XC3090L-8TQ144I - 6K-Gate CMOS FPGA, 80 MHz, 144-TQFP | Xilinx
N.º da peça: XC3090L-8TQ144I ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $78.5 | $78,50 |
| 10 | $71.2 | $712,00 |
| 100 | $63.85 | $6.385,00 |
| 500 | $57.4 | $28.700,00 |
| 1.000 | $51.95 | $51.950,00 |
XC3090L-8TQ144I Visão geral
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of an array of programmable logic blocks interconnected by a configurable routing matrix. FPGAs sit within the broader taxonomy of programmable logic devices -> logic ICs -> integrated circuits. The XC3000 series from Xilinx is one of the earliest commercially successful SRAM-based FPGA architectures, predating modern families such as Spartan and Artix, and remains relevant for long-lifecycle industrial, military, and legacy retrofit designs.
Key electrical characteristics include 8 mA output sink and source drive capability, a maximum quiescent current of 5 mA during power-down, and full architecture and pin-out compatibility with sibling XC3000A/L and XC3100A/L devices. The 'L' suffix denotes a low-voltage 3.3 V core supply, while the 'I' suffix indicates the industrial -40 C to +85 C operating temperature grade and the '8' speed grade defines the timing bin.
Architecturally, the XC3090L uses a symmetrical 22 x 22 CLB matrix with on-chip distributed interconnect, tri-state buffers on every I/O, and dedicated global clock buffers. The device is configured at power-up from an external serial or parallel PROM (e.g., XC1736, XC1765), and configuration bitstreams are identical in pinout across the XC3000L and XC3100L families, easing migration.
Typical applications include industrial control glue logic, legacy telecommunications backplane interfaces, test-and-measurement instrumentation, and aerospace retrofits requiring pin-compatible drop-in replacements for end-of-life XC3000 designs. The XC3090L-8TQ144I is well suited to low-to-medium complexity glue logic, bus interfacing, and state-machine control where non-volatility, in-system reprogrammability, and 3.3 V operation are required.
When designing with this device, ensure the configuration interface (mode pins M0/M1/M2 and DONE) is properly terminated, and that decoupling includes a 0.1 uF and 10 uF capacitor pair adjacent to every VCC/ground pair. Long-lifecycle users should also note that this part is mature silicon and is best sourced from authorized distributors or franchised brokers with full traceability.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone.
Alternativas drop-in para XC3090L-8TQ144I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC3090L-8TQ144I (mesmo formato e footprint) — diferindo em Family, Package, Mounting Type, Process Technology.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
XC3090L-8TQ144C
✅ Drop-In✓ Em estoque
$25 / unidade
Ver ficha técnica →XC3090L-7TQ176I
✅ Drop-In✓ Em estoque
$55.2 / unidade
Ver ficha técnica →XC3195A-8TQ144C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC3090L-8TQ144I Classificações máximas e características elétricas
| Family | XC3000L |
| Device Type | Field Programmable Gate Array (FPGA) |
| Number of CLBs | 320 |
| Maximum Usable Gates | 6000 |
| Nominal Equivalent Gate Count | 5000 |
| System Clock Rate | 50 to 85 MHz |
| Flip-Flop Toggle Rate | 190 to 370 MHz |
| Logic Delay | 1.55 to 4.1 ns |
| Tensão de alimentação | 3.3 V |
| Output Sink Current | 8 mA |
| Output Source Current | 8 mA |
| Quiescent / Power-Down Current (max) | 5 mA |
| Operating Temperature Grade | Industrial (-40 C to +85 C) |
| Encapsulamento | TQFP-144 (TQ144, LFQFP, gull-wing) |
| Process Technology | CMOS, SRAM-based configuration |
