Texas Instruments

TAS5111ADAD - 70W Mono Class-D Amplifier | Texas Instruments

N.º da peça: TAS5111ADAD ✓ Ativo
32-pin HTSSOP with exposed pad Package
MOQ: 1 |

TAS5111ADAD Visão geral

The Texas Instruments TAS5111ADAD is a mono Class-D digital amplifier power stage rated for up to 70 W output, with a 32-pin HTSSOP package and exposed thermal pad. It is designed to drive a 4-ohm speaker with low distortion and high power efficiency. The device accepts a digital amplifier input and integrates the power-stage functionality required in compact audio systems.

A Class-D audio amplifier is a switching amplifier that uses pulse-width modulation to control current through the speaker. Compared with a linear Class-AB output stage, a Class-D power stage can convert more of its input power into acoustic output, reducing heat in compact consumer, automotive, and industrial audio products. The TAS5111A belongs to the digital amplifier power-stage hierarchy within audio amplifier ICs and power-management semiconductors.

Key characteristics include mono Class-D operation, output capability up to 70 W, and total harmonic distortion plus noise of 0.2% under the conditions described by the manufacturer. The 32-HTSSOP construction integrates the power stage in a surface-mount package, while the exposed pad provides the primary thermal connection to the PCB. These features suit applications where acoustic output power and compact implementation are more important than zero-order class operation.

The TAS5111A architecture is intended for use as the output stage of a digital audio system. Because it is a power-stage IC rather than a complete codec or signal processor, the upstream system must supply the required digital audio signal and the associated control and bus infrastructure. Designers should match the input interface, supply arrangement, speaker impedance, and filtering requirements to the reference design before releasing a production board.

Typical uses include powered speakers, soundbars, subwoofers, automotive audio systems, home-theater equipment, and compact consumer speakers. The mono architecture makes it particularly appropriate for a single loudspeaker or for a balanced arrangement in which two devices drive separate left and right channels. Its 70 W capability supports substantially more output than a conventional low-power analog amplifier while retaining a compact surface-mount footprint.

The exposed thermal pad is a critical design feature. A PCB with adequate copper area and thermal vias should connect the pad to a ground plane, while output inductors and input filtering must follow the manufacturer reference layout. Correct thermal design preserves output-current capability, limits junction temperature, and reduces the risk of thermal shutdown during sustained high-power playback.

This page organizes the key electrical, package, thermal, application, and sourcing information for TAS5111ADAD while clearly separating unknown characteristics. It also provides a package-aware selection guide, practical layout guidance, and a comparison framework focused on genuine same-footprint replacement decisions.

Alternativas drop-in para TAS5111ADAD — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com TAS5111ADAD (mesmo formato e footprint) — diferindo em Package, Product Type.

Texas Instruments
Package: 32-pin HTSSOP
Product Type: Digital amplifier power stage
Comparar com TAS5111ADAD →

TAS5111DAD

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 32-HTSSOP with exposed pad
Digital amplifier power stage · Texas Instruments · 1 channel (mono) · Class D · Bridge-tied load (BTL) · 70 W RMS into 4 ohms · Less than 1% · 32-pin HTSSOP

Consulte o preço

Ver ficha técnica →

TAS5111ADAD Classificações máximas e características elétricas

Product Type Mono digital amplifier power stage
Amplifier Class Class D
Channel Count 1 channel
Maximum Output Power 70 W
Listed Maximum Power 93 W
Distortion Plus Noise 0.2%
Supported Speaker Configuration Mono 4-ohm speaker
Encapsulamento 32-pin HTSSOP with exposed pad
Tipo de montagem Surface mount
Número de pinos 32 pins
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown

Guia de Configuração de Pinos do TAS5111ADAD 32-pin htssop with exposed pad

Configuração de pinos para TAS5111ADAD (pacote 32-pin htssop with exposed pad). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 32-pin htssop with exposed pad para TAS5111ADAD

Nenhum dado detalhado de pinagem disponível para TAS5111ADAD.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

TAS5111ADAD é adequado para 6 aplicaçãos: Powered Speaker, Subwoofer Amplifier, Soundbar Speaker Channel, Automotive Audio Power Stage, Home Theater Amplifier, Industrial Active Speaker.

