STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
MPN: STM32F413ZHT3 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $14.92 | $14.92 |
| 10 | $13.43 | $134.30 |
| 100 | $11.65 | $1,165.00 |
| 500 | $10.5 | $5,250.00 |
| 1,000 | $9.18 | $9,180.00 |
STM32F413ZHT3 Overview
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
Drop-in alternatives for STM32F413ZHT3 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with STM32F413ZHT3 (same form factor and footprint) — differing in ADC, Communication Interfaces, Core, Package, SRAM.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
STM32F413ZHJ6
✅ Drop-In✓ In Stock
$9.4 / Unit
View Datasheet →STM32F423ZHT6
✅ Drop-In📋 Reference alternative (not in catalog)
STM32F407VGT6
✅ Drop-In✓ In Stock
$7.55 / Unit
View Datasheet →STM32F413ZHT3 Maximum Ratings & Electrical Characteristics
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| Package | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| Operating Temperature | -40C to +125C (industrial grade) |
| RoHS Status | Compliant |
STM32F413ZHT3 Pin Configuration
| Pin 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| Pin 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| Pin 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| Pin 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| Pin 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| Pin 6 | VBAT — Battery backup power supply |
| Pin 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| Pin 8 | PC14 — GPIO PC14 / OSC32_IN |
| Pin 9 | PC15 — GPIO PC15 / OSC32_OUT |
| Pin 10 | VSS — Ground |
| Pin 11 | VDD — Digital power supply 1.7-3.6 V |
| Pin 12 | OSC_IN — HSE oscillator input |
| Pin 13 | OSC_OUT — HSE oscillator output |
| Pin 14 | NRST — Reset input, active low |
| Pin 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| Pin 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| Pin 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| Pin 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| Pin 19 | VREF+ — ADC positive reference voltage |
| Pin 20 | VDDA — Analog power supply |
| Pin 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| Pin 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| Pin 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| Pin 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| Pin 25 | VSS — Ground |
| Pin 26 | VDD — Digital power supply 1.7-3.6 V |
| Pin 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| Pin 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| Pin 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| Pin 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| Pin 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| Pin 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| Pin 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| Pin 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| Pin 35 | PB2 — GPIO PB2 / BOOT1 |
| Pin 36 | PE7 — GPIO PE7 / FSMC_D4 |
| Pin 37 | PE8 — GPIO PE8 / FSMC_D5 |
| Pin 38 | PE9 — GPIO PE9 / FSMC_D6 |
| Pin 39 | PE10 — GPIO PE10 / FSMC_D7 |
| Pin 40 | PE11 — GPIO PE11 / FSMC_D8 |
| Pin 41 | PE12 — GPIO PE12 / FSMC_D9 |
| Pin 42 | PE13 — GPIO PE13 / FSMC_D10 |
| Pin 43 | PE14 — GPIO PE14 / FSMC_D11 |
| Pin 44 | PE15 — GPIO PE15 / FSMC_D12 |
| Pin 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| Pin 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| Pin 47 | VSS — Ground |
| Pin 48 | VDD — Digital power supply 1.7-3.6 V |
| Pin 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| Pin 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| Pin 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| Pin 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| Pin 53 | PD8 — GPIO PD8 / FSMC_D13 |
| Pin 54 | PD9 — GPIO PD9 / FSMC_D14 |
| Pin 55 | PD10 — GPIO PD10 / FSMC_D15 |
| Pin 56 | PD11 — GPIO PD11 / FSMC_A16 |
| Pin 57 | PD12 — GPIO PD12 / FSMC_A17 |
| Pin 58 | PD13 — GPIO PD13 / FSMC_A18 |
| Pin 59 | PD14 — GPIO PD14 / FSMC_D0 |
| Pin 60 | PD15 — GPIO PD15 / FSMC_D1 |
| Pin 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| Pin 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| Pin 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| Pin 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| Pin 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| Pin 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| Pin 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| Pin 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| Pin 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| Pin 70 | PA13 — GPIO PA13 / SWDIO |
