STMicroelectronics

STM8L101F2U6ATR - 16MHz 4KB Low-Power MCU | STMicroelectronics

N.º da peça: STM8L101F2U6ATR ✓ Ativo
1.65 V to 3.6 V Vdss 20-pin UFQFPN Package 16 MHz Speed 4 KB Memory
MOQ: 1 |

STM8L101F2U6ATR Visão geral

The STMicroelectronics STM8L101F2U6ATR is an 8-bit ultra-low-power microcontroller with a 16 MHz clock, 4 KB of Flash memory, 2 KB of RAM, and 18 I/O ports, housed in a 20-pin UFQFPN package measuring 3 x 3 mm. It integrates multifunction timers, comparators, USART, SPI, and I2C interfaces for compact control and communication designs.

An ultra-low-power microcontroller is an embedded controller designed to balance processing capability with minimized energy consumption. The STM8L device belongs to the STM8 family and the STM8L EnergyLite line, combining an 8-bit architecture, low-power operating modes, and compact package options. This makes it suitable for battery-operated sensors, portable instruments, and embedded control nodes where active-mode performance and standby efficiency both matter.

Key characteristics include operation from 1.65 V to 3.6 V, 4 KB of Flash program memory, and 2 KB of RAM. The peripheral set supports USART for serial communication, SPI for higher-speed synchronous links, and I2C for connecting sensors and other low-speed peripherals. Two comparator channels and multifunction timers support direct sensing, timing, and basic control functions without requiring separate devices.

The device uses an 8-bit STM8 architecture operating up to 16 MHz. Its compact 20-pin UFQFPN package has 18 available I/O ports, allowing a small number of external connections despite the limited pin count. The manufacturer identifies this part as an ultra-low-power microcontroller with an operating supply range of 1.65 V to 3.6 V, making it appropriate for low-voltage systems where supply efficiency is central to the design.

Typical uses include low-power sensor nodes, battery-powered monitors, compact industrial controls, wearable accessories, communication modules, and small appliance controllers. The combination of 4 KB Flash, 2 KB RAM, three serial interfaces, timers, and comparators supports a standalone control platform when firmware requirements remain modest. The small 3 x 3 mm footprint also assists designers who need to minimize board area.

For PCB implementation, place decoupling capacitors close to the supply and ground pins, route oscillator and reset signals away from noisy switching nodes, and preserve the exposed-pad thermal and electrical requirements specified by the manufacturer. Firmware and peripheral selection must also account for the limited 4 KB program memory; larger buffers, protocol stacks, or complex control logic may require a higher-memory STM8L device.

This page combines lifecycle, package, memory, interface, and power specifications with practical application guidance, replacement analysis, and design considerations. It is intended to help engineers assess whether the STM8L101F2U6ATR provides enough Flash, RAM, I/O, and low-power capability for compact embedded systems before committing the 20-pin footprint to a PCB design.

Alternativas drop-in para STM8L101F2U6ATR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM8L101F2U6ATR (mesmo formato e footprint) — diferindo em Architecture, Flash Memory, RoHS Compliance.

STMicroelectronics
Architecture: Enhanced STM8 8-bit CPU core
Flash Memory: 4 KB (4K x 8)
RoHS Compliance: Compliant
Comparar com STM8L101F2U6ATR →

STM8L101F2U6TR

✅ Drop-In
STMicroelectronics
📦 20-pin UFQFPN (3 x 3 mm)
8-bit ultra-low-power microcontroller · STM8L EnergyLite · 16 MHz · 16 MIPS at 16 MHz · 4 KB (4K x 8) · 1.65 V to 3.6 V · 18 · 20-pin UFQFPN, 3 mm x 3 mm, 0.60 mm height

Consulte o preço

Ver ficha técnica →

STM8L101F2U3A

✅ Drop-In
📦 20-pin UFQFPN (3 x 3 mm)
Clock, memory, and supply ratings are identical at 16 MHz, 4 KB Flash, 2 KB RAM, and 1.65 V to 3.6 V; temperature-grade ordering code differs

