TAS5111ADAD - 70W Mono Class-D Amplifier | Texas Instruments
N.º de pieza: TAS5111ADAD ✓ ActivoTAS5111ADAD Descripción general
A Class-D audio amplifier is a switching amplifier that uses pulse-width modulation to control current through the speaker. Compared with a linear Class-AB output stage, a Class-D power stage can convert more of its input power into acoustic output, reducing heat in compact consumer, automotive, and industrial audio products. The TAS5111A belongs to the digital amplifier power-stage hierarchy within audio amplifier ICs and power-management semiconductors.
Key characteristics include mono Class-D operation, output capability up to 70 W, and total harmonic distortion plus noise of 0.2% under the conditions described by the manufacturer. The 32-HTSSOP construction integrates the power stage in a surface-mount package, while the exposed pad provides the primary thermal connection to the PCB. These features suit applications where acoustic output power and compact implementation are more important than zero-order class operation.
The TAS5111A architecture is intended for use as the output stage of a digital audio system. Because it is a power-stage IC rather than a complete codec or signal processor, the upstream system must supply the required digital audio signal and the associated control and bus infrastructure. Designers should match the input interface, supply arrangement, speaker impedance, and filtering requirements to the reference design before releasing a production board.
Typical uses include powered speakers, soundbars, subwoofers, automotive audio systems, home-theater equipment, and compact consumer speakers. The mono architecture makes it particularly appropriate for a single loudspeaker or for a balanced arrangement in which two devices drive separate left and right channels. Its 70 W capability supports substantially more output than a conventional low-power analog amplifier while retaining a compact surface-mount footprint.
The exposed thermal pad is a critical design feature. A PCB with adequate copper area and thermal vias should connect the pad to a ground plane, while output inductors and input filtering must follow the manufacturer reference layout. Correct thermal design preserves output-current capability, limits junction temperature, and reduces the risk of thermal shutdown during sustained high-power playback.
This page organizes the key electrical, package, thermal, application, and sourcing information for TAS5111ADAD while clearly separating unknown characteristics. It also provides a package-aware selection guide, practical layout guidance, and a comparison framework focused on genuine same-footprint replacement decisions.
Alternativas directas para TAS5111ADAD — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con TAS5111ADAD (mismo factor de forma y huella) — difiere en Package, Product Type.
TAS5111DAD
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →TAS5111ADAD Valores máximos y características eléctricas
| Product Type | Mono digital amplifier power stage |
| Amplifier Class | Class D |
| Channel Count | 1 channel |
| Maximum Output Power | 70 W |
| Listed Maximum Power | 93 W |
| Distortion Plus Noise | 0.2% |
| Supported Speaker Configuration | Mono 4-ohm speaker |
| Encapsulado | 32-pin HTSSOP with exposed pad |
| Tipo de montaje | Surface mount |
| Número de pines | 32 pins |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
Guía de configuración de pines de TAS5111ADAD 32-pin htssop with exposed pad
Configuración de pines para TAS5111ADAD (encapsulado 32-pin htssop with exposed pad). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para TAS5111ADAD.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TAS5111ADAD es adecuado para 6 aplicacións: Powered Speaker, Subwoofer Amplifier, Soundbar Speaker Channel, Automotive Audio Power Stage, Home Theater Amplifier, Industrial Active Speaker.
Powered Speaker
The TAS5111ADAD fits a powered speaker requiring up to 70 W of mono Class-D output into a 4-ohm speaker. Placing the device in the speaker enclosure reduces external wiring while allowing the digital source and control electronics to remain remote. The 32-pin HTSSOP exposed pad should connect to a carefully designed thermal copper area with multiple vias. LC output filtering, speaker wiring, and power-supply capacity must follow the manufacturer reference design to preserve efficiency and limit switching-related interference.
Subwoofer Amplifier
The TAS5111ADAD is suitable for a compact subwoofer power stage because its mono Class-D architecture can deliver up to 70 W into the documented 4-ohm load. The digital power-stage approach permits efficient operation in space-constrained cabinets while its 0.2% distortion-plus-noise figure supports clean low-frequency reproduction. Designers must account for enclosure resonance, bass-signal processing, protection behavior, and the exposed-pad thermal path rather than treating the IC as a complete standalone subwoofer amplifier.
