Texas Instruments

TLV2401ID - 5.5kHz Low-Power RRIO Op Amp | TI

N.º da peça: TLV2401ID ✓ Ativo
16 V Vdss 880 nA per channel Id 8-SOIC Package
MOQ: 1 |

TLV2401ID Visão geral

Texas Instruments TLV2401ID is a single, low-power, rail-to-rail input and output operational amplifier with a 16 V maximum supply voltage and 5.5 kHz gain-bandwidth product. It is packaged in an 8-pin SOIC and combines a typical 880 nA per channel bias current with reverse-battery input protection and 5 V over-the-rail input operation. The device is suitable for portable instrumentation, low-voltage sensing, battery-powered measurement systems, and signal-conditioning circuits that require low power and rail-to-rail operation.

An operational amplifier is an analog signal-processing IC that uses high-gain feedback to amplify or buffer a voltage difference between its two inputs. The TLV2401 belongs to the operational-amplifier hierarchy, where rail-to-rail input and output capability helps the amplifier operate across most of the supply range without requiring separate input or output rail restrictions. This makes it useful for sensors and mixed-signal systems whose operating signals can approach either supply rail.

The principal features of the TLV2401ID include a 5.5 kHz gain-bandwidth product, approximately 880 nA per channel of typical bias current, rail-to-rail inputs and outputs, and operation from a single supply up to 16 V. Reverse-battery protection helps protect the amplifier when input polarity is reversed, while the over-the-rail input capability extends usable input behavior beyond the nominal supply rails under the conditions stated by the manufacturer.

Its low gain-bandwidth product favors low-frequency precision and signal-conditioning tasks rather than wideband waveform processing. At relatively low operating frequencies, a closed-loop amplifier built around this device can provide stable gain with straightforward compensation and external feedback networks. The low bias current also reduces the effect of high-value sensor sources, although actual offset, noise, and bias-current behavior must be evaluated for the intended temperature and supply range.

Typical uses include battery-powered sensor interfaces, portable ECG and biomedical signal conditioning, industrial measurement inputs, low-frequency current sensing, and general-purpose analog buffers. The 8-SOIC format supports conventional surface-mount assembly and PCB prototyping, while the single-amplifier configuration allows designers to avoid unnecessary channel count.

Design with the TLV2401ID by placing input, feedback, and bypass components close to the device and verifying common-mode range, output swing, stability, and noise at the intended supply voltage. The Request a Quote form on this page can provide current commercial availability, lead-time, and order information.

This product page combines the Texas Instruments ordering information, manufacturer datasheet characteristics, package details, drop-in family options, and practical design guidance to help engineers evaluate the TLV2401ID for low-power analog signal-conditioning designs.

Alternativas drop-in para TLV2401ID — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com TLV2401ID (mesmo formato e footprint) — diferindo em Package.

Texas Instruments
Package: 8-pin SOIC (D)
Comparar com TLV2401ID →

TLV2402ID

✅ Drop-In ⚠️ Especificações não verificadas
Texas Instruments
📦 8-SOIC
Dual general-purpose operational amplifier · 2 channels · 16 V · 5.5 kHz · Approximately 900 nA per channel · Rail-to-rail · Rail-to-rail · Yes

✓ Em estoque

$1.4273 / unidade

Ver ficha técnica →

TLV2403ID

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-SOIC
Same 8-SOIC family footprint; power and speed characteristics differ from the 5.5 kHz TLV2401ID, requiring application-level comparison.

📋 Alternativa de referência (fora do catálogo)

TLV2404ID

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-SOIC
Same 8-SOIC family footprint and rail-to-rail function; this family member provides a higher-bandwidth option than the 5.5 kHz TLV2401ID.

📋 Alternativa de referência (fora do catálogo)

TLV2409ID

✅ Drop-In ⚠️ Especificações não verificadas
📦 8-SOIC
Same 8-SOIC family footprint and rail-to-rail function; higher family bandwidth may change phase margin and power use versus the TLV2401ID.

📋 Alternativa de referência (fora do catálogo)

TLV9101ID

✅ Drop-In
📦 8-SOIC
Same single-amplifier 8-SOIC format, but bandwidth rises from 5.5 kHz to 125 kHz and noise falls from the TLV2401ID family level to 50 nV/sqrt(Hz).

