Texas Instruments

THS8136PHP - Triple 10-Bit 180-MSPS Video DAC | Texas Instruments

N.º da peça: THS8136PHP ✓ Ativo
3.3 V Vdss 48-pin HTQFP (PHP), 7 mm x 7 mm Package
MOQ: 1 |

THS8136PHP Visão geral

The Texas Instruments THS8136PHP is a triple 10-bit, 180-MSPS graphics and video digital-to-analog converter in a 48-pin HTQFP package measuring 7 mm by 7 mm. It operates from a 3.3 V analog supply and a 1.8 V digital supply, integrating three parallel-input DAC channels with circuitry for bi-level sync and blanking-level generation. The converter is designed for video and graphics systems that require simultaneous red, green, and blue analog outputs.

A DAC is a data converter that translates digital color or graphics codes into proportional analog voltages. The THS8136 belongs to the video DAC category, a specialized form of digital-to-analog converter used to drive analog display and video-processing equipment. Its parallel interface, triple-channel architecture, and integrated sync and blanking support place it within high-speed video signal-chain components rather than general-purpose precision DACs.

The device provides three 10-bit DAC channels operating at sampling rates up to 180 MHz. Its 1.8 V digital supply supports modern digital graphics logic, while the 3.3 V analog supply provides the operating rail for the output converters. A common full-scale-adjustment resistor sets the output range of all three channels, and a 3.8-kilohm resistor is suitable for systems targeting approximately 700 mV full-scale output levels. The 0.015-microsecond settling time supports high-speed pixel and video timing requirements.

Internal circuitry generates bi-level synchronization and blanking levels for RGB and YPbPr color spaces. These functions reduce the amount of external glue logic needed when generating composite or component video signals. The parallel digital inputs accept sampled video data, while the three analog outputs provide independent red, green, and blue channels. This integration makes the THS8136 useful in graphics controllers, video splitters, frame buffers, digital display systems, and test equipment.

A typical implementation places the three DAC outputs on controlled impedance PCB traces and connects the digital input bus to the graphics or video source. Designers should terminate and route the high-speed digital interface carefully because edge-rate harmonics can radiate even though the maximum sampling rate is 180 MHz. Analog and digital return currents should be managed so switching activity does not disturb the output reference.

The principal design trade-off is integration versus operating flexibility. The THS8136PHP combines three converters and video-control functions in one package, reducing external circuitry, but its dedicated video feature set makes it less suitable than a general-purpose DAC when arbitrary analog waveforms, calibration, or multiple independent output ranges are required. Confirm package pin assignments and exposed-pad requirements in the manufacturer datasheet before layout release.

This product overview combines the manufacturer’s device description with package, interface, output-adjustment, and ordering details that help engineers assess the THS8136PHP before designing a video DAC signal chain. It also clarifies the distinctions among same-device ordering options and pin-compatible industrial-grade variants.

Alternativas drop-in para THS8136PHP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com THS8136PHP (mesmo formato e footprint) — diferindo em Maximum Sampling Rate.

Texas Instruments
Maximum Sampling Rate: 240 MSPS
Comparar com THS8136PHP →

THS8136IPHP

✅ Drop-In
📦 48-pin HTQFP (PHP), 7 mm x 7 mm
Same THS8136 converter and 48-pin HTQFP footprint; industrial-temperature grade replaces the 0 C to +70 C commercial PHP ordering option.

📋 Alternativa de referência (fora do catálogo)

THS8136PHPR

✅ Drop-In
📦 48-pin HTQFP (PHP), 7 mm x 7 mm
Same electrical device and 48-pin HTQFP footprint; PHPR changes the packaging format from tray to tape and reel, with no electrical parameter change stated.

📋 Alternativa de referência (fora do catálogo)

THS8136IPHPR

✅ Drop-In
📦 48-pin HTQFP (PHP), 7 mm x 7 mm
Same THS8136 converter and 48-pin HTQFP footprint; industrial-temperature device supplied in tape-and-reel format rather than the commercial tray format.