🔊

Powered Speaker

The TAS5111ADAD fits a powered speaker requiring up to 70 W of mono Class-D output into a 4-ohm speaker. Placing the device in the speaker enclosure reduces external wiring while allowing the digital source and control electronics to remain remote. The 32-pin HTSSOP exposed pad should connect to a carefully designed thermal copper area with multiple vias. LC output filtering, speaker wiring, and power-supply capacity must follow the manufacturer reference design to preserve efficiency and limit switching-related interference.

🔊

Subwoofer Amplifier

The TAS5111ADAD is suitable for a compact subwoofer power stage because its mono Class-D architecture can deliver up to 70 W into the documented 4-ohm load. The digital power-stage approach permits efficient operation in space-constrained cabinets while its 0.2% distortion-plus-noise figure supports clean low-frequency reproduction. Designers must account for enclosure resonance, bass-signal processing, protection behavior, and the exposed-pad thermal path rather than treating the IC as a complete standalone subwoofer amplifier.

📺

Soundbar Speaker Channel

A soundbar can use the TAS5111ADAD as a dedicated mono channel driver when the architecture requires a higher-power speaker output than a codec or conventional Class-AB buffer can provide. The part's stated 70 W capability suits powered soundbar channels driven from a system digital-audio bus. Its exposed-pad HTSSOP package enables compact placement, but output inductors, bypass capacitors, speaker protection, and thermal vias require controlled layout to avoid instability, EMI problems, or excess junction temperature.

🚗

Automotive Audio Power Stage

The TAS5111ADAD can serve as a mono automotive-audio power stage where a 4-ohm speaker load and up to 70 W output match the system's requirements. Its integrated Class-D output stage can reduce the size of a multi-speaker amplifier compared with discrete linear solutions. Before automotive release, verify the exact operating-temperature grade, supply behavior, transient tolerance, EMI performance, and AEC-Q100 status directly in the manufacturer documentation because those qualifications are not established by the component listing alone.

🏠

Home Theater Amplifier

The TAS5111ADAD is appropriate for a home-theater powered speaker or compact multichannel amplifier requiring a high-power mono output stage. Its 32-pin HTSSOP format supports dense board layouts, while the integrated Class-D topology improves conversion efficiency compared with a linear output stage. A complete home-theater channel still requires digital audio routing, volume control, bass management, filtering, and protection. Thermal analysis should use actual enclosure conditions because sustained program material can heat the exposed pad substantially above laboratory conditions.

🏭

Industrial Active Speaker

The TAS5111ADAD can drive the speaker in an industrial active-speaker or public-address product where a robust 4-ohm load and high mono power are required. The device's 70 W Class-D output stage can support compact amplification electronics near the transducer, reducing analog signal distribution over long cables. Industrial products should add suitable input conditioning, speaker-wire protection, thermal monitoring, and EMC controls. The exposed-pad grounding and via arrangement must follow the reference layout to preserve output stability and reduce conducted emissions.