📋 Alternativa de referência (fora do catálogo)

TLV2401ID Classificações máximas e características elétricas

Product Type Single operational amplifier
Amplifier Count 1 circuit
Maximum Supply Voltage 16 V
Gain-Bandwidth Product 5.5 kHz
Typical Bias Current 880 nA per channel
Input Type Rail-to-rail input
Tipo de saída Rail-to-rail output
Reverse-Battery Protection 18 V
Over-the-Rail Input Operation 5 V
Typical Specification Supply 5 V
Faixa de temperatura de operação -40°C to +125°C
Encapsulamento 8-SOIC
Package Type Gull-wing surface-mount package
Terminal Count 8
Temperature Grade Automotive
Tipo de montagem Surface mount

Guia de Configuração de Pinos do TLV2401ID gull-wing surface-mount package

Configuração de pinos para TLV2401ID (pacote gull-wing surface-mount package). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote gull-wing surface-mount package para TLV2401ID

Nenhum dado detalhado de pinagem disponível para TLV2401ID.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

TLV2401ID é adequado para 6 aplicaçãos: Battery-Powered Sensor Interface, Portable Biomedical Signal Conditioning, Industrial Process Measurement, Low-Frequency Current Sensing, Portable Data Acquisition, General-Purpose Analog Buffer.

⚡

Battery-Powered Sensor Interface

The TLV2401ID fits low-frequency sensor interfaces because its typical bias current is 880 nA per channel and its rail-to-rail input stage can accept signals near the supply rails. Place the amplifier in a noninverting or transimpedance configuration around the sensor, with the feedback network selected for the required gain and sensor impedance. The 5.5 kHz gain-bandwidth product favors slow-changing measurements rather than fast pulses. Its 16 V maximum supply rating also permits compatibility with higher-voltage single-supply systems, although the selected operating voltage must remain within the manufacturer’s limits. A key design trade-off is that low bandwidth improves power economy but limits closed-loop response and slew capability.

💊

Portable Biomedical Signal Conditioning

The TLV2401ID is useful for conditioning low-amplitude, low-frequency physiological signals where low amplifier bias current helps preserve high source impedance. Its 880 nA per-channel typical bias current is especially relevant when the input source presents substantial resistance, while rail-to-rail input and output operation supports single-supply signal paths. The 5.5 kHz gain-bandwidth product is appropriate for heartbeat, pressure, or temperature waveforms in the low-frequency range. Designers should still evaluate noise, offset, input protection, patient-safety isolation, and electrode-driven transient limits. These protections must be implemented at the system level and confirmed against the device absolute-maximum ratings.

🏭

Industrial Process Measurement

The TLV2401ID can amplify low-level signals from resistive bridges, temperature elements, and other slow-changing industrial sensors because it combines rail-to-rail operation with a typical bias current of 880 nA per channel. Place it close to the sensor to minimize susceptible trace length, and use the amplifier’s gain-bandwidth product to set the usable signal bandwidth. A 5.5 kHz device is appropriate for temperature, pressure, and level channels that do not require wideband transient response. In factory equipment, reverse-battery and over-the-rail input features provide additional robustness, but the design must still include appropriate surge and ESD protection at the connector. Power-supply grounding and sensor-return routing remain critical to useful measurement accuracy.

🔧

Low-Frequency Current Sensing

The TLV2401ID is appropriate for amplifying the small voltage produced by a shunt in low-frequency current measurements when the design prioritizes low power and high input impedance. The typical 880 nA per-channel bias current reduces loading of the sensed node, and rail-to-rail input and output behavior can simplify operation from a single supply. The 5.5 kHz gain-bandwidth product is suitable for measurements that change slowly relative to the amplifier bandwidth. Layout should keep the high-impedance sense connection short and place the differential pair symmetrically to reduce offset pickup. If the shunt signal requires faster settling or larger output swings, a higher-bandwidth family member may be more appropriate.