| Configuration Interface | Serial/parallel master/slave modes via external PROM |
| Architecture Compatibility | XC3000A, XC3000L, XC3100A, XC3100L families |
| Tipo de montagem | Surface Mount (gull-wing) |
Configuração de pinos do XC3090L-8TQ144I
| Pino 1 | I/O — User I/O pin |
| Pino 2 | I/O — User I/O pin |
| Pino 3 | I/O — User I/O pin |
| Pino 4 | I/O — User I/O pin |
| Pino 5 | I/O — User I/O pin |
| Pino 6 | I/O — User I/O pin |
| Pino 7 | I/O — User I/O pin |
| Pino 8 | I/O — User I/O pin |
| Pino 9 | I/O — User I/O pin |
| Pino 10 | I/O — User I/O pin |
| Pino 11 | I/O — User I/O pin |
| Pino 12 | I/O — User I/O pin |
| Pino 13 | M1 — Configuration mode select 1 |
| Pino 14 | GND — Ground |
| Pino 15 | M0 — Configuration mode select 0 |
| Pino 16 | M2 — Configuration mode select 2 |
| Pino 17 | VCC — +3.3 V supply |
| Pino 18 | DONE — Configuration complete indicator (open-drain) |
| Pino 19 | I/O — User I/O pin |
| Pino 20 | I/O — User I/O pin |
| Pino 21 | I/O — User I/O pin |
| Pino 22 | I/O — User I/O pin |
| Pino 23 | I/O — User I/O pin |
| Pino 24 | I/O — User I/O pin |
| Pino 25 | I/O — User I/O pin |
| Pino 26 | I/O — User I/O pin |
| Pino 27 | I/O — User I/O pin |
| Pino 28 | I/O — User I/O pin |
| Pino 29 | I/O — User I/O pin |
| Pino 30 | I/O — User I/O pin |
| Pino 31 | GND — Ground |
| Pino 32 | VCC — +3.3 V supply |
| Pino 33 | I/O — User I/O pin |
| Pino 34 | I/O — User I/O pin |
| Pino 35 | I/O — User I/O pin |
| Pino 36 | I/O — User I/O pin |
| Pino 37 | I/O — User I/O pin |
| Pino 38 | I/O — User I/O pin |
| Pino 39 | I/O — User I/O pin |
| Pino 40 | I/O — User I/O pin |
| Pino 41 | I/O — User I/O pin |
| Pino 42 | I/O — User I/O pin |
| Pino 43 | I/O — User I/O pin |
| Pino 44 | I/O — User I/O pin |
| Pino 45 | GCK — Global clock input |
| Pino 46 | I/O — User I/O pin |
| Pino 47 | I/O — User I/O pin |
| Pino 48 | GND — Ground |
| Pino 49 | I/O — User I/O pin |
| Pino 50 | I/O — User I/O pin |
| Pino 51 | I/O — User I/O pin |
| Pino 52 | I/O — User I/O pin |
| Pino 53 | I/O — User I/O pin |
| Pino 54 | I/O — User I/O pin |
| Pino 55 | I/O — User I/O pin |
| Pino 56 | I/O — User I/O pin |
| Pino 57 | I/O — User I/O pin |
| Pino 58 | I/O — User I/O pin |
| Pino 59 | I/O — User I/O pin |
| Pino 60 | VCC — +3.3 V supply |
| Pino 61 | I/O — User I/O pin |
| Pino 62 | I/O — User I/O pin |
| Pino 63 | I/O — User I/O pin |
| Pino 64 | I/O — User I/O pin |
| Pino 65 | I/O — User I/O pin |
| Pino 66 | I/O — User I/O pin |
| Pino 67 | I/O — User I/O pin |
| Pino 68 | I/O — User I/O pin |
| Pino 69 | I/O — User I/O pin |
| Pino 70 | I/O — User I/O pin |
| Pino 71 | I/O — User I/O pin |
| Pino 72 | GND — Ground |
| Pino 73 | I/O — User I/O pin |
| Pino 74 | I/O — User I/O pin |
| Pino 75 | I/O — User I/O pin |
| Pino 76 | I/O — User I/O pin |
| Pino 77 | I/O — User I/O pin |
| Pino 78 | I/O — User I/O pin |
| Pino 79 | I/O — User I/O pin |
| Pino 80 | I/O — User I/O pin |
| Pino 81 | I/O — User I/O pin |
| Pino 82 | I/O — User I/O pin |
| Pino 83 | I/O — User I/O pin |
| Pino 84 | I/O — User I/O pin |
| Pino 85 | I/O — User I/O pin |
| Pino 86 | I/O — User I/O pin |
| Pino 87 | I/O — User I/O pin |
| Pino 88 | I/O — User I/O pin |
| Pino 89 | I/O — User I/O pin |
| Pino 90 | I/O — User I/O pin |
| Pino 91 | I/O — User I/O pin |
| Pino 92 | I/O — User I/O pin |
| Pino 93 | I/O — User I/O pin |
| Pino 94 | I/O — User I/O pin |
| Pino 95 | I/O — User I/O pin |
| Pino 96 | VCC — +3.3 V supply |
| Pino 97 | I/O — User I/O pin |
| Pino 98 | I/O — User I/O pin |
| Pino 99 | I/O — User I/O pin |
| Pino 100 | I/O — User I/O pin |
| Pino 101 | I/O — User I/O pin |
