STM32H7A3VGT6 - 280MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
N.º da peça: STM32H7A3VGT6 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.25 | $112,50 |
| 100 | $10 | $1.000,00 |
| 500 | $9 | $4.500,00 |
| 1.000 | $8.1 | $8.100,00 |
STM32H7A3VGT6 Visão geral
What is a microcontroller (MCU)? A microcontroller is a compact integrated circuit that combines a processor core, memory, and programmable input/output peripherals on a single chip. It is the brain of embedded systems, executing firmware to control devices, process sensor data, and communicate with other systems. MCUs are classified within the broader hierarchy of embedded processors, which includes microprocessors, digital signal processors (DSPs), and system-on-chips (SoCs). The STM32H7A3VGT6 sits at the high-performance end of the MCU spectrum, offering near-DSP-level compute capability.
Key features include a 280 MHz Arm Cortex-M7 core with double-precision FPU, 1.4 MB flash, 1.4 MB SRAM, and a rich set of peripherals: multiple 16-bit and 32-bit timers, 12-bit ADCs, 12-bit DACs, and advanced communication interfaces (USART, SPI, I2C, FDCAN, USB OTG, Ethernet MAC). The device also integrates a hardware cryptographic accelerator (AES, DES, 3DES, SHA-1, SHA-256) and a true random number generator (TRNG) for secure applications.
Technically, the STM32H7A3VGT6 is built on a 40nm process, enabling high clock speeds with moderate power consumption. The Cortex-M7 core features a 6-stage pipeline, branch prediction, and a memory protection unit (MPU), supporting real-time deterministic execution. The device supports external memory interfaces (FMC) for SDRAM, NOR, and NAND flash expansion, and a flexible memory controller for parallel and serial interfaces.
Typical applications include industrial automation (PLC, motor control), medical devices (patient monitors, infusion pumps), consumer electronics (smart speakers, wearables), and IoT gateways. The high core speed and rich peripherals make it suitable for real-time control, audio processing, and edge AI inference.
When designing with this device, ensure adequate decoupling on all power pins and a proper crystal oscillator layout for the HSE. The 100-pin LQFP package requires careful thermal management; use a 4-layer PCB with a solid ground plane to dissipate heat effectively.
Alternativas drop-in para STM32H7A3VGT6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32H7A3VGT6 (mesmo formato e footprint) — diferindo em Package, Operating Temperature, SRAM, Flash Memory, RoHS Status.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STM32H7A3VIT6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$10.45 / unidade
Ver ficha técnica →STM32H750VBT6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.25 / unidade
Ver ficha técnica →STM32H743VIT6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$7.98 / unidade
Ver ficha técnica →STM32H753VIT6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32H7A3VGT6 Classificações máximas e características elétricas
| Core | Arm Cortex-M7 |
| Max Clock Speed | 280 MHz |
| Flash Memory | 1.4 MB |
| SRAM | 1.4 MB |
| Encapsulamento | LQFP-100 (14x14 mm) |
| Operating Voltage | 1.62 V to 3.6 V |
| GPIO Pins | 80 |
| ADC | 3x 12-bit, up to 3.6 MSPS |
| DAC | 2x 12-bit |
| Timers | 22 (16-bit and 32-bit) |
| Communication Interfaces | USART, SPI, I2C, FDCAN, USB OTG, Ethernet MAC |
| Cryptographic Acceleration | AES, DES, 3DES, SHA-1, SHA-256 |
| Temperatura de operação | -40C to +85C |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do STM32H7A3VGT6
| Pino 1 | VBAT — Battery backup supply |
| Pino 2 | PC13 — GPIO / RTC output |
| Pino 3 | PC14 — GPIO / OSC32_IN |
| Pino 4 | PC15 — GPIO / OSC32_OUT |
| Pino 5 | PF0 — GPIO |
| Pino 6 | PF1 — GPIO |
| Pino 7 | PF2 — GPIO |
| Pino 8 | PF3 — GPIO |
| Pino 9 | PF4 — GPIO |
| Pino 10 | PF5 — GPIO |
| Pino 11 | VSS — Ground |
| Pino 12 | VDD — Power supply |
| Pino 13 | PF6 — GPIO |
| Pino 14 | PF7 — GPIO |
| Pino 15 | PF8 — GPIO |
| Pino 16 | PF9 — GPIO |
