STM32F207ZET6 - 32-bit ARM Cortex-M3 MCU, 512KB Flash | STMicroelectronics
N.º da peça: STM32F207ZET6 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.8 | $980,00 |
| 500 | $8.9 | $4.450,00 |
| 1.000 | $8.1 | $8.100,00 |
STM32F207ZET6 Visão geral
What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brain of countless electronic products, from automotive engine control units to consumer appliances and IoT devices. The STM32F207ZET6 belongs to the STM32F2 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers, positioned between the mainstream F1 series and the high-performance F4/H7 series.
Key features of the STM32F207ZET6 include a 120 MHz ARM Cortex-M3 core with 1.25 DMIPS/MHz, 512 KB Flash, 128 KB SRAM, and a comprehensive set of peripherals: 3x 12-bit ADCs, 2x DACs, 4x USARTs, 2x UARTs, 3x SPI, 2x I2C, 2x CAN, 1x USB 2.0 OTG FS/HS, 1x Ethernet MAC, and a camera interface. It also includes a cryptographic/hash processor for AES, DES, and 3DES encryption, and a true random number generator (TRNG). The device operates from 1.8V to 3.6V supply and supports a temperature range of -40°C to +85°C (industrial grade).
The STM32F207ZET6 is built on ST's advanced 90nm process technology, providing a balance of performance and power efficiency. The ART Accelerator™ (Adaptive Real-Time memory accelerator) enables zero-wait-state execution from Flash, maximizing the effective throughput of the Cortex-M3 core. The device also features a flexible memory controller (FMC) supporting external memory interfaces, including SRAM, PSRAM, NOR, and NAND Flash.
Typical applications include industrial control systems, motor drives, PLCs, medical devices, point-of-sale terminals, networking equipment, and IoT gateways. The rich connectivity (Ethernet, USB, CAN) makes it ideal for applications requiring multiple communication interfaces. The cryptographic hardware accelerates secure communication protocols, enhancing data security in connected devices.
When designing with this MCU, pay attention to power supply decoupling: place 100nF capacitors close to each VDD pin and a 4.7uF bulk capacitor. The VDDA analog supply should be filtered with a ferrite bead and 1uF capacitor to reduce noise for ADC accuracy. Also, configure the boot pins correctly to select the desired boot source (Flash, SRAM, or system memory).
Alternativas drop-in para STM32F207ZET6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32F207ZET6 (mesmo formato e footprint) — diferindo em ADC, DMA, Core, Flash Memory, SRAM.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STM32F207ZGT6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$8.1 / unidade
Ver ficha técnica →STM32F407ZET6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$6.6023 / unidade
Ver ficha técnica →STM32F405ZET6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32F207ZET6 Classificações máximas e características elétricas