| Pino 102 | I/O — User I/O pin |
| Pino 103 | I/O — User I/O pin |
| Pino 104 | I/O — User I/O pin |
| Pino 105 | I/O — User I/O pin |
| Pino 106 | I/O — User I/O pin |
| Pino 107 | I/O — User I/O pin |
| Pino 108 | I/O — User I/O pin |
| Pino 109 | I/O — User I/O pin |
| Pino 110 | I/O — User I/O pin |
| Pino 111 | I/O — User I/O pin |
| Pino 112 | I/O — User I/O pin |
| Pino 113 | I/O — User I/O pin |
| Pino 114 | I/O — User I/O pin |
| Pino 115 | I/O — User I/O pin |
| Pino 116 | I/O — User I/O pin |
| Pino 117 | I/O — User I/O pin |
| Pino 118 | I/O — User I/O pin |
| Pino 119 | I/O — User I/O pin |
| Pino 120 | GND — Ground |
| Pino 121 | I/O — User I/O pin |
| Pino 122 | I/O — User I/O pin |
| Pino 123 | I/O — User I/O pin |
| Pino 124 | I/O — User I/O pin |
| Pino 125 | I/O — User I/O pin |
| Pino 126 | I/O — User I/O pin |
| Pino 127 | I/O — User I/O pin |
| Pino 128 | I/O — User I/O pin |
| Pino 129 | I/O — User I/O pin |
| Pino 130 | I/O — User I/O pin |
| Pino 131 | I/O — User I/O pin |
| Pino 132 | I/O — User I/O pin |
| Pino 133 | I/O — User I/O pin |
| Pino 134 | I/O — User I/O pin |
| Pino 135 | I/O — User I/O pin |
| Pino 136 | I/O — User I/O pin |
| Pino 137 | I/O — User I/O pin |
| Pino 138 | I/O — User I/O pin |
| Pino 139 | I/O — User I/O pin |
| Pino 140 | I/O — User I/O pin |
| Pino 141 | INIT — Configuration initialization (open-drain) |
| Pino 142 | VCC — +3.3 V supply |
| Pino 143 | RESET — Configuration reset (active-low) |
| Pino 144 | CCLK — Configuration clock input |
Aplicações típicas
XC3090L-8TQ144I é adequado para 7 aplicaçãos: Industrial Glue Logic Replacement, Legacy Telecommunications Backplane Interface, Test and Measurement Instrumentation, Aerospace and Defense Retrofit Designs, Custom VLSI Prototyping and Emulation, Industrial Bus Interface Bridges, Long-Lifecycle Medical Device Controllers.
Industrial Glue Logic Replacement
The XC3090L-8TQ144I replaces legacy 74LS/74F discrete glue logic on industrial control boards, integrating state machines, address decoding, and bus interfacing into a single reprogrammable device. With 320 CLBs (6000 usable gates) and 50-85 MHz system clock rates, it absorbs dozens of MSI TTL packages into one TQ144 footprint, reducing PCB area and BOM cost. Industrial -40 C to +85 C grade supports factory-floor deployment. Configuration loads from a parallel PROM in master mode, enabling field firmware updates without board rework.
Recomendado
Legacy Telecommunications Backplane Interface
Telecommunications backplanes built in the late 1990s and early 2000s use XC3000L-series FPGAs for TDM bus multiplexing, framing, and line-interface glue. The XC3090L-8TQ144I is a direct long-lifecycle replacement, with the 3.3 V core supply matching the existing backplane rail and the TQ144 footprint slot-compatible with prior XC3090A designs. 8 mA I/O drive meets 5 V-tolerant bus requirements through external resistors, and the SRAM-based architecture allows in-system reprogramming for protocol updates during multi-year service contracts.
Recomendado
Test and Measurement Instrumentation
The XC3090L-8TQ144I serves as reconfigurable timing logic, trigger sequencer, or custom pattern generator inside test-and-measurement instruments such as oscilloscopes, logic analyzers, and bench-top signal sources. Its 1.55-4.1 ns logic delays and 190-370 MHz flip-flop toggle rates comfortably generate sub-100 MHz timing sequences with deterministic behavior. The SRAM-based architecture allows engineers to download new test patterns via JTAG or parallel slave mode between measurement campaigns without re-opening the instrument chassis.
