Advanced Micro Devices, Inc.

XC7A100T-L1FGG484I - 101,440 Logic Elements FPGA | AMD

N.º da peça: XC7A100T-L1FGG484I ✓ Ativo
0.95 V to 1.05 V Vdss 484-BBGA FGG484 package Package -1 speed grade Speed
MOQ: 1 |

XC7A100T-L1FGG484I Visão geral

Advanced Micro Devices XC7A100T-L1FGG484I is an Artix-7 field-programmable gate array with 101,440 programmable logic elements, 7,925 logic array blocks, 4,976,640 bits of block RAM, and 250 user I/O pins. The device uses a 0.95 V to 1.05 V core supply and is specified for an industrial junction-temperature range of -40°C to 100°C in a 484-BBGA FGG484 package.

An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnects, block RAM, digital signal processing resources, and input/output blocks. The Artix-7 family sits within the broader FPGA and programmable-logic hierarchy, combining high-density programmable logic with relatively low power consumption and system-on-chip capabilities. A design is created through synthesis, placement, and routing before its bitstream is loaded into the FPGA or its configuration memory.

The XC7A100T-L1FGG484I provides 101,440 logic elements and 4,976,640 RAM bits, making it suitable for embedded control, industrial automation, communications, instrumentation, and general-purpose digital signal processing. Its 250 user I/O pins permit interfaces to external memories, converters, transceivers, sensors, and display or communication peripherals. The -1 designation identifies its device speed grade within the Artix-7 ordering scheme.

Within the device, programmable logic is organized into logic array blocks connected by a programmable routing network. Dedicated block RAM preserves data between clock cycles, while DSP resources accelerate arithmetic operations commonly used in filters, transforms, and control algorithms. Configuration and power-management blocks coordinate startup, bitstream loading, internal references, and sequencing of the device's supply rails.

Typical implementations include factory automation controllers, compact industrial gateways, video and imaging pipelines, laboratory instruments, embedded communications systems, and low-power edge-processing platforms. The FGG484 package is particularly useful when a board requires more I/O than smaller Artix-7 packages provide while retaining a lower pin count than the largest packages in the family.

Power and signal-integrity design remain important at system level. Place decoupling capacitors beside the appropriate power and ground balls, route high-speed interfaces with controlled impedance, and follow AMD's package pinout and UG475 guidance when assigning balls and configuring I/O standards. Validate the complete power tree, configuration scheme, thermal environment, and external memory interface before releasing production hardware.

This page combines the device's electrical characteristics, package and pinout references, commercially relevant source links, same-footprint replacement options, and practical design guidance. It is intended to help engineers determine whether the XC7A100T-L1FGG484I fits an existing PCB and whether a speed-grade or temperature-grade variant is appropriate for the target application.

Alternativas drop-in para XC7A100T-L1FGG484I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com XC7A100T-L1FGG484I (mesmo formato e footprint) — diferindo em Package, Speed Grade, Logic Cells, Device Type, Core Supply Voltage.

AMD
Package: 484-BBGA (FGG484)
Speed Grade: -1
Logic Cells: 101440
Comparar com XC7A100T-L1FGG484I →
AMD
Package: 484-BBGA
Logic Cells: 101440 cells
Device Type: FPGA IC
Comparar com XC7A100T-L1FGG484I →
AMD
Package: 484-FCBGA, 484 balls
Speed Grade: -2
Logic Cells: 101,440 cells
Comparar com XC7A100T-L1FGG484I →
AMD
Package: 484-ball FBGA (FGG484)
Speed Grade: -2
Logic Cells: 101440
Comparar com XC7A100T-L1FGG484I →
AMD
Package: 484-ball BGA (FGG484)
Speed Grade: -3
Logic Cells: 101,440 cells
Comparar com XC7A100T-L1FGG484I →

XC7A100T-1FGG484I

✅ Drop-In
AMD
📦 484-BBGA FGG484
Artix-7 · 101440 · 285 · 4976640 bits · 28nm · 1V · 484-BBGA (FGG484) · Surface Mount