📋 Alternativa de referência (fora do catálogo)

STM8L101F2U6ATR Classificações máximas e características elétricas

Architecture 8-bit
Frequência máxima de clock 16 MHz
Flash Memory 4 KB
RAM 2 KB
Supply Voltage Range 1.65 V to 3.6 V
I/O Port Count 18
Total Pin Count 20 pins
Package Type 20-pin UFQFPN
Package Dimensions 3 x 3 mm
Package Height 0.60 mm
Tipo de montagem Surface mount
Timer Support Multifunction timers
Comparator Support Integrated comparators
Serial Interface USART
Synchronous Serial Interface SPI
Two-Wire Serial Interface I2C
Product Family STM8L EnergyLite
Status do ciclo de vida Active
RoHS Compliance RoHS compliant

Guia de Configuração de Pinos do STM8L101F2U6ATR 0.60 mm

Configuração de pinos para STM8L101F2U6ATR (pacote 0.60 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 0.60 mm para STM8L101F2U6ATR

Nenhum dado detalhado de pinagem disponível para STM8L101F2U6ATR.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM8L101F2U6ATR é adequado para 6 aplicaçãos: Battery-Powered Sensor Nodes, Low-Power Industrial Monitoring, Portable Medical and Wellness Devices, Wearable and Smart-Home Accessories, Serial Communication Modules, Compact Appliance Controls.

🧩

Battery-Powered Sensor Nodes

The STM8L101F2U6ATR fits compact sensor nodes because its 1.65 V minimum supply voltage supports low-energy operation, while I2C and SPI provide flexible connections to sensing and conditioning components. The 16 MHz processor is sufficient for sensor configuration, filtering, threshold evaluation, and packet assembly, and the 4 KB Flash capacity keeps firmware focused. Two comparators can support direct threshold decisions, while multifunction timers can define measurement and sampling intervals. The principal design trade-off is memory: 2 KB RAM and 4 KB Flash require disciplined buffering and may not suit large wireless protocol stacks.

🏭

Low-Power Industrial Monitoring

The STM8L101F2U6ATR can serve as the supervisory controller in a low-power industrial monitor that watches digital sensors, indicators, and service inputs. Its 18 I/O ports provide a practical interface count in a 20-pin package, while the timers support periodic sampling and the comparators handle simple threshold events. Operation from 1.65 V to 3.6 V allows integration with low-energy industrial rails. Firmware should be checked against the 4 KB Flash limit, especially when adding event logging, configuration menus, or communications beyond the basic USART, SPI, or I2C interfaces.

💊

Portable Medical and Wellness Devices

The STM8L101F2U6ATR is appropriate for compact wellness or medical-adjacent peripherals that perform simple control functions within tight size and power constraints. Its low-voltage operation can support coin-cell or energy-harvesting architectures, while comparators and timers can supervise sensing windows. USART, SPI, and I2C permit connection to sensors, storage, or host electronics without requiring a large external interface controller. The limited 4 KB Flash and 2 KB RAM make code economy essential, and any regulated medical use requires application-specific validation rather than reliance on general MCU ratings.

📱

Wearable and Smart-Home Accessories

The STM8L101F2U6ATR can control a small wearable accessory or smart-home endpoint where a full application processor would be excessive. The 3 x 3 mm UFQFPN package preserves board area, the 16 MHz clock handles button, haptic, and sensor-management tasks, and the three serial interfaces support different peripheral mixes. Low-voltage operation is valuable in battery-operated products. Designers should avoid selecting it when local storage, graphical interaction, or a large standards-compliant radio stack would consume the available 4 KB Flash and 2 KB RAM.

🌐

Serial Communication Modules

The STM8L101F2U6ATR is well suited to a compact protocol bridge or configuration module built around USART, SPI, or I2C. Its multifunction timers can handle framing intervals or flow-control timing, while 18 I/O ports support status indicators and user inputs. The low 1.65 V operating limit provides flexibility for low-energy interface electronics. Firmware complexity is the key limitation: four kilobytes of Flash is suitable for focused protocol conversion but not for simultaneous support of many high-bandwidth stacks or extensive buffering.