📋 Alternativa de referência (fora do catálogo)

THS8136PHP Classificações máximas e características elétricas

Converter Type Triple 10-bit video digital-to-analog converter
Number of DAC Channels 3 channels
Resolução 10 bits per channel
Maximum Sampling Rate 180 MSPS
Analog Supply Voltage 3.3 V
Digital Supply Voltage 1.8 V
Settling Time 0.015 us
Digital Input Interface Parallel
Output Architecture Current steering
Supported Color Spaces RGB and YPbPr
Synchronization Function Bi-level sync generation
Blanking Function Blanking-level generation
Full-Scale Adjustment Common resistor from FSADJ to AVSS
Recommended FSADJ Resistor 3.8 kilohm for approximately 700 mV output
Faixa de temperatura de operação 0 C to +70 C
Encapsulamento 48-pin HTQFP (PHP), 7 mm x 7 mm
Tipo de montagem Surface mount

Guia de Configuração de Pinos do THS8136PHP 48-pin htqfp (php), 7 mm x 7 mm

Configuração de pinos para THS8136PHP (pacote 48-pin htqfp (php), 7 mm x 7 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 48-pin htqfp (php), 7 mm x 7 mm para THS8136PHP

Nenhum dado detalhado de pinagem disponível para THS8136PHP.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

THS8136PHP é adequado para 6 aplicaçãos: RGB Graphics Card Video Output, YPbPr Component Video Generator, Video Splitter and Distribution, Digital Frame Buffer Video Output, Digital Display Controller, Video Signal Test Equipment.

📺

RGB Graphics Card Video Output

The THS8136PHP fits RGB graphics systems that must convert three parallel 10-bit digital color channels into simultaneous analog red, green, and blue voltages. Its three current-steering DAC channels operate at up to 180 MSPS, matching demanding pixel-clock environments, while the 1.8 V digital supply supports compatible graphics-logic interfaces. Integrated bi-level sync and blanking circuitry can reduce external signal-generation components for RGB systems. The design should route each analog output over a controlled-impedance trace, place the common FSADJ resistor near the device, and preserve continuous ground returns beneath the high-speed digital bus.

🎥

YPbPr Component Video Generator

The THS8136PHP is appropriate for YPbPr component-video generation because it combines three 10-bit DAC channels with circuitry for bi-level sync and blanking-level generation. Sampling performance is assured to 180 MSPS, allowing the converter to handle high-speed digital component-video data before producing three scaled analog outputs. A 3.8-kilohm FSADJ resistor is suitable for approximately 700 mV full-scale levels in many designs. Engineers should verify cable termination, monitor input impedance, and output scaling while keeping the analog outputs away from switching nodes and noisy digital return paths.

🌐

Video Splitter and Distribution

A video splitter or distribution board can use the THS8136PHP to regenerate three synchronized analog color outputs from one parallel digital video bus. The 10-bit-per-channel architecture provides consistent quantization across red, green, and blue, while the 180-MSPS capability supports high pixel rates. Because all three channels share the external full-scale adjustment, a single FSADJ resistor establishes their common output scale and simplifies matching. PCB implementation should minimize bus skew, provide solid decoupling near the analog and digital supply pins, and use short analog output routes to prevent loss of video bandwidth.

🖥️

Digital Frame Buffer Video Output

The THS8136PHP is suitable at the output stage of a digital frame buffer or graphics controller that stores raster images and supplies parallel RGB data. Its three integrated 10-bit DACs convert the stored red, green, and blue samples simultaneously at rates up to 180 MSPS, while 3.3 V analog and 1.8 V digital rails support a split supply architecture. The converter reduces the number of discrete output channels required in a compact video engine. Timing alignment, bus skew, output reference stability, and exposed-pad thermal management should be checked together to prevent pixel artifacts.

🖥️

Digital Display Controller

The THS8136PHP can provide the analog color interface for a digital display controller requiring three simultaneous 10-bit channels. Its parallel digital input works well with raster-processing logic, and converter performance is specified through 180 MSPS for high-resolution refresh timing. Integrated sync and blanking generation supports conventional RGB or YPbPr video signaling and can simplify synchronization with downstream display hardware. Layout should treat the digital bus as a high-speed interface, preserve reference-plane continuity, and isolate the analog outputs from clocks and switching regulator nodes.