What is the TAS5111ADAD?
The TAS5111ADAD is a Texas Instruments mono Class-D digital amplifier power stage capable of driving a 4-ohm speaker at up to 70 W. It is packaged in a 32-pin HTSSOP with an exposed pad. According to the Texas Instruments datasheet, the device provides a total harmonic distortion plus noise level of 0.2% under the stated test conditions.
What are the key specifications of TAS5111ADAD that engineers should know?
The principal TAS5111ADAD specifications are mono Class-D operation, up to 70 W output into a 4-ohm speaker, 0.2% distortion plus noise, and a 32-pin HTSSOP package with an exposed pad. The Texas Instruments datasheet also identifies the TAS5111A as a digital amplifier power stage intended for high-performance audio systems using 4-ohm speaker loads.
Where can I download the TAS5111ADAD datasheet PDF?
The TAS5111ADAD datasheet PDF is available from the Texas Instruments document links associated with the component and from the manufacturer-hosted copy reproduced in the search results. Use the 32-pin HTSSOP pin description, thermal information, and application circuit when assigning PCB nets. The exact package drawing and exposed-pad connections must be taken from the manufacturer datasheet.
Where can I find the TAS5111ADAD pinout?
The TAS5111ADAD pinout is defined in the Texas Instruments manufacturer datasheet under the 32-pin HTSSOP pin configuration and package drawings sections. Assign the digital input, control, supply, ground, output-filter, and exposed-pad nets exactly as shown there rather than inferring positions from the generic HTSSOP library diagram. The exposed pad is the principal thermal and electrical connection.
How much power can TAS5111ADAD drive?
The TAS5111ADAD is described by Texas Instruments as a digital amplifier power stage capable of driving a 4-ohm speaker at up to 70 W. One distributor summary also lists 93 W, but the manufacturer description identifies 70 W as the principal capability. Confirm the exact supply voltage, channel configuration, cooling conditions, and distortion criterion in the datasheet before sizing a production design.
Is TAS5111ADAD suitable for a mono powered speaker?
Yes, the TAS5111ADAD is suitable for a mono powered speaker because it is a one-channel Class-D power stage designed to drive a 4-ohm load. Its stated capability reaches 70 W, making it appropriate for compact powered speakers, soundbars, subwoofers, and similar products. Thermal design, filtering, and the upstream digital audio interface remain essential to achieving rated performance.
What is the difference between TAS5111ADAD and TAS5111DAD?
TAS5111ADAD is the A-version TAS5111A device in a 32-HTSSOP package, while TAS5111DAD belongs to the earlier TAS5111 family listing. The available manufacturer-family information identifies both as digital amplifier power stages, but it does not establish every electrical revision difference. Treat TAS5111DAD as a candidate replacement only after comparing the complete pin, supply, control, and performance tables.
Can TPA3116D2DADR replace TAS5111ADAD?
The TPA3116D2DADR is not a confirmed pin-to-pin replacement for the TAS5111ADAD because it is a 50 W stereo Class-D amplifier while the TAS5111ADAD is a mono power stage with a different interface arrangement. Although both use 32-HTSSOP-style packages, package similarity alone does not establish compatibility. Use the manufacturer cross-reference and pin tables before considering any board change.
When should I choose TAS5111ADAD instead of a generic Class-D amplifier?
Choose TAS5111ADAD when a compact mono power stage must drive a 4-ohm speaker at up to 70 W and the design is being aligned with the Texas Instruments reference architecture. It is preferable to a generic amplifier when its documented digital interface, supply arrangement, filter implementation, and exposed-pad layout reduce design uncertainty. A generic alternative is reasonable only after equivalent electrical and thermal validation.
What can replace TAS5111ADAD?
The closest identified same-footprint candidate is the Texas Instruments TAS5111DAD, which is listed as another digital amplifier power stage in the 32-HTSSOP family. A definitive drop-in qualification requires exact pin assignments, supply limits, digital-interface timing, and output characteristics to match. The cross-reference search did not identify enough confirmed replacements to recommend unqualified alternatives.
Is TAS5111ADAD the same as TAS5112DFDRG4?
No direct equivalence should be assumed between TAS5111ADAD and TAS5112DFDRG4. Both relate to TI digital amplifier power stages, but the product families may differ in channel architecture, power rating, control interface, and package details. Verify the complete datasheet pin descriptions and electrical characteristics. A same-package appearance does not by itself make TAS5112DFDRG4 a drop-in replacement.
Where can I buy TAS5111ADAD online?
Use the Request a Quote form on this page to request TAS5111ADAD availability, current commercial terms, and lead time. The form allows the exact MPN and required quantity to be reviewed without relying on a stale marketplace listing. The manufacturer datasheet link on this page can also be used to confirm the required 32-pin HTSSOP variant before ordering.
What is the price of TAS5111ADAD?
The current commercial price of TAS5111ADAD is obtained through the Request a Quote form on this page because pricing and stock can change with quantity and market conditions. Enter the exact MPN TAS5111ADAD, the required order quantity, and the desired shipment destination. This ensures the quotation is tied to the correct 32-pin HTSSOP device rather than a related package variant.
Is TAS5111ADAD in stock and what is its lead time?
Current TAS5111ADAD stock and lead time should be confirmed through the Request a Quote form on this page. The manufacturer-facing inquiry should specify the required quantity, standard or tube packaging, and shipment destination. Because the quote workflow may allocate inventory dynamically, avoid treating a distributor landing page as a guaranteed stock reservation.
Does TAS5111ADAD require a heatsink?
The TAS5111ADAD requires an effective PCB thermal path because it is a 70 W-class power stage in a 32-pin HTSSOP with an exposed pad. The exact requirement depends on supply voltage, output level, speaker impedance, ambient temperature, copper area, and the duration of high-power operation. Use the exposed pad, thermal vias, copper pours, and manufacturer layout guidance rather than relying on a separate heatsink assumption.