| Core | ARM Cortex-M3 |
| Max Clock Frequency | 120 MHz |
| Flash Memory | 512 KB |
| SRAM | 128 KB |
| Tensão de alimentação | 1.8V to 3.6V |
| Temperatura de operação | -40°C to +85°C |
| Encapsulamento | LQFP144 (20x20 mm) |
| Number of I/Os | 114 |
| ADC | 3x 12-bit, up to 24 channels |
| DAC | 2x 12-bit |
| USART/UART | 4x USART, 2x UART |
| SPI | 3x SPI |
| I2C | 2x I2C |
| CAN | 2x CAN 2.0B |
| USB | USB 2.0 OTG FS/HS |
| Ethernet | 10/100 MAC |
| Cryptographic Acceleration | AES, DES, 3DES, TRNG |
| DMA | 16-channel DMA |
| Timers | 12x 16-bit, 2x 32-bit |
| RoHS | Compliant |
Configuração de pinos do STM32F207ZET6
| Pino 1 | PE2 — GPIO / TRACECLK |
| Pino 2 | PE3 — GPIO / TRACED0 |
| Pino 3 | PE4 — GPIO / TRACED1 |
| Pino 4 | PE5 — GPIO / TRACED2 |
| Pino 5 | PE6 — GPIO / TRACED3 |
| Pino 6 | VBAT — Backup battery supply |
| Pino 7 | PC13 — GPIO / RTC / Tamper |
| Pino 8 | PC14 — GPIO / OSC32_IN |
| Pino 9 | PC15 — GPIO / OSC32_OUT |
| Pino 10 | PF0 — GPIO / OSC_IN |
| Pino 11 | PF1 — GPIO / OSC_OUT |
| Pino 12 | PF2 — GPIO |
| Pino 13 | PF3 — GPIO |
| Pino 14 | PF4 — GPIO |
| Pino 15 | PF5 — GPIO |
| Pino 16 | PF6 — GPIO |
| Pino 17 | PF7 — GPIO |
| Pino 18 | PF8 — GPIO |
| Pino 19 | PF9 — GPIO |
| Pino 20 | PF10 — GPIO |
| Pino 21 | VSS — Ground |
| Pino 22 | VDD — Power supply |
| Pino 23 | PF11 — GPIO |
| Pino 24 | PF12 — GPIO |
| Pino 25 | PF13 — GPIO |
| Pino 26 | PF14 — GPIO |
| Pino 27 | PF15 — GPIO |
| Pino 28 | PG0 — GPIO |
| Pino 29 | PG1 — GPIO |
| Pino 30 | PG2 — GPIO |
| Pino 31 | PG3 — GPIO |
| Pino 32 | PG4 — GPIO |
| Pino 33 | PG5 — GPIO |
| Pino 34 | PG6 — GPIO |
| Pino 35 | PG7 — GPIO |
| Pino 36 | PG8 — GPIO |
| Pino 37 | PG9 — GPIO |
| Pino 38 | PG10 — GPIO |
| Pino 39 | PG11 — GPIO |
| Pino 40 | PG12 — GPIO |
| Pino 41 | PG13 — GPIO |
| Pino 42 | PG14 — GPIO |
| Pino 43 | PG15 — GPIO |
| Pino 44 | VSS — Ground |
| Pino 45 | VDD — Power supply |
| Pino 46 | PD0 — GPIO / FSMC_D2 |
| Pino 47 | PD1 — GPIO / FSMC_D3 |
| Pino 48 | PD2 — GPIO / FSMC_D4 |
| Pino 49 | PD3 — GPIO / FSMC_D5 |
| Pino 50 | PD4 — GPIO / FSMC_D6 |
| Pino 51 | PD5 — GPIO / FSMC_D7 |
| Pino 52 | PD6 — GPIO / FSMC_D8 |
| Pino 53 | PD7 — GPIO / FSMC_D9 |
| Pino 54 | PD8 — GPIO / FSMC_D10 |
| Pino 55 | PD9 — GPIO / FSMC_D11 |
| Pino 56 | PD10 — GPIO / FSMC_D12 |
| Pino 57 | PD11 — GPIO / FSMC_D13 |
| Pino 58 | PD12 — GPIO / FSMC_D14 |
| Pino 59 | PD13 — GPIO / FSMC_D15 |
| Pino 60 | PD14 — GPIO / FSMC_D0 |
| Pino 61 | PD15 — GPIO / FSMC_D1 |
| Pino 62 | VSS — Ground |
| Pino 63 | VDD — Power supply |
| Pino 64 | PC0 — GPIO / ADC_IN10 |
| Pino 65 | PC1 — GPIO / ADC_IN11 |
| Pino 66 | PC2 — GPIO / ADC_IN12 |
| Pino 67 | PC3 — GPIO / ADC_IN13 |
| Pino 68 | PC4 — GPIO / ADC_IN14 |
| Pino 69 | PC5 — GPIO / ADC_IN15 |
| Pino 70 | PB0 — GPIO / ADC_IN8 |
| Pino 71 | PB1 — GPIO / ADC_IN9 |
| Pino 72 | PB2 — GPIO / BOOT1 |