Consulte o preço

Ver ficha técnica →

XC7A100T-2FGG484I

✅ Drop-In
AMD
📦 484-BBGA FGG484
101440 · 285 · 4976640 bits · 240 (DSP48E1) · 10 (MMCM + PLL) · -2 · 628 MHz · 0.95 V to 1.05 V (nominal 1.0 V)

✓ Em estoque

$45.9375 / unidade

Ver ficha técnica →

XC7A100T-3FGG484E

✅ Drop-In ⚠️ Especificações não verificadas
AMD
📦 484-BBGA FGG484
Artix-7 · Field-programmable gate array (FPGA) · 101,440 cells · 285 I/Os · 484-ball BGA (FGG484) · 28 nm · 1 V · -3

Consulte o preço

Ver ficha técnica →

XC7A100T-2FGG484C

✅ Drop-In
AMD
📦 484-BBGA FGG484
Artix-7 · Field-Programmable Gate Array (FPGA) · 101,440 cells · 285 I/O · 484-FCBGA, 484 balls · 28 nm · -2 · Commercial

Consulte o preço

Ver ficha técnica →

XC7A100T-2FG484I

✅ Drop-In
AMD
📦 484-BBGA FGG484
Artix-7 Field Programmable Gate Array (FPGA) · AMD · Artix-7 · 101440 cells · 285 I/O · 484-BBGA · -2 speed grade · Industrial

Consulte o preço

Ver ficha técnica →

XC7A100T-L1FGG484I Classificações máximas e características elétricas

Device Type Artix-7 field-programmable gate array (FPGA)
Programmable Logic Elements 101,440 logic elements
Logic Array Blocks 7,925 logic array blocks
Block RAM 4,976,640 RAM bits
User I/O Pins 250 user I/O pins
Core Supply Voltage 0.95 V to 1.05 V
Speed Grade -1 speed grade
Junction Temperature Range -40°C to +100°C
Encapsulamento 484-BBGA FGG484 package
Package Pin Count 484 pins
Tipo de montagem Surface-mount flip-chip BGA

Guia de Configuração de Pinos do XC7A100T-L1FGG484I 484 pins

Configuração de pinos para XC7A100T-L1FGG484I (pacote 484 pins). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 484 pins para XC7A100T-L1FGG484I

Nenhum dado detalhado de pinagem disponível para XC7A100T-L1FGG484I.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

XC7A100T-L1FGG484I é adequado para 6 aplicaçãos: Industrial Automation Controllers, Industrial Communications Gateways, Machine Vision and Imaging Preprocessing, Digital Signal Processing and Control, Instrumentation and Test Equipment, Embedded Security and Access Control.

🏭

Industrial Automation Controllers

The XC7A100T-L1FGG484I fits industrial automation controllers that must coordinate sensors, actuators, communications, and safety-related logic in one programmable device. Its 101,440 logic elements can implement finite-state machines, motion sequences, interlocks, and data-processing pipelines, while 4,976,640 RAM bits provide local buffers for counters, histories, and communication frames. The 250 user I/O pins reduce the need for external interface devices around common industrial logic levels. With the -40°C to +100°C junction specification, the device is suitable for extended-temperature control cabinets when the complete system also satisfies its isolation, surge, and environmental requirements.

🌐

Industrial Communications Gateways

The XC7A100T-L1FGG484I can serve as the programmable protocol and routing element in an industrial communications gateway. Parallel interfaces and dedicated I/O allow it to connect local transceivers and sensors to a processor or embedded network controller, while its logic resources support packet classification, buffering, and timing adaptation. The 4,976,640 RAM bits can hold queues and protocol workspaces without immediately relying on external memory. A designer should use the -1 timing grade only after confirming that the selected transceiver rates, packet-processing paths, and clock domains close timing with adequate margin.