Dados de referência de engenharia para TAS5111ADAD — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the TAS5111ADAD when the product requires a compact, high-power mono Class-D stage that can drive a 4-ohm speaker at up to 70 W and the design can follow the Texas Instruments reference architecture. It is particularly useful in powered speakers, soundbars, subwoofers, automotive audio, and active industrial speakers where efficiency and thermal integration are important. TAS5111DAD is the closest identified same-family candidate, but it must pass a complete pin, supply, control, and electrical review before substitution. TPA3116D2DADR is not a drop-in alternative because its stereo architecture and interface differ. For designs needing codec integration, analog input support, or a different power rating, evaluate the broader TI audio-amplifier portfolio rather than forcing this power stage into an incompatible product requirement.

Comparação com alternativas

Parâmetro Este produto TAS5111DAD
Package 32-HTSSOP with exposed pad 32-HTSSOP power-stage package; exact drawing must be verified
Brand Texas Instruments Texas Instruments
Product Family TAS5111A TAS5111
Amplifier Type Digital amplifier power stage Digital amplifier power stage
Amplifier Class Class D Class D
Channel Count 1 channel 1 channel
Speaker Load 4 ohm 4 ohm

Principais diferenciais

  • High-power mono output in a compact surface-mount package (vs TAS5111DAD)
  • Documented low distortion for a compact power stage (vs TAS5111DAD)
  • Integrated digital audio power-stage architecture (vs TPA3116D2DADR)

Notas de projeto

Treat the exposed pad as the device's primary thermal path. Use the manufacturer package drawing to connect the pad to a broad ground copper region and distribute multiple thermal vias near the pad. Validate the design at the intended 70 W operating level because continuous bass output, restricted enclosure airflow, and high ambient temperature can produce substantially greater heating than a short-duration test.

Place input bypass, supply-decoupling, and output-filter components according to the reference layout, keeping high-current switching loops compact. Route the 4-ohm speaker output away from sensitive input and control traces. The exposed-pad and via arrangement must comply with the manufacturer's land pattern because impedance, via placement, and copper-plane discontinuities can affect stability and electromagnetic performance.

Do not substitute TAS5112DFDRG4 or TPA3116D2DADR solely because they use related 32-pin power-stage packages. Those parts have different channel or interface configurations, and matching package dimensions do not guarantee matching pins. For TAS5111DAD, compare every power, ground, control, clock, data, and feedback connection against the manufacturer pin table before treating it as a board-for-board replacement.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No specific environmental or automotive compliance declarations were identified in the available manufacturer and distributor listings. Verify the current material declaration and qualification information with Texas Instruments before production release.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

TAS5111ADAD datasheet TAS5111ADAD pinout TAS5111ADAD datasheet pdf TAS5111ADAD 32 HTSSOP TAS5111ADAD 70W amplifier TAS5111ADAD Class D power stage TAS5111ADAD replacement TAS5111ADAD equivalent TAS5111ADAD vs TAS5111DAD TAS5111ADAD vs TPA3116D2DADR Texas Instruments TAS5111ADAD TAS5111ADAD price

Componentes & termos relacionados

Texas Instruments TAS5111ADAD TAS5111A TAS5111DAD TPA3116D2DADR TAS5112DFDRG4 Class-D amplifier digital amplifier power stage mono audio amplifier audio amplifier IC power-management semiconductor 32-pin HTSSOP HTSSOP package family surface-mount package exposed thermal pad 4-ohm speaker 70 W power stage distortion plus noise powered speaker soundbar subwoofer automotive audio surface-mount technology digital audio
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