| Pino 73 | PB3 — GPIO / JTDO |
| Pino 74 | PB4 — GPIO / NJTRST |
| Pino 75 | PB5 — GPIO |
| Pino 76 | PB6 — GPIO / I2C1_SCL |
| Pino 77 | PB7 — GPIO / I2C1_SDA |
| Pino 78 | PB8 — GPIO / I2C1_SCL |
| Pino 79 | PB9 — GPIO / I2C1_SDA |
| Pino 80 | VSS — Ground |
| Pino 81 | VDD — Power supply |
| Pino 82 | PB10 — GPIO / I2C2_SCL |
| Pino 83 | PB11 — GPIO / I2C2_SDA |
| Pino 84 | PB12 — GPIO / SPI2_NSS |
| Pino 85 | PB13 — GPIO / SPI2_SCK |
| Pino 86 | PB14 — GPIO / SPI2_MISO |
| Pino 87 | PB15 — GPIO / SPI2_MOSI |
| Pino 88 | PD8 — GPIO / USART3_TX |
| Pino 89 | PD9 — GPIO / USART3_RX |
| Pino 90 | PD10 — GPIO / USART3_CK |
| Pino 91 | PD11 — GPIO / USART3_CTS |
| Pino 92 | PD12 — GPIO / USART3_RTS |
| Pino 93 | PD13 — GPIO / USART3_DE |
| Pino 94 | PD14 — GPIO / USART3_IRDA |
| Pino 95 | PD15 — GPIO / USART3_IRDA |
| Pino 96 | VSS — Ground |
| Pino 97 | VDD — Power supply |
| Pino 98 | PE0 — GPIO / TIM4_ETR |
| Pino 99 | PE1 — GPIO / TIM4_CH1 |
| Pino 100 | PE2 — GPIO / TIM4_CH2 |
| Pino 101 | PE3 — GPIO / TIM4_CH3 |
| Pino 102 | PE4 — GPIO / TIM4_CH4 |
| Pino 103 | PE5 — GPIO / TIM9_CH1 |
| Pino 104 | PE6 — GPIO / TIM9_CH2 |
| Pino 105 | PE7 — GPIO / TIM1_ETR |
| Pino 106 | PE8 — GPIO / TIM1_CH1 |
| Pino 107 | PE9 — GPIO / TIM1_CH2 |
| Pino 108 | PE10 — GPIO / TIM1_CH3 |
| Pino 109 | PE11 — GPIO / TIM1_CH4 |
| Pino 110 | PE12 — GPIO / TIM1_CH1N |
| Pino 111 | PE13 — GPIO / TIM1_CH2N |
| Pino 112 | PE14 — GPIO / TIM1_CH3N |
| Pino 113 | PE15 — GPIO / TIM1_CH4N |
| Pino 114 | VSS — Ground |
| Pino 115 | VDD — Power supply |
| Pino 116 | PA0 — GPIO / ADC_IN0 / WKUP |
| Pino 117 | PA1 — GPIO / ADC_IN1 |
| Pino 118 | PA2 — GPIO / ADC_IN2 / USART2_TX |
| Pino 119 | PA3 — GPIO / ADC_IN3 / USART2_RX |
| Pino 120 | PA4 — GPIO / ADC_IN4 / SPI1_NSS |
| Pino 121 | PA5 — GPIO / ADC_IN5 / SPI1_SCK |
| Pino 122 | PA6 — GPIO / ADC_IN6 / SPI1_MISO |
| Pino 123 | PA7 — GPIO / ADC_IN7 / SPI1_MOSI |
| Pino 124 | PA8 — GPIO / TIM1_CH1 |
| Pino 125 | PA9 — GPIO / TIM1_CH2 / USART1_TX |
| Pino 126 | PA10 — GPIO / TIM1_CH3 / USART1_RX |
| Pino 127 | PA11 — GPIO / TIM1_CH4 / USB_DM |
| Pino 128 | PA12 — GPIO / TIM1_ETR / USB_DP |
| Pino 129 | PA13 — GPIO / JTMS-SWDIO |
| Pino 130 | PA14 — GPIO / JTCK-SWCLK |
| Pino 131 | PA15 — GPIO / JTDI |
| Pino 132 | VSS — Ground |
| Pino 133 | VDD — Power supply |
| Pino 134 | PC10 — GPIO / UART4_TX |
| Pino 135 | PC11 — GPIO / UART4_RX |
| Pino 136 | PC12 — GPIO / UART5_TX |
| Pino 137 | PC13 — GPIO / RTC_AF1 |
| Pino 138 | PC14 — GPIO / OSC32_IN |
| Pino 139 | PC15 — GPIO / OSC32_OUT |
| Pino 140 | PH0 — GPIO / OSC_IN |
| Pino 141 | PH1 — GPIO / OSC_OUT |
| Pino 142 | NRST — Reset (active low) |
| Pino 143 | VSS — Ground |
| Pino 144 | VDD — Power supply |
Aplicações típicas
STM32F207ZET6 é adequado para 6 aplicaçãos: Industrial Control, IoT Gateway, Medical Devices, Networking Equipment, Motor Control, Point-of-Sale (POS) Terminals.