🔧

Compact Appliance Controls

The STM8L101F2U6ATR can act as the main controller in a small appliance or utility device requiring modest logic, timing, and communications. Timers manage discrete actuators, comparators detect simple analog thresholds, and USART provides a service or programming path. Its 20-pin footprint and 18 available I/O ports reduce routing complexity in space-constrained products. Because the device provides only 4 KB Flash and 2 KB RAM, designers should reserve it for straightforward control tasks and consider a larger STM8L model when user interfaces, motor algorithms, or detailed diagnostics are required.

What are the key specifications of STM8L101F2U6ATR that engineers should know?
The STM8L101F2U6ATR is an 8-bit MCU rated up to 16 MHz, with 4 KB of Flash, 2 KB of RAM, 18 I/O ports, and a 1.65 V to 3.6 V supply range. According to the STMicroelectronics datasheet, the device also includes multifunction timers, comparators, USART, SPI, and I2C. These parameters define its suitability for compact low-power control systems, while the 4 KB Flash limit is the most important constraint for firmware sizing.
What is the operating voltage of STM8L101F2U6ATR?
The STM8L101F2U6ATR operates from 1.65 V to 3.6 V. According to the STMicroelectronics datasheet, this range supports low-voltage portable and energy-conscious systems. The design must maintain the supply within this limit from startup through normal operation, including load transients. Designers should also verify the voltage requirements of every attached sensor, transceiver, and external pull-up network.
How much memory does STM8L101F2U6ATR have?
The STM8L101F2U6ATR contains 4 KB of Flash program memory and 2 KB of RAM. The manufacturer identifies it as an 8-bit MCU in the STM8L EnergyLite family. These capacities are adequate for compact control loops, communication handling, and modest data buffers, but a firmware image with extensive libraries or large protocol tables may exceed the available 4 KB of program space.
What package and pin count does STM8L101F2U6ATR use?
The STM8L101F2U6ATR uses a 20-pin UFQFPN package measuring 3 x 3 mm and approximately 0.60 mm high. According to the STMicroelectronics product information, the package provides 18 I/O ports. The manufacturer datasheet should be used when assigning the individual pin functions and designing the exposed-pad land pattern, because the compact footprint requires careful thermal-via and soldering considerations.
Where can I download the STM8L101F2U6ATR datasheet PDF?
The STM8L101F2U6ATR datasheet PDF is available through the STMicroelectronics product documentation at https://www.st.com/resource/en/datasheet/stm8l101f2.pdf. The manufacturer datasheet is the preferred document for pin definitions, electrical limits, memory organization, clock settings, and recommended application circuits. It should also be checked whenever the PCB footprint, firmware configuration, or peripheral requirements change.
Where can I find the STM8L101F2U6ATR pinout?
The STM8L101F2U6ATR pinout is documented in the manufacturer datasheet, including the 20-pin UFQFPN land pattern and exposed-pad connection. Use that document when assigning power, ground, reset, oscillator, and I/O functions. Because this is a compact 3 x 3 mm package, the pin-description table and package drawing should be reviewed together before placing tracks, vias, and thermal pads.
Where can I buy STM8L101F2U6ATR online?
The STM8L101F2U6ATR can be requested through the Request a Quote form on this page. The form supports current quotation, stock, and lead-time requests for the exact 20-pin UFQFPN device rather than a related package or tape-and-reel code. Confirm the manufacturer suffix, temperature grade, and delivery format during quotation to prevent substitution with a mechanically similar but electrically different member of the STM8 family.
What is the price of STM8L101F2U6ATR?
Current pricing for the STM8L101F2U6ATR is returned through the Request a Quote form on this page. The form is tied to the exact MPN and allows purchasing teams to review quantity, currency, stock, and lead-time conditions before placing an order. Pricing should be confirmed for the required delivery format because packaging and order quantities can affect commercial terms.
What is the lead time for STM8L101F2U6ATR?