📺

Machine Vision and Imaging Preprocessing

The XC7A100T-L1FGG484I is well matched to machine-vision preprocessing because its programmable logic can capture sensor data, perform thresholding, line and pixel processing, and interface with image sensors or frame buffers. The FPGA's 101,440 logic elements and block RAM support parallel pipelines where deterministic latency is more useful than general-purpose software execution. Its 250 user I/O pins can accommodate camera-control signals, parallel data lanes, and synchronization inputs. Clocking, input timing, and high-speed PCB routing remain critical, so the implementation should use the intended sensor timing and I/O standards during constraints and timing analysis.

🔧

Digital Signal Processing and Control

The XC7A100T-L1FGG484I can implement parallel digital signal processing and embedded control functions in instruments, power systems, and real-time measurement equipment. Programmable logic blocks support filters, correlators, fixed-point arithmetic, and control algorithms, while block RAM supports circular buffers and sample histories. The -1 speed grade should be matched against the required sample rate and clock frequency, while the 0.95 V to 1.05 V core specification defines the regulated core rail. For production designs, include DSP resource utilization, timing closure, thermal margin, and power estimation at the expected utilization rather than relying on logic-element count alone.

🖥️

Instrumentation and Test Equipment

The XC7A100T-L1FGG484I is useful in compact instrumentation equipment where deterministic acquisition, sequencing, and data preparation are required. Its configurable logic can execute control state machines, generate stimulus patterns, coordinate ADC or DAC interfaces, and reduce acquired data before transfer to a host processor. The 250 user I/O pins provide room for multiple measurement channels and digital controls, and the block RAM supports sample buffering. Because FGG484 is a fine-pitch flip-chip BGA, board assembly requires controlled solder-paste volume, adequate thermal cycling, and careful power-plane design, with the final pin and bank assignments taken directly from the package documentation.

🧩

Embedded Security and Access Control

The XC7A100T-L1FGG484I can consolidate access-control logic, credential processing, event logging, and communications interfaces in a compact embedded platform. Its programmable logic supports concurrent protocol handling, while block RAM provides space for keys, tokens, counters, and audit records when the architecture permits secure storage in the selected implementation. The device should not be treated as automatically secure; key protection, bitstream encryption, configuration access, debug-port settings, and recovery behavior must be addressed explicitly. Thermal and timing reviews should cover encryption engines, external nonvolatile memory interfaces, and any real-time response requirements.

