STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
N.º da peça: STM32F413ZHT3 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $14.92 | $14,92 |
| 10 | $13.43 | $134,30 |
| 100 | $11.65 | $1.165,00 |
| 500 | $10.5 | $5.250,00 |
| 1.000 | $9.18 | $9.180,00 |
STM32F413ZHT3 Visão geral
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
Alternativas drop-in para STM32F413ZHT3 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32F413ZHT3 (mesmo formato e footprint) — diferindo em ADC, Communication Interfaces, Core, Package, SRAM.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STM32F413ZHJ6
✅ Drop-In✓ Em estoque
$9.4 / unidade
Ver ficha técnica →STM32F423ZHT6
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32F407VGT6
✅ Drop-In✓ Em estoque
$7.55 / unidade
Ver ficha técnica →STM32F413ZHT3 Classificações máximas e características elétricas
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| Encapsulamento | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| Temperatura de operação | -40C to +125C (industrial grade) |
| Status RoHS | Compliant |
Configuração de pinos do STM32F413ZHT3
| Pino 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| Pino 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| Pino 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| Pino 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| Pino 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| Pino 6 | VBAT — Battery backup power supply |
| Pino 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| Pino 8 | PC14 — GPIO PC14 / OSC32_IN |
| Pino 9 | PC15 — GPIO PC15 / OSC32_OUT |
| Pino 10 | VSS — Ground |
| Pino 11 | VDD — Digital power supply 1.7-3.6 V |
| Pino 12 | OSC_IN — HSE oscillator input |
| Pino 13 | OSC_OUT — HSE oscillator output |
| Pino 14 | NRST — Reset input, active low |
| Pino 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| Pino 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| Pino 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| Pino 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| Pino 19 | VREF+ — ADC positive reference voltage |
| Pino 20 | VDDA — Analog power supply |
| Pino 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| Pino 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| Pino 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| Pino 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| Pino 25 | VSS — Ground |
| Pino 26 | VDD — Digital power supply 1.7-3.6 V |
| Pino 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| Pino 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| Pino 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| Pino 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| Pino 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| Pino 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| Pino 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| Pino 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| Pino 35 | PB2 — GPIO PB2 / BOOT1 |
| Pino 36 | PE7 — GPIO PE7 / FSMC_D4 |
| Pino 37 | PE8 — GPIO PE8 / FSMC_D5 |
| Pino 38 | PE9 — GPIO PE9 / FSMC_D6 |
| Pino 39 | PE10 — GPIO PE10 / FSMC_D7 |
| Pino 40 | PE11 — GPIO PE11 / FSMC_D8 |
| Pino 41 | PE12 — GPIO PE12 / FSMC_D9 |
| Pino 42 | PE13 — GPIO PE13 / FSMC_D10 |
| Pino 43 | PE14 — GPIO PE14 / FSMC_D11 |
| Pino 44 | PE15 — GPIO PE15 / FSMC_D12 |
| Pino 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| Pino 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| Pino 47 | VSS — Ground |
| Pino 48 | VDD — Digital power supply 1.7-3.6 V |
| Pino 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| Pino 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| Pino 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| Pino 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| Pino 53 | PD8 — GPIO PD8 / FSMC_D13 |
| Pino 54 | PD9 — GPIO PD9 / FSMC_D14 |
| Pino 55 | PD10 — GPIO PD10 / FSMC_D15 |
| Pino 56 | PD11 — GPIO PD11 / FSMC_A16 |
| Pino 57 | PD12 — GPIO PD12 / FSMC_A17 |
| Pino 58 | PD13 — GPIO PD13 / FSMC_A18 |
| Pino 59 | PD14 — GPIO PD14 / FSMC_D0 |
| Pino 60 | PD15 — GPIO PD15 / FSMC_D1 |
| Pino 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| Pino 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| Pino 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| Pino 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| Pino 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| Pino 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| Pino 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| Pino 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| Pino 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| Pino 70 | PA13 — GPIO PA13 / SWDIO |
