NXP Semiconductors

TJA1027TK/20 - 20 kBd LIN Transceiver | NXP Semiconductors

N.º da peça: TJA1027TK/20 ✓ Ativo
LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A Rds(on) 8-HVSON (3 x 3 mm) Package
MOQ: 1 |

TJA1027TK/20 Visão geral

The NXP Semiconductors TJA1027TK/20 is a LIN 2.x physical-layer transceiver designed for automotive sub-networks operating at baud rates up to 20 kBd. The device is supplied in an 8-HVSON package with a 3 x 3 mm footprint. It is intended to interface a LIN master or slave protocol controller with the physical LIN bus, providing the communication link between the controller and vehicle sub-network.

A LIN transceiver is a physical-layer interface IC that converts logic-level controller signals into the voltage-based signaling used by a LIN bus, while receiving and conditioning bus signals for the protocol controller. The TJA1027 family is associated with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 for 12 V vehicle systems. These standards define the electrical behavior, timing, fault handling, and interoperability expectations of LIN vehicle networks.

The TJA1027TK/20 is specifically identified as pin-compatible with the TJA1020 and TJA1021. The cross-reference information also identifies compatibility with the TJA1022, TJA1029, and MC33662 families. This makes the device relevant to designs where an existing LIN transceiver footprint and software architecture must be retained while introducing a LIN 2.x-compatible interface. The 20 kBd operating limit is appropriate for conventional in-vehicle subnetworks rather than high-speed communication links.

The 8-HVSON package supports compact board layouts in automotive electronic control units, body modules, door-control units, and other distributed vehicle systems. The package dimensions, exposed thermal pad, and pin arrangement should be matched to the manufacturer land-pattern and thermal recommendations. The LIN bus wiring also requires correct termination, common-reference handling, and protection appropriate to the vehicle electrical environment.

For practical implementation, follow the pin-description table, recommended external components, bus-loading limits, and application schematic in the NXP TJA1027 datasheet. Pay particular attention to the distinction between the logic-side supply, ground connections, transceiver enable behavior, and LIN bus connection when assigning PCB tracks. Validate the assembled design with the applicable ISO 17987, SAE J2602, and LIN conformance requirements.

This page combines manufacturer protocol and package information with verified sourcing data, engineering selection guidance, drop-in replacement context, and practical PCB and integration considerations for engineers evaluating the TJA1027TK/20 in LIN-based automotive systems.

Alternativas drop-in para TJA1027TK/20 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com TJA1027TK/20 (mesmo formato e footprint) — diferindo em Package, Product Type, Maximum Baud Rate, Package Type, Pin Compatibility.

NXP Semiconductors
Product Type: LIN Bus Physical-Layer Transceiver
Package Type: SOIC-8
NXP Semiconductors
Package: 8-pin SO package
Product Type: LIN bus transceiver
Package Type: SOIC-8 surface-mount package
NXP Semiconductors
Package: 8-SO (SOIC-8) SMD
Product Type: LIN Transceiver (single-wire bus PHY)
Maximum Baud Rate: 20 kBd (/20 variant)
NXP Semiconductors
Package: HVSON14 (3 x 4.5 mm) with exposed pad
Maximum Baud Rate: 20 kBd
Pin Compatibility: Pin compatible with TJA1020, TJA1021, TJA1027, TJA1029 (SO14 / HVSON14 footprint)
NXP Semiconductors
Package: 8-pin SOIC
Pin Compatibility: TJA1020, TJA1021, TJA1022, TJA1027

TJA1020T/N1

✅ Drop-In
NXP Semiconductors
📦 8-HVSON (3 x 3 mm)
LIN bus transceiver · LINbus serial interface · Half LINbus transceiver · NXP Semiconductors · 8-pin SO package · SOIC-8 surface-mount package · 8 pins · End of Life

Consulte o preço

Ver ficha técnica →

TJA1021T/20/C

✅ Drop-In
NXP Semiconductors
📦 8-HVSON (3 x 3 mm)
LIN Transceiver (single-wire bus PHY) · LIN 2.0 / 2.1 / 2.2 / 2.2A / SAE J2602 / ISO 17987-4:2016 · 20 kBd (/20 variant) · 1 kBd · 3.0 V to 5.5 V (typical 5 V) · 5 V to 27 V (extended -27 V to +40 V with load dump) · 1 (half-duplex LIN bus + TXD/RXD logic) · 8-SO (SOIC-8) SMD