The current lead time for the STM8L101F2U6ATR should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, shipment destination, and the exact manufacturer ordering suffix. For production planning, request an allocation estimate and avoid treating a general STM8 availability statement as a commitment for this precise 20-pin UFQFPN configuration.
Is STM8L101F2U6ATR in stock?
Current stock for STM8L101F2U6ATR is handled through the Request a Quote form on this page. Submit the required quantity and delivery details to obtain an allocation response for the exact MPN. Because the device is listed as active, it remains a candidate for new designs, but a stock confirmation is still necessary when a build schedule cannot tolerate substitutions or schedule uncertainty.
What can replace STM8L101F2U6ATR?
STM8L101F2U6TR is a mechanically and electrically close alternative to the STM8L101F2U6ATR, with the same 16 MHz architecture, 4 KB Flash, 2 KB RAM, 20-pin UFQFPN footprint, and 1.65 V to 3.6 V supply range; its ordering code represents a different reel format. Before substituting it, verify the manufacturer ordering information, pin definitions, temperature grade, and reel orientation against the original BOM.
Is STM8L101F2U6ATR the same as STM8L101F2U6TR?
STM8L101F2U6ATR and STM8L101F2U6TR describe the same core 8-bit MCU configuration, including a 16 MHz maximum clock, 4 KB Flash, 2 KB RAM, and 20-pin UFQFPN package. Their ordering codes differ in delivery format, so they are not interchangeable without checking reel orientation and production labeling. Pin connectivity and electrical performance remain the principal PCB-level compatibility criteria.
STM8L101F2U6ATR vs STM8L101F2U3A - which is better for a low-power design?
Both devices use the same 20-pin UFQFPN format and provide a 16 MHz maximum clock, 4 KB Flash, 2 KB RAM, and a 1.65 V to 3.6 V supply range. The documented difference is the ordering temperature grade, so selection should be based on the required ambient and junction limits rather than performance. The STMicroelectronics datasheet and package markings should determine the approved choice for production.
When should I choose STM8L101F2U6ATR over a higher-memory STM8L device?
Choose the STM8L101F2U6ATR when the control firmware fits within 4 KB of Flash, the working state fits within 2 KB of RAM, and 18 I/O ports are sufficient. Its 20-pin 3 x 3 mm UFQFPN package can simplify compact board layouts. Select a higher-memory alternative when protocol libraries, display buffers, logging, or more complex control algorithms require additional program or data space.
Is STM8L101F2U6ATR suitable for battery-powered sensor applications?
The STM8L101F2U6ATR is suitable for many battery-powered sensor applications because it is an ultra-low-power 8-bit MCU with a 1.65 V minimum operating voltage. It also provides I2C and SPI for sensor connectivity, comparators for direct analog comparisons, and multifunction timers for measurement intervals. Actual battery life depends on the selected sleep mode, wake-up sources, sensor load, and periodic measurement duty cycle.
What is the best cross-brand equivalent for STM8L101F2U6ATR?
No cross-brand drop-in equivalent for the STM8L101F2U6ATR has been confirmed for the exact 20-pin UFQFPN footprint, 16 MHz clock, 4 KB Flash, 2 KB RAM, and peripheral arrangement. A mechanically similar microcontroller should not be treated as a drop-in replacement without verifying every pin, voltage limit, interrupt assignment, peripheral function, and startup behavior. Use the Request a Quote form when a sourcing review is required for the exact STMicroelectronics MPN.

Dados de referência de engenharia para STM8L101F2U6ATR — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the STM8L101F2U6ATR when an embedded product needs a 16 MHz 8-bit controller, no more than 4 KB of Flash, 2 KB of RAM, and a compact 20-pin UFQFPN footprint. Its low 1.65 V operating limit, 18 I/O ports, and integrated USART, SPI, I2C, timers, and comparators make it appropriate for battery-powered sensors, small monitors, communication modules, and compact appliance controllers. Choose STM8L101F2U6TR when the required production delivery format differs while retaining the same core electrical ratings. Choose STM8L101F2U3A only after confirming the appropriate temperature-grade ordering code. Select a higher-memory STM8L device when the application exceeds 4 KB of Flash or 2 KB of RAM, requires more I/O, or uses a large communications or control library.