📱

Portable Data Acquisition

The TLV2401ID supports portable data-acquisition front ends that sample slowly varying analog channels from sensors while operating from a compact battery-powered supply. Its approximately 880 nA per-channel typical bias current helps preserve weak sensor signals, and the 16 V maximum supply rating offers flexibility for higher-voltage analog rails. The 5.5 kHz gain-bandwidth product is well matched to temperature, pressure, potentiometer, and slow position signals rather than high-rate waveform acquisition. Use a common bypass capacitor strategy, maintain symmetric feedback routing, and verify settling behavior for the selected channel-gain combination. The rail-to-rail stages also help maximize usable signal range in compact systems where supply headroom is limited.

🖥️

General-Purpose Analog Buffer

The TLV2401ID can serve as a voltage buffer or gain stage for slow analog signals that require rail-to-rail input and output behavior but not high bandwidth. Its 16 V supply capability supports a broader range of industrial and instrumentation rails, while low typical bias current reduces disturbance to high-impedance sources. Use unity-gain or low-gain feedback arrangements when preserving signal range and stability are priorities. The 5.5 kHz bandwidth provides margin for many control, monitoring, and interface signals, but it should be checked against required loop bandwidth and transient response. Place the bypass capacitor near the supply pins and route feedback traces away from noisy inputs to minimize unintended coupling.

