TLV2401ID - 5.5kHz Low-Power RRIO Op Amp | TI
MPN: TLV2401ID ✓ 啟用中TLV2401ID 概覽
An operational amplifier is an analog signal-processing IC that uses high-gain feedback to amplify or buffer a voltage difference between its two inputs. The TLV2401 belongs to the operational-amplifier hierarchy, where rail-to-rail input and output capability helps the amplifier operate across most of the supply range without requiring separate input or output rail restrictions. This makes it useful for sensors and mixed-signal systems whose operating signals can approach either supply rail.
The principal features of the TLV2401ID include a 5.5 kHz gain-bandwidth product, approximately 880 nA per channel of typical bias current, rail-to-rail inputs and outputs, and operation from a single supply up to 16 V. Reverse-battery protection helps protect the amplifier when input polarity is reversed, while the over-the-rail input capability extends usable input behavior beyond the nominal supply rails under the conditions stated by the manufacturer.
Its low gain-bandwidth product favors low-frequency precision and signal-conditioning tasks rather than wideband waveform processing. At relatively low operating frequencies, a closed-loop amplifier built around this device can provide stable gain with straightforward compensation and external feedback networks. The low bias current also reduces the effect of high-value sensor sources, although actual offset, noise, and bias-current behavior must be evaluated for the intended temperature and supply range.
Typical uses include battery-powered sensor interfaces, portable ECG and biomedical signal conditioning, industrial measurement inputs, low-frequency current sensing, and general-purpose analog buffers. The 8-SOIC format supports conventional surface-mount assembly and PCB prototyping, while the single-amplifier configuration allows designers to avoid unnecessary channel count.
Design with the TLV2401ID by placing input, feedback, and bypass components close to the device and verifying common-mode range, output swing, stability, and noise at the intended supply voltage. The Request a Quote form on this page can provide current commercial availability, lead-time, and order information.
This product page combines the Texas Instruments ordering information, manufacturer datasheet characteristics, package details, drop-in family options, and practical design guidance to help engineers evaluate the TLV2401ID for low-power analog signal-conditioning designs.
直接替換替代品,適用於 TLV2401ID — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TLV2401ID (相同外形與佔位) — 差異在於 Package.
TLV2402ID
✅ 直接替換 ⚠️ 規格未經驗證✓ 有庫存
$1.4273 / 單位
查看資料表 →TLV2403ID
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
TLV2404ID
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
TLV2409ID
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
TLV9101ID
✅ 直接替換📋 參考替代品(不在目錄中)
TLV2401ID 最大額定值與電氣特性
| Product Type | Single operational amplifier |
| Amplifier Count | 1 circuit |
| Maximum Supply Voltage | 16 V |
| Gain-Bandwidth Product | 5.5 kHz |
| Typical Bias Current | 880 nA per channel |
| Input Type | Rail-to-rail input |
| 輸出類型 | Rail-to-rail output |
| Reverse-Battery Protection | 18 V |
| Over-the-Rail Input Operation | 5 V |
| Typical Specification Supply | 5 V |
| 工作溫度範圍 | -40°C to +125°C |
| 封裝 | 8-SOIC |
| Package Type | Gull-wing surface-mount package |
| Terminal Count | 8 |
| Temperature Grade | Automotive |
| 安裝類型 | Surface mount |
TLV2401ID gull-wing surface-mount package 腳位配置指南
TLV2401ID(gull-wing surface-mount package 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TLV2401ID.
請參閱 資料表 以查看完整腳位配置。
典型應用
TLV2401ID 適用於 6 應用s: Battery-Powered Sensor Interface, Portable Biomedical Signal Conditioning, Industrial Process Measurement, Low-Frequency Current Sensing, Portable Data Acquisition, General-Purpose Analog Buffer.
Battery-Powered Sensor Interface
The TLV2401ID fits low-frequency sensor interfaces because its typical bias current is 880 nA per channel and its rail-to-rail input stage can accept signals near the supply rails. Place the amplifier in a noninverting or transimpedance configuration around the sensor, with the feedback network selected for the required gain and sensor impedance. The 5.5 kHz gain-bandwidth product favors slow-changing measurements rather than fast pulses. Its 16 V maximum supply rating also permits compatibility with higher-voltage single-supply systems, although the selected operating voltage must remain within the manufacturer’s limits. A key design trade-off is that low bandwidth improves power economy but limits closed-loop response and slew capability.
推薦
Portable Biomedical Signal Conditioning
The TLV2401ID is useful for conditioning low-amplitude, low-frequency physiological signals where low amplifier bias current helps preserve high source impedance. Its 880 nA per-channel typical bias current is especially relevant when the input source presents substantial resistance, while rail-to-rail input and output operation supports single-supply signal paths. The 5.5 kHz gain-bandwidth product is appropriate for heartbeat, pressure, or temperature waveforms in the low-frequency range. Designers should still evaluate noise, offset, input protection, patient-safety isolation, and electrode-driven transient limits. These protections must be implemented at the system level and confirmed against the device absolute-maximum ratings.