Consulte o preço

Ver ficha técnica →

TJA1022TK

✅ Drop-In
NXP Semiconductors
📦 8-HVSON (3 x 3 mm)
Dual LIN 2.2A / SAE J2602 transceiver · 2 (dual LIN) · LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 · 20 kBd · HVSON14 (3 x 4.5 mm) with exposed pad · Surface Mount

Consulte o preço

Ver ficha técnica →

TJA1029T/2Z

✅ Drop-In
NXP Semiconductors
📦 8-HVSON (3 x 3 mm)
LIN physical-layer transceiver · Up to 20 kBd · LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A · SAE J2602 · LIN leader/follower physical-bus interface · Half-duplex LIN transceiver · TXD dominant timeout

Consulte o preço

Ver ficha técnica →

MC33662JEF

✅ Drop-In
NXP Semiconductors
📦 8-HVSON (3 x 3 mm)
LIN Bus Physical-Layer Transceiver · 1 transmitter and 1 receiver · LINbus · 13.5 V · -40 °C · 125 °C · 8 pins · SOIC-8

Consulte o preço

Ver ficha técnica →

TJA1027TK/20 Especificações

Product Type LIN physical-layer transceiver
LIN Bus Maximum Baud Rate 20 kBd
Supported LIN Standards LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A
Automotive Standard SAE J2602
International Standard ISO 17987-4:2016 (12 V)
Bus Compatibility Pin-compatible with TJA1020 and TJA1021
Additional Pin-Compatible Families TJA1022, TJA1029, and MC33662
Encapsulamento 8-HVSON (3 x 3 mm)
Number of Terminals 8
Tipo de montagem Surface mount
Application In-vehicle sub-networks
Transceiver Configuration Half LIN bus

Guia de Configuração de Pinos do TJA1027TK/20 8-hvson (3 x 3 mm)

Configuração de pinos para TJA1027TK/20 (pacote 8-hvson (3 x 3 mm)). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 8-hvson (3 x 3 mm) para TJA1027TK/20

Nenhum dado detalhado de pinagem disponível para TJA1027TK/20.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

TJA1027TK/20 é adequado para 6 aplicaçãos: Automotive Body Control Module, Door Control Unit, Automotive Lighting Subnetwork, Vehicle Comfort System, Automotive Sensor Gateway, In-Vehicle Subnetwork Interface.

🚗

Automotive Body Control Module

The TJA1027TK/20 is suitable for connecting a body-control module to a conventional LIN subnetwork. Its 20 kBd operating rate and support for LIN 2.0, 2.1, 2.2, 2.2A, SAE J2602, and ISO 17987-4:2016 for 12 V systems match the communication requirements of many distributed vehicle functions. Place the transceiver between the vehicle's LIN protocol controller and the bus wiring, then use the manufacturer application circuit for the external bus and protection components. This architecture lets the controller handle protocol timing while the transceiver provides the physical interface. The compact 8-HVSON, 3 x 3 mm package supports dense control-unit layouts, although the exposed-pad land pattern and thermal requirements must be followed exactly.

🚗

Door Control Unit

A door-control unit can use the TJA1027TK/20 as the physical interface for LIN-connected switches, actuators, sensors, and related subnodes. The device's support for LIN 2.x and SAE J2602 is appropriate for a 12 V vehicle network operating at up to 20 kBd. Keeping the transceiver close to the controller allows the logic-side signals to remain short, while the LIN route is shaped according to the manufacturer's bus recommendations. Verify the transceiver's exact order-code ratings against the vehicle's supply transients, temperature range, and fault-recovery requirements. The 8-HVSON footprint also helps reduce board area in compact electronic control units where connector placement and thermal density are important design constraints.

💡

Automotive Lighting Subnetwork

The TJA1027TK/20 can serve as the bus interface for a lighting subnetwork containing distributed lamps, switches, or intelligent lighting controllers. LIN's single-wire bus architecture is well suited to these low-bandwidth vehicle functions, and the TJA1027TK/20 supports the specified LIN 2.x standards at up to 20 kBd. Use the NXP application schematic to implement the bus connection and follow its recommendations for termination, protection, routing, and grounding. Because vehicle lighting systems can experience supply transients and wiring faults, verify the exact device ratings and protection strategy against the platform specification. The small 8-HVSON package helps conserve PCB area in gateway and lighting-control modules without changing the standard LIN controller architecture.

