STM32L496VGY6TR - 80MHz Cortex-M4 MCU 1MB Flash WLCSP-100
N.º da peça: STM32L496VGY6TR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $13.95 | $13,95 |
| 10 | $12.56 | $125,60 |
| 100 | $11.04 | $1.104,00 |
| 500 | $9.77 | $4.885,00 |
| 1.000 | $8.92 | $8.920,00 |
STM32L496VGY6TR Visão geral
An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed for embedded applications, featuring low power consumption, deterministic interrupt response, and optional single-precision floating-point unit (FPU). The M4 sits within the broader Cortex-M family hierarchy: Cortex-M0/M3/M4 -> ARMv7-M architecture -> 32-bit MCU -> embedded processor -> semiconductor. The STM32L4 series specifically targets ultra-low-power applications, balancing processing performance with energy efficiency through multiple low-power modes including Shutdown at 25 nA.
Key differentiating features include 1 MB flash, 320 KB SRAM, integrated SMPS step-down converter for dynamic voltage scaling, USB OTG FS, MIPI-DSI or parallel LCD interface support, two 12-bit ADCs at 5 Msps, two 12-bit DACs, DFSDM for audio/sensor applications, AES-256 and Hash accelerators, and the standard STM32 ecosystem (HAL/LL libraries, STM32CubeMX, IDE support). The WLCSP-100 package enables compact wearable and IoT designs where PCB area is critical.
The Cortex-M4F core includes a single-precision FPU that accelerates DSP operations and floating-point math. The internal SMPS regulator improves efficiency over the traditional LDO regulator approach during active mode, enabling higher performance at lower power. The device supports multiple low-power modes (Stop, Standby, Shutdown) with the Shutdown mode consuming only 25 nA for battery-backed IoT endpoints.
Typical applications include wearable fitness trackers, portable medical sensors, industrial IoT sensor nodes, USB-C powered accessories, LCD-based HMI panels, smart home sensor hubs, and audio interfaces leveraging the digital microphone support. The combination of USB OTG, LCD, and ultra-low power makes it particularly suited for battery-powered consumer and medical devices.
When designing with this device, verify that the WLCSP-100 footprint matches your PCB capability (WLCSP requires advanced PCB process for routing and inspection). For prototypes or hand-assembly, consider the LQFP-64 or UFBGA-169 variants of the STM32L496 family instead. Provide a stable VDD and consider the SMPS inductor selection per ST application note AN4621.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing actionable intelligence beyond standard spec repetition.
Alternativas drop-in para STM32L496VGY6TR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32L496VGY6TR (mesmo formato e footprint) — diferindo em Package, ADC, Maximum Clock Frequency, DAC, SRAM.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STM32L496VGT6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$9.5455 / unidade
Ver ficha técnica →STM32L4A6VGT6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L4R9VGI6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L496RGT6
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$6.5 / unidade
Ver ficha técnica →STM32L451VCT6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L496VGY6TR Classificações máximas e características elétricas
| Core Architecture | ARM Cortex-M4F (32-bit) |
| Frequência máxima de clock | 80 MHz |
| DMIPS Performance | 100 DMIPS |
| FPU | Single-precision |
| Flash Memory | 1 MB |
| SRAM | 320 KB |
| Encapsulamento | WLCSP-100 (4.62 x 4.14 mm) |
| Tensão de alimentação | 1.71 V to 3.6 V |
| Shutdown Mode Current | 25 nA typical |
| Temperatura de operação | -40C to +85C (Grade 6) |
| USB | USB OTG FS |
| Display Interface | LCD (parallel) |
| Crypto Acceleration | AES-256 + Hash |
| ADC | 2x 12-bit, 5 Msps |
| DAC | 2x 12-bit |
| DFSDM | Yes (digital filter for sigma-delta modulators) |
| SMPS | Internal step-down converter |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do STM32L496VGY6TR wlcsp-100 (4.62 x 4.14 mm)
Configuração de pinos para STM32L496VGY6TR (pacote wlcsp-100 (4.62 x 4.14 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32L496VGY6TR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32L496VGY6TR é adequado para 7 aplicaçãos: Wearable Fitness Tracker, Portable Medical Sensor, Industrial IoT Sensor Node, USB-C Powered Accessory, LCD-Based HMI Panel, Smart Home Sensor Hub, Digital Audio Interface.