| Pino 17 | PF10 — GPIO |
| Pino 18 | PF11 — GPIO |
| Pino 19 | PF12 — GPIO |
| Pino 20 | PF13 — GPIO |
| Pino 21 | PF14 — GPIO |
| Pino 22 | PF15 — GPIO |
| Pino 23 | VSS — Ground |
| Pino 24 | VDD — Power supply |
| Pino 25 | PG0 — GPIO |
| Pino 26 | PG1 — GPIO |
| Pino 27 | PG2 — GPIO |
| Pino 28 | PG3 — GPIO |
| Pino 29 | PG4 — GPIO |
| Pino 30 | PG5 — GPIO |
| Pino 31 | PG6 — GPIO |
| Pino 32 | PG7 — GPIO |
| Pino 33 | PG8 — GPIO |
| Pino 34 | PG9 — GPIO |
| Pino 35 | PG10 — GPIO |
| Pino 36 | PG11 — GPIO |
| Pino 37 | PG12 — GPIO |
| Pino 38 | PG13 — GPIO |
| Pino 39 | PG14 — GPIO |
| Pino 40 | PG15 — GPIO |
| Pino 41 | VSS — Ground |
| Pino 42 | VDD — Power supply |
| Pino 43 | PH0 — GPIO / OSC_IN |
| Pino 44 | PH1 — GPIO / OSC_OUT |
| Pino 45 | PH2 — GPIO |
| Pino 46 | PH3 — GPIO |
| Pino 47 | PH4 — GPIO |
| Pino 48 | PH5 — GPIO |
| Pino 49 | PH6 — GPIO |
| Pino 50 | PH7 — GPIO |
| Pino 51 | PH8 — GPIO |
| Pino 52 | PH9 — GPIO |
| Pino 53 | PH10 — GPIO |
| Pino 54 | PH11 — GPIO |
| Pino 55 | PH12 — GPIO |
| Pino 56 | PH13 — GPIO |
| Pino 57 | PH14 — GPIO |
| Pino 58 | PH15 — GPIO |
| Pino 59 | VSS — Ground |
| Pino 60 | VDD — Power supply |
| Pino 61 | PI0 — GPIO |
| Pino 62 | PI1 — GPIO |
| Pino 63 | PI2 — GPIO |
| Pino 64 | PI3 — GPIO |
| Pino 65 | PI4 — GPIO |
| Pino 66 | PI5 — GPIO |
| Pino 67 | PI6 — GPIO |
| Pino 68 | PI7 — GPIO |
| Pino 69 | PI8 — GPIO |
| Pino 70 | PI9 — GPIO |
| Pino 71 | VSS — Ground |
| Pino 72 | VDD — Power supply |
| Pino 73 | PA0 — GPIO / ADC |
| Pino 74 | PA1 — GPIO / ADC |
| Pino 75 | PA2 — GPIO / USART |
| Pino 76 | PA3 — GPIO / USART |
| Pino 77 | PA4 — GPIO / DAC |
| Pino 78 | PA5 — GPIO / DAC |
| Pino 79 | PA6 — GPIO / SPI |
| Pino 80 | PA7 — GPIO / SPI |
| Pino 81 | PA8 — GPIO / TIM |
| Pino 82 | PA9 — GPIO / USART |
| Pino 83 | PA10 — GPIO / USART |
| Pino 84 | PA11 — GPIO / USB |
| Pino 85 | PA12 — GPIO / USB |
| Pino 86 | PA13 — GPIO / SWDIO |
| Pino 87 | PA14 — GPIO / SWCLK |
| Pino 88 | PA15 — GPIO / JTAG |
| Pino 89 | VSS — Ground |
| Pino 90 | VDD — Power supply |
| Pino 91 | PB0 — GPIO / ADC |
| Pino 92 | PB1 — GPIO / ADC |
| Pino 93 | PB2 — GPIO |
| Pino 94 | PB3 — GPIO / SPI |
| Pino 95 | PB4 — GPIO / SPI |
| Pino 96 | PB5 — GPIO / I2C |
| Pino 97 | PB6 — GPIO / I2C |
| Pino 98 | PB7 — GPIO / I2C |
| Pino 99 | PB8 — GPIO / FDCAN |
| Pino 100 | PB9 — GPIO / FDCAN |
Aplicações típicas
STM32H7A3VGT6 é adequado para 6 aplicaçãos: Industrial Automation, Medical Devices, IoT Gateways, Consumer Electronics, Audio Processing, Edge AI.
Industrial Automation
The STM32H7A3VGT6 is ideal for industrial automation due to its 280 MHz Cortex-M7 core, rich communication interfaces (FDCAN, Ethernet MAC, USART), and advanced timers for precise motor control. It can handle real-time control loops, PLC logic, and HMI interfaces simultaneously. The device's 1.4 MB flash and 1.4 MB SRAM provide ample space for complex firmware, while the cryptographic accelerator ensures secure communication in industrial networks. Its wide operating voltage range (1.62V to 3.6V) and -40C to +85C temperature range make it suitable for harsh factory environments. The FMC interface allows external memory expansion for data logging, and the multiple ADCs enable high-speed sensor acquisition for process monitoring.
Recomendado
Medical Devices
In medical devices, the STM32H7A3VGT6 provides the computational power and reliability required for patient monitoring, infusion pumps, and diagnostic equipment. The 280 MHz core enables real-time signal processing for ECG, SpO2, and blood pressure monitoring. The device's low power consumption in sleep modes extends battery life in portable devices. The cryptographic accelerator ensures secure data transmission for patient privacy compliance. The multiple timers and ADCs support precise sensor interfacing, while the Ethernet MAC enables connectivity to hospital networks. The device's robust design, with a wide temperature range and high reliability, meets the stringent requirements of medical applications.