🔧

Video Signal Test Equipment

The THS8136PHP is useful in video test equipment that must generate controlled RGB or YPbPr analog outputs from digital test patterns. Three independently addressed 10-bit channels support color-level calibration, while the 180-MSPS operating capability enables high-speed raster stimulus generation. The common FSADJ network makes it straightforward to establish a repeatable full-scale range, and the 3.8-kilohm resistor suits many approximately 700 mV designs. Test-equipment layouts should use stable references, low-noise supply routing, symmetrical output paths, and calibrated terminations to improve channel matching and measurement accuracy.

Resumo dos produtos recomendados

THS8136IPHP Industrial-temperature pin-compatible ordering option Usado em: RGB Graphics Card Video Output, YPbPr Component Video Generator, Video Splitter and Distribution, Digital Display Controller, Video Signal Test Equipment THS8136PHPR Tape-and-reel ordering option Usado em: RGB Graphics Card Video Output, Digital Frame Buffer Video Output THS8136IPHPR Industrial-temperature tape-and-reel version Usado em: YPbPr Component Video Generator, Digital Display Controller THS8136PHP Texas Instruments Usado em: Video Splitter and Distribution, Digital Frame Buffer Video Output, Video Signal Test Equipment
What is the Texas Instruments THS8136PHP?
The Texas Instruments THS8136PHP is a triple 10-bit digital-to-analog converter designed for graphics and video equipment. According to the manufacturer datasheet, it contains three parallel-input DAC channels, operates from a 3.3 V analog supply and 1.8 V digital supply, and guarantees converter performance at sampling rates up to 180 MSPS. It also generates bi-level sync and blanking levels for RGB and YPbPr systems.
What is the resolution and maximum sampling rate of THS8136PHP?
The THS8136PHP provides 10-bit resolution on each of its three DAC channels and supports sampling rates up to 180 MSPS. According to the manufacturer datasheet, the device is a current-steering video converter with a stated settling time of 0.015 microseconds. These specifications suit high-speed pixel clocks and video-generation paths requiring simultaneous red, green, and blue conversion.
What supply voltages does THS8136PHP require?
The THS8136PHP requires a 3.3 V analog supply and a 1.8 V digital supply. According to the manufacturer product description, the two rails support the high-speed converter architecture while separating sensitive analog circuitry from lower-voltage digital inputs. The 1.8 V digital rail can connect more directly to compatible graphics logic, but signal timing, input levels, and board-level return paths must still be checked against the pin descriptions.
Where can I download the THS8136PHP datasheet PDF?
The THS8136PHP datasheet can be obtained from the official Texas Instruments product-document link, which resolves to the manufacturer’s THS8136 data sheet. The document covers the triple 10-bit architecture, 180-MSPS operation, supply requirements, full-scale adjustment, sync and blanking functions, and package information. Use its pin-description table and recommended application circuit when assigning PCB tracks.
Where can I find the THS8136PHP pinout?
The THS8136PHP pin assignments are documented in the pin-description table of the manufacturer data sheet. The device uses a 48-pin HTQFP package, and its exposed-pad requirements must also be followed during layout. Use the package drawing and land-pattern guidance in that document to connect supply, ground, digital inputs, analog outputs, synchronization controls, and the FSADJ resistor correctly.
How is the THS8136PHP output range adjusted?
The THS8136PHP uses a common full-scale-adjustment resistor connected between FSADJ and AVSS to establish the full-scale output current of all three DACs. According to manufacturer application information, a 3.8-kilohm resistor is suitable for most applications requiring approximately 700 mV output levels. Account for downstream monitor impedance, termination, and cable loading when choosing the final resistor.
What can replace the THS8136PHP on an existing PCB?
The closest documented replacement is the Texas Instruments THS8136IPHP, which retains the THS8136 device family and 48-pin HTQFP footprint but is identified as the industrial-temperature ordering option. The THS8136PHPR has the same device core but changes the shipping format to tape and reel. Confirm exposed-pad layout, temperature grade, pin functions, and acquisition status before approving either substitution.