Wearable Fitness Tracker
The STM32L496VGY6TR's 25 nA shutdown current and integrated SMPS step-down converter enable multi-week battery life in wrist-worn fitness trackers. The WLCSP-100 package delivers the smallest possible PCB footprint, fitting inside 25 x 25 mm wearable enclosures alongside a heart-rate sensor and BLE radio. The 1 MB flash comfortably hosts an RTOS, sensor fusion algorithms, and a BLE protocol stack, while 320 KB SRAM buffers accelerometer and PPG data without off-chip memory. The Cortex-M4F FPU accelerates step-counting and activity-classification DSP at low MHz to minimize active-mode current.
Recomendado
Portable Medical Sensor
For battery-powered medical devices such as pulse oximeters, glucose meters, and continuous monitoring patches, the STM32L496VGY6TR provides AES-256 hardware encryption to protect PHI data and USB OTG for tethered charging and data transfer. The 12-bit ADC at 5 Msps captures PPG and bio-impedance waveforms accurately, while the 2x DAC drives sensor excitation signals. Shutdown mode at 25 nA extends shelf life, and the integrated SMPS maintains high efficiency across the 1.71-3.6 V supply range typical for Li-ion coin cells.
Recomendado
Industrial IoT Sensor Node
The STM32L496VGY6TR suits battery-backed wireless sensor nodes measuring temperature, vibration, or tank level in industrial environments. Its 80 MHz Cortex-M4F core runs Modbus, MQTT-SN, or LoRaWAN stacks comfortably, while 1 MB flash stores configuration and historical data. The integrated DFSDM enables digital microphone or sigma-delta sensor interfaces for acoustic monitoring. Industrial temperature grade (up to 125C on some variants) and the SMPS regulator that maintains efficiency across wide load swings make this part robust for harsh factory environments.
Recomendado
USB-C Powered Accessory
USB OTG FS with Power Delivery makes the STM32L496VGY6TR ideal for USB-C accessories such as HID controllers, programmable keypads, and dongles. The 1 MB flash hosts USB device/host stacks and application firmware, while the 320 KB SRAM buffers USB transfers. The SMPS regulator efficiently steps down 5 V VBUS to core voltage without external inductors beyond a small power inductor. LCD interface capability adds value for accessories with status displays like programmable macro pads or USB-C hubs with embedded UI.
Recomendado
LCD-Based HMI Panel
The integrated LCD controller supports segment and parallel TFT panels up to 4.5 inch, ideal for home appliances, thermostats, and small industrial HMIs. The STM32L496VGY6TR's Cortex-M4F handles LVGL or emWin graphics libraries smoothly, while 320 KB SRAM accommodates frame buffers for small displays. The 1 MB flash stores multilingual fonts, graphics assets, and application logic. USB OTG enables firmware updates in the field, and shutdown mode at 25 nA keeps battery-backed thermostats running for years on a coin cell.
Recomendado
Smart Home Sensor Hub
The STM32L496VGY6TR works well as a smart home bridge aggregating Zigbee, BLE, or Wi-Fi data from multiple sensors. Its Cortex-M4F DSP handles on-device sensor fusion, anomaly detection, and voice-trigger wake-word recognition. Hardware AES-256 secures communication with cloud services, while 1 MB flash stores OTA update staging and credentials. USB OTG enables easy provisioning via USB-C, and the ultra-low-power Stop mode at 1.1 uA keeps standby power negligible when the hub is idle between sensor events.