Comparação com alternativas

Parâmetro Este produto STM8L101F2U6TR STM8L101F2U3A
Package 20-pin UFQFPN (3 x 3 mm) 20-pin UFQFPN (3 x 3 mm) 20-pin UFQFPN (3 x 3 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Architecture 8-bit 8-bit 8-bit
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz
Flash Memory 4 KB 4 KB 4 KB
RAM 2 KB 2 KB 2 KB
Supply Voltage Range 1.65 V to 3.6 V 1.65 V to 3.6 V 1.65 V to 3.6 V
I/O Port Count 18 18 18
Serial Interfaces USART, SPI, I2C USART, SPI, I2C USART, SPI, I2C

Principais diferenciais

  • Compact 20-pin implementation with 18 I/O ports (vs STM8L101F2U6TR)
  • Direct match for basic embedded-control requirements (vs STM8L101F2U3A)
  • Three integrated serial interfaces in a 20-pin package (vs STM8L101F2U6TR)

Notas de projeto

Validate the complete power budget at the 1.65 V lower operating limit, including startup, sensor loads, and communication activity. Place the required input and output decoupling capacitors close to their corresponding pins and use the values, tolerances, and ESR requirements listed in the manufacturer datasheet. If the system also uses 3.3 V peripherals, confirm that the STM8L101F2U6ATR and every attached device have compatible input thresholds.

The 20-pin UFQFPN occupies only 3 x 3 mm, so land-pattern accuracy and assembly process capability are important. Follow the manufacturer package drawing for pad dimensions, pitch, solder-mask clearance, and exposed-pad connection. Use thermal vias where the recommended layout calls for them, maintain adequate solder-mask dams around fine-pitch pads, and confirm the component orientation against pin 1 before authorizing assembly.

The 4 KB Flash and 2 KB RAM limits are the most frequent design risks. Measure the linked firmware size, reserve space for boot or application updates, and avoid allocating large buffers on the stack. Also verify that each assumed alternate-function pin can be assigned simultaneously; the 18 I/O positions include pins used by clocks, reset, programming, and power functions, so the effective application I/O count may be lower.

Route oscillator, reset, and sensitive sensor inputs away from switching power nodes and high-speed SPI traces. Use a continuous ground reference beneath and around the compact package, keep decoupling return paths short, and avoid routing interrupt or communication signals between noisy power-stage components. If SPI is used at higher clock rates, inspect edge timing and grounding with an oscilloscope because the 16 MHz system clock limits how much margin is available for slow signal edges.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The product listing identifies the STM8L101F2U6ATR as RoHS compliant. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

STM8L101F2U6ATR datasheet STM8L101F2U6ATR pinout STM8L101F2U6ATR specifications STM8L101F2U6ATR equivalent STM8L101F2U6ATR replacement STM8L101F2U6ATR cross reference STM8L101F2U6ATR vs STM8L101F2U6TR STM8L101F2U6ATR UFQFPN20 footprint STM8L101F2U6ATR 16MHz 4KB STM8L101F2U6ATR battery powered sensor STM8L101F2U6ATR price STM8L101F2U6ATR stock STMicroelectronics STM8L101F2U6ATR STM8L101F2U6ATR schematic STM8L101F2U6ATR application circuit

Componentes & termos relacionados

STMicroelectronics STM8L101F2U6ATR STM8L101F2U6TR STM8L101F2U3A STM8L STM8L EnergyLite 8-bit microcontroller embedded microcontroller ultra-low-power microcontroller semiconductor 16 MHz 4 KB Flash memory 2 KB RAM 1.65 V to 3.6 V UFQFPN-20 QFN family surface mount 3 x 3 mm package USART SPI I2C multifunction timer comparator battery-powered sensor node RoHS
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