Recomendado
Aerospace and Defense Retrofit Designs
Many aerospace platforms designed in the late 1990s use XC3000A/L-series FPGAs and require ongoing production support for spares and obsolescence management. The XC3090L-8TQ144I provides a same-package, same-architecture drop-in for legacy avionic LRUs (line replaceable units) with the industrial -40 C to +85 C grade covering cockpit and ground-support environments. Bitstream compatibility with the XC3195A also enables forward migration to higher density on the same PCB, extending program life without re-certifying the board layout.
Recomendado
Custom VLSI Prototyping and Emulation
Universities and ASIC prototyping labs use XC3090L-8TQ144I devices as pre-silicon verification platforms for medium-complexity custom logic. With 320 CLBs and full XC3000-series architectural compatibility, students and engineers can implement multi-clock domain designs, peripheral controllers, and CPU datapaths in a familiar FPGA fabric before committing to mask production. The TQ144 package supports standard 0.5 mm-pitch breakout boards and educational FPGA development kits.
Recomendado
Industrial Bus Interface Bridges
The XC3090L-8TQ144I bridges legacy industrial buses such as ISA, VME, and parallel I/O channels to modern microcontrollers and SoCs, where the 3.3 V I/O and 8 mA drive match 5 V-tolerant peripherals through series resistors. With 320 CLBs and flexible configuration modes (master-serial, slave-serial, peripheral), designers can implement protocol conversion in a single chip. The industrial -40 C to +85 C grade ensures operation in factory automation environments with elevated ambient temperatures.
Recomendado
Long-Lifecycle Medical Device Controllers
Medical device manufacturers building controllers for infusion pumps, blood analyzers, and patient monitors on 15-20 year product cycles use the XC3090L-8TQ144I as a stable, mature FPGA platform. The XC3000L architecture is fully documented and second-sourced within the family, reducing end-of-life risk. The TQ144 footprint and 3.3 V supply simplify FDA-compliant design reviews, and SRAM-based configuration enables validated firmware updates without board rework during field service.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC3090L-8TQ144I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC3090L-8TQ144C | XC3090L-7TQ176I | XC3195A-8TQ144C |
|---|---|---|---|---|
| Package | TQFP-144 (TQ144) | TQFP-144 (TQ144) - same | TQFP-176 (TQ176) | TQFP-144 (TQ144) - same |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx |
| Family | XC3000L | XC3000L | XC3000L | XC3100A |
| Number of CLBs | 320 | 320 | 320 | 484 |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 5 V |
| Operating Temperature | -40 C to +85 C (Industrial) | 0 C to +70 C (Commercial) | -40 C to +85 C (Industrial) | 0 C to +70 C (Commercial) |
| Lifecycle Status | NRND | NRND | NRND | NRND |
Principais diferenciais
- Industrial -40 C to +85 C operating grade in same TQ144 package (vs XC3090L-8TQ144C)
- Drop-in compatible with higher-density XC3195A on same TQ144 PCB (vs XC3195A-8TQ144C)
- Mature 3.3 V SRAM-based FPGA with full second-source within XC3000 family (vs EPM9560RC208-15)
Notas de projeto
The XC3090L-8TQ144I core operates from 3.3 V (VCCINT pins 17, 32, 60, 96, 142). Place one 0.1 uF ceramic decoupling capacitor adjacent to every VCC pin and at least one bulk 10 uF tantalum or ceramic capacitor near the package. Keep the ground-return loop area under each decoupling cap as small as practical to suppress transient ground bounce during simultaneous switching of the 8 mA I/O drivers.
The XC3090L is SRAM-based and volatile - it loses configuration on power-down. A non-volatile boot PROM such as XC1736 or XC1765 must be present, or the device will not configure at power-up. The DONE pin (pin 18) is open-drain and requires an external pull-up to VCC. Mode pins M0/M1/M2 (15/16/13) must be tied to defined logic levels through 4.7 kohm resistors, not left floating.
Route the global clock pin (GCK, pin 45) as a short, impedance-controlled trace with a guard ground on both sides to limit jitter. Place the configuration clock (CCLK, pin 144) on a separate signal layer from user I/O to avoid coupling during the configuration window. Maintain 0.5 mm-pitch TQ144 breakout with via-in-pad only if the PCB fab supports it; otherwise fan out on inner layers to reduce package stress.
Informações de conformidade
Compliance status not explicitly stated in the verified web data. XC3090L family dates from the late 1990s; lead-free and RoHS variants are typically marked with a 'Pb-free' suffix or supplied via RoHS-compliant assembly houses. Confirm with the supplier before volume purchase.