Resumo dos produtos recomendados

TLV2402ID Texas Instruments Usado em: Battery-Powered Sensor Interface, Portable Biomedical Signal Conditioning, Industrial Process Measurement, Portable Data Acquisition, General-Purpose Analog Buffer TLV2403ID Same-package family alternative Usado em: Battery-Powered Sensor Interface, Industrial Process Measurement, Portable Data Acquisition TLV2404ID Higher-bandwidth family alternative Usado em: Portable Biomedical Signal Conditioning, Low-Frequency Current Sensing TLV2409ID Higher-speed same-package alternative Usado em: Low-Frequency Current Sensing TLV9101ID Higher-bandwidth single-amplifier option Usado em: General-Purpose Analog Buffer
What are the key specifications of TLV2401ID that engineers should know?
The TLV2401ID is a single 16 V, 5.5 kHz, rail-to-rail input and output operational amplifier with a typical bias current of 880 nA per channel in an 8-SOIC package. According to the Texas Instruments TLV2401 datasheet, it also provides 18 V reverse-battery protection and 5 V over-the-rail input operation. These characteristics place it among low-power amplifiers intended for low-frequency sensing, buffering, and portable instrumentation rather than high-speed signal processing.
What is the operating voltage of TLV2401ID?
The TLV2401ID supports operation with a maximum supply voltage of 16 V. The manufacturer datasheet states that the listed typical specifications are measured at a 5 V supply, while its rail-to-rail input and output characteristics allow operation across much of the available supply range. The exact minimum and maximum supply limits should be confirmed in the manufacturer’s electrical-characteristics table before finalizing a system power rail.
Where can I download the TLV2401ID datasheet PDF?
The official TLV2401ID datasheet PDF is available from Texas Instruments at the manufacturer PDF link on this page. The document is titled for the TLV2401 family and covers the TLV2401ID ordering option, including its 8-SOIC package, low-power operation, reverse-battery protection, and over-the-rail input behavior. Use the family datasheet together with the ordering information because package and grade suffixes can identify different orderable variants.
Where can I find the TLV2401ID pinout?
The TLV2401ID pin assignment is shown in the pin-configuration section of the Texas Instruments TLV2401 datasheet. The orderable device is specified in an 8-SOIC package, but individual terminal names should be taken directly from the manufacturer diagram when assigning PCB nets. The manufacturer pin-description and package-drawing sections are the authoritative references for orientation, power pins, input pins, output pins, and the package footprint.
Is TLV2401ID suitable for battery-powered sensor applications?
Yes, the TLV2401ID is well suited to battery-powered sensor signal conditioning because its typical bias current is 880 nA per channel and its maximum supply rating is 16 V. Rail-to-rail input and output operation can simplify interfaces to sensors whose signals span most of the available supply voltage. Actual suitability also depends on sensor output impedance, leakage requirements, noise, common-mode range, and the complete power-consumption budget.
What can replace the TLV2401ID?
The closest documented alternatives are other pin-compatible members of the Texas Instruments TLV2401 family, including TLV2402ID, TLV2403ID, TLV2404ID, and TLV2409ID. They share the 8-SOIC format but can differ in bandwidth, bias current, and other electrical characteristics. Before replacing the TLV2401ID, compare the required gain, signal frequency, supply voltage, input impedance, output drive, noise, and stability conditions.
Is the TLV2401ID the same as the TLV9101ID?
No, although both devices are single, low-power, rail-to-rail operational amplifiers, they are optimized for different performance levels. The TLV2401ID has a 5.5 kHz gain-bandwidth product, while Texas Instruments identifies the TLV9101 as having a 125 kHz gain-bandwidth product, a 0.1 V/µs slew rate, and 50 nV/√Hz noise. A direct substitution may fit the footprint electrically, but it changes bandwidth and noise performance.
What is the best Microchip equivalent for TLV2401ID?
A Microchip drop-in equivalent cannot be selected confidently from the available technical records because no verified Microchip cross-reference with an identical 8-SOIC pinout and comparable operating limits is established. Use the Request a Quote form on this page for assistance with current sourcing, but validate any proposed substitute against supply voltage, input bias current, common-mode range, output swing, noise, bandwidth, and stability. Footprint compatibility alone does not guarantee equivalent performance.
When should I choose TLV2401ID over TLV2402ID?
Choose the TLV2401ID when its 5.5 kHz gain-bandwidth product and approximately 880 nA per-channel bias current are appropriate for a low-frequency, low-power design. Consider TLV2402ID when its electrical characteristics better match a higher-bandwidth or lower-bias-current requirement while retaining the same 8-SOIC footprint. The correct choice depends on the highest signal frequency, required closed-loop gain, source impedance, and available supply voltage.
TLV2401ID vs TLV2404ID: which is better for a low-frequency amplifier?
The TLV2401ID is generally preferable when the design specifically targets very low bandwidth, approximately 5.5 kHz, and low power. The TLV2404ID belongs to the same 8-SOIC family but provides a faster-bandwidth option, which may reduce phase margin concerns when operating at higher closed-loop gains or signal frequencies. Verify gain-bandwidth, slew rate, output swing, and stability for the intended feedback network before choosing the faster device.
Can TLV2402ID replace TLV2401ID on the same PCB?
The TLV2402ID is a same-family, 8-SOIC replacement candidate, but it should not be treated as an automatic functional substitute. The family provides similar rail-to-rail operational-amplifier functions, while speed and power-related characteristics can differ. Confirm the required bandwidth, output-current capability, input common-mode range, offset, noise, slew rate, and stability. Preserve decoupling and follow the manufacturer layout guidance for the selected orderable device.
Where to buy TLV2401ID online?
Use the Request a Quote form on this page to request current TLV2401ID availability, pricing, and order routing. The form is the appropriate channel for commercial inquiries because market pricing and inventory can change rapidly. For technical confirmation, consult the Texas Instruments product page and official datasheet, which define the TLV2401ID ordering option, 8-SOIC package, and supported electrical characteristics.
What is the price of TLV2401ID?
Current TLV2401ID pricing is obtained through the Request a Quote form on this page rather than a static price statement. Pricing can vary with order quantity, package suffix, production volume, and market conditions. Submit the required part number and anticipated quantity to receive a current quotation, including commercial terms and any available lead-time information.
What is the lead time for TLV2401ID?
The current lead time for TLV2401ID should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production, component allocation, and packaging requirements. When requesting a quotation, identify the exact TLV2401ID suffix, quantity, and target delivery timing so the commercial response reflects the intended order.
Is TLV2401ID in stock?
Current stock status for TLV2401ID should be confirmed through the Request a Quote form on this page. Because inventory at distribution and assembly channels can change without notice, the current availability response should be treated as the controlling commercial status. Include your required quantity, date code preference, packaging needs, and shipment destination when requesting the quotation.
Does TLV2401ID support input signals above the supply voltage?
Yes, the manufacturer describes 5 V over-the-rail input operation for the TLV2401 family, while also specifying 18 V reverse-battery protection. These features can protect against certain misuse conditions, but they do not permit unlimited input voltage or remove all application risk. The absolute maximum input rating, supply state, device state, and operating conditions in the manufacturer datasheet must still be observed.