Is THS8136IPHP a drop-in replacement for THS8136PHP?
The Texas Instruments THS8136IPHP is a pin-compatible industrial-grade option for the THS8136PHP because it uses the same 48-pin HTQFP device family and retains the same principal converter functionality. The meaningful difference is operating grade: the commercial PHP ordering option is specified for 0 C to +70 C, while the IPHP option is identified as industrial grade. Verify every pin, exposed-pad connection, and supply requirement against the manufacturer documentation.
What is the difference between THS8136PHP and THS8136PHPR?
THS8136PHP and THS8136PHPR identify the same Texas Instruments THS8136 converter in different order formats: PHP is associated with tray packaging, while PHPR is associated with reel packaging. The electrical device, 48-pin HTQFP footprint, triple 10-bit conversion, 180-MSPS operation, and signal functions remain the basis of interchangeability. Confirm the packing method required by the assembly process rather than changing the PCB footprint.
When should I choose THS8136PHP instead of a general-purpose DAC?
Choose the THS8136PHP when the design needs three simultaneous 10-bit video outputs and integrated bi-level sync or blanking generation at up to 180 MSPS. Its dedicated RGB and YPbPr support can reduce external circuitry in graphics and video paths. Select a general-purpose DAC instead when the application requires arbitrary waveforms, programmable calibration, multiple independent ranges, or non-video output architectures.
Is THS8136PHP suitable for RGB and YPbPr video generation?
The THS8136PHP is specifically suited to RGB and YPbPr video generation because its three 10-bit DAC channels produce simultaneous analog color outputs and its internal circuitry supports bi-level sync and blanking-level generation. According to the manufacturer data sheet, converter performance is assured through 180 MSPS. The implementation still requires correct output termination, controlled-impedance routing, suitable full-scale adjustment, and separation of analog and digital return currents.
Where can I buy THS8136PHP and what is its lead time?
Use the “Request a Quote” form on this page to request THS8136PHP availability, current unit pricing, minimum order quantity, and production lead time. The form allows the procurement team to confirm the exact package, quantity, and delivery requirements. Because this product is a catalog semiconductor with a manufacturer data sheet, a quote request is the appropriate route for current commercial terms and schedule.
What is the price of THS8136PHP?
Use the “Request a Quote” form on this page for the current THS8136PHP unit price and quantity breaks. The structured listing on this page contains pricing metadata for comparison, but current commercial terms can change with quantity, packaging, market conditions, and date. Request a quote for the exact THS8136PHP ordering code and required quantity to obtain an actionable purchasing response.
Is THS8136PHP in stock and how quickly can it ship?
Current THS8136PHP inventory and shipment timing should be confirmed through the “Request a Quote” form on this page. The form captures the exact quantity, package format, and destination needed for an availability response. For production planning, also obtain a manufacturer lifecycle statement and lead-time commitment rather than treating a general catalog listing as a stock guarantee.
What are the key specifications of THS8136PHP that engineers should know?
The key THS8136PHP specifications are triple 10-bit conversion, a maximum sampling rate of 180 MSPS, a 3.3 V analog supply, a 1.8 V digital supply, a parallel input interface, and a 48-pin 7 mm by 7 mm HTQFP package. According to the manufacturer description, the device also includes current-steering outputs, bi-level sync generation, and blanking-level generation for RGB and YPbPr color spaces.
What layout practices are important for the THS8136PHP?
Route the parallel digital bus with short, continuous traces and provide a continuous return path beneath the interface to limit high-frequency edge-current noise. Place the FSADJ resistor close to its specified pin and route analog outputs away from digital switching activity. Keep supply and ground planes intact under the device, follow the exposed-pad land pattern in the manufacturer documentation, and use controlled-impedance routing for video outputs when their network topology requires it.