| Pin 71 | VSS — Ground |
| Pin 72 | VDD — Digital power supply 1.7-3.6 V |
| Pin 73 | PA14 — GPIO PA14 / SWCLK |
| Pin 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| Pin 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| Pin 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| Pin 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| Pin 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| Pin 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| Pin 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| Pin 81 | PD3 — GPIO PD3 / FSMC_CLK |
| Pin 82 | PD4 — GPIO PD4 / FSMC_NOE |
| Pin 83 | PD5 — GPIO PD5 / FSMC_NWE |
| Pin 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| Pin 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| Pin 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| Pin 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| Pin 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| Pin 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| Pin 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| Pin 91 | BOOT0 — Boot mode select |
| Pin 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| Pin 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| Pin 94 | PE0 — GPIO PE0 / TIM4_ETR |
| Pin 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| Pin 96 | VSS — Ground |
| Pin 97 | VDD — Digital power supply 1.7-3.6 V |
| Pin 98 | PF0 — GPIO PF0 / FSMC_A0 |
| Pin 99 | PF1 — GPIO PF1 / FSMC_A1 |
| Pin 100 | PF2 — GPIO PF2 / FSMC_A2 |
| Pin 101 | PF3 — GPIO PF3 / FSMC_A3 |
| Pin 102 | PF4 — GPIO PF4 / FSMC_A4 |
| Pin 103 | PF5 — GPIO PF5 / FSMC_A5 |
| Pin 104 | VSS — Ground |
| Pin 105 | VDD — Digital power supply 1.7-3.6 V |
| Pin 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| Pin 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| Pin 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| Pin 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| Pin 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| Pin 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| Pin 112 | PF12 — GPIO PF12 / FSMC_A6 |
| Pin 113 | PF13 — GPIO PF13 / FSMC_A7 |
| Pin 114 | PF14 — GPIO PF14 / FSMC_A8 |
| Pin 115 | PF15 — GPIO PF15 / FSMC_A9 |
| Pin 116 | PG0 — GPIO PG0 / FSMC_A10 |
| Pin 117 | PG1 — GPIO PG1 / FSMC_A11 |
| Pin 118 | PE2 — GPIO PE2 / FSMC_A23 |
| Pin 119 | PE3 — GPIO PE3 / FSMC_A19 |
| Pin 120 | PE4 — GPIO PE4 / FSMC_A20 |
| Pin 121 | PE5 — GPIO PE5 / FSMC_A21 |
| Pin 122 | PE6 — GPIO PE6 / FSMC_A22 |
| Pin 123 | VSS — Ground |
| Pin 124 | VDD — Digital power supply 1.7-3.6 V |
| Pin 125 | PG2 — GPIO PG2 / FSMC_A12 |
| Pin 126 | PG3 — GPIO PG3 / FSMC_A13 |
| Pin 127 | PG4 — GPIO PG4 / FSMC_A14 |
| Pin 128 | PG5 — GPIO PG5 / FSMC_A15 |
| Pin 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| Pin 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| Pin 131 | PG8 — GPIO PG8 |
| Pin 132 | VSS — Ground |
| Pin 133 | VDD — Digital power supply 1.7-3.6 V |
| Pin 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| Pin 135 | PA0 — GPIO PA0 / WKUP |
| Pin 136 | PA1 — GPIO PA1 |
| Pin 137 | PA2 — GPIO PA2 |
| Pin 138 | PA3 — GPIO PA3 |
| Pin 139 | VSS — Ground |
| Pin 140 | VDD — Digital power supply 1.7-3.6 V |
| Pin 141 | PA4 — GPIO PA4 |
| Pin 142 | PA5 — GPIO PA5 |
| Pin 143 | PB6 — GPIO PB6 |
| Pin 144 | PB7 — GPIO PB7 |
Typical Applications
STM32F413ZHT3 is suitable for 6 applications: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
Recommended
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
Recommended
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
Recommended
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
Recommended
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
Recommended
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
Recommended
Recommended Products Summary
Engineering reference data for STM32F413ZHT3 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
Key Differentiators
- Dual DFSDM digital filter blocks for sigma-delta modulators (vs STM32F407VGT6)
- USB OTG Full-Speed with internal PHY (vs STM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (vs STM32F407VGT6)
Design Notes
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
Compliance Information
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