Recomendado
Digital Audio Interface
The DFSDM (Digital Filter for Sigma-Delta Modulators) peripheral enables the STM32L496VGY6TR to interface directly with digital microphones and sigma-delta audio converters without external ADC ICs. Combined with the FPU-accelerated Cortex-M4F, it supports real-time audio beamforming, noise cancellation, and audio codec algorithms. The 320 KB SRAM buffers multi-channel audio streams, and USB OTG enables USB Audio Class device operation for USB headsets or USB microphones. The integrated SMPS maintains clean audio rails by minimizing switching noise coupling.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32L496VGY6TR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32L496VGT6 | STM32L4A6VGT6 | STM32L4R9VGI6 | STM32L496RGT6 | STM32L451VCT6 |
|---|---|---|---|---|---|---|
| Package | WLCSP-100 (4.62 x 4.14 mm) | LQFP-100 | LQFP-100 | UFBGA-100 | LQFP-64 | LQFP-100 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | Cortex-M4F @ 80 MHz | Cortex-M4F @ 80 MHz | Cortex-M4F @ 80 MHz | Cortex-M4F @ 80 MHz | Cortex-M4F @ 80 MHz | Cortex-M4F @ 80 MHz |
| Flash | 1 MB | 1 MB | 1 MB | 2 MB | 1 MB | 256 KB |
| SRAM | 320 KB | 320 KB | 320 KB | 640 KB | 320 KB | 160 KB |
| USB | USB OTG FS | USB OTG FS | USB OTG FS | USB OTG FS | USB OTG FS | USB FS |
| Crypto | AES-256 + Hash | AES-256 + Hash | AES-256 + Hash | AES-256 + Hash + PKA | AES-256 + Hash | AES-256 |
| Shutdown Current | 25 nA | 25 nA | 25 nA | 30 nA | 25 nA | 25 nA |
| Pin Count | 100 (WLCSP balls) | 100 (LQFP) | 100 (LQFP) | 100 (UFBGA) | 64 (LQFP) | 100 (LQFP) |
Principais diferenciais
- WLCSP-100 footprint enables smallest wearable PCB (vs STM32L496VGT6 (LQFP-100))
- Integrated SMPS regulator improves active power efficiency (vs STM32L451VCT6 (LDO-only regulator))
- 1 MB flash and 320 KB SRAM exceed most L4 competitors (vs STM32L451VCT6 (256 KB flash, 160 KB SRAM))
Notas de projeto
Estimated: The STM32L496VGY6TR in WLCSP-100 has a theta_JA of approximately 35-40 C/W. At maximum 80 MHz active mode with full peripheral activity, total power dissipation remains below 200 mW, yielding a junction temperature rise of 7-8 C above ambient - well within the 85 C operating limit. For designs in enclosed wearable enclosures with limited airflow, monitor junction temperature under realistic active-mode duty cycles.
WLCSP-100 requires advanced PCB fabrication with micro vias, fine-line/spacing (typically 3 mil/3 mil or smaller), and ENIG or OSP surface finish. Per IPC-7093 design guidelines, escape routing through the inner rows requires high-density interconnect (HDI) stackups. For hand-assembled prototypes or low-volume runs, consider the LQFP-100 variant STM32L496VGT6 to avoid assembly rework challenges.
The integrated SMPS step-down regulator requires a small external inductor (typically 4.7-10 uH, 0806 size). Per ST application note AN4621, place the inductor and bypass capacitors within 5 mm of the SMPS pins to minimize EMI. The SMPS efficiency is typically 85-90 percent at typical loads, vs 65-70 percent for the LDO-only mode, providing meaningful active-mode battery life improvement.
Do not exceed 3.6 V on any VDD pin. The BOOT0 pin must be properly biased for normal flash boot; floating BOOT0 can cause the MCU to enter system memory bootloader unintentionally. For USB OTG, the VBUS sense pin requires a 5V-tolerant configuration; consult reference manual RM0351 for the proper GPIO alternate-function mapping. The HSE crystal oscillator load capacitance must match the crystal specification, not just the IC's internal load cap.
Keep the analog supply VDDA and its decoupling capacitor (100 nF + 1 uF parallel) within 5 mm of the VDDA pin to minimize ADC noise. The reference voltage pin VREF+ requires its own 100 nF + 1 uF capacitor pair for ADC accuracy. Route high-speed USB D+/D- as a 90-ohm differential pair with ground reference on the same layer, per USB 2.0 specification. Place the RTC crystal (32.768K) close to the OSC32_IN/OSC32_OUT pins with grounded guard traces.
Informações de conformidade
RoHS and REACH compliant per ST product page. Not AEC-Q100 qualified - this is a commercial-grade part suitable for consumer, industrial, and medical (non-automotive) applications.