Dados de referência de engenharia para THS8136PHP — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose THS8136PHP when the board requires three simultaneous 10-bit analog video outputs, operation through 180 MSPS, and integrated sync or blanking generation in a 48-pin HTQFP footprint. Select THS8136IPHP when the commercial 0 C to +70 C range is insufficient but the same electrical device and tray-based assembly flow are desired. Choose THS8136PHPR for the same commercial-grade device supplied in tape-and-reel format, or THS8136IPHPR when both industrial temperature and reel packaging are required. These options preserve the converter architecture and package rather than introducing a functional or cross-package substitution. A general-purpose multi-channel DAC may be preferable when arbitrary waveforms, programmable calibration, or independent output ranges are needed, because the THS8136 is optimized specifically for graphics and video signals.

Comparação com alternativas

Parâmetro Este produto THS8136IPHP THS8136PHPR THS8136IPHPR
Package 48-pin HTQFP (PHP), 7 mm x 7 mm 48-pin HTQFP (PHP), 7 mm x 7 mm 48-pin HTQFP (PHP), 7 mm x 7 mm 48-pin HTQFP (PHP), 7 mm x 7 mm
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Converter Type Triple video DAC Triple video DAC Triple video DAC Triple video DAC
Resolution 10 bits per channel 10 bits per channel 10 bits per channel 10 bits per channel
Maximum Sampling Rate 180 MSPS 180 MSPS 180 MSPS 180 MSPS
Analog Supply 3.3 V 3.3 V 3.3 V 3.3 V
Digital Supply 1.8 V 1.8 V 1.8 V 1.8 V
Settling Time 0.015 us 0.015 us 0.015 us 0.015 us
Operating Temperature Range 0 C to +70 C Industrial-temperature grade 0 C to +70 C Industrial-temperature grade
Shipping Format Tray Tray Tape and reel Tape and reel

Principais diferenciais

  • Integrated three-channel video conversion (vs General-purpose single-channel DAC)
  • Video-specific synchronization support (vs General-purpose DAC without integrated sync generation)
  • Split analog and digital supply architecture (vs Single-supply general-purpose DAC)

Notas de projeto

Treat the 10-bit parallel input bus as a high-speed interface even though the maximum pixel rate is 180 MSPS. Keep traces short, match the source-to-destination topology, and maintain a continuous reference plane beneath the bus. Place bypass capacitors close to the digital and analog supply pins, and avoid routing video outputs beneath switching nodes or digital clock nets.

Place the FSADJ resistor close to the THS8136PHP and follow the manufacturer’s connection and grounding instructions. A 3.8-kilohm resistor is suitable for many approximately 700 mV output designs, but the final value depends on the required full-scale range and downstream load. Verify the analog return path and keep the adjustment network away from noisy switching currents.

Do not confuse an ordering-format change with an electrical change. THS8136PHP, THS8136PHPR, THS8136IPHP, and THS8136IPHPR retain the same 48-pin HTQFP family, but temperature grade and shipping format differ. Confirm the exact suffix required by the BOM and assembly process, and verify every pin and exposed-pad connection against the manufacturer documentation before substitution.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The device is a commercial-temperature video DAC and is not identified as an AEC-Q100 automotive-qualified variant. Specific environmental and substance-compliance declarations should be confirmed with the manufacturer before release.

Buscas relacionadas

THS8136PHP datasheet THS8136PHP datasheet pdf THS8136PHP pinout THS8136PHP specifications Texas Instruments THS8136PHP THS8136PHP replacement THS8136PHP equivalent THS8136PHP vs THS8136IPHP THS8136PHP HTQFP-48 THS8136PHP video DAC application THS8136PHP price THS8136PHP stock THS8136 180 MSPS DAC THS8136 PHP footprint THS8136 RGB YPbPr DAC

Componentes & termos relacionados

Texas Instruments THS8136 THS8136PHP THS8136IPHP THS8136PHPR THS8136IPHPR digital-to-analog converter video DAC graphics DAC parallel interface current steering 10-bit resolution 180 MSPS RGB YPbPr bi-level synchronization blanking-level generation FSADJ 3.3 V analog supply 1.8 V digital supply 48-pin HTQFP TQFP package family surface-mount package controlled-impedance routing semiconductor
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