and required delivery terms. Do not substitute a price from a different STM32F205 variant because Flash density, temperature grade, and order-code suffixes can create materially different commercial conditions.
What is the best drop-in replacement for STM32F205ZFT6?
No alternative can be identified as an unconditional drop-in replacement without completing a device-specific pin and firmware review. STM32F205ZGT6 and STM32F207ZGT6 are the strongest same-package candidates because both use 144-lead LQFP packaging and the same 120 MHz Cortex-M3 family, but each provides 1 MB of Flash rather than 768 KB. STM32F207ZFT6 and STM32F215ZGT6 are additional same-family review candidates. Validate pin multiplexing, memory map, peripheral set, clocks, tools, and qualification before substitution.

Dados de referência de engenharia para STM32F205ZFT6 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the STM32F205ZFT6 when the design needs a 120 MHz Arm Cortex-M3 controller, 768 KB of Flash, 132 KB of SRAM, and 114 I/O pins in a 144-lead LQFP package. It is a strong fit for industrial control, data acquisition, USB equipment, CAN nodes, and embedded gateways that use the established STM32F2 platform. Select STM32F205ZGT6 or STM32F207ZGT6 when the extra 256 KB of Flash simplifies code growth, and consider STM32F207ZFT6 for a closer memory-density comparison. STM32F207ZET6 provides 256 KB less Flash and should be selected only when its smaller memory map is sufficient. STM32F215ZGT6 may suit designs requiring its family features. For every alternative, verify the complete 144-pin assignment, peripheral mix, clocks, memory map, firmware, tooling, and qualification; package compatibility alone does not guarantee drop-in operation.

Comparação com alternativas

Parâmetro Este produto STM32F205ZGT6 STM32F207ZGT6 STM32F207ZFT6 STM32F207ZET6 STM32F215ZGT6
Manufacturer STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 144-LQFP (20x20 mm) 144-LQFP (20x20 mm) 144-LQFP (20x20 mm) 144-LQFP (20x20 mm) 144-LQFP (20x20 mm) 144-LQFP (20x20 mm)
Processor Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Maximum Frequency 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 768 KB 1 MB 1 MB 768 KB 512 KB 1 MB

Principais diferenciais

  • Matches the common 768 KB Flash density more closely (vs STM32F207ZET6)
  • Uses the same 120 MHz Arm Cortex-M3 performance class (vs STM32F207ZGT6)
  • Targets the validated STM32F205 device identity (vs STM32F215ZGT6)
  • Combines high processing performance with a large pin count (vs STM32F207ZGT6)

Notas de projeto

Use the manufacturer pin table to identify every supply, ground, and analog-reference connection before assigning decoupling. Place the required bulk and high-frequency bypass capacitors at the associated pins with the shortest possible current loops. Separate noisy digital return paths from sensitive analog returns where the recommended layout permits it. Verify regulator headroom, startup current, and the voltage applied to each I/O domain against the exact electrical-characteristics tables.

The 144-lead LQFP package has 0.5 mm class lead spacing and requires careful land-pattern and solder-process control. Follow the official package drawing for pad dimensions rather than scaling a generic LQFP footprint. Keep high-speed communication routes short, provide continuous ground references, and maintain clearance around sensitive analog inputs. Account for board warpage, thermal expansion, and assembly accessibility across the 20 mm by 20 mm package.

Assign pins from the device's alternate-function matrix before schematic capture; unused pins and reserved connections must follow the manufacturer instructions. Verify boot, reset, clock, debug, and communication connections against the selected startup configuration. Firmware, bootloader behavior, and peripheral clock configuration should be reviewed whenever changing among STM32F205 and STM32F207 devices, even when the package and CPU frequency remain unchanged.

Estimated: at a 3.3 V core and 120 MHz, power depends on active peripherals, Flash activity, load, and ambient conditions, so no single operating current should be assumed. Validate worst-case activity with a representative firmware build and measure junction-temperature rise on the assembled PCB. Provide copper thermal spreading around the LQFP while maintaining the manufacturer-recommended copper geometry and keeping sensitive analog nodes away from hot return paths.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance status is not stated in the available manufacturer or distributor records. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using the exact STM32F205ZFT6 order code and current STMicroelectronics documentation.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

STM32F205ZFT6 datasheet STM32F205ZFT6 datasheet pdf STM32F205ZFT6 pinout STM32F205ZFT6 specifications STM32F205ZFT6 equivalent STM32F205ZFT6 replacement STM32F205ZFT6 cross reference STM32F205ZFT6 vs STM32F207ZGT6 STM32F205ZFT6 LQFP-144 footprint STM32F205ZFT6 price STM32F205ZFT6 stock STMicroelectronics STM32F205ZFT6

Componentes & termos relacionados

STMicroelectronics STM32F205ZFT6 STM32F205ZGT6 STM32F207ZGT6 STM32F207ZFT6 STM32F207ZET6 STM32F215ZGT6 STM32F2 Arm Cortex-M3 32-bit microcontroller embedded microcontroller semiconductor ART Accelerator Flash memory SRAM LQFP-144 surface mount 120 MHz 150 DMIPS 114 I/O pins industrial automation Ethernet USB CAN
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