🏭

Vehicle Comfort System

The TJA1027TK/20 is appropriate for comfort-system subnetworks that connect limited-data nodes such as seat, climate, window, and sensor modules. Its 20 kBd maximum rate is sufficient for the control traffic typically assigned to LIN subnets, while LIN 2.x and SAE J2602 compatibility support standardized automotive behavior. Install the device between the local communication controller and the physical bus, using short logic-side connections and the manufacturer-recommended external network. A common reference between the module and bus is essential for reliable signaling, so follow the grounding and decoupling guidance in the datasheet. The compact 8-HVSON package allows designers to retain the transceiver near the controller when PCB area is constrained.

🧩

Automotive Sensor Gateway

The TJA1027TK/20 can connect a low-speed sensor gateway to a LIN subnetwork. LIN is commonly used for distributed automotive sensors that exchange modest amounts of diagnostic and control data, and the transceiver's 20 kBd capability is aligned with that role. The protocol controller remains responsible for frame handling, while the TJA1027TK/20 supplies the physical bus interface. Route the LIN connection in accordance with the manufacturer recommendation, account for the bus capacitance and termination arrangement, and provide the specified supply and common-reference implementation. The 3 x 3 mm 8-HVSON package is useful in compact gateways, but engineers should use the exact package drawing to maintain assembly yield and the correct exposed-pad connection.

🌐

In-Vehicle Subnetwork Interface

The TJA1027TK/20 is designed for the physical interface layer of in-vehicle LIN subnetworks. It supports LIN 2.0, 2.1, 2.2, and 2.2A, together with SAE J2602 and ISO 17987-4:2016 for 12 V systems, making it appropriate for qualified automotive communication designs operating at up to 20 kBd. A successful implementation depends on matching the logic-side controller interface, implementing the prescribed LIN network termination and protection, and validating timing and fault behavior over the vehicle's electrical environment. Because the device is offered in a surface-mount HVSON format, PCB assembly and rework processes should be capable of handling the exposed-pad construction. Confirm the exact order code and qualification before introducing it into a new platform.