推薦
Industrial Process Measurement
The TLV2401ID can amplify low-level signals from resistive bridges, temperature elements, and other slow-changing industrial sensors because it combines rail-to-rail operation with a typical bias current of 880 nA per channel. Place it close to the sensor to minimize susceptible trace length, and use the amplifier’s gain-bandwidth product to set the usable signal bandwidth. A 5.5 kHz device is appropriate for temperature, pressure, and level channels that do not require wideband transient response. In factory equipment, reverse-battery and over-the-rail input features provide additional robustness, but the design must still include appropriate surge and ESD protection at the connector. Power-supply grounding and sensor-return routing remain critical to useful measurement accuracy.
推薦
Low-Frequency Current Sensing
The TLV2401ID is appropriate for amplifying the small voltage produced by a shunt in low-frequency current measurements when the design prioritizes low power and high input impedance. The typical 880 nA per-channel bias current reduces loading of the sensed node, and rail-to-rail input and output behavior can simplify operation from a single supply. The 5.5 kHz gain-bandwidth product is suitable for measurements that change slowly relative to the amplifier bandwidth. Layout should keep the high-impedance sense connection short and place the differential pair symmetrically to reduce offset pickup. If the shunt signal requires faster settling or larger output swings, a higher-bandwidth family member may be more appropriate.
推薦
Portable Data Acquisition
The TLV2401ID supports portable data-acquisition front ends that sample slowly varying analog channels from sensors while operating from a compact battery-powered supply. Its approximately 880 nA per-channel typical bias current helps preserve weak sensor signals, and the 16 V maximum supply rating offers flexibility for higher-voltage analog rails. The 5.5 kHz gain-bandwidth product is well matched to temperature, pressure, potentiometer, and slow position signals rather than high-rate waveform acquisition. Use a common bypass capacitor strategy, maintain symmetric feedback routing, and verify settling behavior for the selected channel-gain combination. The rail-to-rail stages also help maximize usable signal range in compact systems where supply headroom is limited.
推薦
General-Purpose Analog Buffer
The TLV2401ID can serve as a voltage buffer or gain stage for slow analog signals that require rail-to-rail input and output behavior but not high bandwidth. Its 16 V supply capability supports a broader range of industrial and instrumentation rails, while low typical bias current reduces disturbance to high-impedance sources. Use unity-gain or low-gain feedback arrangements when preserving signal range and stability are priorities. The 5.5 kHz bandwidth provides margin for many control, monitoring, and interface signals, but it should be checked against required loop bandwidth and transient response. Place the bypass capacitor near the supply pins and route feedback traces away from noisy inputs to minimize unintended coupling.
推薦
推薦產品摘要
工程參考資料,適用於 TLV2401ID — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TLV2402ID | TLV2403ID | TLV2404ID | TLV2409ID | TLV9101ID |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Amplifier Count | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Input Type | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Type | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
主要差異化特點
- Lower-bandwidth optimization for slow, low-power measurements (對比TLV9101ID)
- Lower documented noise density in the higher-bandwidth comparison (對比TLV9101ID)
- Input and output operation across the supply range (對比TLV2404ID)
- Reverse-battery and over-the-rail input robustness (對比TLV2402ID)
設計說明
Place the bypass capacitor and amplifier input, output, and feedback components close to their associated pins. Keep the feedback loop compact and route it away from the noninverting input to reduce parasitic coupling and oscillation. For a high-impedance source, minimize the sensitive input trace length and maintain symmetric routing around the differential inputs. The manufacturer pin-configuration and package-drawing sections should guide the physical implementation of the 8-SOIC footprint.
Use the 5.5 kHz gain-bandwidth product as the primary closed-loop bandwidth constraint. For example, a gain of 10 consumes roughly 550 kHz of loop bandwidth, leaving the amplifier near its useful limit and increasing sensitivity to phase-margin changes. Select feedback resistors that do not load the output excessively, and verify stability with the actual source impedance, load capacitance, supply decoupling, and intended output range. A faster family member may be preferable when larger phase margin or faster settling is required.
Do not assume that reverse-battery and over-the-rail input capability makes every input condition safe. The 18 V reverse-battery rating and 5 V over-the-rail operation must be interpreted together with the absolute-maximum table, supply state, and device operating state. External series resistance, clamps, or other protection may still be required for transients, hot-plug events, and connector exposure. Check all input and output voltages against the manufacturer limits before power-up.
The low typical bias current of 880 nA per channel is a key advantage for battery-powered operation, but total system consumption also includes the supply current associated with the chosen feedback network and load. Estimate the average current from the amplifier quiescent current, load demand, sensor current, and regulator efficiency. Ensure the source can support startup and output transients, and include the bypass capacitor specified by the manufacturer close to the power pins.
合規資訊
The TLV2401ID orderable device is described as automotive grade, but an explicit AEC-Q100 qualification statement and other environmental compliance declarations are not present in the available product records.