Soundbar Speaker Channel
A soundbar can use the TAS5111ADAD as a dedicated mono channel driver when the architecture requires a higher-power speaker output than a codec or conventional Class-AB buffer can provide. The part's stated 70 W capability suits powered soundbar channels driven from a system digital-audio bus. Its exposed-pad HTSSOP package enables compact placement, but output inductors, bypass capacitors, speaker protection, and thermal vias require controlled layout to avoid instability, EMI problems, or excess junction temperature.
Automotive Audio Power Stage
The TAS5111ADAD can serve as a mono automotive-audio power stage where a 4-ohm speaker load and up to 70 W output match the system's requirements. Its integrated Class-D output stage can reduce the size of a multi-speaker amplifier compared with discrete linear solutions. Before automotive release, verify the exact operating-temperature grade, supply behavior, transient tolerance, EMI performance, and AEC-Q100 status directly in the manufacturer documentation because those qualifications are not established by the component listing alone.
Home Theater Amplifier
The TAS5111ADAD is appropriate for a home-theater powered speaker or compact multichannel amplifier requiring a high-power mono output stage. Its 32-pin HTSSOP format supports dense board layouts, while the integrated Class-D topology improves conversion efficiency compared with a linear output stage. A complete home-theater channel still requires digital audio routing, volume control, bass management, filtering, and protection. Thermal analysis should use actual enclosure conditions because sustained program material can heat the exposed pad substantially above laboratory conditions.
Industrial Active Speaker
The TAS5111ADAD can drive the speaker in an industrial active-speaker or public-address product where a robust 4-ohm load and high mono power are required. The device's 70 W Class-D output stage can support compact amplification electronics near the transducer, reducing analog signal distribution over long cables. Industrial products should add suitable input conditioning, speaker-wire protection, thermal monitoring, and EMC controls. The exposed-pad grounding and via arrangement must follow the reference layout to preserve output stability and reduce conducted emissions.
Datos de referencia de ingeniería para TAS5111ADAD — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TAS5111DAD |
|---|---|---|
| Package | 32-HTSSOP with exposed pad | 32-HTSSOP power-stage package; exact drawing must be verified |
| Brand | Texas Instruments | Texas Instruments |
| Product Family | TAS5111A | TAS5111 |
| Amplifier Type | Digital amplifier power stage | Digital amplifier power stage |
| Amplifier Class | Class D | Class D |
| Channel Count | 1 channel | 1 channel |
| Speaker Load | 4 ohm | 4 ohm |
Diferenciadores clave
- High-power mono output in a compact surface-mount package (frente a TAS5111DAD)
- Documented low distortion for a compact power stage (frente a TAS5111DAD)
- Integrated digital audio power-stage architecture (frente a TPA3116D2DADR)
Notas de diseño
Treat the exposed pad as the device's primary thermal path. Use the manufacturer package drawing to connect the pad to a broad ground copper region and distribute multiple thermal vias near the pad. Validate the design at the intended 70 W operating level because continuous bass output, restricted enclosure airflow, and high ambient temperature can produce substantially greater heating than a short-duration test.
Place input bypass, supply-decoupling, and output-filter components according to the reference layout, keeping high-current switching loops compact. Route the 4-ohm speaker output away from sensitive input and control traces. The exposed-pad and via arrangement must comply with the manufacturer's land pattern because impedance, via placement, and copper-plane discontinuities can affect stability and electromagnetic performance.
Do not substitute TAS5112DFDRG4 or TPA3116D2DADR solely because they use related 32-pin power-stage packages. Those parts have different channel or interface configurations, and matching package dimensions do not guarantee matching pins. For TAS5111DAD, compare every power, ground, control, clock, data, and feedback connection against the manufacturer pin table before treating it as a board-for-board replacement.
Información de cumplimiento
No specific environmental or automotive compliance declarations were identified in the available manufacturer and distributor listings. Verify the current material declaration and qualification information with Texas Instruments before production release.