What are the key specifications of XC7A100T-L1FGG484I that engineers should know?
The XC7A100T-L1FGG484I is a -1-speed-grade Artix-7 FPGA with 101,440 logic elements, 7,925 logic array blocks, 4,976,640 bits of block RAM, and 250 user I/O pins. Its core supply range is 0.95 V to 1.05 V, and its industrial junction-temperature specification is -40°C to +100°C. According to the AMD Artix-7 datasheet and product information, the device is packaged in the 484-BBGA FGG484 package.
Where can I download the XC7A100T-L1FGG484I datasheet PDF?
The XC7A100T-L1FGG484I datasheet PDF is accessible through the AMD datasheet link on this page. The linked Artix-7 documentation covers device parameters and switching characteristics, while AMD's package pinout resources provide the FGG484 ball assignments in ASCII TXT and CSV formats. Use the pin-description table in those documents when assigning every FGG484 ball and selecting an I/O standard.
Where can I find the XC7A100T-L1FGG484I pinout and FGG484 package data?
The XC7A100T-L1FGG484I pinout is found in AMD's Artix-7 package device pinout files and the 7 Series FPGAs Packaging and Pinout Specification referenced by AMD as UG475. The package contains 484 balls and is identified as FGG484 in the device ordering code. Confirm bank voltage, configuration pins, user I/O, ground, and supply assignments against the exact FGG484 package file before schematic capture.
What is the XC7A100T-L1FGG484I used for in industrial and embedded systems?
The XC7A100T-L1FGG484I is used when a compact board needs programmable digital logic, parallel interfaces, block RAM, and DSP processing in one device. Its 101,440 logic elements support moderate-complexity control and data-processing designs, while 250 user I/O pins connect converters, memories, sensors, and communications circuits. The -40°C to +100°C junction specification suits industrial equipment requiring extended-temperature operation.
XC7A100T-L1FGG484I vs XC7A100T-2FGG484I: which is better for a new design?
The XC7A100T-L1FGG484I is preferable when the design specifically calls for the -1 speed grade and industrial-temperature operation. The XC7A100T-2FGG484I provides a faster device grade in the same FGG484 footprint, so it may offer better timing margin when critical paths cannot close at -1 speed. Both provide the same 100-density FPGA architecture and 101,440 logic elements, but the exact timing and power behavior must be checked for the selected design.
Is XC7A100T-2FGG484I a drop-in replacement for XC7A100T-L1FGG484I?
The XC7A100T-2FGG484I can be used as a board-compatible migration option because it uses the same FGG484 package and XC7A100T device density, but it is not electrically identical in performance. The -2 speed grade has different timing characteristics from the -1 grade, so rerun implementation, verify timing, confirm power margins, and review configuration and system timing before treating it as a drop-in replacement.
When should I choose XC7A100T-L1FGG484I over a faster Artix-7 grade?
Choose the XC7A100T-L1FGG484I when its -1 timing grade meets the design's clock and I/O requirements and the specified industrial-temperature range is appropriate. A faster -2 or -3 grade can provide additional timing margin, but it should not be selected without evaluating power, thermal behavior, and worst-case timing. Confirm the exact I/O timing requirements, clock targets, and system power budget.
What is the best drop-in replacement for XC7A100T-L1FGG484I?
The closest same-footprint replacements are the Artix-7 XC7A100T variants in the FGG484 package, including the -1, -2, and -3 speed grades and corresponding industrial or commercial temperature suffixes. These options retain the 484-ball footprint and 100-density device architecture, but the speed grade and temperature rating change. For a genuine drop-in substitution, confirm package ball mapping, temperature grade, timing closure, bitstream compatibility, and lifecycle requirements.
Can another Artix-7 density replace XC7A100T-L1FGG484I without PCB changes?
A lower-density Artix-7 device in the same FGG484 package may use the same physical board outline, but it does not necessarily preserve the complete pin function or I/O capacity. AMD's migration guidance notes that some smaller-density devices have additional no-connect balls, so the exact package file must be compared. Treat density migration as a design review involving pins, banks, configuration, memory interfaces, and timing rather than an automatic substitution.
What is the difference between XC7A100T-L1FGG484I and XC7A100T-1FGG484I?
Both identifiers denote the XC7A100T Artix-7 device in the FGG484 package with -1 speed-class ordering and industrial-temperature identification, but the ordering strings use different AMD/Xilinx nomenclature conventions. The available product listings treat the two forms as the same device family. Before procurement, confirm the full decoded ordering information, package marking, and whether the current device-generation nomenclature uses the L1 prefix.
How much power does the XC7A100T-L1FGG484I consume?
Power consumption for the XC7A100T-L1FGG484I depends on the selected speed grade, utilized logic, I/O activity, configured memories, DSP usage, and ambient conditions. The core operating voltage is 0.95 V to 1.05 V, but a complete power budget also requires the auxiliary I/O and configuration rails. Use the AMD power-estimation methodology with the intended clocking, utilization, and environmental assumptions.
How should power and ground balls be connected for XC7A100T-L1FGG484I?
Follow the exact FGG484 power, ground, and decoupling requirements in the AMD package pinout and 7 Series packaging documentation. Place the required bypass capacitors close to their associated supply and ground balls, provide low-impedance planes, and account for the BGA solder-ball escape geometry. Electrical validation should include voltage sequencing, transient response, ground bounce, and the power demands of attached memories and I/O devices.
Is XC7A100T-L1FGG484I suitable for industrial automation and factory control?
The XC7A100T-L1FGG484I is suitable for industrial automation when the system requires programmable real-time control, multiple I/O channels, and an extended-temperature FPGA grade. Its 250 user I/O pins can support digital sensors, actuator interfaces, communications, and external memory, while 4,976,640 RAM bits support local buffering and stateful logic. The -40°C to +100°C junction specification covers extended-temperature equipment conditions.
What tools and design resources are available for XC7A100T-L1FGG484I?
The XC7A100T-L1FGG484I is supported by AMD's FPGA implementation flow for synthesis, implementation, programming, and bitstream generation. The Artix-7 datasheet defines device characteristics, UG475 supplies package and pinout guidance, and the AMD package pinout files provide machine-readable FGG484 assignments. Match the installed tool version and device support to the selected speed grade and package before generating production programming files.
Where to buy XC7A100T-L1FGG484I online and what is its current price?
Use the Request a Quote form on this page to ask for XC7A100T-L1FGG484I availability, current unit pricing, and lead time. The exact MPN appears in current product listings and the manufacturer datasheet index, but pricing and inventory can change without notice. Include your required quantity, date code preference, packaging needs, and shipment destination so the quote can reflect the correct FGG484 configuration.
What is the lead time and stock status for XC7A100T-L1FGG484I?
Submit an XC7A100T-L1FGG484I request through the Request a Quote form on this page to obtain the current stock position, factory lead time, and available quantity. Lead time depends on market conditions, allocation, date-code requirements, and order quantity. A live availability statement should be confirmed for the full ordering code, including the -1 speed grade and FGG484 package suffix.
What is the best Advanced Micro Devices equivalent for XC7A100T-L1FGG484I?
The closest Advanced Micro Devices equivalents are same-density XC7A100T devices in the FGG484 package, such as the -1, -2, and -3 speed-grade variants with different commercial or industrial temperature suffixes. No independent cross-brand drop-in FPGA is established by the available cross-reference information. Validate the AMD replacement through timing analysis, pin comparison, thermal review, and bitstream or configuration compatibility testing.