| Pino 71 | VSS — Ground |
| Pino 72 | VDD — Digital power supply 1.7-3.6 V |
| Pino 73 | PA14 — GPIO PA14 / SWCLK |
| Pino 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| Pino 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| Pino 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| Pino 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| Pino 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| Pino 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| Pino 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| Pino 81 | PD3 — GPIO PD3 / FSMC_CLK |
| Pino 82 | PD4 — GPIO PD4 / FSMC_NOE |
| Pino 83 | PD5 — GPIO PD5 / FSMC_NWE |
| Pino 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| Pino 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| Pino 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| Pino 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| Pino 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| Pino 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| Pino 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| Pino 91 | BOOT0 — Boot mode select |
| Pino 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| Pino 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| Pino 94 | PE0 — GPIO PE0 / TIM4_ETR |
| Pino 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| Pino 96 | VSS — Ground |
| Pino 97 | VDD — Digital power supply 1.7-3.6 V |
| Pino 98 | PF0 — GPIO PF0 / FSMC_A0 |
| Pino 99 | PF1 — GPIO PF1 / FSMC_A1 |
| Pino 100 | PF2 — GPIO PF2 / FSMC_A2 |
| Pino 101 | PF3 — GPIO PF3 / FSMC_A3 |
| Pino 102 | PF4 — GPIO PF4 / FSMC_A4 |
| Pino 103 | PF5 — GPIO PF5 / FSMC_A5 |
| Pino 104 | VSS — Ground |
| Pino 105 | VDD — Digital power supply 1.7-3.6 V |
| Pino 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| Pino 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| Pino 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| Pino 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| Pino 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| Pino 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| Pino 112 | PF12 — GPIO PF12 / FSMC_A6 |
| Pino 113 | PF13 — GPIO PF13 / FSMC_A7 |
| Pino 114 | PF14 — GPIO PF14 / FSMC_A8 |
| Pino 115 | PF15 — GPIO PF15 / FSMC_A9 |
| Pino 116 | PG0 — GPIO PG0 / FSMC_A10 |
| Pino 117 | PG1 — GPIO PG1 / FSMC_A11 |
| Pino 118 | PE2 — GPIO PE2 / FSMC_A23 |
| Pino 119 | PE3 — GPIO PE3 / FSMC_A19 |
| Pino 120 | PE4 — GPIO PE4 / FSMC_A20 |
| Pino 121 | PE5 — GPIO PE5 / FSMC_A21 |
| Pino 122 | PE6 — GPIO PE6 / FSMC_A22 |
| Pino 123 | VSS — Ground |
| Pino 124 | VDD — Digital power supply 1.7-3.6 V |
| Pino 125 | PG2 — GPIO PG2 / FSMC_A12 |
| Pino 126 | PG3 — GPIO PG3 / FSMC_A13 |
| Pino 127 | PG4 — GPIO PG4 / FSMC_A14 |
| Pino 128 | PG5 — GPIO PG5 / FSMC_A15 |
| Pino 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| Pino 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| Pino 131 | PG8 — GPIO PG8 |
| Pino 132 | VSS — Ground |
| Pino 133 | VDD — Digital power supply 1.7-3.6 V |
| Pino 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| Pino 135 | PA0 — GPIO PA0 / WKUP |
| Pino 136 | PA1 — GPIO PA1 |
| Pino 137 | PA2 — GPIO PA2 |
| Pino 138 | PA3 — GPIO PA3 |
| Pino 139 | VSS — Ground |
| Pino 140 | VDD — Digital power supply 1.7-3.6 V |
| Pino 141 | PA4 — GPIO PA4 |
| Pino 142 | PA5 — GPIO PA5 |
| Pino 143 | PB6 — GPIO PB6 |
| Pino 144 | PB7 — GPIO PB7 |
Aplicações típicas
STM32F413ZHT3 é adequado para 6 aplicaçãos: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
Recomendado
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
Recomendado
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
Recomendado
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
Recomendado
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
Recomendado
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32F413ZHT3 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
Principais diferenciais
- Dual DFSDM digital filter blocks for sigma-delta modulators (vs STM32F407VGT6)
- USB OTG Full-Speed with internal PHY (vs STM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (vs STM32F407VGT6)
Notas de projeto
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
Informações de conformidade
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