Industrial Control
The STM32F207ZET6 is ideal for industrial control systems such as PLCs, motor drives, and factory automation. Its 120 MHz Cortex-M3 core, rich timer set, and multiple communication interfaces (CAN, UART, SPI) enable precise real-time control. The device's robust operating temperature range (-40°C to +85°C) and 5V-tolerant I/Os simplify interfacing with industrial sensors and actuators. In a typical PLC, the MCU manages digital I/O scanning, analog input acquisition via the 12-bit ADCs, and communication with HMI over Ethernet or RS-485. The cryptographic accelerator can secure firmware updates and communication protocols, enhancing system security. With 512 KB Flash, complex control algorithms and communication stacks can be stored without external memory. The FMC allows expansion with external SRAM or NOR Flash if needed. The 16-channel DMA offloads data transfers, reducing CPU load for high-speed data logging. Overall, the STM32F207ZET6 provides a balanced combination of performance, connectivity, and reliability for demanding industrial environments.
Recomendado
IoT Gateway
The STM32F207ZET6 is well-suited for IoT gateways that aggregate data from multiple sensors and communicate with the cloud. Its Ethernet MAC and USB OTG HS provide wired connectivity, while external modules can add Wi-Fi or cellular. The cryptographic hardware accelerates TLS/DTLS for secure cloud communication. The 128 KB SRAM supports buffering of sensor data, and the 512 KB Flash can hold a full RTOS, protocol stacks (MQTT, CoAP), and application code. The device's low power modes (Sleep, Stop, Standby) enable energy-efficient operation when idle. In a typical gateway, the MCU collects data from sensors via UART, SPI, or I2C, processes it, and forwards it to the cloud over Ethernet. The TRNG ensures secure key generation for authentication. The camera interface can support video streaming in advanced gateways. With its rich connectivity and security features, the STM32F207ZET6 is a cost-effective choice for industrial IoT gateways.
Recomendado
Medical Devices
The STM32F207ZET6 is used in medical devices such as patient monitors, infusion pumps, and diagnostic equipment. Its high performance and rich analog peripherals (3x 12-bit ADCs, 2x DACs) enable precise signal acquisition and control. The device's reliability and long-term availability make it suitable for medical applications. In a patient monitor, the MCU acquires ECG, SpO2, and blood pressure signals via the ADCs, processes them with digital filters, and displays waveforms on an LCD. The Ethernet or USB interface allows data transfer to a central monitoring system. The cryptographic accelerator can secure patient data in compliance with regulations. The 512 KB Flash accommodates complex algorithms and user interfaces. The device's low power consumption is beneficial for portable devices. With its combination of performance, analog integration, and security, the STM32F207ZET6 meets the stringent requirements of medical electronics.