Dados de referência de engenharia para XC7A100T-L1FGG484I — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the XC7A100T-L1FGG484I when the design has been timed to the -1 speed grade, requires the industrial -40°C to +100°C junction range, and targets the 484-BBGA FGG484 footprint. Choose XC7A100T-1FGG484I when the current ordering convention omits the L1 prefix but the decoded device remains equivalent. Use XC7A100T-2FGG484I or XC7A100T-3FGG484E when additional timing margin is required, accepting that speed grade changes power and timing behavior. XC7A100T-2FGG484C may suit a commercial-temperature design, but it should not replace an industrial-temperature requirement without a thermal review. A lower-density Artix-7 part should be considered only after comparing every package ball because unused positions do not guarantee identical bank, configuration, or I/O functions. For every replacement, rerun synthesis or device mapping, implementation, timing analysis, power estimation, and hardware validation before production release.

Comparação com alternativas

Parâmetro Este produto XC7A100T-1FGG484I XC7A100T-2FGG484I XC7A100T-3FGG484E XC7A100T-2FGG484C XC7A100T-2FG484I
Brand Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices
Package 484-BBGA FGG484 484-BBGA FGG484 484-BBGA FGG484 484-BBGA FGG484 484-BBGA FGG484 484-BBGA package
FPGA Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Logic Elements 101,440 logic elements 101,440 logic elements 101,440 logic elements 101,440 logic elements 101,440 logic elements 101,440 logic elements
Logic Array Blocks 7,925 logic array blocks 7,925 logic array blocks 7,925 logic array blocks 7,925 logic array blocks 7,925 logic array blocks 7,925 logic array blocks
Block RAM 4,976,640 RAM bits 4,976,640 RAM bits 4,976,640 RAM bits 4,976,640 RAM bits 4,976,640 RAM bits 4,976,640 RAM bits
User I/O Pins 250 user I/O pins 250 user I/O pins 250 user I/O pins 250 user I/O pins 250 user I/O pins 250 user I/O pins
Core Supply Voltage 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V 0.95 V to 1.05 V
Speed Grade -1 speed grade -1 speed grade -2 speed grade -3 speed grade -2 speed grade -2 speed grade