Resumo dos produtos recomendados

TJA1020 Pin-compatible LIN transceiver family alternative Usado em: Automotive Body Control Module, Automotive Lighting Subnetwork, Automotive Sensor Gateway TJA1021 Pin-compatible LIN transceiver family alternative Usado em: Automotive Body Control Module, Vehicle Comfort System, In-Vehicle Subnetwork Interface TJA1022 Pin-compatible LIN transceiver family member Usado em: Door Control Unit, Vehicle Comfort System TJA1029 Pin-compatible LIN transceiver family member Usado em: Door Control Unit, Automotive Sensor Gateway MC33662 Compatible NXP LIN transceiver family Usado em: Automotive Lighting Subnetwork, In-Vehicle Subnetwork Interface
What is the TJA1027TK/20 used for?
The TJA1027TK/20 is an NXP physical-layer transceiver used to connect a LIN master or slave protocol controller to an automotive LIN bus. According to the NXP product information, it is primarily intended for in-vehicle subnetworks operating at up to 20 kBd. The device provides the interface between the controller and the physical bus, making it suitable for body, comfort, lighting, door, and other distributed vehicle-control networks.
Which LIN standards does the TJA1027TK/20 support?
The TJA1027TK/20 supports LIN 2.0, LIN 2.1, LIN 2.2, and LIN 2.2A, as well as SAE J2602. The NXP TJA1027 datasheet also identifies ISO 17987-4:2016 for 12 V systems. These specifications make the device appropriate for conventional 12 V automotive LIN subnetworks where interoperability and fault behavior must follow the established LIN requirements.
What is the maximum baud rate of the TJA1027TK/20?
The TJA1027TK/20 supports LIN communication at rates up to 20 kBd. This is the operating range stated by NXP for in-vehicle subnetworks. It should not be interpreted as a high-speed differential transceiver; the device is designed for LIN bus signaling, where baud rate, rise time, bus capacitance, and termination must be evaluated together.
Where can I download the TJA1027TK/20 datasheet?
The official TJA1027 datasheet is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1027.pdf. The manufacturer datasheet is the preferred source for the complete pin-description table, electrical characteristics, recommended application circuit, package dimensions, thermal information, and LIN bus timing requirements. Use the TJA1027TK/20 order-code information to confirm the exact package and temperature variant before releasing a production BOM.
What is the TJA1027TK/20 pinout?
The TJA1027TK/20 uses an 8-HVSON package, but the complete numbered pin-name assignment is not reproduced here because it is not included in the manufacturer product-page snippet. Use the NXP TJA1027 datasheet pin-description table to assign the logic-side supply, ground, controller interface, LIN connection, and any exposed-pad connection. The package drawing and land pattern should be checked against the specific TJA1027TK/20 variant.
Can the TJA1020 replace the TJA1027TK/20?
Yes, the NXP product information explicitly states that the TJA1027 is pin-compatible with the TJA1020. The compatibility statement makes the TJA1020 a relevant same-family drop-in candidate when its electrical ratings, package drawing, temperature grade, and LIN behavior match the original design. Confirm the exact package variant and compare the complete datasheet specifications before production substitution.
Can the TJA1021 replace the TJA1027TK/20?
Yes, the TJA1021 is explicitly identified by NXP as pin-compatible with the TJA1027. It is therefore a candidate for an existing LIN transceiver design that uses the TJA1027 footprint and controller interface. Verify supply voltage, operating temperature, bus protection, standby or enable behavior, and the exact HVSON package variant against the TJA1027TK/20 datasheet before approving the replacement.
What is the best replacement for the TJA1027TK/20?
The best replacement depends on the footprint and electrical requirements rather than the family name alone. NXP identifies the TJA1020 and TJA1021 as pin-compatible with the TJA1027, while the available cross-reference information also names the TJA1022, TJA1029, and MC33662. For a production replacement, match the package dimensions, exposed-pad connection, logic-side pinout, LIN bus ratings, temperature range, and automotive qualification of the exact TJA1027TK/20 order code.
When should I choose the TJA1027TK/20 over an older LIN transceiver?
Choose the TJA1027TK/20 when the design needs a LIN 2.x-compatible physical-layer device, a documented maximum rate of 20 kBd, and compatibility with LIN 2.0, 2.1, 2.2, 2.2A, SAE J2602, and ISO 17987-4:2016 for 12 V systems. Retain an older family member only when the existing design has been fully qualified against it and changing the device would create unnecessary validation work.
Is the TJA1027TK/20 suitable for automotive body-control networks?
Yes, the TJA1027TK/20 is intended for in-vehicle subnetworks, including typical distributed vehicle functions such as body and door control. Its LIN 2.x and SAE J2602 compatibility supports use in 12 V automotive networks. The final suitability still depends on the device's exact electrical limits, automotive qualification, operating-temperature grade, and protection requirements in the vehicle platform.
How do I design the LIN bus connection around the TJA1027TK/20?
Use the NXP TJA1027 application schematic as the basis for the bus connection, including the recommended termination and protection arrangement. Keep the LIN route short, control capacitive loading, provide the required ground reference, and follow the datasheet's external-component recommendations. Validate signal integrity and fault recovery with the target baud rate, bus capacitance, pull-up arrangement, and vehicle-network test conditions.
What is the difference between the TJA1027TK/20 and TJA1020?
The TJA1027TK/20 is specified as a LIN 2.x transceiver for 20 kBd in-vehicle subnetworks, with support for LIN 2.0, 2.1, 2.2, 2.2A, SAE J2602, and ISO 17987-4:2016 for 12 V systems. NXP identifies the TJA1020 as pin-compatible with the TJA1027. The practical difference for a redesign is therefore the exact datasheet feature set and qualification of each order code rather than the controller pin assignment.
Where can I buy the TJA1027TK/20 online?
Use the Request a Quote form on this page to request the TJA1027TK/20, current availability, and delivery information. The exact commercial offer should confirm the full order code TJA1027TK/20 rather than a related suffix such as TJA1027TK/20/1J or TJA1027TK/20,118, because those identifiers may represent different order, packaging, or regional conditions.
What is the price of the TJA1027TK/20?
The current commercial price for the TJA1027TK/20 is shown through the Request a Quote form on this page. Quote requests should specify the exact MPN, required quantity, target delivery location, and whether tape-and-reel, tray, or another permitted packing format is needed. Confirm the returned line item as TJA1027TK/20 because similarly named NXP order codes may have different commercial and logistics conditions.
What is the lead time for the TJA1027TK/20?
The current lead time for TJA1027TK/20 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, factory schedule, exact package code, and destination. Include the required annual usage and target delivery schedule in the request so the commercial response can reflect the appropriate production context.
Is the TJA1027TK/20 currently in stock?
Current stock for the TJA1027TK/20 should be confirmed through the Request a Quote form on this page. Stock status can change rapidly and may differ between the exact TJA1027TK/20 order code and related NXP variants. Provide the required quantity and packing preference with the request to obtain a current allocation and delivery commitment.
What are the key specifications of the TJA1027TK/20?
The TJA1027TK/20 is a surface-mount LIN physical-layer transceiver in an 8-HVSON 3 x 3 mm package. Its principal communication rating is 20 kBd, and it supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 for 12 V systems. NXP also identifies the TJA1020 and TJA1021 as pin-compatible.