Recomendado
Networking Equipment
The STM32F207ZET6 is suitable for networking equipment such as routers, switches, and network interface cards. Its Ethernet MAC supports 10/100 Mbps, and the device can handle protocol processing for TCP/IP, UDP, and other stacks. The cryptographic accelerator enables IPsec and SSL/TLS acceleration. In a managed switch, the MCU manages the switch fabric, handles SNMP, and provides a web interface. The 128 KB SRAM is sufficient for packet buffering, and the DMA channels efficiently move data between Ethernet and memory. The device's multiple UARTs and SPI interfaces allow connection to PHYs and other peripherals. The STM32F207ZET6's performance and connectivity make it a solid choice for cost-sensitive networking applications.
Recomendado
Motor Control
The STM32F207ZET6 is well-suited for motor control applications, including brushless DC (BLDC), permanent magnet synchronous (PMSM), and stepper motors. Its advanced timer peripherals generate PWM signals with dead-time insertion, and the 12-bit ADCs sample phase currents and rotor position. The 120 MHz Cortex-M3 core executes field-oriented control (FOC) algorithms efficiently. In a typical BLDC motor drive, the MCU reads Hall sensors or encoder feedback, computes the commutation sequence, and generates six-step PWM signals. The ADC channels measure phase currents for closed-loop control. The device's CAN interface allows networking with other drives in a multi-axis system. The cryptographic accelerator can secure firmware updates. With its rich timer and analog features, the STM32F207ZET6 provides a complete motor control solution.
Recomendado
Point-of-Sale (POS) Terminals
The STM32F207ZET6 is used in POS terminals for payment processing, inventory management, and customer interaction. Its USB OTG HS supports high-speed communication with peripherals like barcode scanners and receipt printers. The cryptographic accelerator enables secure payment transactions (EMV, PCI-DSS). The device's rich connectivity (Ethernet, USB, UART) allows integration with various payment networks. In a POS terminal, the MCU manages the touchscreen display, reads card data via a magnetic stripe reader or contactless interface, and communicates with the payment gateway over Ethernet or Wi-Fi. The 512 KB Flash stores the application and transaction logs. The device's security features protect sensitive data. With its performance and security, the STM32F207ZET6 is a reliable choice for POS systems.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32F207ZET6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32F207ZGT6 | STM32F407ZET6 | STM32F405ZET6 | LPC1788FBD208 |
|---|---|---|---|---|---|
| Package | LQFP144 | LQFP144 | LQFP144 | LQFP144 | LQFP208 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | NXP Semiconductors |
| Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M3 |
| Max Clock Frequency | 120 MHz | 120 MHz | 168 MHz | 168 MHz | 120 MHz |
| Flash Memory | 512 KB | 1 MB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 192 KB | 192 KB | 96 KB |
| Ethernet MAC | Yes | Yes | Yes | No | Yes |
| USB OTG HS | Yes | Yes | Yes | Yes | Yes |
| Cryptographic Acceleration | Yes | Yes | Yes | Yes | No |
Principais diferenciais
- Higher Flash capacity option (vs STM32F207ZET6 vs STM32F207ZGT6)
- Cortex-M4 upgrade path (vs STM32F207ZET6 vs STM32F407ZET6)
- Integrated Ethernet and crypto (vs STM32F207ZET6 vs LPC1788FBD208)
Notas de projeto
Decouple each VDD pin with a 100nF ceramic capacitor placed as close as possible to the pin. Add a 4.7uF bulk capacitor on the main supply. For VDDA, use a ferrite bead and a 1uF capacitor to filter analog noise. Ensure VDD and VDDA are connected through a low-impedance path.
For the LQFP144 package, use a 4-layer PCB with a solid ground plane. Route high-speed signals (Ethernet, USB) with controlled impedance (e.g., 90 ohms differential for USB). Keep crystal oscillator traces short and away from noisy signals. Place the decoupling capacitors on the bottom side directly under the MCU if possible.
Ensure the BOOT0 pin is correctly configured to boot from Flash (tied low). Do not leave NRST floating; connect a 100nF capacitor to ground. For Ethernet, use a magnetics module with proper termination. When using the cryptographic accelerator, ensure the clock is enabled and the TRNG is seeded correctly.
Informações de conformidade
RoHS compliant per ST product page. Not AEC-Q100 qualified; for automotive, consider STM32F207ZET6Q or other automotive-grade variants.