Principais diferenciais

  • Maintains the full XC7A100T resource density across the listed FGG484 alternatives (vs XC7A100T-1FGG484I)
  • The -2 option provides a higher performance grade on the same board footprint (vs XC7A100T-2FGG484I)
  • A three-grade performance alternative is available without changing the 484-ball package family (vs XC7A100T-3FGG484E)
  • Same-density options avoid the resource reduction associated with smaller Artix-7 devices (vs XC7A100T-35T-1FGG484I)

Notas de projeto

Build the power tree around the 0.95 V to 1.05 V core requirement and the separate bank and auxiliary rails identified in the FGG484 package documentation. Place the required bypass capacitors directly beside their associated BGA balls and use uninterrupted, low-impedance power and ground planes. Validate voltage sequencing, startup current, and transient response with the intended memories and I/O loads, then compare the measured or estimated power against the thermal design limit.

Use AMD's Artix-7 FGG484 pinout files and UG475 during schematic and PCB layout rather than inferring BGA assignments from a generic footprint. Confirm each ball's bank voltage, I/O standard, configuration function, and power-ground classification against the exact device ordering code. Keep sensitive configuration and clock paths short, preserve the recommended ball escape and via arrangements, and verify pad, solder-mask, and paste geometry for the manufacturer's assembly recommendations.

Do not treat the XC7A100T-1FGG484I, XC7A100T-2FGG484I, and XC7A100T-3FGG484E options as timing-identical devices. A faster grade can change path delay, power, and bitstream performance, while a commercial-temperature suffix can reduce the allowable junction-temperature range. Before substitution, compare the decoded ordering information, rerun timing and power analysis, and confirm that configuration, memory interfaces, and production programming files remain valid for the selected part.

Thermal performance depends on the implemented design, board copper, airflow, and the difference between ambient and junction temperature. Estimate utilization-dependent core and I/O power before selecting copper area or a cooling strategy. Use the device's documented thermal characteristics for the FGG484 package and test the assembled board at maximum expected clock, I/O, and memory activity. Preserve airflow around the BGA region and avoid concentrating heat sources directly beneath the FPGA.

Constrain every external interface according to the actual clocking and I/O topology rather than applying one universal constraint to all 250 user I/O pins. Use the appropriate board-transmission-line model for high-speed edges, account for package and via parasitics, and maintain continuous return paths. Configuration pins, clock inputs, and interfaces with external memories deserve particular review because incorrect routing or timing constraints can prevent reliable startup or cause intermittent data errors.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The available product information identifies an industrial-temperature Artix-7 FPGA but does not provide component-level RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

xc7a100t datasheet xc7a100t fpga xc7a100t 1fgg484i xc7a100t fgg484 XC7A100T-L1FGG484I datasheet XC7A100T-L1FGG484I pinout XC7A100T-L1FGG484I equivalent XC7A100T-L1FGG484I replacement XC7A100T-L1FGG484I vs XC7A100T-2FGG484I XC7A100T-L1FGG484I FGG484 application circuit XC7A100T-L1FGG484I price XC7A100T-L1FGG484I stock

Componentes & termos relacionados

Advanced Micro Devices AMD XC7A100T-L1FGG484I XC7A100T-1FGG484I XC7A100T-2FGG484I XC7A100T-3FGG484E XC7A100T-2FGG484C Artix-7 field-programmable gate array FPGA programmable logic logic array block block RAM digital signal processing 484-BBGA FGG484 package flip-chip BGA surface-mount technology programmable input/output user I/O core supply voltage speed grade industrial temperature grade UG475
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