Dados de referência de engenharia para TJA1027TK/20 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the TJA1027TK/20 when a 12 V automotive design needs a physical-layer LIN transceiver with documented support for LIN 2.0, 2.1, 2.2, 2.2A, SAE J2602, and ISO 17987-4:2016 at up to 20 kBd. Choose the TJA1020 or TJA1021 when NXP's documented pin compatibility allows reuse of an established controller interface and the complete electrical, thermal, and qualification specifications match the target platform. Consider the TJA1022, TJA1029, or MC33662 only after confirming the precise package, features, and order-code ratings. For an existing qualified design, retaining the current device may minimize requalification; for a new LIN 2.x design, the TJA1027TK/20 provides the most directly documented standard coverage.

Comparação com alternativas

Parâmetro Este produto TJA1020 TJA1021 TJA1022 TJA1029 MC33662
Package 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Bus Type LIN LIN LIN LIN LIN LIN
Pin Compatibility Compatible with TJA1020 and TJA1021 Explicitly identified as pin-compatible Explicitly identified as pin-compatible Identified as pin-compatible in cross-reference information Identified as pin-compatible in cross-reference information Identified as pin-compatible in cross-reference information
Application In-vehicle sub-networks LIN bus interface LIN bus interface LIN bus interface LIN bus interface LIN bus interface

Principais diferenciais

  • Explicit LIN 2.x standard coverage (vs TJA1020)
  • Documented compatibility with a broader NXP family set (vs TJA1021)
  • Purpose-built 20 kBd automotive LIN interface (vs MC33662)

Notas de projeto

Implement the logic-side and LIN-side connections using the NXP TJA1027 datasheet application schematic and land pattern. Keep the controller interface traces short, place required decoupling close to the device pins, and route the LIN connection away from sensitive analog or high-speed nets. The 8-HVSON package includes an exposed pad whose connection and solder-process requirements must match the manufacturer drawing.

Preserve a low-impedance common reference between the transceiver, protocol controller, and LIN bus network. Follow the datasheet's termination and external-component arrangement rather than substituting generic values. Check the completed PCB for correct exposed-pad continuity, adequate thermal copper, and clean separation between the sensitive logic interface and the vehicle wiring environment.

Do not substitute a related NXP order code without checking its exact package suffix, electrical limits, temperature grade, qualification, and pin definitions. TJA1027TK/20, TJA1027TK/20/1J, and TJA1027TK/20,118 are distinct commercial identifiers that may differ in packing or regional conditions. Use the manufacturer datasheet to confirm that the candidate uses the required footprint and that every external component remains valid.

Validate the LIN bus with the final wiring length, node count, capacitance, termination, and vehicle transient environment. The 20 kBd maximum rate does not by itself guarantee signal integrity in every installation. Compare measured bus rise time and waveform behavior against the LIN requirements referenced by the TJA1027 datasheet, and retest any change in connectors, harness geometry, or protection components.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product information confirms LIN 2.x, SAE J2602, and ISO 17987-4:2016 protocol compliance but does not provide environmental-material declarations in the cited snippet.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

TJA1027TK/20 datasheet TJA1027TK/20 pinout TJA1027TK/20 datasheet pdf TJA1027TK/20 equivalent TJA1027TK/20 replacement TJA1027TK/20 cross reference TJA1027TK/20 price TJA1027TK/20 stock NXP TJA1027TK/20 TJA1027TK/20 vs TJA1020 TJA1027TK/20 20 kBd LIN TJA1027TK/20 8-HVSON

Componentes & termos relacionados

NXP Semiconductors TJA1027TK/20 TJA1020 TJA1021 TJA1022 TJA1029 MC33662 LIN transceiver physical-layer transceiver Local Interconnect Network LIN bus automotive sub-network 20 kBd LIN 2.0 LIN 2.1 LIN 2.2 LIN 2.2A SAE J2602 ISO 17987-4:2016 8-HVSON HVSON package family surface-mount package body control module door control unit
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