Recomendado
IoT Gateways
The STM32H7A3VGT6 is well-suited for IoT gateways, offering a balance of performance and connectivity. The Ethernet MAC and USB OTG interfaces enable wired and wireless connectivity, while the cryptographic accelerator secures data transmission. The 280 MHz core can handle protocol stacks (MQTT, CoAP) and edge processing. The 1.4 MB flash and 1.4 MB SRAM support complex applications and data buffering. The device's multiple UARTs and SPIs allow connection to various sensors and radios (Wi-Fi, LoRa, Zigbee). Its low power modes are beneficial for always-on gateways, and the FMC interface can expand storage for local data logging.
Recomendado
Consumer Electronics
For consumer electronics, the STM32H7A3VGT6 delivers high performance for audio processing, smart home devices, and wearables. The 280 MHz Cortex-M7 with FPU enables audio codec processing and voice recognition. The device's rich peripheral set supports touchscreens, displays, and various sensors. The low power consumption in standby mode extends battery life in portable devices. The cryptographic accelerator enables secure firmware updates and data protection. The device's small LQFP-100 package is suitable for compact designs, and the multiple communication interfaces allow connectivity to other devices in the smart home ecosystem.
Recomendado
Audio Processing
The STM32H7A3VGT6 is excellent for audio processing applications, including smart speakers, audio interfaces, and voice-controlled devices. The 280 MHz Cortex-M7 with double-precision FPU can handle real-time audio DSP algorithms, such as filtering, equalization, and noise cancellation. The device's multiple I2S interfaces support high-quality audio codecs, and the DMA controllers enable efficient data transfer without CPU intervention. The 1.4 MB SRAM provides ample buffering for audio streams. The cryptographic accelerator can secure audio content, and the low power modes are beneficial for battery-powered audio devices. The device's high performance and rich audio peripherals make it a top choice for audio applications.
Recomendado
Edge AI
The STM32H7A3VGT6 supports edge AI inference for applications like predictive maintenance, anomaly detection, and image classification. The 280 MHz Cortex-M7 with FPU can run lightweight neural networks using frameworks like TensorFlow Lite for Microcontrollers. The device's 1.4 MB flash and 1.4 MB SRAM provide space for model storage and inference buffers. The multiple ADCs and communication interfaces enable sensor data acquisition for AI models. The cryptographic accelerator ensures secure model updates. The device's low power consumption is beneficial for battery-powered edge devices, and the high performance enables real-time inference for time-critical applications.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32H7A3VGT6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32H7A3VIT6 | STM32H750VBT6 | STM32H743VIT6 | STM32H753VIT6 |
|---|---|---|---|---|---|
| Package | LQFP-100 | LQFP-100 - same | LQFP-100 - same | LQFP-100 - same | LQFP-100 - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Max Clock Speed | 280 MHz | 280 MHz | 480 MHz | 480 MHz | 480 MHz |
| Flash Memory | 1.4 MB | 2 MB | 128 KB | 2 MB | 2 MB |
| SRAM | 1.4 MB | 1.4 MB | 1 MB | 1 MB | 1 MB |
| Operating Voltage | 1.62V to 3.6V | 1.62V to 3.6V | 1.62V to 3.6V | 1.62V to 3.6V | 1.62V to 3.6V |
| GPIO Pins | 80 | 80 | 80 | 80 | 80 |
| Ethernet MAC | Yes | Yes | Yes | Yes | Yes |
Principais diferenciais
- Higher SRAM capacity (1.4 MB) than many competitors (vs STM32H750VBT6)
- Lower power consumption than STM32H743VIT6 (vs STM32H743VIT6)
- Cost-effective balance of performance and memory (vs STM32H7A3VIT6)
Notas de projeto
The STM32H7A3VGT6 operates from 1.62V to 3.6V. Use a dedicated 3.3V rail with a low-dropout regulator (LDO) for the VDD pins, and a separate 1.8V rail for the VDDA analog supply if high ADC accuracy is required. Place 100nF decoupling capacitors on each VDD pin and a 4.7uF bulk capacitor on the main supply. For the VBAT pin, connect a backup battery or tie to VDD through a diode to maintain RTC operation during power loss.
For the LQFP-100 package, use a 4-layer PCB with a solid ground plane directly under the IC. Route the crystal oscillator (HSE) traces as short as possible with a ground guard ring to minimize noise. Place the 8 MHz crystal and load capacitors (typically 10-20pF) close to the PH0/PH1 pins. For the ADC inputs, use a star-ground topology and separate analog ground (VSSA) from digital ground to reduce noise coupling.
The STM32H7A3VGT6 can dissipate significant power at 280 MHz. The LQFP-100 package has a thermal resistance (theta_JA) of approximately 40-50 C/W. For high-current applications, ensure adequate copper pour on the PCB and consider a thermal via array under the exposed pad (if available). Monitor the junction temperature to stay within the -40C to +85C operating range. For continuous operation at maximum clock, a small heatsink or forced airflow may be necessary.
Informações de conformidade
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified - this is a general-purpose MCU, not automotive grade.