Dados de referência de engenharia para TLV2401ID — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the TLV2401ID for low-frequency, low-power analog measurements that benefit from approximately 880 nA per-channel bias current, rail-to-rail input and output behavior, and a documented 5.5 kHz gain-bandwidth product. It is especially suitable for portable sensors, process instrumentation, and buffering applications where very high speed is unnecessary. Consider TLV2402ID or TLV2403ID when their family-specific speed or power characteristics better match the design after reviewing their complete electrical tables. Use TLV2404ID or TLV2409ID when additional bandwidth improves phase margin or transient performance. The TLV9101ID is appropriate when the system needs 125 kHz bandwidth, 50 nV/sqrt(Hz) noise, and a 0.1 V/µs slew rate. For every candidate, verify supply limits, common-mode range, output swing, offset, noise, stability, and package pin assignment before replacing the TLV2401ID.

Comparação com alternativas

Parâmetro Este produto TLV2402ID TLV2403ID TLV2404ID TLV2409ID TLV9101ID
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Count 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Input Type Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Type Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail

Principais diferenciais

  • Lower-bandwidth optimization for slow, low-power measurements (vs TLV9101ID)
  • Lower documented noise density in the higher-bandwidth comparison (vs TLV9101ID)
  • Input and output operation across the supply range (vs TLV2404ID)
  • Reverse-battery and over-the-rail input robustness (vs TLV2402ID)

Notas de projeto

Place the bypass capacitor and amplifier input, output, and feedback components close to their associated pins. Keep the feedback loop compact and route it away from the noninverting input to reduce parasitic coupling and oscillation. For a high-impedance source, minimize the sensitive input trace length and maintain symmetric routing around the differential inputs. The manufacturer pin-configuration and package-drawing sections should guide the physical implementation of the 8-SOIC footprint.

Use the 5.5 kHz gain-bandwidth product as the primary closed-loop bandwidth constraint. For example, a gain of 10 consumes roughly 550 kHz of loop bandwidth, leaving the amplifier near its useful limit and increasing sensitivity to phase-margin changes. Select feedback resistors that do not load the output excessively, and verify stability with the actual source impedance, load capacitance, supply decoupling, and intended output range. A faster family member may be preferable when larger phase margin or faster settling is required.

Do not assume that reverse-battery and over-the-rail input capability makes every input condition safe. The 18 V reverse-battery rating and 5 V over-the-rail operation must be interpreted together with the absolute-maximum table, supply state, and device operating state. External series resistance, clamps, or other protection may still be required for transients, hot-plug events, and connector exposure. Check all input and output voltages against the manufacturer limits before power-up.

The low typical bias current of 880 nA per channel is a key advantage for battery-powered operation, but total system consumption also includes the supply current associated with the chosen feedback network and load. Estimate the average current from the amplifier quiescent current, load demand, sensor current, and regulator efficiency. Ensure the source can support startup and output transients, and include the bypass capacitor specified by the manufacturer close to the power pins.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The TLV2401ID orderable device is described as automotive grade, but an explicit AEC-Q100 qualification statement and other environmental compliance declarations are not present in the available product records.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

TLV2401ID datasheet TLV2401ID pinout TLV2401ID datasheet pdf TLV2401ID equivalent TLV2401ID replacement TLV2401ID cross reference TLV2401ID vs TLV9101ID TLV2401ID 8-SOIC pinout TLV2401ID application circuit Texas Instruments TLV2401ID TLV2401ID price TLV2401ID stock TLV2401ID 5.5kHz amplifier TLV2401ID rail-to-rail op amp

Componentes & termos relacionados

Texas Instruments TLV2401ID TLV2402ID TLV2403ID TLV2404ID TLV2409ID TLV9101ID operational amplifier rail-to-rail input rail-to-rail output low-dropout operational amplifier analog signal conditioning gain-bandwidth product input bias current reverse-battery protection over-the-rail input operation 8-SOIC SOIC package family surface-mount package battery-powered sensing industrial instrumentation biomedical signal conditioning portable data acquisition semiconductor
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